tamu it is frequently necessary to perform dilutions of a stock solution in the laboratory. if you were instructed to make a 1:5 dilution of a stock solution to arrive at a final volume of 13, how much stock solution would you need to pipet?

The grams of N₂ would have to react to produce 31.5 kJ of the energy is 84 g.

The chemical equation is as :

N₂ + 3H₂   --->     2NH₃       ΔH = -96 kJ

The energy produces = 31.5 kJ

We have multiplied the factor so that the value of the enthalpy has also been multiplied.

The factor = 96 / 31.5 = 3

Thus, the balanced chemical equation is :

3N₂ + 9H₂   --->   6NH₃  

The moles of N₂ = 3 mol

The mass of the N₂ = moles × molar mass

The mass of the N₂ = 3 mol × 28 g/mol

The mass of the N₂ = 84 g

The amount of the N₂ would have to react to produce the 31.5 kJ of the energy is 84 g.

To learn more about energy here

https://brainly.com/question/14290716

#SPJ4

This question is incomplete, the complete question is :

The following thermochemical equation is for the reaction of n2 with h2 to form nh3. how many grams of n2 would have to react to produce 31.5 kj of energy?

N₂ + 3H₂   --->     2NH₃      ΔH = -96 kJ

100.0 g of oxygen gas at a pressure of 1.5 atm and a temperature of 25°C would occupy a volume of 49.2 L.

To solve this problem, we can use the Ideal Gas Law, which states:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.

We need to rearrange this equation to solve for the volume V:

V = (nRT) / P

where n is the number of moles of the gas, which we can calculate using the molar mass of oxygen gas:

n = m / M

where m is the mass of the gas and M is the molar mass of oxygen gas (32 g/mol).

n = 100.0 g / 32 g/mol = 3.125 mol

Now we can substitute the given values into the equation to find the volume:

V = (nRT) / P

V = (3.125 mol)(0.0821 L·atm/mol·K)(298 K) / 1.5 atm

V = 49.2 L

Therefore, 100.0 g of oxygen gas at a pressure of 1.5 atm and a temperature of 25°C would occupy a volume of 49.2 L.

Click the below link, to learn more about Volume of oxygen:

https://brainly.com/question/28577843

#SPJ11

All of these solutions have the same concentration of Na⁺ (aq) at 3.0 moles for molar concentration.

The highest molar concentration of Na⁺ (aq) can be determined by calculating the moles of Na⁺ ions in each solution.

1. Identify the number of sodium ions (Na⁺) in each compound:
  - NaCl: 1 Na⁺ ion
  - NaC₂H₃O₂: 1 Na⁺ ion
  - Na₂SO₄: 2 Na⁺ ions
  - Na₃PO₄: 3 Na⁺ ions

2. Calculate the moles of Na⁺ ions in each aqueous solution:
  - 3.0 M NaCl: 3.0 M * 1 Na⁺ ion = 3.0 moles of Na⁺ ions
  - 3.0 M NaC₂H₃O₂: 3.0 M * 1 Na⁺ ion = 3.0 moles of Na⁺ ions
  - 1.5 M Na₂SO₄: 1.5 M * 2 Na⁺ ions = 3.0 moles of Na⁺ ions
  - 1.0 M Na₃PO₄: 1.0 M * 3 Na⁺ ions = 3.0 moles of Na⁺ ions

3. Compare the moles of Na⁺ ions in each solution to determine the highest concentration.

All of these solutions have the same concentration of Na⁺ (aq) at 3.0 moles.

Learn more about molar concentration here:

https://brainly.com/question/21841645

#SPJ11

Though all the solutions have the same concentration of Na+ (aq), an aqueous solution of NaCl with 3.0 M has the highest molar concentration among the given solutions.

Explanation: To determine the molar concentration of Na+ (aq) in each solution, we need to consider the stoichiometry of the dissociation of each compound in water.

For sodium chloride (NaCl), it dissociates completely into Na+ and Cl- ions, so the molar concentration of Na+ (aq) is equal to the molar concentration of NaCl. Therefore, the molar concentration of Na+ (aq) in 3.0M NaCl is 3.0M.
For sodium acetate (NaC2H3O2), it dissociates into Na+ and C2H3O2- ions, but in a 1:1 ratio. So, the molar concentration of Na+ (aq) is half of the molar concentration of NaC2H3O2. Therefore, the molar concentration of Na+ (aq) in 3.0M NaC2H3O2 is 1.5M.
For sodium sulfate (Na2SO4), it dissociates into 2 Na+ ions and 1 SO4 2- ion. So, the molar concentration of Na+ (aq) is twice the molar concentration of Na2SO4. Therefore, the molar concentration of Na+ (aq) in 1.5M Na2SO4 is 3.0M.
For sodium phosphate (Na3PO4), it dissociates into 3 Na+ ions and 1 PO4 3- ion. So, the molar concentration of Na+ (aq) is three times the molar concentration of Na3PO4. Therefore, the molar concentration of Na+ (aq) in 1.0M Na3PO4 is 3.0M.

Therefore, the solution with the highest molar concentration of Na+ (aq) is 3.0M NaCl (sodium chloride).

To know more about the molar concentration of solutions:

brainly.com/question/8732513

#SPJ11

The mass percentage of sodium nitrate in a solution consisting of 73 g of sodium nitrate and 135 g of water is 35.1% and therefore we can say option (a) is correct.

The mass percentage is a concentration term used to describe concentration in solution. It is defined as the percentage of the mass of the solute per mass of the solution.

It can be written as the mass of solute/ mass of solution * 100

According to the question,

mass of the solute = 73 g

mass of the solvent = 135 g

mass of the solution = mass of solute + mass of solvent

= 73 + 105

= 208 g

mass percentage = [tex]\frac{73}{208} *100[/tex]

= 0.351 * 100

= 35.1 %

Learn more about Mass percentage:

https://brainly.com/question/15182450

#SPJ4

The correct answer is c. 73.6%. The mass percentage of sodium nitrate in the solution is 73.6%.

To find the mass percentage of sodium nitrate in the solution, we need to first calculate the total mass of the solution.

Total mass of solution = mass of sodium nitrate + mass of water
Total mass of solution = 73 g + 135 g
Total mass of solution = 208 g

Next, we need to calculate the mass of sodium nitrate as a percentage of the total mass of the solution.

Mass percentage of sodium nitrate = (mass of sodium nitrate / total mass of solution) x 100%
Mass percentage of sodium nitrate = (73 g / 208 g) x 100%
Mass percentage of sodium nitrate = 35.1%

Therefore, the mass percentage of sodium nitrate in the solution is 73.6%.

Learn more about sodium nitrate here: brainly.com/question/13645492

#SPJ11

The initial rate of decomposition of X is 0.0013 M/h.

The first-order rate law is given as:

Rate = k [X]

Where, k = rate constant

[X] = concentration of X

Since the partial pressure of X is given in the problem, we need to convert it to concentration using the ideal gas law:

PV = nRT

where:

P = partial pressure of X = 0.473 atm

V = volume of the flask = 20.0 L

n = number of moles of X

R = ideal gas constant = 0.08206 L atm K^-1 mol^-1

T = temperature of the flask (assumed constant) = 298 K

Solving for n,

n = PV/RT = (0.473 atm)(20.0 L)/(0.08206 L atm K^-1 mol^-1)(298 K) = 0.952 mol X

At t = 0, the concentration of X is [X]_0 = n/V = 0.952 mol/20.0 L = 0.0476 M.

Using the given data, we can calculate the rate constant (k) as follows:

ln([X]_0/[X]) = kt

where:

t = time = 5.6 hours

Substituting the given values,

ln(0.0476/0.0376) = k(5.6 hours)

Solving for k, we get:

k = (ln(0.0476/0.0376))/5.6 hours = 0.0263 h^-1

The initial rate of decomposition of X is given by:

Rate = k[X]_0 = (0.0263 h^-1)(0.0476 M) = 0.00125 M/h

Rounding off to 2 significant digits,

Initial rate of decomposition of X = 0.0013 M/h.

To know more about decomposition, here

brainly.com/question/14057429

#SPJ4

The classification of the given reaction is "Redox" which is the correct answer based on the chemical equation of the reaction given in the question.

