Answer:
Keq = 0.217
Explanation:
Let's determine the equilibrium reaction.
In gaseous state, water vapor can be decomposed to hydrogen and oxygen and this is a reversible reaction.
2H₂(g) + O₂(g) ⇄ 2H₂O (g) Keq
Let's make the expression for the equilibrium constant
Products / Reactants
We elevate the concentrations, to the stoichiometry coefficients.
Keq = [H₂O]² / [O₂] . [H₂]²
Keq = 0.250² / 0.8 . 0.6² = 0.217
Calculate the amount of HCl in grams required to react with 3.75 g of CaCO3 according to the following reaction: CaCO3(s) + 2 HCl(aq) → CaCl2(aq) + H2O(l) + CO2(g)
Answer:
The correct answer is 2.75 grams of HCl.
Explanation:
The given balanced equation is:
CaCO₃ (s) + 2HCl (aq) ⇒ CaCl₂ (aq) + H₂O (l) + CO₂ (g)
Based on the given information, one mole of calcium carbonate is reacting with two moles of HCl. The molecular mass of HCl is 36.5 grams, thus, the mass of 2 moles of HCl will be, 36.5 × 2 = 73 grams
The molecular mass of CaCO₃ is 100 gram per mole, that is, the mass of 1 mole of CaCO₃ is 100 grams, therefore, the mass of HCl required for reacting with 3.75 grams of CaCO₃ will be,
= 3.75 × 2 × 36.5 / 100 = 2.74 grams of HCl.
Using the periodic table provided, identify the atomic mass of sodium (Na) . Your answer should have 5 significant figures. Provide your answer below: __ amu
Answer:
Your answer will either be 22.9897 or 22.990 !!
Explanation:
A strontium hydroxide solution is prepared by dissolving 10.60 gg of Sr(OH)2Sr(OH)2 in water to make 47.00 mLmL of solution.What is the molarity of this solution? Express your answer to four significant figures and include the appropriate units.
Answer:
Approximately [tex]1.854\; \rm mol\cdot L^{-1}[/tex].
Explanation:
Note that both figures in the question come with four significant figures. Therefore, the answer should also be rounded to four significant figures. Intermediate results should have more significant figures than that.
Formula mass of strontium hydroxideLook up the relative atomic mass of [tex]\rm Sr[/tex], [tex]\rm O[/tex], and [tex]\rm H[/tex] on a modern periodic table. Keep at least four significant figures in each of these atomic mass data.
[tex]\rm Sr[/tex]: [tex]87.62[/tex].[tex]\rm O[/tex]: [tex]15.999[/tex].[tex]\rm H[/tex]: [tex]1.008[/tex].Calculate the formula mass of [tex]\rm Sr(OH)_2[/tex]:
[tex]M\left(\rm Sr(OH)_2\right) = 87.62 + 2\times (15.999 + 1.008) = 121.634\; \rm g \cdot mol^{-1}[/tex].
Number of moles of strontium hydroxide in the solution[tex]M\left(\rm Sr(OH)_2\right) =121.634\; \rm g \cdot mol^{-1}[/tex] means that each mole of [tex]\rm Sr(OH)_2[/tex] formula units have a mass of [tex]121.634\; \rm g[/tex].
The question states that there are [tex]10.60\; \rm g[/tex] of [tex]\rm Sr(OH)_2[/tex] in this solution.
How many moles of [tex]\rm Sr(OH)_2[/tex] formula units would that be?
[tex]\begin{aligned}n\left(\rm Sr(OH)_2\right) &= \frac{m\left(\rm Sr(OH)_2\right)}{M\left(\rm Sr(OH)_2\right)}\\ &= \frac{10.60\; \rm g}{121.634\; \rm g \cdot mol^{-1}} \approx 8.71467\times 10^{-2}\; \rm mol\end{aligned}[/tex].
Molarity of this strontium hydroxide solutionThere are [tex]8.71467\times 10^{-2}\; \rm mol[/tex] of [tex]\rm Sr(OH)_2[/tex] formula units in this [tex]47\; \rm mL[/tex] solution. Convert the unit of volume to liter:
[tex]V = 47\; \rm mL = 0.047\; \rm L[/tex].
The molarity of a solution measures its molar concentration. For this solution:
[tex]\begin{aligned}c\left(\rm Sr(OH)_2\right) &= \frac{n\left(\rm Sr(OH)_2\right)}{V}\\ &= \frac{8.71467\times 10^{-2}\; \rm mol}{0.047\; \rm L} \approx 1.854\; \rm mol \cdot L^{-1}\end{aligned}[/tex].
(Rounded to four significant figures.)
Convert cm/S^2 to km/h^
2
Answer:
The answer to this question is 0.072km/h
1. (2 pts) How does the wavelength of a radio wave relate to its frequency? a.) The wavelength gets longer as the frequency increases b.) The wavelength gets shorter as the frequency increases c.) There is no relationship between wavelength and frequency d.) The wavelength depends on the bandwidth of the signal 2. (2 pts) List the following EMR in the order of increasing wavelength starting with the lowest: Infrared radiation Ultraviolet radiation X-rays Visible light 3. (3 pts) Green light has a wavelength of 5.0 x 102 nm. What is the energy, in joules, of ONE photon of green light? What is the energy, in joules of 1.0 mol of photons of green light?
Answer:
1. b.) The wavelength gets shorter as the frequency increases
2. X-rays < Ultraviolet radiation < Visible light < Infrared radiation
3. 2 × 10⁵ J
Explanation:
1. Wavelength vs frequency
fλ= c
f = c/λ
Thus, frequency and wavelength are inversely proportional.
The wavelength increases (gets longer) as the frequency decreases.
2. Order of increasing wavelength
X-rays < Ultraviolet radiation < Visible light < Infrared radiation
3. Energy of green light
(a) Energy of 1 photon
λ = 5 × 10² nm = 5 × 10² × 10⁻⁹ m = 5 × 10⁻⁷ m
fλ = c
f = c/λ = (2.998 × 10⁸ m·s⁻¹)/(5 × 10⁻⁷ m) = 6 × 10¹⁴ s⁻¹
E = hf = 6.626 × 10⁻³⁴ J·s × 6 × 10¹⁴ s⁻¹ = 4 × 10⁻¹⁹ J
(b) Energy of 1.0 mol of photons
[tex]\text{Energy} = \text{1.0 mol photons} \times \dfrac{6.022 \times 10^{23}\text{ photons }}{\text{1 mol photons }} \times \dfrac{4 \times 10^{-19}\text{ J}}{\text{1 photon }} = \mathbf{2 \times 10^{5}} \textbf{ J}\\\\\text{The energy of 1.0 mol of photons of green light is $\large \boxed{\mathbf{2 \times 10^{5}}\textbf{ J}}$}[/tex]
Note: The answer can have only one significant figure because that is all you gave for the wavelength of the light.
If a boy (m = 50kg) at rest on skates is pushed by another boy who exerts a force of 200 N on him and if the first boy's final velocity is 8 m/s, what was the contact time? t= s
Answer:
t = 2 seconds
Explanation:
It is given that,
Mass of a boy, m = 50 kg
Initial speed of boy, u = 0
Final speed of boy, v = 8 m/s
Force exerting by another boy, F = 200 N
Let t is the time of contact. The force acting on an object is given by :
F = ma
a is acceleration
So,
[tex]F=\dfrac{m(v-u)}{t}\\\\t=\dfrac{m(v-u)}{F}\\\\t=\dfrac{50\times 8}{200}\\\\t=2\ s[/tex]
So, the contact time is 2 seconds.
Answer:
t=2 s
Explanation:
Draw the Lewis structure of ethyne (C₂H₂) and then choose the appropriate pair of molecular geometries of the two central atoms. Your answer choice is independent of the orientation of your drawn structure.
A) linear / linear
B) trigonal/pyramidal
C) pyramidal/trigonal
D) trigonal pyramidal/trigonal pyramidal
E) planar / linear
Answer:
A) linear / linear
Explanation:
In this case, we have a triple bond beetween the atoms (See figure 1). If we have this triple bond we will have an Sp hybridization (in both carbons). We have to remember the relationship between the geometry and the hybridization:
-) Sp3 = Tetrahedral
-) Sp2 = Trigonal
-) Sp = Linear
Due to the hybridization, we will have a linear structure between the atoms. The angle between the atoms is 180º (See figure 2).
So, if we have a hybridization Sp for both carbons, we will have a linear geometry in each carbon. Therefore, the answer is A.
a) During the workup of the reaction, an aqueous solution of sodium bicarbonate was added to the cooled reaction mixture. Why was this done
Answer:
The purpose of adding an aqueous solution of sodium bicarbonate is either to extract a certain compound or to remove/neutralize acidic compounds present in the reaction mixture.
Explanation:
Upon adding sodium bicarbonate, carbon dioxide is released (gaseous state at room temperature), which helps build up pressure that is able to push out the unwanted gas/liquid.
1. In this experiment, the procedure instructs you to dissolve solid potassium hydrogen tartrate (KHT) in two different solvents. What are these two solvents? (2 pts)
Answer:
Water
Explanation:
Solid potassium hydrogen tartrates (KHT) is soluble in water. This is especially at room temperature.
The solvent for KHT is water.
when air molecules collide with things around us, it produces _______ (2 words), which is measured with a _______.
✔ When air molecules collide with things around us, it produces pressing force , which is measured with a Pressure gauge.
In movies about space, there is frequently a space battle scene where ships
explode in big fireballs. Why are these scenes unscientific?
O
A. The explosion would not be a fireball, but would point towards the closest gravity
source, a planet or star. They are only fireballs on Earth because we are already on a
gravity source.
B. None of these
C. There is no oxygen in space, so there can be no combustion.
OD. Space is very cold, there would not be enough heat energy for an explosion to occur.
-
The correct answer is C. There is no oxygen in space, so there can be no combustion.
Explanation:
Fire and flames are the result of a chemical process known as combustion. Moreover, for combustion to occur there are two essential elements. The first one is a fuel or a substance that releases energy and ignites, and the second one is an oxidant, which accepts electrons. This mix and reaction causes high temperatures and release of heat in the form of fire and flames.
This implies, that for fireballs or any other form of fire to exist there must be oxygen or any substance that replaces it. This does not occur in space because the levels of oxygen are extremely low, this means, at least oxygen is added fireballs are not possible in this context as there is no oxygen, and therefore no combustion (Option C).
Answer:
C.) There is no oxygen in space, so there can be no combustion.
Explanation:
I got it correct on founders edtell
A compound containing only C, H, and O, was extracted from the bark of the sassafras tree. The combustion of 32.3 mg produced 87.7 mg of CO2 and 18.0 mg of H2O. The molar mass of the compound was 162 g/mol. Determine its empirical and molecular formulas.
Answer:
Empirical formula: C₅H₅O
Molecular formula: C₁₀H₁₀O₂
Explanation:
When a compound containing C, H and O elements is combusted, the general reaction is:
CₐHₓOₙ + O₂ → a CO₂ + X/2 H₂O
Thus, you can find moles of carbon and hydrogen knowing moles of CO₂ and H₂O that are produced.
Moles CO₂ = Moles C = 0.0877g × (1mol / 44g) =
2.0x10⁻³ moles of CO₂ = moles C
Moles H₂O = 1/2 Moles H = 0.018g × (1mol / 18g) =
1x10⁻³ moles of H₂O; 2.0x10⁻³ moles H
The mass of the moles of C and H are:
2x10⁻³ moles C ₓ (12g / mol) = 0.024g C
2x10⁻³ moles H ₓ (1g / mol) = 0.002g H
Thus, mass of Oxygen is 32.3mg - 24mg C - 2mg O = 6.3mg O
Moles are:
0.0063g O ₓ (1mol / 16g) = 4x10⁻⁴ moles O
Empirical formula is the simplest ratio of atoms in a compound. Dividing each amount of moles for each atom in the 4x10⁻⁴ moles of oxygen (The lower moles), you will obtain:
C: 2.0x10⁻³ / 4x10⁻⁴ = 5
H: 2.0x10⁻³ / 4x10⁻⁴ = 5
O: 4x10⁻⁴ / 4x10⁻⁴ = 1
Thus, empirical formula is:
C₅H₅OThe molar mass of the empirical formula is:
12×5 + 1×5 + 16×1 = 81g/mol
As molar mass of the compound is 162g/mol, molecular formula is twice empirical formula:
C₁₀H₁₀O₂Which phase change is an example of an exothermic process?
A.
solid to liquid
B.
solid to gas
C.
liquid to solid
D.
liquid to gas
E.
solid to plasma
Reset
Answer:
C
Explanation:
Turning liquid to a solid is like freezing water to ice and requires the water to LOSE (release) heat causing an exothermic reaction.
How would you monitor the progress of a neutralization reaction? Question 2 options: We will use a funnel to separate the solid as it forms We will use a balance to see the changes in mass We will use a thermometer to check the changes in temperature We will use an acid-base indicator to see changes in color depending on the pH
Answer:
We will use an acid-base indicator to see changes in colour depending on the pH
Explanation:
The pH changes during a titration, so you could use an acid-base indicator to follow the changes in pH.
A is wrong. An acid-base titration does not usually form a solid, and it would be impractical to isolate a solid with a funnel.
B is wrong. There are no changes in mass.
C is wrong. Any changes in temperature would be too small to measure precisely with an ordinary thermometer.
The best way to monitor the progress of a neutralization reaction such as acid-base titration: D. Use an acid-base indicator to observe the changes in color depending on the pH.
The chemical reaction that occurs when you mix an acid and a base together is referred to as neutralization reaction.
In a neutralization reaction, what is formed is salt and water.
Acid-base titration is a neutralization method.
During acid-base titration, the neutralization reaction that occurs is usually monitored by observing the pH changes that occurs.
Change in pH is an indicator that there is progress in the neutralization reaction.
An acid-base indicator, can be used to detect the changes that occur via the pH changes in relation to the color change.
Therefore, the best way to monitor the progress of a neutralization reaction such as acid-base titration: D. Use an acid-base indicator to observe the changes in color depending on the pH.
Learn more about neutralization reaction here:
https://brainly.com/question/12442828
Ag+(aq)+2NH3(aq)⇌Ag(NH3)2+(aq) : A g + ( a q ) + 2 N H 3 ( a q ) ⇌ A g ( N H 3 ) 2 + ( a q ) : blank is the Lewis acid and blank is the Lewis base. is the Lewis acid and A g + ( a q ) + 2 N H 3 ( a q ) ⇌ A g ( N H 3 ) 2 + ( a q ) : blank is the Lewis acid and blank is the Lewis base. is the Lewis base.
Answer:
Silver ion - Lewis acid, Ammonia - Lewis base
Explanation:
The reaction is given as;
Ag+(aq) + 2NH3(aq) ⇌ [Ag(NH3)]2+(aq)
A lewis acid is an electron pair acceptor. While a lewis base is any substance that that can donate a pair of nonbonding electrons.
This reaction however is a complexation reaction, where ammonia is reacting with the silver ion.
Silver ion accepts electrons in this reaction, hence it is the lewis acid. The ammonia on the other hand donates the electrons used in bonding so it is the lewis base.
Modern atomic theory states that atoms are neutral. How is this neutrality achieved in atoms? (2 points)
Consider the following reaction: Br2(g) + 3 F2(g) LaTeX: \rightarrow→ 2 BrF3(g) LaTeX: \Delta H_{rxn}Δ H r x n= ‒836 kJ/mol Bond Bond Energy (kJ/mol) Br–Br 193 F–F 155 Using the above bond dissociation energies, calculate the energy, in kJ/mol, of a Br–F bond.
