Answer:
13 m
Explanation:
It is given that :
I got a haircut sitting at a place having two parallel mirrors at a distance = 6.5 m apart
My head is at a distance of 2 m from the nearer mirror.
Now the light from the back of my head must go to (6.5 - 2) = 4.5 m to the back mirror.
Then it must go to 6.5 m to the front mirror and 2 m from the front mirror to my eyes.
So in order to see the back of my head, it will be = 6.5 + 2 + 4.5 = 13 m away.
give an example of a linear device and a non linear device
Answer:
The example of the nonlinear element is a diode and some of the nonlinear elements are not there in the electric circuit is called a linear circuit. Some other examples of the non-linear elements are transistors, vacuum tubes, other semiconductor devices, iron core inductors, and transformers.
Explanation:
Two resistors 5 ohm's each can be combined to give an equivalent resistance of
Answer: 10 Ω or 2.5 Ω
Explanation:
In series resistance R = 5 Ω + 5 Ω =10 Ω. If resistors are parallel, resistance is
1/R = 1/5Ω+ 1/5Ω and R = 2,5 Ω
Part D
How do supersonic flights create sonic boom? Please explain in detail.
Answer: A sonic boom is a sound associated with shock waves created when an object travels through the air faster than the speed of sound. Sonic booms generate enormous amounts of sound energy, sounding similar to an explosion or a thunderclap to the human ear. The crack of a supersonic bullet passing overhead or the crack of a bullwhip are examples of a sonic boom in miniature. Sonic booms due to large supersonic aircraft can be particularly loud and startling, tend to awaken people, and may cause minor damage to some structures. They led to prohibition of routine supersonic flight over land. Although they cannot be completely prevented, research suggests that with careful shaping of the vehicle, the nuisance due to the sonic booms may be reduced to the point that overland supersonic flight may become a feasible option. A sonic boom does not occur only at the moment an object crosses the speed of sound; and neither is it heard in all directions emanating from the supersonic object. Rather the boom is a continuous effect that occurs while the object is travelling at supersonic speeds. But it affects only observers that are positioned at a point that intersects a region in the shape of a geometrical cone behind the object. As the object moves, this conical region also moves behind it and when the cone passes over the observer, they will briefly experience the boom.
Explanation:
As incredible as the Concorde was, the sonic booms created by its supersonic flights were so disruptive that most countries restricted or completely prohibited the aircraft from flying over land. The sonic boom, at its worst, would be heard as a very loud thunder clap that was right overhead. The force of the boom rattled windows and loosened roof tiles. But even when the sonic boom sounded like a “softer” distant thunder clap, it was distracting to people and caused disruption of sleep and interruptions in activity. Imagine that you are driving on your way to work, and with clear skies overhead, you suddenly hear the sound of thunder. Your immediate responses are most likely surprise, shock, and an instinctive search for the source. Being caught by surprise in certain situations is rather annoying, and in others, potentially dangerous. In 1964, the FAA and NASA conducted a six-month sonic boom research project in Oklahoma City – without warning residents beforehand. The experiment consisted of eight sonic booms, every day, for six months. 15,000 complaints and a class action lawsuit were filed. The government lost on appeals. Great idea, guys, just brilliant. When the Concorde was originally designed, in the early 1960s, governments and airlines around the world lined up to place orders. The plane did an around-the-world publicity trip, and was well-received. But as awareness of the sonic boom effect grew, almost every country banned the aircraft. Only the US, Great Britain, and France allowed the Concorde to enter their airspace, and then only to cities in close proximity to the ocean – NYC, London, Paris, and Washington, DC. The Concorde was specifically designed for supersonic flight (specifically, Mach 2) and was very fuel-inefficient at subsonic speeds (less than Mach 1). Unfortunately, it was thus not feasible to fly at supersonic speed over water and then at subsonic speed over land.
What causes a sonic boom?
When any object moves, it creates waves in front of and behind it. Think of the waves that a boat creates at its bow and stern. In front, the waves are compressed together as the boat sails forward. Behind, the waves spread out away from the boat. In this case, you only see the waves on the surface of the water, and it appears two-dimensional. Similar principles are at play with aircraft. In front of the nose of a plane, air is pushed together and compressed as the aircraft flies forward. Behind the plane, the air creates waves that radiate out and away in the shape of a cone – three-dimensionally.
Answer:
A sonic boom is caused by the shock waves created when an object travels through the air faster than the speed of sound.
