suppose of zinc chloride is dissolved in of a aqueous solution of potassium carbonate. calculate the final molarity of zinc cation in the solution. you can assume the volume of the solution doesn't change when the zinc chloride is dissolved in it.

The molar mass of the unknown non-electrolyte liquid is given as

256 g/mol, option A.

The ratio between the mass and the amount of substance (measured in moles) of any sample of a chemical compound is known as the molar mass (M) in chemistry. The molar mass of a material is a bulk attribute rather than a molecular one.

ΔTemp.f = i x Kf x b

where,

ΔTemp.f = the freezing-point depression;

i = the Van't Hoff factor

Kf = the cryoscopic constant of the solvent;

b = the molality of the solution.

                   = 1.32/(1*1.86)

                   = 0.71 mol/kg

            0.71 mol/kg * 1kg/1000g

             = 0.00071 mol/g.

              Number of moles = mass * molality

              = 0.00071 * 110

              = 0.078 mol.

          Molar mass (g/mol) = mass/number of moles

          Mass of solute (liquid) = 20g

          Molar mass = 20/0.078

          = 256.2 g/mol. ≈ 256 g/mol

Therefore, molar mass of the unknown liquid is 256.2 g/mol.

Learn more about Molar mass:

https://brainly.com/question/837939

#SPJ4

Complete question:

A solution containing 20.0 g of an unknown non-electrolyte liquid and 110.0 g water has a freezing point of -1.32 °c. given kf = 1.86°c/m for water, the molar mass of the unknown liquid is ____g/mol.

A)256B) 69.0 C) 619 D) 78.1

The molar mass of the unknown liquid is 256.5 g/mol.To solve this problem, we can use the formula for calculating the freezing point depression: ΔTf = Kf·m·i

where ΔTf is the change in freezing point (in °C), Kf is the freezing point depression constant (in °C/m), m is the molality of the solution (in mol/kg), and i is the van't Hoff factor (which is 1 for non-electrolytes).

First, we need to calculate the molality of the solution:

molality = moles of solute / mass of solvent (in kg)

We know that the mass of the solvent (water) is 110.0 g, which is 0.1100 kg. To find the moles of solute (the unknown liquid), we need to divide its mass (20.0 g) by its molar mass (which we don't know yet). Let's call the molar mass "M":

moles of solute = 20.0 g / M

So, the molality is:

molality = (20.0 g / M) / 0.1100 kg
molality = (20.0 / M) / 0.1100 mol/kg

Now, we can plug this into the formula for freezing point depression:

ΔTf = Kf·m·i
-1.32 = 1.86·[(20.0 / M) / 0.1100]·1

Simplifying this equation, we get:

-1.32 = 1.86·(181.8 / M)
-1.32 = 338.628 / M
M = 338.628 / 1.32
M = 256.5 g/mol

Therefore, the molar mass of the unknown liquid is 256.5 g/mol.

Learn more about freezing point here: brainly.com/question/3121416

#SPJ11

Answer:

Explanation:

The pH of the solution is 10.80

The pH of the solution is 10.80.

Explanation: This can be calculated using the Henderson-Hasselbalch equation, which takes into account the acid dissociation constant (pKa) of the acid and the concentration of the acid and its conjugate base. The HCl dissociates completely in water, so it does not affect the pH calculation.

The methylamine acts as a weak base and reacts with water to form its conjugate acid, which determines the pH of the solution.

The pKb of methylamine is used to calculate its pKa, which is then used in the Henderson-Hasselbalch equation.

Refer to this link to know more about how to calculate the pH of a solution
https://brainly.com/question/30881040?referrer=searchResults

The dipeptide structure with labels a through d represents the different functional groups and atoms present in the molecule.

Label a is located at the end of the molecule with the positively charged NH3 group, indicating the presence of an amino group. The b label is placed by the bond between the carbonyl group and the amine, indicating the presence of a peptide bond.

Label c is next to a carbon with shown single bonds to the carboxylate, a CH2OH, and the rest of the molecule, indicating the presence of a side chain. Finally, the d label is next to the carboxylate at the end of the molecule,

indicating the presence of a carboxylic acid functional group. Understanding the different functional groups and atoms present in the dipeptide structure is important in understanding its properties and behavior in chemical reactions and biological processes.

To learn more about : labels

https://brainly.com/question/29608807

#SPJ11

Electrolysis is a process that is used to electric current is passed in a solution. The mass of cu(s) is electroplated by running 23.0 a of current through a cu2 (aq) solution for 4.00 h is equals to 64 grams.