Answer: The energy of a Br–F bond is 110 kJ/mol
Explanation:
The balanced chemical reaction is,
[tex]Br_2(g)+3F_2(g)\rightarrow 2BrF_3(g)[/tex]
The expression for enthalpy change is,
[tex]\Delta H=\sum [n\times B.E(reactant)]-\sum [n\times B.E(product)][/tex]
[tex]\Delta H=[(n_{Br_2}\times B.E_{Br_2})+(n_{F_2}\times B.E_{F_2}) ]-[(n_{BrF_3}\times B.E_{BrF_3})][/tex]
[tex]\Delta H=[(n_{Br_2}\times B.E_{Br-Br})+(n_{F_2}\times B.E_{F_F}) ]-[(n_{BrF_3}\times 3\times B.E_{Br-F})][/tex]
where,
n = number of moles
Now put all the given values in this expression, we get
[tex]\Delta H=[(1\times 193)+(3\times 155)]-[(2\times 3\times B.E_{Br-F})][/tex]
[tex]B.E_{Br-F}=110kJ/mol[/tex]
Thus the energy, in kJ/mol, of a Br–F bond is 110
Rank the compounds in each set in order of increasing acid strength.
(a) CH3CH2COOH CH3CHBrCOOH CH3CBr2COOH
(b) CH3CH2CH2CHBrCOOH CH3CH2CHBrCH2COOH CH3CHBrCH2CH2COOH
Answer:
See explanation
Explanation:
For this question, we have to remember the effect of an atom with high electronegativity as "Br". If the "Br" atom is closer to the carboxylic acid group (COOH) we will have an inductive effect. Due to the electronegativity of Br, the electrons of the C-H bond would be to the Br, then this bond would be weaker and the compound will be more acid (because is easier to produce the hydronium ion [tex]H^+[/tex]).
With this in mind, for A in the last compound, we have 2 Br atoms near to the acid carboxylic group, so, we will have a high inductive effect, then the C-H would be weaker and we will have more acidity. Then we will have the compound with only 1 Br atom and finally, the last compound would be the one without Br atoms.
In B, the difference between the molecules is the position of the "Br" atom in the molecule. If the Br atom is closer to the acid group we will have a higher inductive effect and more acidity.
See figure 1
I hope it helps!
A diode has IS = 10−17 A and n = 1.05. (a) What is the diode voltage if the diode current is 70 μA? (b) What is the diode current for VD = 0.1 mV?
Answer:
(a) The diode voltage, [tex]V_D =[/tex] 0.776 V
(b) The diode current, [tex]I_D =[/tex] 3.81 x 10⁻²⁰ A
Explanation:
Given;
saturation current in diode, [tex]I_s[/tex] = 10⁻¹⁷ A
nonideality factor, n = 1.05
(a) the diode voltage
Given diode current, [tex]I_D[/tex] = 70 μA = 7 x 10⁻⁶ A
Diode voltage is calculated as;
[tex]V_D = nV_Tln(1+ \frac{I_D}{I_S} )[/tex]
Where;
[tex]V_T[/tex] is thermal voltage at 25°C = 0.025
[tex]V_D = 1.05 * 0.025 ln(1+ \frac{70*10^{-6}}{1*10^{-17}})\\\\V_D = 0.02625ln(1+ 7*10^{12})\\\\V_D = 0.776 \ V[/tex]
b) the diode current for VD = 0.1 mV
[tex]V_D = nV_Tln(1 +\frac{I_D}{I_S} )\\\\ln(1 +\frac{I_D}{I_S} ) = \frac{V_D}{nV_T} \\\\ln(1 +\frac{I_D}{I_S} ) = \frac{0.1*10^{-3}}{1.05*0.025} \\\\ln(1 +\frac{I_D}{I_S} ) = 0.00381\\\\1 +\frac{I_D}{I_S} = e^{0.00381}\\\\1+ \frac{I_D}{I_S}= 1.00381\\\\ \frac{I_D}{I_S}=1.00381 - 1\\\\ \frac{I_D}{I_S}= 0.00381\\\\I_D = 0.00381(I_S)\\\\I_D = 0.00381(10^{-17})\\\\I_D = 3.81*10^{-20} \ A[/tex]
Content attribution
QUESTION 2 • 1 POINT
Which anion would bond with K+ in a 1: 1 ratio to form a neutral ionic compound?
The given question is incomplete. The complete question is :
Which anion would bond with K+ in a 1: 1 ratio to form a neutral ionic compound?
a) [tex]O^{2-}[/tex]
b) [tex]F^{-}[/tex]
c) [tex]N^{3-}[/tex]
d) [tex]S^{2-}[/tex]
Answer: b) [tex]F^{-}[/tex]
Explanation:
For formation of a neutral ionic compound, the charges on cation and anion must be balanced. The cation is formed by loss of electrons by metals and anions are formed by gain of electrons by non metals.
Here potassium is having an oxidation state of +1 called as cation and thus is an anion must have an oxidation state of -1 if they have to combine in 1: 1 ratio to give neutral ionic compound.
Thus the anion has to be [tex]F^-[/tex] which combines with [tex]K^+[/tex] in 1: 1 ratio to give [tex]KF[/tex]
A 45.0 mL sample of 0.020 M acetic acid (HC2H3O2) is titrated with 0.020 M NaOH.? Determine the pH of the solution after adding 35.0 mL of any NaOH. (Ka of acetic acid is 1.8 x 10-5) HC2H3O2 (aq) + NaOH (aq) D NaC2H3O2(aq) + H2O (l) (Hint: Calculate new concentration and ICE table)
Answer:
Explanation:
CH₃COOH + NaOH = CH₃COONa + H₂O .
.02M
CH₃COOH = CH₃COO⁻ + H⁺
C xC xC
Ka = xC . xC / C = x² C
1.8 x 10⁻⁵ = x² . .02
x² = 9 x 10⁻⁴
x = 3 x 10⁻²
= .03
concentration of H⁺ = xC = .03 . .02
= 6 x 10⁻⁴ M , volume = 45 x 10⁻³ L
moles of H⁺ = 6 X 10⁻⁴ x 45 x 10⁻³
= 270 x 10⁻⁷ moles
= 2.7 x 10⁻⁵ moles
concentration of NaOH = .0200 M , volume = 35 x 10⁻³ L
moles of Na OH = 2 X 10⁻² x 35 x 10⁻³
= 70 x 10⁻⁵ moles
=
NaOH is a strong base so it will dissociate fully .
there will be neutralisation reaction between the two .
Net NaOH remaining = (70 - 2.7 ) x 10⁻⁵ moles
= 67.3 x 10⁻⁵ moles of NaOH
Total volume = 45 + 35 = 80 x 10⁻³
concentration of NaOH after neutralisation.= 67.3 x 10⁻⁵ / 80 x 10⁻³ moles / L
= 8.4125 x 10⁻³ moles / L
OH⁻ = 8.4125 x 10⁻³
H⁺ = 10⁻¹⁴ / 8.4125 x 10⁻³
= 1.1887 x 10⁻¹²
pH = - log ( 1.1887 x 10⁻¹² )
= 12 - log 1.1887
= 12 - .075
= 11.925 .
Compare strontium with rubidium in terms of the following properties:
a. Atomic radius, number of valence electrons, ionization energy.
b. Strontium is smaller than rubidium.
c. Rubidium is smaller than strontium.
d. Strontium has more valence electrons.
e. Rubidium has more valence electrons.
f. Strontium has a larger ionization energy.
g. Rubidium has a larger ionization energy.
Answer:
Strontium is smaller
Strontium has the higher ionization energy
Strontium has more valence electrons
Explanation:
It must be understood that both elements belong to the same period i.e the same horizontal band of the periodic table
While Rubidium is an alkali metal(group 1) while Strontium is an alkali earth metal(group 2)
Since they are in the same period, periodic trends would be useful in evaluating their properties
In terms of atomic radius, rubidium is larger meaning it has a bigger atomic size
Generally, across the periodic table, atomic radius is expected to decrease and thus Rubidium which is leftmost is expected to have the higher atomic radius
Since strontium belongs to group 2 of the periodic table, it has 2 valence electrons which is more than the single valence electron that rubidium which is in group 1 has
In terms of ionization energy, the atom with the higher number of valence electrons will have the higher ionization energy which is strontium in this case
How many moles of HNO3 will be produced 3 NO2+H2O=2HNO3+ NO
Answer:
2 moles of HNO3
Explanation:
The equation seems to be balanced correctly. The problem is we done know what you started with. We will assume it is 3 moles of NO2.
If that is the case then 2 moles of HNO3 will be produced.
A reaction mixture at 175 K initially contains 522 torr of NO and 421 torr of O2. At equilibrium, the total pressure in the reaction mixture is 748 torr. Calculate Kp at this temperature. Express your answer to three significant figures.
Answer:
[tex]Kp=0.0386[/tex]
Explanation:
Hello,
In this case, the undergoing chemical reaction is:
[tex]2NO+O_2\rightleftharpoons 2NO_2[/tex]
For which the equilibrium expression is:
[tex]Kp=\frac{p_{NO_2}^2}{p_{NO}^2p_{O_2}}[/tex]
Whereas, at equilibrium, each pressure is computed in terms of the initial pressure and the reaction extent via:
[tex]p_{NO_2}=2x\\p_{NO}=522-2x\\p_{O_2}=421-x[/tex]
And the total pressure:
[tex]p_{eq}=p_{NO_2}+p_{NO}+p_{O_2}\\\\p_{eq}=2x+522-2x+421-x\\\\p_{eq}=943-x[/tex]
Yet it is 748 torr, for which the extent is:
[tex]x=943-p_{eq}=943-748\\\\x=195torr[/tex]
Therefore, Kp turns out:
[tex]Kp=\frac{(2x)^2}{(522-2x)^2(421-x)}\\\\Kp=\frac{(2*195)^2}{(522-2*195)^2(421-195)}\\\\Kp=0.0386[/tex]
Best regards.
Stote 4 ways in which excesine alcohol conscuption is
harmful to humans
Answer:
An addiction could occur, maybe an overdose?, this could lead to death and maybe you would do unreasonable things which could get you fined or arrested.
Explanation:
Answer:
Excessive alcohol is harmful because you could get addicted.Alcohol can affect your nervous system.Your sugar levels will not be good.Parts of your body and organs will become inflamed.You can get a larger amount of muscle cramps.Also you will not be able to get enough vitamins in your body.Accidents that lead to deaths could occur.You would do crazy actions with things such as theft or breaking into a house which could get you fined or arrested.Too much alcohol can lead to high blood pressure, disease and even strokes.You can have birth defectsWith excessive alcohol you can get osteoporosis.You can also get your immune system weakened.Finally, alcohol can lead to cancer.Hope this helped,
Kavitha
Which Group is in the second column of the periodic table?
A. Noble gases
B. Halogens
C. Alkali metals
D. Alkaline earth metals
Answer:
Hey there!
That would be the alkaline earth metals.
Hope this helps :)
Answer: alkaline earth metals
Explanation:
An oxide has a chemical formula with the form X2O3. Which group is element X more likely to be a member of? Select the correct answer below: group 12 group 13 group 14 group 2
Answer:
Group 13
Explanation:
You know X has 3 valence electrons, as oxygen has a subscript of 3. This means X has an ionic charge of +3. Group 13 consists mainly of metalloids but it also has metals such as aluminum, which has a +3 charge. If you use aluminum as an example, you know that when combined with oxygen, it forms Al2O3. Group 12 has transition metals that don't have +3 ionic charges, group 14 has metalloids, metals that don't have ionic charges of +3, and nonmetals, and group 2 has metals with ionic charges of +2. Group 13 is the answer.
When silver nitrate is added to an aqueous solution of magnesium chloride, a precipitation reaction occurs that produces silver chloride and magnesium nitrate. When enough AgNO3 is added so that 34.3 g of MgCl2 react, what mass of the AgCl precipitate should form
Answer:
103.62 g of AgCl.
Explanation:
Step 1:
The balanced equation for the reaction. This is given below:
2AgNO3 + MgCl2 —> 2AgCl + Mg(NO3)2
Step 2:
Determination of the mass of MgCl2 that reacted and the mass of AgCl produced from the balanced equation.
This is illustrated below:
Molar mass of MgCl2 = 24 + (2x35.5) = 95 g/mol
Mass of MgCl2 from the balanced equation = 1 x 95 = 95 g
Molar mass of AgCl = 108 + 35.5 = 143.5 g/mol
Mass of AgCl from the balanced equation = 2 x 143.5 = 287 g
Thus, from the balanced equation above,
95 g of MgCl2 reacted to produce 287 g of AgCl.
Step 3:
Determination of the mass of AgCl produced from the reaction of 34.3 g of MgCl2.
The mass of AgCl produced from the reaction can be obtained as follow:
Form the balanced equation above,
95 g of MgCl2 reacted to produce 287 g of AgCl.
Therefore, 34.3 g of MgCl2 will react to produce = (34.3 x 287)/95 = 103.62 g of AgCl.
Therefore, 103.62 g of AgCl were produced from the reaction.
A student mixes 2.83 mL of benzoyl chloride with excess 15 M NH4OH to produce 1.95 g of benzamide. What is the percent yield of this student's experiment
Answer:
Explanation:
The reaction of benzoyl chloride with NH₄OH to produce benzamide is:
Benzoyl chloride + ammonia → Benzamide + NH₄Cl
Molar mass of benzoyl chloride: 140.57 g/mol. Density 1.21g/mL
Molar mass benzamide: 121.14g/mol.
To know percent yield you must know the theoretical yield of the reaction (How many grams are produced assuming a yield of 100%). Percent yield will be (Actual yield / Theoretical Yield) ₓ 100
Moles of 2.83mL of benzoyl chloride are:
2.83mL ₓ (1.21g/mL) ₓ (1mol / 140.57g) = 0.02436 moles of benzoyl chloride.
As 1 mole of benzoyl chloride produce 1 mole of benzamide (Theoretical yield), theoretical moles of benzamide produced are 0.02436. In mass:
0.02436 moles ₓ (121.14g / mol) = 2.95g of benzoyl chloride
As there are produced just 1.95, percent yield is:
(1.95g / 2.95g) ₓ 100 = 66.1%
The vapor pressure of pure water at 250C is 23.77 torr. What is the vapor pressure of water above a solution that is 1.500 m glucose, C6H12O6?
Answer:
Vapor pressure of water = 23.14torr
Explanation:
When you made a solution, vapor pressure decreases following Raoult's law:
[tex]P_{solution} = X_{solvent} P_{solvent}[/tex]
Where P is vapor pressure and X mole fraction
As vapor pressure of water is 23.77torr we must find the mole fraction of water knowing the solution is 1.500m glucose (That is 1.500 moles of glucose per kg of water = 1000g of water).
1000g of H₂O are, in moles (Molar mass: 18.02g/mol):
1000g H₂O ₓ (1mole / 18.02g) = 55.5 moles of H₂O.
As we know now the solution contains 55.5 moles of water and 1.5 moles of glucose. Thus, mole fraction of water (Solvent) is:
[tex]X_{H_2O} = \frac{55.5molesH_2O}{55.5molesH_2O + 1.5 molesGlucose} = 0.9737[/tex]
Replacing in Raoult's law, pressure of water above the solution is:
[tex]P_{solution} = X_{solvent} P_{solvent}[/tex]
[tex]P_{solution} = 0.9737*23.77torr[/tex]
Vapor pressure of water = 23.14torr