Explanation:
When any object moves, it creates waves in front of and behind it. Think of the waves that a boat creates at its bow and stern. In front, the waves are compressed together as the boat sails forward. Behind, the waves spread out away from the boat. Similar principles are at play with aircraft. In front of the nose of a plane, air is pushed together and compressed as the aircraft flies forward. Behind the plane, the air creates waves that radiate out and away in the shape of a cone – three-dimensionally. Things get interesting, and complicated, when you fly faster than the speed of sound – supersonic flight. The nose of a supersonic aircraft pushes ahead of its forward waves. These waves get in the way of the airplane, causing compression which results in a shock wave. Actually, this creates two shocks, one forming as the aircraft passes the front of the wave and then another as it leaves the wave. The shock wave generated stays mostly behind the aircraft, and radiates out in a cone
A magnetic field is passing through a loop of wire whose area is 0.014 m^2. The direction of the magnetic field is parallel to the normal to the loop, and the magnitude of the field is increasing at the rate of 0.19 T/s.
a. Determine the magnitude of the emf induced in the loop.
b. Suppose the area of the loop can be enlarged or shrunk. If the magnetic field is increasing as in part (a), at what rate (in m^2/s) should the area be changed at the instant when B = 1.6 T if the induced emf is to be zero? (Give the magnitude of the rate of change of the area.) (m^2/s). Explain whether the area is to be enlarged or shrunk.
Answer:
a. 0.00266v
b. -0.0016625
the area should be shrunk
Explanation:
the magnitude of the EMF induced in the loop
= area * rate
= 0.014 * 0.19
= 0.00266 V
B we are to solve for the rate at which the are has to be change with B = 1.6
δA/δt = -A/B * dB/dt
= (-0.014 * 0.19) /1.6
= -0.0016625
the sign is negative so the EMT is negative and so the area has to be shrunk.
Question 12 of 34 Which of the following means that an object is slowing down? /13 ယာ O A. Its velocity is decreasing. B. Its acceleration is increasing. O C. Its acceleration is decreasing. O D. Its velocity is increasing.
Answer:
A. Its velocity is decreasing
Explanation:
WHEN AN OBJECT IS DROPPED WHAT HAPPENDS TO THE POTENTIAL AND KENETIC ENERGY AS IT FALLS?
Answer:
The sum of an object's potential and kinetic energies is called the object's mechanical energy. As an object falls its potential energy decreases, while its kinetic energy increases. The decrease in potential energy is exactly equal to the increase in kinetic energy.
Explanation:
Answer:
the potential decrease and kinetic increase
Explanation:
because it goes from a state of rest to a state of movement
A piano tuner stretches a steel piano wire with a tension of 765 N. The steel wire has a length of 0.800 m and a mass of 6.00 g . What is the frequency f1 of the string's fundamental mode of vibration
Answer:
the frequency of the fundamental mode of vibration is 199.6 Hz
Explanation:
Given;
tension of the piano wire, T = 765 N
length of the steel wire, L = 0.8 m
mass of the steel wire, m = 6.00 g = 6 x 10⁻³ kg
The frequency of the fundamental mode of vibration is calculated as;
[tex]f_o = \frac{1}{2l} \sqrt{\frac{T}{\mu} }[/tex]
where;
μ is the mass per unit length [tex]= \frac{6.0 \times 10^{-3}}{0.8} = 7.5 \times 10^{-3} \ kg/m[/tex]
[tex]f_o = \frac{1}{2l} \sqrt{\frac{T}{\mu} } \\\\f_o = \frac{1}{2\times 0.8} \sqrt{\frac{765}{7.5 \times 10^{-3}} } \\\\f_o = 199.6 \ Hz[/tex]
Therefore, the frequency of the fundamental mode of vibration is 199.6 Hz
Personally, do you think you will benefit from the discoveries of Archimedes’ and Pascal’s Principles? How?
Answer:
whats the question
Explanation:
What is one benefit to measuring your body’s flexibility?
A.
meeting the national requirement for flexibility
B.
determining your muscular strength
C.
tracking your flexibility improvements over time
D.
increasing the length of your life
Answer:
C
Explanation:
if you measure your body's flexibility then you can keep track of how flexible you have gotten over time
which force acts during projectile motion
Answer: Gravity
Explanation:A projectile is an object upon which the only force is gravity. Gravity acts to influence the vertical motion of the projectile, thus causing a vertical acceleration. The horizontal motion of the projectile is the result of the tendency of any object in motion to remain in motion at constant velocity.
Which of the following is true about scientific knowledge?
OA. It can be changed as new information becomes available.
OB. It cannot be changed under any circumstances.
OC. It can be changed only if all scientists approve the change.
OD. It can be changed without information that supports the change.
The true statement about scientific knowledge is it can be changed as new information becomes available.
option A
What is scientific knowledge?Science is a dynamic process, and scientific knowledge is continually evolving as new data and evidence are discovered.
Scientific theories and hypotheses are constantly being tested and refined, and they can be modified or even rejected if new evidence contradicts them.
This is one of the key features of the scientific method - that it is self-correcting and always open to revision based on new evidence.
Thus, the true statement about scientific knowledge is it can be changed as new information becomes available.
Learn more about scientific knowledge here: https://brainly.com/question/1729104
#SPJ1
1. The nearest distance of distinct vision of
a hypermetropial person is 60 cm. If this
distance is reduced by 20 cm by using
spectacles. What is the nature and focal
length of the lens?
a. +30 cm b. +35 cm
-30 cm
d. -40 cm
c.
Answer:
The focal length of the lens is +30 and it is a convex lens.
Explanation:
Given that,
The nearest distance of distinct vision of a hypermetropial person is 60 cm, v = -60 cm
The distance is reduced by 20 cm, u = -20 cm
We need to find the nature and focal length of the lens.
Let f be the focal length of the lens. Using lens formula,
[tex]\dfrac{1}{v}-\dfrac{1}{u}=\dfrac{1}{f}\\\\\dfrac{1}{f}=\dfrac{1}{(-60)}-\dfrac{1}{(-20)}\\\\f=+30\ cm[/tex]
So, the focal length of the lens is +30 and it is a convex lens.
1. A 455 g mass, hanging at rest on a spring, stretches the spring 22.4 cm beyond its relaxed
position. What is the spring constant of that spring?
Answer:
19.9 N/m
Explanation:
From the question,
Applying Hook's law
F = Ke.................. Equation 1
Where F = Force on the spring, k = spring constant, e = extension
But the force on the spring is the weight of the mass
Therefore,
mg = ke.................. Equation 2
Where m = mass. g = acceleration due to gravity
make e the subject of the equation
e = mg/e................ Equation 3
Given: m = 455 g = 0.455 kg, e = 22.4 cm = 0.224 m,
Constant: g = 9.8 m/s²
Substitute these values into equation 3
e = (0.455×9.8)/0.224
e = 19.9 N/m
The spring constant of the given spring is 20 N/m.
The given parameters:
Mass attached, m = 455 g = 0.455 kgExtension of the spring, x = 22.4 cm = 0.224 mThe spring constant is calculated by applying Hooke's law as follows;
[tex]F = kx\\\\mg = kx\\\\k = \frac{mg}{x} \\\\k = \frac{0.455 \times 9.8}{0.224} \\\\k = 20 \ N/m[/tex]
Thus, the spring constant of the spring is 20 N/m.
Learn more about Hooke's law here: https://brainly.com/question/2648431
2. Oscar walked to the milktea house for a snacks. He walk 2 kilometers
east, 2 kilometers south, and 2 kilometers west. What distance did he
cover? What was the displacement?
The distance Oscar covered was 6km while the displacement was 2km.
What is Displacement?Displacement is defined as the vector whose length is the shortest
distance from the initial to the final position of a point M.
Distance = Total length of space between points
= 2km+ 2km+ 2km = 6km.
Displacement = 2km.
This is because it is the shortest distance from the positions in this
scenario.
Read more about Displacement here https://brainly.com/question/321442
5 uses of scandium and bismuth in the everyday life?
Answer:
below hun
Explanation:
Bismuth: cosmetics, alloys, fire extinguishers, and ammunition.
Scandium: bicycle frames, fishing rods, golf iron shafts, and baseball bats.
a pool and stops at the
Which best describes his
motion?
A. Linear
B. Projectile
C. Vibrational
In Linear motion the swimmer swims
Answer: A
Explanation: Linear motion.
A rocket sled accelerates from rest for a distance of 645 m at 16.0 m/s2. A parachute is then used to slow it down to a stop. If the parachute gives the sled an acceleration of -18.2 m/s2 and there is 500.0 m of sled track remaining after the shoot opens, will the sled stop before running off the track? Show why or why not?
Answer:
the stopping distance is greater than the free length of the track, the vehicle leaves the track before it can brake
Explanation:
This problem can be solved using the kinematics relations, let's start by finding the final velocity of the acceleration period
v² = v₀² + 2 a₁ x
indicate that the initial velocity is zero
v² = 2 a₁ x
let's calculate
v = [tex]\sqrt {2 \ 15.0 \ 645}[/tex]
v = 143.666 m / s
now for the second interval let's find the distance it takes to stop
v₂² = v² - 2 a₂ x₂
in this part the final velocity is zero (v₂ = 0)
0 = v² - 2 a₂ x₂
x₂ = v² / 2a₂
let's calculate
x₂ = [tex]\frac{ 143.666^2 }{2 \ 18.2}[/tex]
x₂ = 573 m
as the stopping distance is greater than the free length of the track, the vehicle leaves the track before it can brake
A barometer reads 780 mm Hg. Mercury has a density of 1.36 x 10^4 kg /m^3.
What is the pressure of the atmosphere in N / m^2?
A 1.1 x 10^4 N/m^2
B 1.1 x 10^5 N/m^2
C 1.1 x 10^7 N/m^2
D 1.1 x 10^8 N/m^2
How do we get to the answer? According to the mark scheme, it's B.
Answer:
B
Explanation:
Pressure = density × g × height
[tex]p \: = (1.36 \times {10}^{4} )(10)(780 \times {10}^{ - 3} ) \\ p = 1.1 \times {10}^{5} [/tex]
The pressure of the atmosphere, when a barometer reads 780 mm Hg. Mercury which a density of 1.36 x 10^4 kg /m^3 is B 1.1 x 10^5 N/m^2
This problem can be solved using the formula below
P = dgh................. Equation 1
Where P = Pressure of the atmosphere, d = density of the mercury, h = height of the mercury, g = acceleration due to gravity.
From the question,
Given: d = 1.36×10⁴ kg/m³, h = 780 mm = 0.78 m,
Constant: g = 10 m/s²
Substitute these values into equation 1
P = (1.36×10⁴)(10)(0.78)
P = 10.608×10⁴ N/m²
P ≈ 1.1×10⁵ N/m²
Hence the right answer is B. 1.1×10⁵ N/m²
Learn more about Pressure here: https://brainly.com/question/23603188
what is Newton's second law
Newton's Second Law of Motion states "The rate of change of momentum of a body is directly proportional to the applied unbalanced force in the direction of force".
A ball rolls off an 8.0 m high building and strikes the ground 5.0 m away from the base of the building. How fast was the ball rolling?
Answer: horizontal speed is 3.9 m/s
Explanation: when ball starts to drop, its vertical speed v0 is zero.
We can calculate dropping time from s = v0t +0.5gt².
Dropping time t= √(2s/g)= √((2·8.0 m)/9.81 m/s²)= 1.277 s
Because ball travels horizontal distance s= 5.0 m
HorizontalSpeed v = s/t = 5.0 m/1.277s= 3,915 m/s
in full sen
Explain the following concepts:
(b) communication
Answer:
Communication is simply the act of transferring information from one place, person or group to another. Every communication involves (at least) one sender, a message and a recipient. This may sound simple, but communication is actually a very complex subject
Which of the following is a true statement for a child's toy spinning in a circle at constant speed?
a) The speed is constant, the velocity is constant, and the angular velocity is constant. b) The speed is constant, the velocity is not constant, and the angular velocity is constant. c) The speed is constant, the velocity is not constant, and the angular velocity is not constant. d) The speed is constant, the velocity is constant, and the angular velocity is not constant.
explain your answer.
Answer:
B
Explanation:
I am pretty sure it is B as the speed is obviously constant but the velocity is not constant as it defines as the rate of speed AND DIRECTION meaning that it is not constant as it always changes direction. And angular velocity is constant.
What does the force of attraction called gravity act on?
A. every mass
B. no masses
C. nearby masses
D. select masses
Answer:
Every mass
Explanation:
Because Force of gravity always act toward the center of the earth , so when an object is thrown up ,the force of gravity will act in opposite direction of motion ,that's toward the center of earth. The force is towards the center of the Earth (more or less). which gives it time get touch every mass.
The gravitational force of attraction exists between every objects in the universe that are having mass. So, the correct option is A.
What is meant by the force of gravity ?Force of gravity is defined as the force of attraction experienced by bodies due to the gravitational field of earth.
Here,
The gravitational force is the attractive force experienced by any body that have mass. Gravity is an attractive force such that every bodies that are having mass in the earth are being attracted towards the centre of earth.
The equation of gravitational force is given by,
F = GMm/r²
where G is the gravitational constant of earth, M is the mass of earth and m is the mass of the body which is being attracted towards earth's centre, and r is the distance between earth and the body.
From the equation, it is shown that gravitational force is proportional to the masses. More the mass of the objects, more will be the gravitational force of attraction existing between them.
Hence,
The gravitational force of attraction exists between every objects in the universe that are having mass.
To learn more about force of gravity, click:
https://brainly.com/question/30498785
#SPJ3
In one cycle of any heat engine
A. the net work done is larger than the heat exhausted.
B. more heat flows from the engine than enters the engine.
C. The internal energy of the engine does not change.
D. the net heat flow is zero.
Answer:
D. the net heat flow is zero
Explanation:
In one cycle of any heat engine, three things happen:
Heat is added; this causes high temperature in the engine ([tex]Q_H[/tex])Some of the energy from that input heat is used to perform work (W). The rest of the heat is removed at a relatively cold temperature ([tex]Q_C[/tex]).[tex]Q_H = W + Q_C[/tex]
Conclusively, the net heat flow is zero
a car is travelling at 18m/s accelerates ti 30m/s in 3seconds. what's the acceleration of the car
[tex] \Large {\underline { \sf {Required \; Solution :}}}[/tex]
We have ―
Initial velocity, u = 18 m/sFinal velocity, v = 30 m/sTime taken, t = 3 secondsWe've been asked to calculate acceleration.
[tex]\qquad \implies\boxed{\red{\sf{ a = \dfrac{v-u}{t} }}}\\[/tex]
a denotes accelerationv denotes final velocityu denotes initial velocityt denotes time[tex] \twoheadrightarrow \quad \sf {a = \dfrac{30-18}{3} \; ms^{-2} } \\ [/tex]
[tex] \twoheadrightarrow \quad \sf {a =\cancel{ \dfrac{12}{3} \; ms^{-2} }} \\ [/tex]
[tex]\twoheadrightarrow \quad \boxed{\red{\sf{ a = 4 \; ms^{-2} }}}\\[/tex]
Therefore, acceleration of the car is 4 m/s².
The circuit is protected by a ground fault interrupter in the plug. The water in the tank is grounded. The two bare wires correspond to the two pins on the ground fault interrupter plug. If the __________ wire is touched to the water, the ground fault interrupter will disconnect the circuit. Select the best answer from the choices provided. View Available Hint(s) Select the best answer from the choices provided. Neutral Hot Ground
Answer:
Hot
Explanation:
GFI or GFCI This device protected from collecting the electric shocks arise from the faults in the electric devices that are used at home. It would be work by comparing the current on the input side that shows the hot side to the current on the outside side that shows the neutral side
In the case when hot wire give 120 VAC current source while on the other hand the neutral wire gives the return path that are given by the hot wire
Hence, the hot would be the answer
What is earth's magnetic field made of
Answer:
if you have a rotating electric current it will create a magnetic field on earth flowing of liquid metal in the outer core of the planets General Health recurrence the rotation of earth on its Axis causes this electric current to form a magnetic field which extends around the planet.
Explanation:. please give me brainlest
what is the power output needed from a motor to lift in the absence of friction a mass of 1.5 ×10⁴ kg 25 m in 6.0 s at constant speed
Answer:
the power output needed is 61.25 × 10⁴
Explanation:
The computation of the power output needed is shown below;
Given that
m = 1.5 ×10⁴ kg
v = 25m ÷ 6.0 s
And g = 9.8 m/sec^2
Now based on the above information
p = f × v
= mg × v
= 1.5 ×10⁴ × 9.8 × 25 ÷ 6
= 61.25 × 10⁴
Hence, the power output needed is 61.25 × 10⁴
PLEASE HELP ME WITH THIS
Answer:
Air masses tend to move from west to east.
explain the working and performance of a centrifugal clutch with a sketch
a centrifugal clutch works, as the name suggests, through centrifugal force. ... The rotation of the hub forces the shoes or flyweights outwards until they come into contact with the clutch drum, the friction material transmits the torque from the flyweights to the drum. The drive is then connected