The avalanche caused by the collapse of Mount St. Helen's bulge also led to a tremendous blast of magma and groundwater when the immense pressure within the volcano was suddenly released.
This pressure had been building for weeks prior to the eruption, as magma had been rising to the surface and creating a large bulge on the side of the mountain. When the bulge finally collapsed, it triggered a massive avalanche of rock, ice, and debris that traveled at speeds up to 150 miles per hour and devastated everything in its path. As the avalanche roared down the mountain, it also triggered a massive explosion of magma and steam that shot high into the sky. This explosion was caused by the sudden release of pressure within the volcano, which allowed the magma and groundwater to mix and create a highly pressurized gas that erupted violently. The resulting blast was heard for hundreds of miles and created a massive ash cloud that spread across the region, causing widespread damage and disruption. In conclusion, the collapse of Mount St. Helen's bulge caused not only an avalanche but also a tremendous blast of magma and groundwater due to the release of pressure within the volcano. The resulting eruption was one of the most significant volcanic events in modern history and had a lasting impact on the landscape and environment of the surrounding area.
Learn more about Mount St. Helen here
https://brainly.com/question/13620918
#SPJ11
Objects in our solar system, including planets and their moons, stay in orbit because
of gravity and inertia. Draw a model to show how each factor contributes to the
orbits of a planet and a moon orbiting that planet. Include the following in your
model:
I
• Labeled arrows to represent gravity and inertia
. The paths the planet and the moon take during their orbits
A brief summary of your model
This model displays the planet and its satellite as rotating around the sun, with arrows labeled "gravity" demonstrating the power of gravitational attraction exerted by the latter on the previous pair.
So what is being represented?In general sense, the arrows marked “inertia” depict the momentum that keeps the planet and moon in orbit - or moving near the star - after they have been propelled once. Moreover, the path of planet is depicted as a bigger, circular-shaped orbit, while the moon's trajectory appears as a smaller, elliptical shape.
The bottom line is that gravity pulls upon the planet and its natural satellite to protract them around the illumination source; inertia then maintains their motion along the shown paths. As a result, the force of gravity is relatively substantial on the planet; due to this solid attraction, the orbit of the first one is bigger and rounder. On the other hand, the moon's circuit is smaller and longer due to its weaker gravitational effect.
Learn more about model on
https://brainly.com/question/21247651
#SPJ1
How many miles from Hong Kong to Shanghai?
The distance from Hong Kong to Shanghai is approximately 1,223 miles (1,969 kilometers).
The distance between Hong Kong and Shanghai can vary depending on the mode of transportation. By air, the distance between the two cities is approximately 777 miles (1,250 kilometers). This flight typically takes around 2-3 hours, depending on the airline and any potential layovers.
By land, the distance between Hong Kong and Shanghai is significantly longer due to the fact that they are located on opposite sides of mainland China. Driving from Hong Kong to Shanghai would require traveling over 1,200 miles (2,000 kilometers), which would take approximately 20-24 hours.
It's also worth noting that there are other modes of transportation that can be used to travel between Hong Kong and Shanghai, such as taking a train or a ferry. However, the distance and time required for these options would also vary.
Learn more about China here:
https://brainly.com/question/17663260
#SPJ11
which numbered feature(s) on this photograph are consistent with the presence of glaciers sometime in the past?
The numbered features on the photograph that are consistent with the presence of glaciers sometime in the past are features 2, 3, and 4.
Feature 2 shows a U-shaped valley, which is a common feature created by the erosion of glaciers. As the glaciers move through the valley, they scrape and carve the sides and bottom, creating a distinctive shape.
Feature 3 shows a moraine, which is a pile of rocks and sediment left behind by a glacier as it retreats.
Moraines are typically found at the end of glaciers, and their presence indicates that a glacier once extended to that location.
Feature 4 shows a cirque, which is a bowl-shaped depression in the mountainside that was created by glacial erosion.
These features are consistent with the presence of glaciers sometime in the past and provide evidence of the Earth's dynamic and ever-changing landscape.
To know more about glaciers refer here:
https://brainly.com/question/12109#
#SPJ11
How does a pyroclastic surge differ from a pyroclastic flow?
A pyroclastic surge and a pyroclastic flow are both types of volcanic hazards that can occur during explosive eruptions. However, there are distinct differences between the two phenomena.
A pyroclastic flow is a high-density mixture of hot ash, gas, and rock fragments that flows down the slopes of a volcano at high speeds, typically reaching velocities of several hundred kilometers per hour. These flows are highly destructive and can travel several kilometers from the volcano's summit, burying everything in their path. They are generally initiated by the collapse of an eruption column or the partial failure of a lava dome.
On the other hand, a pyroclastic surge is a lower-density, turbulent cloud of volcanic ash and gas that travels radially away from the volcano's summit at high speeds. Surges are typically less dense and slower-moving than pyroclastic flows, and they can travel much further from the volcano's summit, reaching tens of kilometers in some cases. Pyroclastic surges are often caused by the collapse of eruption columns or the explosive release of gas from the magma chamber, which can initiate an outward-moving blast of hot ash and gas.
In summary, the primary difference between a pyroclastic surge and a pyroclastic flow is the density and speed of the material involved. Pyroclastic flows are denser and faster-moving, while pyroclastic surges are less dense and more turbulent, but can travel much further from the volcano's summit. Both phenomena can be extremely hazardous and pose a significant risk to people and infrastructure in the vicinity of an erupting volcano.
Know more about pyroclastic surge here:
https://brainly.com/question/29523773
#SPJ11
The type of tectonic plate boundary at the Mid-Atlantic Ridge is referred to as a ________.
A) convergent boundary
B) divergent boundary
C) transform fault
D) subduction zone
E) seismic boundary
The answer is B) divergent boundary. The Mid-Atlantic Ridge is located in the middle of the Atlantic Ocean and is a long chain of mountains formed by the separation of tectonic plates.
This boundary is a divergent boundary, which means that the plates are moving away from each other. This movement causes magma to rise up from the mantle and solidify, creating new crust. In the body of the answer, it can be explained that this process is called seafloor spreading.
The plates move apart at a rate of a few centimeters per year, which may not seem like much, but over millions of years, it can create significant changes in the Earth's surface. In conclusion, the type of tectonic plate boundary at the Mid-Atlantic Ridge is a divergent boundary.
To know more about tectonic plates visit:
https://brainly.com/question/19317822
#SPJ11
Imagine that the Kelut Volcano experienced an eruption last year. Recent heavy rainfalls have mixed with pyroclasts to produce a series of devastating lahars. How would a geoscientist classify these lahars?
A geoscientist would classify the lahars produced by the mixing of heavy rainfalls and pyroclasts from the Kelut Volcano eruption as primary lahars.
Primary lahars are the result of the direct interaction of volcanic material and water, such as heavy rainfall or snowmelt, which can cause the mobilization of pyroclastic debris and ash to form volcanic mudflows. These lahars are typically fast-moving and destructive, and can cause significant damage to infrastructure and communities in their path.
In addition to primary lahars, geoscientists may also classify lahars based on their source material, such as debris-flow lahars or hyperconcentrated-flow lahars. Debris-flow lahars are composed of a mixture of volcanic material and rock fragments, while hyperconcentrated-flow lahars contain a high concentration of volcanic ash and water. Understanding the classification of lahars is important for predicting their behavior, potential impacts, and developing effective hazard mitigation strategies to protect communities at risk.
Know more about primary lahars here:
https://brainly.com/question/14643369
#SPJ11
Moving magma associated with volcanic activity generates earthquakes by___
Moving magma associated with volcanic activity generates earthquakes by exerting pressure on the surrounding rocks and crust.
As magma rises, it creates fractures and fissures in the rock, causing seismic waves to be released. These earthquakes can provide important clues about the behavior of magma beneath the Earth's surface and can be used to predict volcanic eruptions.
Moving magma associated with volcanic activity generates earthquakes by causing stress and displacements in the surrounding rock, leading to the release of seismic energy.
Visit here to learn more about magma brainly.com/question/16940653
#SPJ11
Extrusive igneous rock (on top of the ground) is called?
Extrusive igneous rock that forms on the Earth's surface is called volcanic rock. This type of rock is formed when magma, or molten rock, rises to the surface and cools quickly. The rapid cooling process prevents the formation of large crystals and results in a fine-grained texture.
Volcanic rocks can be found in many different forms, including lava flows, volcanic ash, and volcanic breccia. They are typically associated with areas of active volcanism, such as volcanic islands, volcanic arcs, and hotspots. Examples of extrusive igneous rocks include basalt, andesite, and rhyolite. Basalt is the most common volcanic rock and is found on the ocean floor and in areas of recent volcanic activity. Andesite is typically found in subduction zones where oceanic crust is being pushed beneath continental crust. Rhyolite is formed from highly viscous magma and is typically associated with explosive volcanic eruptions. Overall, volcanic rocks play an important role in the Earth's geology and are crucial in understanding the processes that shape our planet.
Learn more about volcanic rock here
https://brainly.com/question/11198777
#SPJ11
Carbon dioxide became trapped in Lake Nyos because the lake is ______.
Carbon dioxide became trapped in Lake Nyos because the lake is a deep crater lake formed by a volcanic eruption. The magma beneath the lake releases carbon dioxide which dissolves in the water creating a high concentration of dissolved carbon dioxide.
Normally, the carbon dioxide would slowly bubble to the surface and dissipate into the atmosphere. However, in Lake Nyos, the carbon dioxide became trapped under a layer of cold, dense water, preventing it from escaping. Over time, more and more carbon dioxide built up, eventually reaching a critical point where it suddenly erupted from the lake, causing a catastrophic event known as a limnic eruption. This released a massive cloud of carbon dioxide which suffocated over 1,700 people and thousands of livestock in nearby villages. To prevent a similar disaster from happening again, scientists have implemented measures to regularly release the gas from the lake to prevent an excessive buildup of content loaded carbon dioxide.
Learn more about Carbon dioxide here
https://brainly.com/question/25385913
#SPJ11
concordant plutons cut across existing structures while discordant plutons are parallel to existing features
a. true
b. false
The correct answer is b. false. The statement you provided is incorrect. Concordant plutons are intrusive igneous rock bodies that are parallel to the existing structures, such as sedimentary layers, within the surrounding country rock.
The statement is actually the opposite. Concordant plutons are parallel to existing features while discordant plutons cut across existing structures. Concordant plutons form in parallel with the existing rock layers while discordant plutons are intrusive and cut through the existing rock layers. These terms are commonly used in geology to describe the relationship between igneous intrusions and the pre-existing rock formations. It is important for geologists to understand the orientation of these plutons as it helps them in understanding the geological history of the area. Discordant plutons, on the other hand, cut across the existing structures, intruding at angles that are not parallel to the surrounding rock formations. In summary, concordant plutons align with existing features, while discordant plutons cut across them.
Learn more about igneous rock here
https://brainly.com/question/20538428
#SPJ11
What were the results of the Missile Crisis for the USSR and Khrushchev (4)?
The Missile Crisis had significant consequences for both the USSR and Khrushchev. On one hand, the USSR was able to avoid a direct military confrontation with the United States, which could have resulted in catastrophic consequences.
The USSR was forced to remove their missiles from Cuba, which was a significant blow to their prestige and influence in the region. Additionally, Khrushchev's handling of the crisis was heavily criticized by members of the Soviet government and military, which led to his eventual downfall from power in 1964. In summary, while the USSR avoided a direct military conflict, the crisis damaged their reputation and weakened Khrushchev's leadership. The Missile Crisis resulted in the USSR, led by Khrushchev, agreeing to withdraw its nuclear missiles from Cuba in exchange for the US removing its missiles from Turkey. This compromise helped to de-escalate tensions between the two superpowers and avoid a potential nuclear war. However, Khrushchev's leadership was weakened as he was seen as backing down to US pressure. Ultimately, this contributed to his removal from power in 1964, with the crisis marking a turning point in the Cold War, emphasizing the need for improved communication and diplomacy between the USSR and the US.