The classification for the given reaction is a double displacement reaction.
The given reaction is:

2I¯(aq) + Cl2(aq) → I2(aq) + 2Cl¯(aq)

This reaction involves the exchange of ions between the reactants, and it can be classified as a "Redox" reaction (which stands for reduction-oxidation). In this reaction, the iodide ions (I¯) are oxidized, as they lose electrons to form I2, while the chlorine (Cl2) is reduced, as it gains electrons to form chloride ions (Cl¯).
To summarize, the classification of the given reaction is "Redox."

Learn more about reaction here:

https://brainly.com/question/31393083

#SPJ11

The classification for the reaction 2I¯(aq) + [tex]Cl_{2}[/tex](aq) → [tex]I_{2}[/tex](aq) + 2Cl¯(aq) is a redox reaction.

Redox reactions involve the transfer of electrons from one species to another, resulting in changes in oxidation states (the charge or electron density on an atom).  The reaction can be classified as a redox (reduction-oxidation) reaction. In this reaction, iodine (I¯) is being oxidized, and chlorine ( [tex]Cl_{2}[/tex]) is being reduced. To identify such reactions, we can

1. Identify the initial oxidation states: I¯ has an oxidation state of -1, and [tex]Cl_{2}[/tex] has an oxidation state of 0.
2. Identify the final oxidation states:  [tex]I_{2}[/tex] has an oxidation state of 0, and Cl¯ has an oxidation state of -1.
3. Observe the change in oxidation states: I¯ is oxidized from -1 to 0, while [tex]Cl_{2}[/tex] is reduced from 0 to -1.

To know more about Redox Reactions:

https://brainly.com/question/13293425

#SPJ11

Answer:The pH of a buffer prepared by adding 1.00 L of 1.0 M HCl to 750 ml of 1.5 M NaHCOO is 2.84

What is pH?

pH is a measure of the acidity of a solution.

pH is calculated from the negative logarithm to base ten of the hydrogen ions concentration of the solution.

For weak acids such as those used in the preparation of buffers, the acid dissociation constant, Ka are used to determine the pH of the solution.

Therefore, from the Ka of acetic acid, the pH of a buffer prepared by adding 1.00 L of 1.0 M HCl to 750 ml of 1.5 M NaHCOO is 2.84

The grams of N2 are required to completely react with 3.03 grams of H2 for the following balanced chemical equation is 14 g.

We may calculate the number of moles of H2 that will be used by dividing the amount of H2 that will be utilised by its molar mass. We may multiply that number by the molar mass of N2 to get how many grammes we should use. We can divide that mole quantity by 3 to determine how many moles of N2 the reaction will consume.

In the reaction 1 mole of N2 react with  3 mole of H2 and give 2 mole of NH3

mass of H2 = 3.03g

No of moles of H2 = 3.03g/2 gmol-1

         = 1.51 mole

1.51 mole of H2 require N2 = (1/3)× 1.51 moles  

        = 0.50 mole N2

molar mass of N2  =28g/mol

Mass of N2 require   = 0.50mole ×28g/mol

    = 14g

Mass of N2 require = 14g.

Learn more about Number of grams:

https://brainly.com/question/28902645

#SPJ4

The answer is C. 14.0 grams of N2 are required to completely react with 3.03 grams of H2.

The balanced chemical equation is:

N2 + 3H2 -> 2NH3

From the equation, we can see that 1 mole of N2 reacts with 3 moles of H2 to produce 2 moles of NH3.

To find out how many grams of N2 are required to react with 3.03 grams of H2, we first need to convert 3.03 grams of H2 to moles:

moles of H2 = mass of H2 / molar mass of H2
moles of H2 = 3.03 / 2.016
moles of H2 = 1.505

Now, we can use the mole ratio from the balanced equation to find out how many moles of N2 are required to react with 1.505 moles of H2:

moles of N2 = (1.505 mol H2) / (3 mol H2/1 mol N2)
moles of N2 = 0.5017

Finally, we can convert moles of N2 to grams of N2:

mass of N2 = moles of N2 x molar mass of N2
mass of N2 = 0.5017 x 28.02
mass of N2 = 14.04

To learn more about balanced chemical equation click here

brainly.com/question/28294176

#SPJ11

Explain to the kids that since there is essentially no —which is required for fire—if the bag contains only pure carbon dioxide, the splint would burn out right away.

H2 - Hydrogen Pure hydrogen gas will burst into flames when a burning splint is added to it, making a popping sound. Oxygen (O2) A smouldering splint will rekindle when exposed to a sample of pure oxygen gas.

The flame goes out as a result of carbon dioxide replacing the oxygen it requires to burn (the effect). A popping sound is produced when a flame is near hydrogen because of how the gas burns.

learn more about flaming splint

https://brainly.com/question/30124568

#SPJ1

One of the most popular names for this grape variety is "Mission grape".

Yes, a grape variety introduced in Chile by European Catholic missionaries is known by a variety of names. One of the most popular names for this grape variety is "Mission grape", which is believed to have originated from the Catholic missionaries who brought the grape to Chile. However, the grape variety is also known by other names such as Pais, Criolla Chica, Listan Prieto, and many others depending on the region and the local dialects. Despite the different names, this grape variety remains an important part of Chile's viticulture history and is still widely cultivated in the country today.

A grape variety introduced in Chile by European Catholic missionaries is known as the "País" grape, also referred to as "Mission" grape or "Criolla Chica." This grape variety was brought to Chile by Catholic missionaries in the 16th century to produce wine for religious ceremonies.

Learn more about grape here:

https://brainly.com/question/11741136

#SPJ11

The grape variety introduced in Chile by European Catholic missionaries is known by a variety of names, but it is most commonly referred to as the "Mission grape."

European Catholic refers to the Catholic Church in Europe, which has a long and complex history. The Catholic Church was the dominant religious institution in Europe during the medieval period, with its influence extending into political and cultural spheres. Throughout the centuries, the Church played a significant role in shaping the continent's religious, social, and political landscape.

The Church's teachings, doctrines, and traditions were transmitted through the continent's various societies and cultures, and many of Europe's greatest art, music, and architecture have been inspired by the Catholic faith. The Catholic Church has also been involved in significant political events in European history, such as the Crusades, the Reformation, and the Counter-Reformation. Today, the Catholic Church remains a significant presence in Europe, with over 200 million Catholics living on the continent. It continues to be an essential institution in shaping European culture and values.

To learn more about Europeans Catholic visit here:

brainly.com/question/7992361

#SPJ4

The balanced chemical equation for the reaction between aluminum and silver nitrate is:

2 Al + 3 AgNO3 → 3 Ag + 2 Al(NO3)3

From the equation, we can see that 3 moles of aluminum nitrate (Al(NO3)3) are produced for every 3 moles of silver nitrate (AgNO3) consumed.

Therefore, if 0.75 moles of silver nitrate react, we can calculate the number of moles of aluminum nitrate produced as follows:

0.75 mol AgNO3 x (2 mol Al(NO3)3 / 3 mol AgNO3) = 0.50 mol Al(NO3)3

So, 0.50 moles of aluminum nitrate (Al(NO3)3) are obtained from the reaction of 0.75 mol of silver nitrate with a sufficient amount of aluminum.

Learn more about balanced chemical equation here:

https://brainly.com/question/28294176

#SPJ11

Expected grams of aluminum oxide product from the given masses of reactants are 18.93 g.

Aluminum is chemical element with symbol Al and atomic number is 13.

4Al + 3O₂ → 2Al₂O₃

10 g Al × 1 mol Al / 26.98 g Al = 0.371 mol Al

4 g O₂ × 1 mol O₂ / 32.00 g O₂ = 0.125 mol O₂

We determine the limiting reactant by comparing the mole ratios of aluminum and oxygen in the balanced equation and reactant that produces  smaller amount of product is limiting reactant. In this case, aluminum is the limiting reactant because it produces only 0.1855 moles of aluminum oxide, which is less than the 0.25 moles of aluminum oxide produced by the oxygen:

0.371 mol Al × 2 mol Al₂O₃ / 4 mol Al = 0.1855 mol Al₂O₃

0.125 mol O₂ × 2 mol Al₂O₃ / 3 mol O2 = 0.2083 mol Al₂O₃

0.1855 mol Al₂O₃ × 101.96 g/mol = 18.93 g Al₂O₃

Therefore, expected grams of aluminum oxide product from the given masses of reactants are 18.93 g.

To know more about aluminum, refer

https://brainly.com/question/27859211

#SPJ1

Therefore, the net ionic equation for the reaction is Copper(2+) (aq) + 2 chlorine- (aq) → Copper(II) chloride (aq).

Ammonium sulphate and Copper hydroxide precipitate are the first products of the reaction between copper sulphate and ammonium hydroxide.

Mixing copper(II) sulphate and ammonium chloride results in the following observations:

Conventional: When copper ions (Copper2+) from Copper(II) sulfate are present, a blue solution develops. The colour of Ammonium Chloride doesn't seem to have changed at all.

Ionic total: While Ammonium Chloride dissociates into Ammonium and Chlorine- ions in solution, Copper(II) sulfate dissociates into Copper2+ and Sulfate 2- ions.

Copper(II) sulfate (aq) + 2 Ammonium Chloride (aq) → Copper(II) Chloride (aq) + 2 Ammonium (aq) + Sulfate 2- (aq)

Net Ionic: The net ionic equation shows only the species involved in the reaction. In this case, the Copper2+ and the Cl- ions combine to form Copper(II) chloride.

Copper2+ (aq) + 2 Chlorine- (aq) → Copper(II) chloride (aq)

To know more about ionic equation visit:-

https://brainly.com/question/29299745

#SPJ1

To find the percent ionization of the acid, we need to first calculate the initial concentration of the acid (HA) before it dissociates.

Since the solution is originally 0.532 M in acid (HA), we can assume that the initial concentration of HA is also 0.532 M.

Next, we need to calculate the concentration of the conjugate base (A-) at equilibrium. We can use the equation for the dissociation of an acid:
HA + H2O ⇌ H3O+ + A-

We know that the hydronium concentration at equilibrium is 0.112 M, so the concentration of the conjugate base is also 0.112 M.

To calculate the percent ionization of the acid, we use the equation:
% ionization = (concentration of dissociated acid / initial concentration of acid) x 100

We can find the concentration of dissociated acid (H3O+) by subtracting the concentration of the conjugate base (A-) from the hydronium concentration:

[H3O+] = 0.112 M - 0 M = 0.112 M

Plugging in the values, we get:
% ionization = (0.112 M / 0.532 M) x 100 = 21.05%

Therefore, the percent ionization of the acid is 21.05%.

To know more about percent ionization :

https://brainly.com/question/1619653

#SPJ11

The percent of ionization of an acid in solution of 0.532 M in acid HA i and have a hydronium concentration of 0.112 M is equals to the 21.1%.

The ionization of acids results hydrogen ions, thus, that's why compounds act as proton donors.

Molarity of solution = 0.532 M

At Equilibrium, hydronium concentration = 0.112 M

As we know, concentration is defined as the number of moles of substance in a litre of solution, that most of time concentration is replaced by molarity. So, concentration of acid solution, [ H A] = 0.532 M

Chemical reaction, [tex]HA (aq) + H_2O -> H_3O^{ +}+A^{-}[/tex]

percent of ionization of the acid =

[tex] \frac{ [ H_3O^{+}] }{ [ HA]} × 100 [/tex]

= (0.112/0.532) × 100

= 21.1%

Hence, required value is 21.1%.

For more information about percent of ionization, visit :

https://brainly.com/question/14225136

#SPJ4

The correct option is

In an endothermic response(reaction), the whole vitality(total energy) at the beginning of the response is more noteworthy than the full vitality at the conclusion of the response 

because endothermic responses retain warmth from the environment, which implies that the vitality of the framework increments.

An endothermic response may be a chemical response that retains warmth from the environment, which implies that the vitality of the framework increments.

This increment in vitality is utilized to break the bonds between the particles or atoms within the reactants, and the items are shaped from the modification of these iotas or atoms into unused bonds.

As a result, the whole vitality of the framework at the conclusion of the response is more noteworthy than the full vitality at the start of the response. This increment in vitality is ordinarily watched as an increment within the temperature of the framework or its environment. 

In an endothermic response, the whole vitality at the beginning of the response is less than the overall vitality at the end of the response

.

Usually, endothermic responses retain warmth from the environment, which implies that the vitality of the framework increments.

As a result, the entire vitality of the framework at the conclusion of the response is greater than the full energy at the start of the response. Subsequently,

The proper reply is "In an endothermic response(reaction), the whole vitality(total energy) at the beginning of the response is more noteworthy than the full vitality at the conclusion of the response ".

To know more about endothermic reactions refer to this :

https://brainly.com/question/1160007

#SPJ4

Each mole of the Al(NO₃)₃ contains number of the moles of oxygen atoms 1.3 mol of the oxygen atoms.

The one mole of the Al(NO₃)₃  is as :

In the one mole of the Al(NO₃)₃ contain the 1 atom of the Aluminum,

The 3 atoms of the Nitrogen,

The 9 atoms of the oxygen

The 1 mole of the atoms = 6.022 × 10²³ atoms

The number of the oxygen atoms = 9 atoms of the oxygen

The number of the moles of the oxygen in the 1 mole of the Al(NO₃)₃ :

The 9 atoms of the oxygen = 1.3 mol

Thus, in the 1 mole of the Aluminum nitrate, there will be the 1.3 mol of the oxygen atom.

To learn more about moles here

https://brainly.com/question/22368487

#SPJ4

The energy radiated by the black hole would be approximately 3.4 x 1031 Joules per second.This means the black hole radiates 3.4 x 10^31 watts of energy.

The energy radiated by a non-spinning black hole that accretes 10-7 Msun per year can be computed using the formula L=ηMc2, where M is the accretion rate. Putting in the numbers, we find L=0.06(10-7 x 6.3 kg/s)(3 x 108 m/s)2 = 3.4 x 1031. Therefore, the energy radiated by the black hole would be approximately 3.4 x 1031 Joules per second.

To calculate the energy radiated by a non-spinning black hole that accretes 10^-7 Msun per year, you can use the formula L=ηMc^2, where L is the luminosity, η is the efficiency, M is the accretion rate, and c is the speed of light. Plugging in the numbers, L=0.06(10^-7 x 6.3 kg/s)(3 x 10^8 m/s)^2 = 3.4 x 10^31. This means the black hole radiates 3.4 x 10^31 watts of energy.

Visit here to learn more about energy  : https://brainly.com/question/1932868
#SPJ11

Answer:

using

V1/T1=V2/T2

make V2 subject of formula

V2= V1T2/T1

V2= 1.9L

most bacteria have flagellum, also nerve cells are larger

Coinage metals, which typically include copper, silver, and gold, are chosen over more active metals for use in coins because they are less reactive and more resistant to corrosion.

This ensures durability and preserves the appearance of the coins. Some more active metals like zinc or nickel are sometimes used in coins due to their lower cost and availability, while still maintaining adequate resistance to corrosion and wear for everyday use.

The reason why the last 4 miles in the activity series of metals, which are gold, silver, platinum, and palladium, are commonly referred to as the "coinage medals" is because they are highly resistant to corrosion and have a low reactivity towards other chemicals, making them ideal for use in coins. These metals are also very rare and valuable, which adds to their appeal as a currency.

More active metals such as zinc or nickel are sometimes used in coins because they are more abundant and less expensive than the "coinage metals". However, these metals tend to be more reactive and therefore more prone to corrosion and other chemical reactions, which can affect the appearance and value of the coins over time. Additionally, the use of these metals in coins is often limited to lower denominations or commemorative coins, rather than as a standard currency.

Visit here to learn more about  Coinage metals : https://brainly.com/question/6923524
#SPJ11

The "coinage metals" are typically gold, silver, copper, and platinum, which are the last 4 metals in the activity series. These metals are chosen over more active metals for use in coins because they are relatively unreactive and do not corrode easily, making them ideal for coins that need to be durable and long-lasting. Additionally, these metals have been historically valued and used as currency, making them culturally significant as well.

However, some more active metals such as zinc or nickel are sometimes used in coins because they are cheaper and more readily available than the coinage metals. These metals may be used as an alloy with the coinage metals to make coins more affordable, or they may be used as a substitute for the more expensive metals in lower denomination coins. However, these metals are not as durable as the coinage metals and may corrode more easily, leading to shorter lifespans for the coins.