Electrolysis is a process in which an electric current is passed in a solution. Solving electrolysis problem is more on stoichiometric calculations are, coulombs = amperes x time

1 Faraday = 96,485 coulombs

1 Faraday = 1 mole of electrons

We have to determine the mass of cu(s) is electroplated by running 23.0 a of current through a Cu (aq) solution for 4.00 h. Half reaction, [tex]Cu^{2+ } + 2e^{-} --> Cu[/tex]

Current, I = 23.0 A

Time, t = 4 hours = 4 × 3600 seconds

= 14400 seconds

Calculate the moles of Copper, n=Q ×z× F

where, Q = total charge in coulombs

Computing for Q = 13.5coulomb sec (14,400 sec) = 194,400 coulomb-sec²

So, n = 194,400 coulomb-s² /(96485 coulomb)

= 1.007 moles Cu

Molar mass = 63.55 grams per mole

Molar mass is defined as the mass of substance divided by moles of substance.

=> 63.55 grams per mole = m/ 1.007 moles Cu

=> m = 63.55 g × 1.007

=> m = 64 grams

Hence, required value is 64 grams.

For more information about electrolysis, refer:

https://brainly.com/question/24063038

#SPJ4

the overlap integral simplifies to:

S = c1c2 + d1d2d1d2.

To calculate the overlap integral between two linear combinations of atomic orbitals on a carbon atom in ethene, we first need to express the orbitals in terms of the hydrogen-like atomic orbitals. Let's assume that the two orbitals are denoted as ψ1 and ψ2, and can be expressed as linear combinations of the hydrogen-like atomic orbitals ϕ1 and ϕ2 as follows:

ψ1 = c1ϕ1 + d1ϕ2
ψ2 = c2ϕ1 + d2ϕ2

where c1, d1, c2, and d2 are constants.

The overlap integral between these two orbitals can be calculated using the following formula:

S = ∫ψ1ψ2*dτ

where dτ represents the infinitesimal volume element.

Substituting for ψ1 and ψ2, we get:

S = ∫(c1ϕ1 + d1ϕ2)(c2ϕ1 + d2ϕ2)*dτ

Expanding the product, we get:

S = c1c2∫ϕ1ϕ1*dτ + c1d2∫ϕ1ϕ2*dτ + d1c2∫ϕ2ϕ1*dτ + d1d2∫ϕ2ϕ2*dτ

Since the hydrogen-like atomic orbitals are orthonormal, the integral of ϕ1ϕ2 and ϕ2ϕ1 will be zero. Therefore, we can simplify the expression as follows:

S = c1c2∫ϕ1ϕ1*dτ + d1d2∫ϕ2ϕ2*dτ

Using the orthonormality of the hydrogen-like atomic orbitals, we know that the integral of ϕ1ϕ1 and ϕ2ϕ2 will both be equal to 1. Therefore, the overlap integral simplifies to:

S = c1c2 + d1d2d1d2.

In order to calculate the value of S, we need to know the values of the constants c1, d1, c2, and d2. These constants will depend on the specific linear combinations of atomic orbitals that we are considering. Without this information, we cannot calculate the value of the overlap integral.

Visit to know more about Integral:-

brainly.com/question/22008756

#SPJ11

If two orbitals as linear combinations of two atomic orbitals on carbon atom in ethene, then value of the overlap integral [tex]S_{12} = \int{\phi_{1}}^{*}\phi_{2}d \tau[/tex], is equals to zero. So, option(b) is correct.

Orthonormal atomic orbitals are follow the following property:

Now, we have provide that two orbitals are as a linear combinations of two atomic orbitals on carbon atom in ethene. [tex]\phi_{1 } = \frac{1}{ \sqrt{2} } ( {\psi_{2s }} + {\psi_{2p }}_{2})[/tex]

[tex]\phi_{2 } = \frac{1}{ \sqrt{2} } ( \psi_{2 s} - {\psi_{2p} }_{2})[/tex]

In the ethylene molecule, consists each carbon atom is bonded to two hydrogen atoms. Therefore, for the C-H, σ bond (sp²(C) - 1s(H)) in ethylene, the two sp² hybrid orbitals overlap with the 1s orbitals of the two hydrogen atoms. Let the hydrogen-like atomic orbitals, [tex]\psi_{2 s} and {\psi_{2p} }_{2}[/tex] are orthonormal to each other. So, the overlap integral [tex]S_{12} = \int{ \phi_{1}}^{*}\phi_{2}d \tau[/tex]

[tex] = \int \frac{1}{\sqrt{2}}( \psi_{2s} + {\psi_{2p} }_{2}) \frac{1}{\sqrt{2}}( \psi_{2s} - {\psi_{2p} }_{2})d \tau\\ [/tex]

[tex] = \frac{1}{\sqrt{2}}( \int \psi_{2s}\psi_{2s} d \tau + \int {\psi_{2p} }_{2}\psi_{2s} d \tau - \int \psi_{2s} {\psi_{2p}}_{2} d \tau - \int {\psi_{2p} }_{2} {\psi_{2p} }_{2} d \tau) \\ [/tex].

Using above formula, [tex]\psi_{2 s} [/tex] and [tex]{\psi_{2p} }_{2}[/tex] are orthonormal so, [tex]\int \psi_{2 s} {\psi_{2p} }_{2} d\tau = 0[/tex]. Also [tex]\psi_{2 s} [/tex] and [tex]\psi_{2 s}[/tex] are normalised so [tex]\int \psi_{2 s} \psi_{2 s} d\tau = 1[/tex]. Similarly [tex]\int {\psi_{2p} }_{2} {\psi_{2p} }_{2} d\tau = 1 [/tex].

Substitute all integral values in equation (1),

= 1 + 0 - 0 - 1

= 0

Hence, the required integral value is 0.

For more information about atomic orbitals, visit :

https://brainly.com/question/30911211

#SPJ4

Complete question:

given two orbitals as linear combinations of two atomic orbitals on carbon atom in ethene:

[tex]\phi_{1 } = \frac{1}{ \sqrt{2} } ( {\psi_{2s }} + {\psi_{2p }}_{2})[/tex]

[tex]\phi_{2 } = \frac{1}{ \sqrt{2} } ( \psi_{2 s} - {\psi_{2p} }_{2})[/tex]

where the hydrogen-like atomic orbitals are orthonormal. what is the value of the overlap integral,

[tex] S_{12} = \int \phi_{1} \times \phi_{2}dr[/tex]

a) 1

b) 0

c) 1.5

d) 2

Answer:

data given

mass of NaCl 4.56

dissolved volume 20ml(0.02l)

density of solution 1.03g/ml

Required molality

Explanation:

molarity=m/mr×v

where

m is mass

mr molar mass

v is volume

now,

molarity=4.56/58.5×0.02

molarity =3.9

: .molarity is 3.9mol/dm^3

According to molal concentration, the concentration (in molality) of an aqueous solution of NaCl is 0.0047 mole/kg.

Molal concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution . Most commonly used unit for molal concentration is moles/kg.

The molal concentration depends on change in volume of the solution which is mainly due to thermal expansion. Molal concentration is calculated by the formula, molal concentration=mass/ molar mass ×1/mass of solvent in kg.

In terms of moles, it's formula is given as molal concentration= number of moles /mass of solvent in kg.

Substitution in formula gives the answer but first mass of solution is determined which  is density×volume= 1.03×20=20.6 g , mass of solvent= 20.6-4.56=16.05, thus molal concentration=4.56/58.5×1/16.05=0.0047 moles/kg.

Learn more about molal concentration,here:

https://brainly.com/question/4580605

#SPJ2

Answer:

Propyl methanoate

Explanation:

The ester that can be synthesized from propanol and methanoic acid is propyl methanoate (also known as methyl propanoate or propyl formate). The reaction between propanol and methanoic acid, which is a carboxylic acid, is a classic example of an esterification reaction, which results in the formation of an ester and water.

4. The number of each Race Car Part present in Container A are:

5. To draw the maximum number of cars that can be made from the parts in Container A:

Each car requires 1 Body (B), 4 Tires (Tr), 1 Engine (E), and 2 Cylinders (Cy).

We have 3 Bodies (B), 10 Cylinders (Cy), 2 Engines (E), and 9 Tires (Tr).

The limiting parts are the Engines (E) and the Cylinders (Cy), since we don't have enough of either part to build more than 2 cars.

Therefore, we can build a maximum of 2 complete cars from the parts in Container A, and we will have excess parts remaining:

1 Body (B)

6 Tires (Tr)

0 Engines (E)

6 Cylinders (Cy)

6. The student is incorrect because although there are 3 car bodies in Container A, we also need 4 tires, 1 engine, and 2 cylinders for each car. We don't have enough engines or cylinders to build 3 complete cars, so the number of bodies is not the limiting factor.

7. a. To determine the number of complete cars that can be built:

Each car requires 1 Body (B), 4 Tires (Tr), 1 Engine (E), and 2 Cylinders (Cy).

We have a large number of Bodies (B) and Tires (Tr), so we don't need to worry about those parts.

We only have 5 Engines (E) and 12 Cylinders (Cy).

The limiting part is the Cylinders (Cy), since each car requires 2 cylinders and we only have 12.

Therefore, we can build a maximum of 6 complete cars with the available parts:

6 Bodies (B)

24 Tires (Tr)

5 Engines (E)

12 Cylinders (Cy)

b. The limiting part is the Cylinders (Cy), since we only have enough cylinders to build 6 cars, but we have enough engines to build 5 times as many cars.

Find out more on limiting reagents here: https://brainly.com/question/19033878

#SPJ1

The outcomes to the scan had been now not all similar. The pots with the pH of 5.0 had no growth whatsoever. The pots with the pH of 6.0 had little growth, each with only four blades of grass. The pots with a pH of 7.0 grew well, one pot with extra blades of grass than the other, an average of 11 blades of grass

Natural soil pH depends on the rock from which the soil was once fashioned (parent material) and the weathering procedures that acted on it—for instance climate, vegetation, topography and time. These approaches have a tendency to purpose a decreasing of pH (increase in acidity) over time.

There is disruption of nutrient absorption by way of the plants if it's pH increases, and hence, soil fertility is reduced, alkaline soil's pH does not lead to make bigger in nutrient absorption, soil illness does not happen.

Learn more about  effect of pH on plant growth here:

2,3-dimethylbuta-1,3-diene is not a structural isomer of hexyne. Option e is correct.

Structural isomers are molecules with the same chemical formula but different arrangements of atoms. Hexyne is a hydrocarbon with six carbon atoms and one triple bond. Option (e), 2,3-dimethylbuta-1,3-diene, is not a structural isomer of hexyne because it has a different number of carbon atoms and a different type of bond. It has four carbon atoms and two double bonds, whereas hexyne has six carbon atoms and one triple bond.

Options (a), (b), (c), and (d) are all structural isomers of hexyne because they have the same number of carbon atoms and the same type of bond but different arrangements of atoms. Hence, option e is correct.

To know more about isomer, here

brainly.com/question/13422357

#SPJ4

Ammonia ionizes only partially in water. Option 4 is correct.

When ammonia dissolves in water, it reacts with water to form ammonium ions (NH₄⁺) and hydroxide ions (OH⁻), according to the equation: NH₃ + H₂O ⇌ NH₄⁺ + OH⁻. However, this reaction is reversible and only a small fraction of ammonia molecules ionize to form ions. As a result, ammonia is classified as a weak electrolyte, meaning that it only conducts electricity weakly in solution.

Weak electrolytes are characterized by their partial ionization in solution, and they have relatively low electrical conductivity compared to strong electrolytes, which ionize completely in solution. Hence Option 4 is correct.

To learn more about Weak electrolytes, here

https://brainly.com/question/29771118

#SPJ4

This weather map shows that there is a low pressure system in the north and a high pressure system in the south.

Weather is the study of atmospheric conditions that exist in a specific area over a short period of time. It is the sum of all atmospheric conditions including temperature, humidity, wind, air pressure, cloud cover and precipitation. Weather is an important factor in determining the temperature, humidity and other characteristics of the environment. It affects human activities such as agriculture, transportation and recreation. Weather is dynamic and constantly changing. It is affected by a variety of factors such as solar radiation, air pressure, ocean currents, land topography and human activities. Weather is also affected by climate, which is the average weather pattern over a long period of time. Understanding weather is important for many reasons, including to predict storms and floods, to plan for extreme weather events, and to prepare for natural disasters.

This weather map shows that there is a low pressure system in the north and a high pressure system in the south. The low pressure system is bringing cooler temperatures and precipitation, while the high pressure system is bringing warmer temperatures and clear skies. There is a cold front moving eastward from the north, and a warm front moving eastward from the south.

To learn more about weather

https://brainly.com/question/29709289

#SPJ9

The amount of excess reagent that will remain would be 11.76 g.

To determine the excess reagent in the reaction, we need to first determine which reactant is limiting and which reactant is in excess.

The balanced chemical equation for the reaction is:

6Na + Fe2O3 -> 3Na2O + 2Fe

The molar mass of Na is 23 g/mol, and the molar mass of Fe2O3 is 159.69 g/mol (2 x 55.85 g/mol for Fe + 3 x 16 g/mol for O).

Using the given masses, we can calculate the number of moles of each reactant:

According to the balanced chemical equation, 6 moles of Na react with 1 mole of Fe2O3. Therefore, the number of moles of Na required to react with 1.57 mol of Fe2O3 is:

(1.57 mol Fe2O3) x (6 mol Na/1 mol Fe2O3) = 9.42 mol Na

Since we only have 8.70 mol of Na available, it is the limiting reagent. This means that Fe2O3 is in excess.

To determine the amount of excess Fe2O3, we need to calculate how much Fe2O3 is required to react with 8.70 mol of Na:

(8.70 mol Na) x (1 mol Fe2O3/6 mol Na) x (159.69 g/mol Fe2O3) = 238.24 g Fe2O3

Since we only have 250 g of Fe2O3, the amount of excess Fe2O3 is:

250 g - 238.24 g = 11.76 g

Therefore, the amount of excess Fe2O3 left after the reaction is 11.76 g.

More on stoichiometry can be found here: https://brainly.com/question/29775083

#SPJ1

Answer:

condensation nuclei

Explanation:

Answer: Because its dissolution is exothermic

Explanation:

A solution of hydrofluoric acid with a concentration of 0.236 M and a pKa of 3.15 is used to prepare a buffer with a pH of 3.773.

To prepare a buffer with a pH of 3.773, we can use the Henderson-Hasselbalch equation:

pH = pKa + log([A-]/[HA])

where pH is the desired pH of the buffer, pKa is the dissociation constant of hydrofluoric acid, [A-] is the concentration of the conjugate base (KF) and [HA] is the concentration of the acid (HF).

Rearranging the Henderson-Hasselbalch equation, we get:

[A-]/[HA] = [tex]10^(^p^H ^- ^p^K^a^)[/tex]

Substituting the given values, we get:

[A-]/[HA] = [tex]10^(^3^.^7^7^3^ - ^3^.^1^5^)[/tex] = 1.738

We also know that the total concentration of the buffer solution is the sum of the concentrations of the acid and the conjugate base:

[HA] + [A-] = 0.236 M

Solving these two equations simultaneously for [A-] and [HA], we get:

[A-] = 0.145 M

[HA] = 0.091 M

The molar mass of KF is 58.10 g/mol. To calculate the mass of KF required to make the buffer, we need to first calculate the number of moles of KF needed:

moles of KF = [A-] x volume of buffer

moles of KF = 0.145 x 2.00 = 0.290

Finally, we can calculate the mass of KF required:

mass of KF = moles of KF x molar mass of KF

mass of KF = 0.290 x 58.10 = 16.809 g

Therefore, 16.809 grams of solid potassium fluoride should be added to 2.00 L of a 0.236 M hydrofluoric acid solution to prepare a buffer with a pH of 3.773.

Learn more about Henderson-Hasselbalch equation

brainly.com/question/13423434

#SPJ11

When an electron transitions from a higher energy state to a lower energy state within an atom, it releases energy in the form of a photon.

The energy of this photon is given by the difference between the energy levels of the initial and final states of the electron. In this case, the electron transitions from a state with energy 3.89 eV to a state with energy 1.44 eV. The energy released in this transition is: ΔE = E₂ - E₁ = 1.44 eV - 3.89 eV = -2.45 eV

Note that the negative sign indicates that energy is being released.
We can now use the relationship between energy and wavelength for a photon: E = hc/λ
where h is Planck's constant (6.626 x 10^-34 J s), c is the speed of light (2.998 x 10^8 m/s), and λ is the wavelength of the photon. Rearranging this equation to solve for λ, we get: λ = hc/E

Plugging in the values we know, we get:
λ = (6.626 x 10^-34 J s)(2.998 x 10^8 m/s)/(-2.45 eV x 1.602 x 10^-19 J/eV)
Note that we converted electron volts (eV) to joules (J) using the conversion factor 1.602 x 10^-19 J/eV.
Simplifying this expression, we get: λ = 507 nm, Therefore, the wavelength of the photon emitted by the electron transition is 507 nm.

To know more about atom click here

brainly.com/question/13973654

#SPJ11

The root mean square speed of F2 Gas molecules under the same conditions is approximately 582.19 m/s

Given: Average kinetic energy (E_k) = 6430 J/mol
Molar mass of F2 = 2 * Molar mass of F = 2 * 19 g/mol = 38 g/mol (since F has a molar mass of 19 g/mol)

First, let's convert the molar mass of F2 from grams to kilograms:
Molar mass of F2 = 38 g/mol * (1 kg/1000 g) = 0.038 kg/mol

Now, we can use the equation for the average kinetic energy to determine the root mean square speed (v_rms):

E_k = (3/2) * R * T = (1/2) * m * v_[tex]rms^{2}[/tex]

Where R is the universal gas constant (8.314 J/mol K) and T is the temperature in Kelvin.

Since we want to find v_rms, we can rearrange the equation as follows:

v_[tex]rms^{2}[/tex] = (2 * E_k) / m

Plugging in the given values:

v_[tex]rms^{2}[/tex] = (2 * 6430 J/mol) / 0.038 kg/mol = 338947.37[tex]m^{2}/ s^{2}[/tex]

Finally, we take the square root to find the root mean square speed: a

v_rms = √338947.37[tex]rms^{2}[/tex] = 582.19 m/s

So, the root mean square speed of F2 gas molecules under the same conditions is approximately 582.19 m/s.

For More Such Questions on Gas

https://brainly.com/question/24719118

#SPJ11

The atmospheric pressure on top of Mt. Everest is 250 mmHg and 0.328 atm, when rounded to 3 significant digits.

Pressure is a force that is exerted over a surface area. It is the amount of force applied to an object per unit area. Pressure is typically expressed in units of force per unit of area, such as pounds per square inch (psi) or pascals (Pa). Pressure is an important factor in many areas of engineering, physics, chemistry, and biology.

Atmospheric pressure can be measured in torr (1 Torr = 1mmHg), atm (1 atm = 760mmHg) or in kPa (1 atm = 101.3kPa).
250 torr = 250 mmHg
250 mmHg / 760 mmHg = 0.328 atm

To learn more about Pressure

https://brainly.com/question/30235826

#SPJ1

The value of Kp at 90°C is zero. This indicates that the decomposition of baking soda at this temperature is essentially complete, and the equilibrium lies far to the right.

We can use the expression for the equilibrium constant Kp, which is given by:

Kp = (P([tex]CO_{2}[/tex] ) × P([tex]H_{2} O[/tex])) / (P([tex]Na_{2} CO_{3}[/tex] ))

where P([tex]CO_{2}[/tex]), P([tex]H_{2} O[/tex]), and P([tex]Na_{2} CO_{3}[/tex]) are the partial pressures of carbon dioxide, water vapor, and sodium carbonate, respectively, at equilibrium.

From the balanced equation, we know that for every 2 moles of [tex]NaHCO_{3}[/tex]that decompose, 1 mole of [tex]CO_{2}[/tex] is produced. Therefore, the partial pressure of [tex]CO_{2}[/tex] can be calculated as:

P([tex]CO_{2}[/tex] ) = (1/2) × (total pressure) = 0.2726 atm

Similarly, for every 2 moles of [tex]NaHCO_{3}[/tex] that decompose, 1 mole of Na2CO3 is produced. Therefore, the partial pressure of [tex]Na_{2} CO_{3}[/tex]can be calculated as:

P([tex]Na_{2} CO_{3}[/tex]) = (1/2) × (total pressure) = 0.2726 atm

Finally, the partial pressure of water vapor can be calculated as the difference between the total pressure and the partial pressures of CO2 and [tex]Na_{2} CO_{3}[/tex]:

P([tex]H_{2} O[/tex]) = (total pressure) - P([tex]CO_{2}[/tex]) - P([tex]Na_{2} CO_{3}[/tex]) = 0.5451 - 0.2726 - 0.2726 = 0.0 atm

This means that there is no water vapor present at equilibrium, and we can assume that its partial pressure is zero. Substituting these values into the expression for Kp, we get:

Kp = (P([tex]CO_{2}[/tex]) × P([tex]H_{2} O[/tex])) / (P([tex]Na_{2} CO_{3}[/tex]))

= (0.2726 × 0.0) / 0.2726

= 0.0

Therefore, the value of Kp at 90°C is zero. This indicates that the decomposition of baking soda at this temperature is essentially complete, and the equilibrium lies far to the right.

Learn more about temperature ,

https://brainly.com/question/11464844

#SPJ4

The pH at which the molecule will be predominantly in its ionized state depends on the pKa values of the functional groups and the pH of the solution.

To determine the pH of a molecule with three functional groups, we need to consider the pKa values of each group and the pH of the solution. The pKa values represent the pH at which 50% of the functional group is ionized and 50% is in the non-ionized form.

If the pH is below the pKa of a functional group, the group will be mostly in the protonated (non-ionized) form. If the pH is above the pKa, the group will be mostly in the deprotonated (ionized) form.

Therefore, we need to determine the pKa values of each functional group and the pH at which each group is mostly ionized or non-ionized. For example, if a molecule has a carboxylic acid group (pKa = 4.5), an amine group (pKa = 9.5), and a phenol group (pKa = 10), we can use the following table to determine the predominant ionization state at different pH values:

pH    Carboxylic acid       Amine              Phenol

1           Protonated        Protonated         Protonated
4.5      Half ionized        Protonated         Protonated
7      Mostly ionized      Half ionized         Protonated
9.5   Mostly ionized      Mostly ionized    Half ionized
10     Mostly ionized      Mostly ionized    Mostly ionized
14      Deprotonated      Deprotonated     Deprotonated

Therefore, the pH at which the molecule will be predominantly in its ionized state depends on the pKa values of the functional groups and the pH of the solution.

For more such questions on predominant ionization state, visit:

brainly.com/question/30882629

#SPJ11

The incorrect statement for entropy is the entropy is larger when a dissolved salt in a liquid is uniform or spread throughout the liquid than when it is highly concentration in a small portion of the liquid. The answer to this question is A..

For more information on entropy kindly visit to

https://brainly.com/question/15025401

#SPJ1

Both options (a) and (b) are evidence for a chemical reaction.

In option (a), the yellow flame is an indication that a chemical reaction has occurred between the sodium metal and water, producing hydrogen gas and sodium hydroxide.

In option (b), the gas bubbles produced indicate that a chemical reaction has occurred between the iron metal and the acid, producing hydrogen gas and iron(II) ions. Based on the given options, evidence for a chemical reaction can be observed in both (a) and (b).

In (a), dropping sodium metal into water produces a yellow flame, indicating a chemical reaction as new substances are formed. In (b), dropping iron metal into acid produces gas bubbles, which also signifies a chemical reaction as a new product, in this case gas, is generated.

To learn more about chemical reaction click here

brainly.com/question/29039149

#SPJ11

If 120 cm³ of oxygen gas is collected at 713.3 mm Hg pressure, the volume of the dry gas at STP is 0.102 cm³.

To solve this problem, we will use the ideal gas law, which relates the pressure, volume, temperature, and number of moles of a gas:

PV = nRT

First, we need to convert the given conditions to the correct units. The temperature is already in Celsius, so we need to convert it to kelvins by adding 273.15:

T = 27 + 273.15 = 300.15 K

The pressure is given in millimeters of mercury (mm Hg), so we need to convert it to atmospheres (atm) to use in the ideal gas law. There are 760 mm Hg in 1 atm, so:

P = 713.3 mm Hg / 760 mm Hg/atm = 0.938 atm

Next, we can use the ideal gas law to find the number of moles of oxygen gas:

n = PV/RT = (0.938 atm)(120 cm³)/(0.08206 L·atm/(mol·K))(300.15 K) = 0.00454 mol

Finally, we can use the molar volume of a gas at STP (standard temperature and pressure) to find the volume of the dry gas at STP. At STP, the temperature is 273.15 K and the pressure is 1 atm. The molar volume of a gas at STP is 22.4 L/mol, so:

V = n(22.4 L/mol) = (0.00454 mol)(22.4 L/mol) = 0.102 cm³

Therefore, the volume of the dry gas at STP is 0.102 cm³.

Learn more about ideal gas law here:

https://brainly.com/question/28257995

#SPJ1

The {H⁺} of the solution is 2.238 × 10^(-12) M.

pH is a measure of the acidity or basicity of an aqueous solution. It is defined as the negative logarithm (base 10) of the concentration of hydrogen ions ([H+]) in moles per liter. The pH scale ranges from 0 to 14, where a pH of 7 is neutral. Solutions with a pH less than 7 are acidic, while solutions with a pH greater than 7 are basic (also called alkaline).

The pH of a solution is defined as:

pH = -log[H⁺]

Rearranging the equation, we get:

[H⁺] = 10^(-pH)

Substituting the given value of pH, we get:

[H⁺] = 10^(-11.55)

[H⁺] = 2.238 × 10^(-12) M

To know more about pH, here

brainly.com/question/491373

#SPJ4

The decrease in the second ionization energy of alkali metals going down the group is due to the increase in atomic radius.

As the atomic radius increases, the distance between the nucleus and the outermost electron increases, which reduces the coulombic force of attraction between the nucleus and the electron.

This reduced coulombic force of attraction reduces the energy required to remove the electron, thus resulting in a decrease in the ionization energy. Additionally, due to the increased number of electrons, the effective nuclear charge decreases, which further reduces the force of attraction between the nucleus and the electron, thus resulting in a further decrease in the ionization energy.

Therefore, the decrease in the second ionization energy of alkali metals going down the group can be attributed to a decrease in the coulombic force of attraction due to the increase in atomic radius and the decrease in the effective nuclear charge.

know more about Alkali metals here

https://brainly.com/question/5063184#

#SPJ11

If a glass manufacturer has only a few costly ways of reducing pollutants, it will end up paying the pollution tax, option A.

A chemical or energy that is introduced into the environment and has negative consequences or reduces the usability of a resource is referred to as a pollutant or new entity. These can be either anthropogenic in origin (i.e., produced materials or results of biodegradation) or naturally formed (i.e., minerals or extracted chemicals like oil). When pollutants are present in sufficient quantities to have noticeable detrimental effects on the environment or public health, pollution results.

By altering the development rate of plant or animal species, or by affecting human amenities, comfort, health, or property values, a pollution may inflict long- or short-term damage.

Learn more about Pollutants:

https://brainly.com/question/31449907

#SPJ4

Complete question:

If a glass manufacturer has only a few ________________ of reducing pollutants, it will ____________________ .

A. costly ways; end up paying the pollution tax.

B. inexpensive ways; incur the pollution tax instead.

C. costly ways; do so to minimize its pollution taxes.

D. inexpensive ways; buy the most expensive technology.

The base name for an ester with a propyl group attached to the carbonyl carbon atom is "propyl ester." In the context of a simulation, you would need to extend the left chain according to the given parameters within the simulation for the specific compound you are working with.

If we extend the left chain of an ester with a propyl group attached to the carbonyl carbon atom as far as the simulation allows, we would have the following structure:

CH3-(CH2)2-C(=O)-OR

Where R represents the rest of the ester molecule.The base name for an ester with a propyl group attached to the carbonyl carbon atom is propyl propanoate. This name is derived from the parent carboxylic acid, which is propanoic acid (also known as propionic acid), and the alcohol used to form the ester, which is propanol (also known as 1-propanol or n-propanol).The esterification reaction between propanoic acid and propanol yields propyl propanoate as the ester product, with the elimination of a molecule of water. The ester is commonly used as a flavor and fragrance ingredient in various food and cosmetic products.

Learn more about  propyl  here

https://brainly.com/question/9086530

#SPJ11

The normal boiling point of methyl chloride, for a given data, is -23.8°C

The bubbling point (boiling point) of a compound is affected by numerous components, checking the quality of intermolecular powers between particles, the degree and shape of the particles, and the restraint of the particles.

When the alkyl bunches are supplanted with chlorine, the coming around compound has diverse intermolecular powers and restraints compared to the beginning compound. In common, particles with polar covalent bonds tend to have higher bubbling centers than nonpolar particles with comparable atomic weights.

Methyl chloride (CH3Cl) may be a polar molecule with a dipole scaled down due to the separation in electronegativity between carbon and chlorine. The quality of the dipole-dipole powers between particles of methyl chloride is more prominent than the quality of the van der Waals powers between particles of methane, which is the compound molded between two methyl bunches.

As a result, the bubbling point of methyl chloride is higher than the bubbling point of methane. The standard bubbling point of methane is -161.5°C, though the commonplace bubbling point of methyl chloride is -23.8°C.

In this way, the commonplace bubbling point of methyl chloride, the compound molded between the methyl collect and chlorine, is -23.8°C.

To know more about boiling point  refer to this:

https://brainly.com/question/40140

#SPJ4