Learn more about Missile Crisis here
https://brainly.com/question/457425
#SPJ11
Banded iron formations are thought to have formed ________ , whereas Red Beds are thought to have formed ________ .
Banded iron formations are thought to have formed during the Archean Eon, between 3.8 and 2.5 billion years ago, whereas Red Beds are thought to have formed during the Paleozoic Era, between 540 and 250 million years ago.
Banded iron formations are sedimentary rocks that consist of alternating layers of iron oxides and silica, and are believed to have formed as a result of the precipitation of iron and silica from ancient oceans.
Red Beds, on the other hand, are sedimentary rocks that are typically reddish in color due to the presence of iron oxides, and are thought to have formed in a variety of environments, including terrestrial, lacustrine, and marine settings.
To know more about banded iron refer to-
https://brainly.com/question/28489816
#SPJ11
1. Define drought and desertification
Answer:
Drought -A long period with little or nor rain
Desertification- The process whereby once fertile areas become increasingly more arid
this biome has four seasons. the temperature varies widely from season to season with cold winters and hot, wet summers. during the winter the plants go dormant and many of the animals hibernate or migrate.
The biome you are describing is the temperate deciduous forest. This biome is characterized by its four distinct seasons, with temperature fluctuations ranging from cold winters to hot, wet summers.
During the winter months, the plants in this biome go dormant, while many of the animals hibernate or migrate to warmer areas. However, during the spring and summer months, the biome is full of lush vegetation and a diverse array of wildlife. The temperate deciduous forest is found in regions such as North America, Europe, and Asia.The temperatures can vary widely from season to season, with hot summers and cold winters. In the winter, many of the plants go dormant, shedding their leaves, and many animals hibernate or migrate to avoid the harsh conditions.
Some common tree species found in this biome include oak, maple, beech, and hickory, and animals that inhabit this biome include deer, raccoons, squirrels, and birds.this biome has four seasons. the temperature varies widely from season to season with cold winters and hot, wet summers. during the winter the plants go dormant and many of the animals hibernate or migrate.
Learn more about temperate here:https://brainly.com/question/438283
#SPJ11
What happened after the 1986 nuclear accident in the Soviet Union?
Answer: The accident caused the largest uncontrolled radioactive release into the environment ever recorded for any civilian operation, and large quantities of radioactive substances were released into the air for about 10 days. The Soviet government also cut down and buried about a square mile of pine forest near the plant to reduce radioactive contamination at and near the site. Chernobyl's three other reactors were subsequently restarted but all eventually shut down for good, with the last reactor closing in December 2000. It also contributed to the demise of a political system.
examine the following maps to answer the questions below: plate boundaries, distributions of earthquakes, distributions of volcanoes, age of the sea floor, ocean floor features: describe the pattern of earthquakes that you see on the earthquake/global seismicity map.
The earthquake/global seismicity map shows a clear pattern of earthquakes occurring primarily along plate boundaries, with a higher frequency of seismic activity at areas where plates are actively colliding or diverging.
This is consistent with the theory of plate tectonics, which explains that earthquakes are caused by the movement and interaction of tectonic plates.
On the map, we can see that there are dense clusters of earthquakes at the boundaries of the Pacific Plate, the North American Plate, the South American Plate, and the African Plate, as well as along the Mid-Atlantic Ridge and the Antarctic Plate. These areas are marked by intense seismic activity and are known for being highly prone to earthquakes and other tectonic hazards.
In contrast, there are relatively few earthquakes occurring in the interiors of the plates, which tend to be more stable and less prone to seismic activity. This pattern highlights the importance of plate boundaries in the generation of earthquakes, and the role of tectonic forces in shaping the Earth's crust.
Learn more about earthquake here:
https://brainly.com/question/29500066
#SPJ11
Large volcanoes that have a low, broad shape and are made of successive flows of low viscosity lava are called
a. stratovolcanoes.
b. shield volcanoes.
c. cinder cones.
d. ignimbrites.
e. composite volcanoes.
The correct answer is b. shield volcanoes. These types of volcanoes are typically found at hot spots or divergent plate boundaries, where magma is able to rise to the surface without much obstruction.
The lava that is released from shield volcanoes has a low viscosity, meaning it is thin and fluid, and is able to flow easily and cover large areas. Over time, the successive flows of lava build up a low, broad shape that is characteristic of shield volcanoes. In contrast, stratovolcanoes (e) are tall, steep-sided volcanoes that are built up by layers of both lava and ash. Cinder cones (c) are small, cone-shaped volcanoes that are made up of loose volcanic debris, while ignimbrites (d) are deposits of volcanic ash and other pyroclastic material that have been welded together by heat and pressure. Composite volcanoes (e) are another term for stratovolcanoes, as they are composed of layers of both lava and ash.
Learn more about lava here:
https://brainly.com/question/15393639
#SPJ11
Identify the effects of each conflict between populations and American Indian population
The effects of conflicts between different populations and the American Indian population. Here are some key terms and their effects on these conflicts:
1. Colonization: European settlers arrived in the Americas and established colonies, leading to land dispossession and displacement of American Indian populations.
2. Cultural assimilation: European settlers often attempted to assimilate American Indian populations into their culture, causing a loss of traditional values, languages, and practices among Native communities.
3. Forced relocation: American Indians were often forcibly removed from their ancestral lands to less desirable locations, leading to population decline, disrupted social structures, and loss of resources.
4. Disease: European settlers brought new diseases to the Americas that American Indian populations had no immunity against, causing devastating epidemics and significant population loss.
5. Treaties and reservations: Governments often made treaties with American Indian tribes to establish peace or land rights, but these treaties were frequently broken or unfairly negotiated, leading to the creation of reservations and further loss of sovereignty and resources for American Indian populations.
6. Warfare and violence: Conflicts between American Indians and other populations often resulted in violence, causing death, trauma, and further displacement of Native communities.
Visit here to learn more about American Indians : https://brainly.com/question/16404172
#SPJ11
Throughout American history, there have been numerous conflicts between different populations and the American Indian population.
One example of conflict between populations and the American Indian population is the Indian Removal Act of 1830. This act led to the forced relocation of tens of thousands of Native Americans from their ancestral lands to designated reservations in the West. The effects of this conflict were devastating for the Native American population, as they were forced to leave behind their homes and ancestral lands, resulting in a loss of cultural identity and heritage.
In more recent years, conflicts between populations and the American Indian population have centered around issues of land rights and natural resource management. For example, the construction of the Dakota Access Pipeline in 2016 sparked protests and clashes between the Standing Rock Sioux Tribe and law enforcement. The effects of this conflict have included heightened tensions between the government and Native American populations, as well as increased awareness of the importance of protecting tribal sovereignty and cultural heritage.
Overall, the effects of conflicts between populations and the American Indian population have been far-reaching and often devastating.
To learn more about American Indian population, click here:
https://brainly.com/question/5060283
#SPJ11
What kind of eruption was the 1783 Laki eruption, which produced the most lava by volume of any volcano in recorded history?
The 1783 Laki eruption was a fissure eruption, which means that it occurred along a long crack or fissure in the earth's surface rather than from a single volcanic vent.
This type of eruption can produce vast amounts of lava and gas, and in the case of Laki, it is estimated that around 14 cubic kilometers of lava was produced, making it the largest eruption by volume in recorded history. The Laki eruption occurred in Iceland and lasted for eight months, during which time it released huge amounts of sulfur dioxide and other gases into the atmosphere, causing a widespread environmental and human impact. The eruption resulted in crop failures, livestock deaths, and a severe winter in Europe, which led to a famine that may have caused tens of thousands of deaths. The Laki eruption is therefore considered one of the most devastating volcanic events in human history, highlighting the far-reaching impact that volcanic eruptions can have on our planet and its inhabitants.
Learn more about eruption here
https://brainly.com/question/25121802
#SPJ11
Select the correct answer.
Which sentence correctly describes a data set that follows a normal distribution with a standard deviation of 4 and a mean of 14?
OA. 68% of the data points lie between 10 and 14.
B.
68% of the data points lie between 8 and 12.
O C.
68% of the data points lie between 10 and 18.
O D. 68% of the data points lie between 10 and 16.
Answer:
C. 68% of the data points lie between 10 and 18.
Explanation:
The mean minus one standard deviation (14-4 = 10) is ten, and the mean plus one standard deviation (14 + 4 = 18) is 18. Everything withing the first standard deviation of a normal distribution is 68% of the population, two deviations is 95% of the population, and three deviations is 99% of the population. (According to the Empirical Rule)
a desert . multiple select question. occurs solely in subtropical environments receives less than 25 cm of precipitation per year is always covered with sand dunes has sparse vegetation often lacks permanent streams
The correct options are:Occurs solely in subtropical environmentsReceives less than 25 cm of precipitation per yearOften lacks permanent streams
Deserts can have a variety of landscapes and may or may not have sand dunes. The amount of vegetation can also vary, but it is generally sparse. The key defining factor of a desert is the lack of precipitation, which can lead to water scarcity and impact the availability of permanent streams. Deserts are typically found in subtropical regions, but they can also occur in other areas with low rainfall.A desert is a type of biome characterized by its dry climate, where the amount of precipitation is typically less than 25 centimeters per year. Deserts can occur in a variety of environments, not just subtropical regions, but also in cold regions, coastal regions, and even in the polar regions. Deserts can be covered with sand dunes, but not all deserts have extensive sand dunes. Some deserts are rocky, gravelly, or have hard-packed surfaces. Deserts have sparse vegetation, but there are some desert plants and animals that are specially adapted to survive in this harsh environment. Deserts often lack permanent streams, but may have intermittent streams or seasonal rivers.
Learn more about Deserts here:https://brainly.com/question/12556787
#SPJ11
Infer which of these solids is most likely to deform elastically under stress.
A. a rubber band
B. a paper clip
C. playdough
D. a ceramic plate
Among the given options, a rubber band is most likely to deform elastically under stress. Elastic deformation is the reversible deformation of a solid material when it is subjected to external forces.
In other words, when the applied stress is removed, the material returns to its original shape and size. Rubber bands are made up of long chains of polymers that are loosely coiled and tangled. When stretched, the polymer chains straighten out and align with the direction of the applied force. As soon as the force is removed, the polymer chains relax and return to their original tangled state, causing the rubber band to return to its original shape and size. On the other hand, the paper clip, playdough, and ceramic plate are not likely to deform elastically under stress.
Paper clips are made of metal, which has limited elasticity, and can only withstand small amounts of deformation before it becomes permanently bent or damaged. Playdough is a soft and pliable material, and when it is subjected to stress, it deforms plastically, which means that it undergoes permanent changes in shape and size. Similarly, ceramic plates are brittle materials that tend to crack or shatter when subjected to stress rather than undergo elastic deformation. In conclusion, a rubber band is most likely to deform elastically under stress among the given options due to the unique properties of its polymer chains.
Learn more about Elastic deformation here:
https://brainly.com/question/29996154
#SPJ11
Describe the extent to which slaves are utilized as labor in each of these areas
Slaves were utilized as labor to a large extent in many areas such as agriculture, mining, construction, and manufacturing. In the agricultural sector, slaves were commonly used to cultivate crops such as cotton, tobacco, and sugar cane.
In the mining industry, slaves were used to extract valuable minerals from the earth such as gold and silver. In the construction industry, slaves were used to build roads, bridges, and other infrastructure projects. In the manufacturing sector, slaves were used to produce goods such as textiles and furniture. Overall, slaves were utilized as labor in a variety of industries and played a significant role in the economic development of many countries during the time of slavery.
In agricultural areas, slaves were primarily used for labor-intensive tasks like planting, cultivating, and harvesting crops. The most common crops in these areas were cotton, sugar, and tobacco. Slaves were also used for livestock management and other farm chores.
In urban areas, slaves worked in various roles, including as domestic servants, skilled laborers (such as blacksmiths, carpenters, and masons), and factory workers. They often performed tasks requiring specialized skills, contributing significantly to the economic growth of these areas.
In both agricultural and urban areas, slaves were essential to the economy and heavily relied upon for their labor. Their exploitation enabled their owners to accumulate wealth and maintain a high standard of living.
Visit here to learn more about slaves : https://brainly.com/question/16747534
#SPJ11
Slaves were heavily utilized as labor in many areas throughout history. In ancient civilizations such as Greece and Rome, slaves were used for tasks ranging from domestic work to agriculture and mining.
Slaves from Africa were transported by slave dealers, primarily to the Americas, during the Atlantic slave trade, transatlantic slave trade, or Euro-American slave trade. From the 16th to the 19th century, the Middle Passage and the triangular trade route were frequently employed in the slave trade.
During the colonization of the Americas, slaves were brought over from Africa and forced to work on plantations, primarily in the production of cash crops like tobacco and cotton. Slavery was also widely utilized in the Caribbean for the production of sugar, which was a lucrative industry at the time. In all of these areas, slaves were seen as a cheap and abundant source of labor, and their mistreatment and exploitation were justified by the economic benefits they provided to their owners.
To learn more about Slave trade, click here:
https://brainly.com/question/8667023
#SPJ11
Which crop is exported by both Ecuador and Columbia from their tropical lowlands?
A.bananas
B.soybeans
C.cabbage
D.beets
Answer: A. Bananas
Explanation:
Volcanic hazards fall into one of two groups: ____ hazards, such as lahars and pyroclastic flows, and ______ hazards, such as famine.
Volcanic hazards are classified into two main groups: primary and secondary hazards. Primary hazards are those directly associated with the volcanic activity itself, such as lava flows, lahars, pyroclastic flows, and ash fall. These hazards pose an immediate threat to human life and property, and can cause widespread destruction and loss of life.
Secondary hazards, on the other hand, are those that result indirectly from volcanic activity. These hazards are often the result of the disruption of the natural environment and can have long-lasting impacts. Secondary hazards include things like famine, drought, and water pollution.
Famine, in particular, is a common secondary hazard associated with volcanic activity. Volcanic eruptions can cause crop failures, damage to livestock, and disruption of food distribution networks. This can lead to food shortages and famine in the affected areas, which can have devastating impacts on local communities.
Overall, it is important to understand the different types of volcanic hazards in order to be prepared for potential volcanic activity. By identifying the primary and secondary hazards associated with volcanoes, governments and communities can take steps to mitigate the risks and reduce the potential impact on human life and property.
Know more about Volcanic hazards here:
https://brainly.com/question/31653135
#SPJ11
What minerals crystallize first out of a melt, as magma cools?
This process is described by Bowen's Reaction Series, which categorizes minerals into two branches: the discontinuous and continuous series.
In the discontinuous series, minerals with high melting points crystallize first, starting with olivine, followed by pyroxene, amphibole, and finally biotite. These minerals are rich in iron and magnesium, which makes them dense and dark in color.Hi! When magma cools, the minerals that crystallize first are those with the highest melting points. In the continuous series, plagioclase feldspar crystallizes at a range of temperatures, evolving in composition from calcium-rich to sodium-rich as the magma cools. This results in a continuous series of mineral compositions.In summary, the minerals that crystallize first out of a melt as magma cools are olivine and calcium-rich plagioclase feldspar. These minerals have high melting points, and their formation is guided by Bowen's Reaction Series.
Learn more about minerals here
https://brainly.com/question/15844293
#SPJ11
How do metamorphic rocks reach Earth's surface?
A) through burial under overlying rocks
B) through uncovering by humans
C) through eruption from volcanoes
D) through removal of overlying rocks
Metamorphic rocks reach Earth's surface is D) through removal of overlying rocks
Metamorphic rocks reach Earth's surface through the removal of overlying rocks. This can occur due to erosion, tectonic movements, or other geological processes that expose the metamorphic rocks. While volcanoes (C) play a significant role in bringing some rocks to the surface, they are mainly associated with igneous rocks, not metamorphic rocks.
Metamorphic rocks are eventually exposed at the surface by uplift and erosion of the overlying rock. The most familiar way for magma to escape or extrude to Earth’s surface is through lava. Lava eruptions can be “fire fountains” of liquid rock or thick slow-moving rivers of molten material.
Learn more about Metamorphic rocks here: brainly.com/question/7223515
#SPJ11
Metamorphic rocks reach the Earth's surface primarily through the removal of overlying rocks. This can be facilitated by processes such as weathering, glaciation, and action by wind and water.
Explanation:Metamorphic rocks are formed deep within the Earth's crust under intense heat and pressure. Over time, geological processes bring these rocks to the Earth's surface. The key mechanism through which this happens is through the removal of overlying rocks, also known as erosion or exhumation.
This can occur through a variety of processes including weathering, glaciation, and action by wind and water. After the overlying layers have been eroded away, the metamorphic rocks are exposed at the surface. This process can take hundreds to millions of years.
Therefore, between the options given, Answer D) 'through removal of overlying rocks' provides the most accurate description of how metamorphic rocks reach the Earth's surface.
Learn more about Metamorphic Rocks here:https://brainly.com/question/33753657
#SPJ6
Concrete is formed by adding cement and water to a mixture of sand and gravel. This could be seen as an analog for the formation of a ___________ sedimentary rock.
a. clastic
b. chemical
c. biochemical
d. organic
The formation of concrete by adding cement or clastic and water to a mixture of sand and gravel is an example of clastic sedimentary rock formation.
Clastic rocks are formed from the accumulation of mineral fragments or rock particles that have been cemented together. In the case of concrete, the cement acts as the binding agent that holds the sand and gravel particles together. Similarly, clastic sedimentary rocks are formed from the accumulation of weathered rock fragments, minerals, or organic matter that are transported and deposited by wind, water, or ice. Over time, these fragments become compacted and cemented together to form solid rock.
Examples of clastic sedimentary rocks include sandstone, shale, and conglomerate. In contrast, chemical sedimentary rocks are formed from the precipitation of minerals from water, while biochemical sedimentary rocks are formed from the accumulation of organic matter, such as shells or plant debris. Organic sedimentary rocks, on the other hand, are formed from the accumulation of organic matter that has undergone chemical and physical changes, such as coal or oil shale.
Learn more about sedimentary here:
https://brainly.com/question/30889537
#SPJ11
The principle that regional elevations adjust to the types and thicknesses of rocks at depth is known as:
a) superposition
b) isostasy
c) elastic rebound
d) equanimity
The principle that regional elevations adjust to the types and thicknesses of rocks at depth is known as isostasy. Therefore, the correct option is (b) isostasy.
Isostasy refers to the state of gravitational equilibrium between the Earth's lithosphere and asthenosphere. According to this principle, the Earth's crust is like a floating iceberg that is buoyed up by the denser underlying mantle. The crustal thickness and density determine the depth of this balance, with thicker and denser crust resulting in deeper isostatic balance. This principle is essential in explaining the topography of the Earth's surface and the way it responds to geological processes such as mountain building and erosion.
learn more about erosion here:https://brainly.com/question/30587260
#SPJ11
In the Islamic Republic of Iran, which group examines all laws to ensure that they are acceptable under Islam? A. the Great Council B. the Supreme Court C. the Senate
In the Islamic Republic of Iran, the group that examines all laws to ensure that they are acceptable under Islam is the A. Great Council .
What is the Grand Council ?Following the 1979 Islamic Revolution in Iran, a body known as The Great Council was formed to oversee cultural and educational policies.
Comprising high-ranking government officials and religious scholars, it holds the power to assess all legislation and confirm its adherence to Islamic values and principles.
Find out more on the Grand Council at https://brainly.com/question/2477295
#SPJ1