To know more about "coinage metals":

https://brainly.com/question/6955271

#SPJ11

The volume of the gas at 175.0 °C will be 24.50 Litres

Charles's law states that "the volume occupied by a definite quantity of gas is directly proportional to its absolute temperature.

It is expressed as;

V₁/T₁ = V₂/T₂

Where V1 and T1 are the initial volume and temperature, and V2 and T2 are the final volume and temperature.

To use this formula, we need to convert the temperatures to Kelvin by adding 273.15 to them:

T1 = 20°C + 273.15 = 293.15 K

T2 = 175.0°C + 273.15 = 448.15 K

Substituting the values into the formula, we get:

16.00 L / 293.15 K = V2 / 448.15 K

Solving for V2, we get:

V2 = 24.50 L

Therefore, the final volume is 24.50 L.

Learn more about Charles's law here: https://brainly.com/question/23122443

#SPJ1

When the impetus driving an object decreases, its motion also decreases. And when the impetus is completely removed, the object stops moving.

When the impetus driving an object decreases, its motion also decreases. The term "impetus" in this context refers to the force that sets an object in motion or maintains its motion. When this force decreases, the object experiences a decrease in its velocity or acceleration. This is due to the fact that the force acting on the object is directly proportional to the rate of change of its motion, as described by Newton's second law of motion.

If the impetus is completely removed, the object stops moving altogether. This is because there is no longer any force acting on the object to maintain its motion, and hence it decelerates and eventually comes to rest. This can be seen in everyday scenarios, such as a ball rolling to a stop when it reaches the bottom of a hill or a car slowing down and stopping when the engine is turned off.

To know more about impetus, here

brainly.com/question/11112379

#SPJ4

--The complete question is, What happens to the motion of an object when the impetus driving it decreases, and what happens when the impetus is completely removed?--

The answer is 1.3 x 10^-5 for the Ka of propanoic acid.

To solve this problem, we can use the relationship between the pH, the concentration of the acid, and the acid dissociation constant (Ka).

First, we need to find the concentration of propanoic acid in the solution. We know that 0.100 moles of propanoic acid are dissolved in 1.00 L of solution, so the concentration is:

concentration = 0.100 mol / 1.00 L = 0.100 M

Next, we can use the Ka value to set up an expression for the acid dissociation reaction:

HC3H5O2 + H2O ⇌ C3H5O2- + H3O+

The Ka expression for this reaction is:

Ka = [C3H5O2-][H3O+] / [HC3H5O2]

We can assume that the concentration of C3H5O2- is equal to the concentration of H3O+, since they are produced in a 1:1 ratio. Let's call this concentration x. Then the concentration of HC3H5O2 will be (0.100 - x), since some of the acid has dissociated.

Substituting these values into the Ka expression and solving for x gives:

Ka = x^2 / (0.100 - x) = 1.3 x 10^-5
x = 1.47 x 10^-3 M

Now we can use the definition of pH to find the pH of the solution:

pH = -log[H3O+] = -log(x) = -log(1.47 x 10^-3) = 2.832

To learn more about propanoic acid click here

brainly.com/question/31454666

#SPJ11

a small amount of Tollens' reagent (ammoniacal silver nitrate) is added to the sugar solution and the mixture is heated. If a reducing sugar is present, it will reduce the silver ions in the Tollens' reagent to metallic silver, which will form a silver mirror on the inside of the test tube.

Based on the structures of D-gulose and D-psicose, it can be predicted that both sugars will give a positive result in the Tollens' test because they both have an aldehyde group that can act as a reducing agent. However, the intensity of the reaction may differ for each sugar.

D-gulose has an aldehyde group at carbon 1, which is in the linear form of the sugar, while D-psicose has an aldehyde group at carbon 2. Since D-gulose can easily convert to its linear form, it is expected to give a stronger positive result in the Tollens' test compared to D-psicose, which may show a weaker positive result due to the steric hindrance of the bulky ketone group at carbon 3.

In summary, the Tollens' test can be used to distinguish between solutions of D-gulose and D-psicose by observing the intensity of the silver mirror formed. D-gulose is expected to give a stronger positive result due to its ability to convert to the linear form, while D-psicose may show a weaker positive result due to steric hindrance.

Learn more about aldehyde  here:

https://brainly.com/question/30478354

#SPJ11

Assuming that the capacitors are distinct and not identical, there are eight possible combinations of capacitance that can be produced using all three capacitors in a circuit.

This is because each capacitor can either be included or excluded from the circuit, resulting in two possibilities for each capacitor. With three capacitors, there are 2x2x2 = 8 possible combinations.

For example, if C1 = 1μF, C2 = 2μF, and C3 = 3μF, the eight possible combinations would be 1μF, 2μF, 3μF, 1+2=3μF, 1+3=4μF, 2+3=5μF, 1+2+3=6μF, and no capacitor connected.

To know more about capacitance, visit:

https://brainly.com/question/28445252

#SPJ1

The reading on a barometer would change if you were to take one on a trip from Los Angeles to Lake Tahoe, which is at a much higher altitude.

1. A barometer measures atmospheric pressure.
2. Atmospheric pressure decreases with an increase in altitude.
3. Los Angeles is at a lower altitude (approximately 305 feet or 93 meters above sea level) compared to Lake Tahoe (about 6,225 feet or 1,897 meters above sea level).
4. As you travel from Los Angeles to Lake Tahoe, the altitude increases.
5. Due to the increase in altitude, the atmospheric pressure decreases.
6. The barometer reading in Lake Tahoe will be lower than the reading in Los Angeles.

In conclusion, the barometer reading would be lower in Lake Tahoe compared to Los Angeles due to the higher altitude and the resulting decrease in atmospheric pressure.

To know more about readings on a barometer :

https://brainly.com/question/2275528

#SPJ11

If you were to take a barometer on a trip from Los Angeles to Lake Tahoe, which is at a much higher altitude, the reading on the barometer would decrease as you ascend to higher altitudes.

A barometer is a device used to measure atmospheric pressure. The pressure at sea level is approximately 1013 hPa (hectopascals) or 29.92 inches of mercury (inHg). As you increase in altitude, the pressure decreases due to the decreased weight of the atmosphere above. For every 1000 feet increase in altitude, there is an approximate decrease of 1 inch of mercury (inHg) or 33 hPa in pressure.

Lake Tahoe has an elevation of approximately 6,225 feet, which is significantly higher than Los Angeles, which is only 233 feet above sea level. As a result, the atmospheric pressure at Lake Tahoe would be lower than the pressure in Los Angeles. Therefore, if you were to take a barometer from Los Angeles to Lake Tahoe, the reading on the barometer would decrease as you ascend to higher altitudes.

In summary, the reading on a barometer would decrease as you ascend to higher altitudes such as Lake Tahoe from Los Angeles.

Learn more about barometer here:

https://brainly.com/question/2856885

#SPJ11

One should be careful with diethyl ether and tert-butanol when using a hot plate as they have low flash points and can easily ignite.

It is important to take proper precautions such as using a well-ventilated area and avoiding any sources of ignition. Sulfuric acid and glacial acetic acid are also potentially dangerous as they are corrosive and can cause severe burns if they come into contact with skin. Propanol and butanol have higher flash points and are generally safer to use on a hot plate.

When using a hot plate in an experiment, one should be particularly careful with diethyl ether and tert-butanol. Diethyl ether is highly flammable and volatile, while tert-butanol (2-methyl-2-propanol) can generate flammable vapors when heated. These compounds pose a risk of fire or explosion if not handled properly.

To know more about acid click here

brainly.com/question/30686324

#SPJ11

Fill the volumetric flask approximately two thirds full and mix. Carefully fill the flask to the mark etched on the neck of the flask. Use a wash bottle or medication dropper if necessary. Mix the solution wholly by using stoppering the flask securely and inverting it ten to twelve times.

A volumetric flask is used when it is imperative to be aware of each precisely and accurately the quantity of the solution that is being prepared. Like volumetric pipets, volumetric flasks come in distinctive sizes, depending on the extent of the answer being prepared.

Firmly stopper the flask and invert multiple times (> 10) to make certain the solution is nicely mixed and homogeneous. When working with a solute that releases warmth or gas all through dissolution, you ought to additionally pause and pull out the stopper once or twice. Use flasks for preparing options only.

Learn more about volumetric flask here: