the c component of vector a is 5.3 units, and it’s y component is -2.3 units. the angle that vector a makes with the +x axis is closest to
110
160
23
340
250

The slope of the road can be given as the ratio of the change in vertical

distance per unit change in horizontal distance.

Reasons:

Width of the truck = 2.4 meters

Height of the truck = 4.0 meters

Height of the center of gravity = 2.2 meters

Required:

The allowable steepness of the slope the truck can be parked without tipping over.

Solution:

Let, C represent the Center of Gravity, CG

At the tipping point, the angle of elevation of the slope = θ

Where;

[tex]tan\left(\theta \right) = \dfrac{\overline{AM}}{\overline{CM}}[/tex]

The steepness of the slope is therefore;

[tex]\mathrm{The \ steepness \ of \ the \ slope}= \dfrac{\overline{AM}}{\overline{CM}} \times 100[/tex]

Where;

[tex]\overline{AM}[/tex] = Half the width of the truck = [tex]\dfrac{2.4 \, m}{2}[/tex] = 1.2 m

[tex]\overline{CM}[/tex] = The elevation of the center of gravity above the ground = 2.2 m

[tex]\mathrm{The \ steepness \ of \ the \ slope}= \dfrac{1.2}{2.2} \times 100 \approx 54.55\%[/tex]

[tex]tan\left(\theta \right) = \mathbf{\dfrac{2.2}{1.2}} = \dfrac{11}{6}[/tex]

[tex]Elevation \ of \ the \ road \ \theta = arctan\left( \dfrac{6}{11} \right) \approx 28.6 ^{\circ}[/tex]

The maximum steepness of the slope where the truck can be parked is 54.55 %.

Learn more here:

https://brainly.com/question/20793607

Explanation:

Di -. 2

Tetra. -3

deca. -. 10

Hepta. -- 7

Answer:

4600kg

Explanation:

Density=mass÷volume

920=m/5

m=920×5=4600kg

Answer:

20 m/s at -35°

Explanation:

Ignoring air resistance, the initial vertical velocity will be reversed and the initial horizontal velocity will remain constant.

Answer:

D

Explanation:

Explanation:

Fgravity = G*(mass1*mass2)/D²

G is the gravitational constant, which has the same value throughout our universe.

D is the distance between both objects.

so, now some numbers change

Fgravitynew = G*((1/3)*mass1*2*mass2)/(2D)² =

= G*((2/3)*mass1*mass2)/(4D²) =

= (2/3)* (G*(mass1*mass2)/D²) / 4 =

= ((2/3)/4) * G*(mass1*mass2)/D² =

= (2/12) * Fgravity = Fgravity/6

the new gravitational force will be 16/6 = 8/3 units.

Answer:

Explanation:

Initial velocity 25 m/s

final velocity 0 m/s

The ratio of the two is undefined as dividing by zero is wonky.

Answer:

Speed is the time rate at which an object is moving along a path, while velocity is the rate and direction of an object's movement.

Explanation:

[tex] \: \: \: \: [/tex]

[tex] \: \: \: \: \: [/tex]

dissimilar with respect to one or more particular characters

Answer:

Explanation:

If 2×2 is 4 so 1 kg can be 1 gram if it belive on it self some people change

Answer:

D = 25g/cm³

Explanation:

1ml = 1cm³

D = m/V

D = 500g/20cm³

D = 25g/cm³

Answer:

Explanation:

I hope it's helpful for you

Answer: here you go i have to put 20 letters in so just ignore this and look at the link.

The force constant k of the spring, if The oscillation of the 2 kg mass of spring is described by x = 3.0 cos (4.0 t) is 32 N / m.

Force is the influence of either pull or pushes in the body. Basically, gravitation forces, nuclear forces, and friction forces are the types of forces. For e.g. when the wall is hit by a hand then a force is exerted by the hand on the wall as well as the wall also exerts a force on the hand. There are different laws given to Newton to understand force.

Newton is a unit of force used by physicists that is part of the International System (SI). The force required to move a body weighing one kilogram one meter per second is known as a newton.

Given:

The mass of the block, m = 2 kg,

The oscillation of spring, x  = 3 cos 4t,

Calculate the omega  by comparing the standard equation given below,

[tex]x = A cos \omega t[/tex]

ω = 4

Calculate the spring constant by the formula given below,

[tex]\omega = \sqrt{\frac{k}{m} }[/tex]

4² = k / 2

k = 32 N / m

Therefore, the force constant k of the spring, if The oscillation of the 2 kg mass of spring is described by x = 3.0 cos (4.0 t) is 32 N / m.

To know more about Force:

https://brainly.com/question/13191643

#SPJ2

Answer:

Planck postulated that the energy of light is proportional to the frequency, and the constant that relates them is known as Planck's constant (h). His work led to Albert Einstein determining that light exists in discrete quanta of energy, or photons.

Explanation:

Answer:

Energy does not occur in continuous amounts but in discrete amounts described by:

E = N h ∨   where N is the number of quanta (energy units), ∨ the frequency of the energy, and h Planck's constant (6.63E-34 J-sec)

Hi there!

With the work-energy theorem for oscillating springs:

ME = KE + PE

[tex]ME = \frac{1}{2}mv^2 + \frac{1}{2}kx^2[/tex]

Where:

m = mass (kg)

v = velocity (m/s)

k = Spring Constant (N/m)

x = displacement from equilibrium (m)

If the object is at the equilibrium position, there is NO potential energy since:

[tex]\frac{1}{2}k(0^2) = 0 J[/tex]

Thus:

[tex]ME = \frac{1}{2}mv^2[/tex]

Plug in the given values:

[tex]ME = \frac{1}{2}(0.50)(1.5^2) = \boxed{0.5625 \text{ J}}[/tex]

The moment of inertia of the wheel is 4.27 kg.m²

The kinematics equation explains the variables associated and related of motion.

From the information given, applying the kinematic equation of motion to determine the acceleration of the block, we have:

[tex]\mathbf{y = ut + \dfrac{1}{2}at^2}[/tex]

[tex]\mathbf{y = (0)t + \dfrac{1}{2}at^2}[/tex]

[tex]\mathbf{y = \dfrac{1}{2}at^2}[/tex]

Making acceleration (a) the subject, we have:

[tex]\mathbf{a = \dfrac{2y}{t^2}}[/tex]

where;

[tex]\mathbf{a = \dfrac{2\times 1.5 }{2.0^2}}[/tex]

a = 0.75 m/s²

The angular acceleration of the wheel can be estimated by the formula:

[tex]\mathbf{\alpha = \dfrac{a}{r}}[/tex]

[tex]\mathbf{\alpha = \dfrac{0.75 \ m/s^2}{0.40 \ m}}[/tex]

[tex]\mathbf{\alpha = 1.875 \ rad/s^2}[/tex]

Finally, the torque acting on the wheel is:

[tex]\mathbf{\tau = I \alpha}[/tex]

[tex]\mathbf{Tr = I \alpha}[/tex]

where;

∴

[tex]\mathbf{I =\dfrac{T\times r}{\alpha} }[/tex]

[tex]\mathbf{I =\dfrac{20 \ N\times 0.40 \ m}{1.875 \ rad/s^2} }[/tex]

I = 4.27 kg.m²

Learn more about moment of inertia here:

https://brainly.com/question/15246709?referrer=searchResults

We have that for the Question "find (a) the mass of CCl4 per second that passes point A and (b) the concentration of CCl4 at point A."

Answers:

From the question we are told

The concentration of [tex]CCl_4[/tex] at the left end of the tube is maintained at 1.71 x 10-2 kg/m3, and the diffusion constant is 21.9 x 10-10 m2/s. The CCl4 enters the tube at a mass rate of 5.86 x 10-13 kg/s

A) the mass flow rate of CCI_4 as it passes point A is the same as the mass flow rate at which CCI_4 enters the left end of the tube

Therefore, the mass flow rate of CCI_4 at point A

=  [tex]5.86*10^{-13} kg/s[/tex]

B) From Fick's law

[tex]\deltaC = \frac{mL}{DAt}\\\\ Assume L = 5*10^{-3}, A = 3*10^{-4}\\\\\deltaC = \frac{5.86*10^{-13} * 5*10^{-3}}{21.9*10^{-10} * 3*10^{-4}}\\\\\deltaC = 4.46*10^{-3}kg/m^3[/tex]

Then,

[tex]Concentration = 1.71*10^{-2} - 4.46*10^{-3}\\\\= 12.6*10^{-3}kg/m^3[/tex]

For more information on this visit

https://brainly.com/question/23379286

After time t, the position function of the ball is determined as [tex]y(t) = h_0\ +\ v_0t \ - \ \frac{1}{2} gt^2[/tex]

The given parameters;

The position function of the ball after time t, is calculated as follows;

[tex]y(t) = h_0\ +\ v_0t \ - \ \frac{1}{2} gt^2[/tex]

The negative sign of acceleration of due to gravity is because the ball is moving upward against gravity.

Thus, after time t, the position function of the ball is determined as [tex]y(t) = h_0\ +\ v_0t \ - \ \frac{1}{2} gt^2[/tex]

Learn  more here:https://brainly.com/question/12666534

Answer:

If the observer is stationary but the source moves toward the observer at a speed vs, the observer still intercepts more waves per second and the frequency goes up. This time it is the wavelength of the wave received by the observer that is effectively shifted by the motion, rather than the speed.

Answer:

200 feet

Explanation:

This question involves the concepts of the law of conservation of momentum, velocity, and mass.

The two quantities, the students should multiply before and after the collision are "A. mass and velocity".

According to the law of conservation of momentum, In an isolated system, the total momentum of the system before the collision is always equal to the total momentum of the system after the collision.

To prove the law of conservation of momentum, consider two balls of masses ‘m₁’ and ‘m₂’, moving with velocities ‘u₁’ and ‘u₂’, respectively, such that u₁ is greater than u₂. After some time, these balls collide with each other and their velocities become ‘v₁’ and ‘v₂’, respectively.

This situation is illustrated in the attached picture.

So, according to the law of conservation of momentum:

Total Momentum Before Collision = Total Momentum After Collision

m₁u₁ + m₂u₂ = m₁v₁ + m₂v₂

Learn more about the law of conservation of momentum here:

https://brainly.com/question/1113396?referrer=searchResults

Sorry this is a year late, but here it is for those of you who are stuck on the same thing.

NOTE: Please Check and Confirm That You Are On The Same Assignment with The Same Questions and Number of Questions. Thank You and Good Luck!

1. Mass & velocity

2. The total momentum after the collision is the same as the total momentum before the collision.

3. 0.54 kg⋅m/s

4. The system has external forces, such as friction and air resistance, acting on it.

5. 3.0 m/s

Answer:

WD = 960 J

Explanation:

WD = work done (J)

F = force (N)

s = displacement (m)

m = mass (kg) = 60

a = acceleration (m/s²) = 2

t = time (s) = 4

u = initial velocity (m/s) = 0

The formulas or equations that are relevant ate:

WD = F × s

F = m × a

s = u + at

We want to find WD, so we need to now the force and the displacement (or distance);

We calculate force, in Newtons, with the formula F = ma:

F = 60 × 2

F = 120 N

We also need displacement, which get with the formula s = u + at:

s = 0 + 2(4)

s = 8 m

Now we have F and s, we can calculate WD:

WD = 120 × 8

WD = 960 J

Methodology:

Starting with what you want to find, in this case WD, list the formula/s you could use;

Then, identify the information you need for the formula and whether or not you are given that information;

Next, list the formulas for the information you don't have and once again, identify whether the information you are given is sufficient to use those formulas;

Once you can calculate all necessary information, then proceed to calculate the values and finally, the answer;

I suggest also keeping a list of all the variables as I've done at the top of my working so it is clear for you to see and use.

Answer:

10.83 Amperes

Explanation:

if   A ⇒ current

W = VA

1300 = 120 x A

1300 / 120 = A

10.83 = A

Answer:

c.

Explanation:

If the two plates that meet at a convergent plate boundary both are of oceanic crust, the older, denser plate will subduct beneath the less dense plate. The older plate subducts into a trench, resulting in earthquakes. Melting of mantle material creates volcanoes at the subduction zone.

When two oceanic plates converge, the denser plate will end up sinking below the less dense plate, leading to the formation of an oceanic subduction zone. Old, dense crust tends to be subducted back into the earth. An example of a subduction zone formed from a convergent boundary is the Chile-Peru trench….

Answer:

a divergent plate boundary

Answer: Are these free point?

Explanation: