The universe is larger than can be directly measured. Which of the following are most common in the universe?
A. galaxies
B. solar systems
C. black holes
D. quasars

Answers

Answer 1
A galaxies because it is the most common

Related Questions

If a running system has a total change in the heat of 315 joules, and it is running at a temperature of 350 K, what is the entropy? Α.1.54 joules/kelvin B.0.847 joules/kelvin C.1.22 joules/kelvin D. 0.900 joules/kelvin E. 0.762 joules/kelvin​

Answers

Answer:

0.900

Explanation:

joules" (and any subsequent words) was ignored because we limit queries to 32 words.

Answer:

See image

Explanation:

Plato

Question 7 of 10
What is kinetic friction?
A. Friction that acts when an object is not moving
B. Friction that opposes air resistance
C. Friction that exerts no force
D. Friction that acts on a sliding object
SUBMIT

Answers

Kinetic friction (also referred to as dynamic friction) is the force that resists the relative movement of the surfaces once they're in motion.
https://www.khanacademy.org › stat...
Static and kinetic friction example (video) | Khan Academy

Answer a would be static friction
Answer b is fluid friction
(Air resistance is fluid friction. Fluid friction is the friction experienced by objects which are moving in a fluid and the air is a fluid.)
Answer c is static friction
ANSWER D IS KINETIC FRICTION

Hope this helps :D



Answer: Friction that acts on a sliding object

Explanation:

name of impurities present in zinc plate used in simple cell.​

Answers

Mercury is present in zinc plate which is used in simple cell

a microwave with a frequency of 5.0 x 10^10 hertz has a period of

Answers

Answer:

A microwave with a frequency of 5*10¹⁰ hertz has a period of 2*10⁻¹¹ seconds.

Explanation:

Frequency is the number of vibrations that occur in a unit of time. Its unit is s⁻¹ or hertz (Hz).

The period is the time that elapses between the emission of two consecutive waves. In other words, it is the time it takes for a complete wave to pass a reference point. The period (T) is simply the inverse of the frequency (f):

[tex]T=\frac{1}{f}[/tex]

In this case, f=5*10¹⁰ Hz. So, replacing in the definition of period T:

[tex]T=\frac{1}{5*10^{10} Hz }[/tex]

Solving:

T= 2*10⁻¹¹ seconds

A microwave with a frequency of 5*10¹⁰ hertz has a period of 2*10⁻¹¹ seconds.

A microwave with a frequency of 5*10¹⁰ hertz has a period of 2*10⁻¹¹ seconds.

What is fequency?

The fequency is defined as the number of cycles achieved by the any wave it is expressed in hertz.

Frequency is the number of vibrations that occur in a unit of time. Its unit is s⁻¹ or hertz (Hz).

The period is the time that elapses between the emission of two consecutive waves. In other words, it is the time it takes for a complete wave to pass a reference point. The period (T) is simply the inverse of the frequency (f):

[tex]T=\dfrac{1}{f}[/tex]

In this case, f=5*10¹⁰ Hz. So, replacing in the definition of period T:

[tex]T=\dfrac{1}{5\times 10^{10}}=2\times 10^{-11}\ Sec[/tex]

A microwave with a frequency of 5*10¹⁰ hertz has a period of 2*10⁻¹¹ seconds.

Thus a microwave with a frequency of 5*10¹⁰ hertz has a period of 2*10⁻¹¹ seconds.

To know more about Frequency follow

https://brainly.com/question/25699025

transparent materials allow electromagnetic waves to be while trapping thermal energy

1. transmitted
2. reflected
3. absorbed

Answers

Answer:

2. reflected

hope it is helpful to you

1. A 110.0 g sample of metal is warmed 10.0 °C when 70.0 calories is added. What is the specific heat of this metal?

2. How much heat must be supplied to a 550.0 g aluminum pan to raise the temperature of the pan from 14.0°C to 108.0 °C?

Answers

Answer:

1. The specific heat of the meatal is approximately 0.266 J/(g·°C)

2. 46.6334 kJ

Explanation:

1. The given mass of the sample of metal, m = 110.0 g

The temperature change of the metal when heat is added, ΔT = 10.0°C

The amount of head that was added, ΔH = 70.0 Calories = 292.88 Joules

The formula for heat heat capacity of a material is given as follows

Q = m × c × ΔT

Where;

Q = The quantity of heat added = 292.88 Joules

m = The mass of the material = 110.0 g

ΔT =  The temperature change = 10.0°C

c = The specific heat capacity of the material

We get;

c = ΔH/(m × ΔT)

Which gives;

c = 292.88 J/(110.0 g × 10.0°C) ≈ 0.266 J/(g·°C)

2. The given mass of aluminum, m = 550.0 g

The initial temperature of the aluminum, T₁ = 14.0°C

The final temperature of the aluminum, T₂ = 108.0°C

The specific heat of aluminum, c = 0.902 J/(g·°C)

We get;

Q = m × c × (T₂ - T₁)

Q = 550.0 g × 0.902 J/(g·°C) × (108.0°C - 14.0°C) = 46,633.4 joules = 46.6334 kJ

The heat that must be supplied to 550.0 g of aluminum pan to raise the temperature of the pan from 14.0°C to 108.0°C, Q = 46.6334 kJ.

Can some one help me with this question its hard :( down below ill give brainliest

Answers

I’m pretty sure it’s c sorry if I’m wrong

Imagine that a 1200 kg vehicle speeds up from rest to 20.0 m/s in 80 m.
How much work was done on the car? (Answer in 3 sig figs)

Answers

Correct question:

Imagine that a 1200 kg vehicle speeds up from rest to 20.0 m/s in 80 s.

How much work was done on the car? (Answer in 3 sig figs)

Answer:

the work done on the vehicle is 2.40 x 10⁵ J

Explanation:

Given;

mass of the vehicle, m = 1200 kg

initial velocity of the vehicle, u = 0

final velocity of the vehicle, v = 20 m/s

time of motion of the vehicle, t = 80 s

The distance moved by the vehicle is calculated as;

[tex]s = (\frac{v + u}{2} )t\\\\s = (\frac{20+ 0}{2} )(80)\\\\s = 800 \ m[/tex]

The force applied to the vehicle is calculated as;

[tex]F = ma = \frac{m v}{t} = \frac{1200 \times 20}{80} = 300 \ N\\\\[/tex]

The work done on the vehicle is calculated as;

W = F x d

W = 300 x 800

W = 2.4 x 10⁵ J.

Therefore, the work done on the vehicle is 2.40 x 10⁵ J

What is the speed of a wave with a frequency of 6 Hz and a wavelength of 12 m? No links

Answers

72 m/s

Explanation:

Given,

Frequency ( f ) = 6 Hz

Wavelength ( λ ) = 12 m

To find : -

Speed ( v ) = ?

Formula : -

v = f x λ

v

= 6 x 12

= 72 m/s

Therefore,

the speed of a wave with a frequency of 6 Hz and a wavelength of 12 m is 72 m/s.

if you have any questions, let me know​

Answers

Answer:

The red car would experience the greatest acceleration.

Explanation:

Newton says that Force equals mass times acceleration or F = ma

We get a = F/m

If we want the greatest acceleration or a, mass or m must be the lowest.

The _____is a measure of the number of waves that pass a point in a given amount of time

Answers

The answer is frequency
Answer: wave frequency

Two resistors, R 1 and R 2 , are connected in parallel. R 2 =221.0 ohms, and the equivalent resistance of the combination is 120.7 ohms. What is the value of R 1 ? (Unit = ohm)

Answers

Answer:

Explanation:

When resistors are connected in parallel combination, then equivalent resistance is given by,

[tex] \to \quad \bf{ \dfrac{1}{R_1} + \dfrac{1}{R_2} =\dfrac{1}{R_p}}[/tex]

Inserting values,

[tex] \to \quad \bf { \dfrac{1}{R_1} + \dfrac{1}{R_2} =\dfrac{1}{R_p} } \\ \\ \to \quad \bf { \dfrac{1}{R_1} + \dfrac{1}{221} =\dfrac{1}{120.7} } \\ \\ \to \quad \bf { \dfrac{221+R_1}{(R_1)(221)} =\dfrac{1}{120.7} } \\ \\ \to \quad \bf { \dfrac{221+R_1}{221R_1} =\dfrac{1}{120.7} } \\ \\ \to \quad \bf { 120.7(221+R_1) = 221R_1(1)} \\ \\ \to \quad \bf { 26674.7 + 120.7R_1= 221R_1} \\ \\ \to \quad \bf { 26674.7= 221R_1- 120.7R_1} \\ \\ \to \quad \bf { 26674.7 = 100.3R_1} \\ \\ \to \quad \bf { \dfrac{26674.7 }{100.3} =R_1} \\ \\ \to \quad\underline{\boxed{ \bf { 265.9 \; \Omega=R_1}}} \\ [/tex]

help please, it’s on my physics paper!

Answers

Answer:

15.4

Explanation:

770x14% = 107.8

rearrange f =kx to get k (constant)

k = f/x

x is the distance stretched , so 42 - 35 =7

so 107.8/7 =15.4

can someone double check

Answer:

k = 44000 N/m is the answer.

Explanation:

Gravitational Potential Energy = 770J

Elastic Potential Energy = 14% of 770J

= 14/100 × 770

= 107.8J

Extension (x) = 42 - 35 = 7cm = 7 × 10⁻²m

To find the spring constant (k)

Elastic Potential Energy Formula:

[tex]U = \frac{1}{2}kx^2[/tex]

107.8 = 1/2 × k × (7 × 10⁻²)²

215.6 = 0.0049 × k

k = 215.6/0.0049

k = 44000 N/m

A car moving with a speed of 20 m/s
applies brakes. What is the acceleration
of the car?​

Answers

Explanation:

[tex]speed : U = 20 \: m {s}^{ - 1} \\ {V}^{2} = {U}^{2} + 2aS \\ 0 = {20}^{2} + (2 \times a \times S) \\ a = \frac{200}{S} \: m {s}^{ - 1} [/tex]

What process is represented by this redox equation ? 6H 2 O+6CO 2 C 6 H 12 O 6 +6O 2

Answers

Answer:

C. Photosynthesis

Explanation:

Photosynthesis is a process by which plants and photosynthetic bacteria obtain their food in presence of sunlight from water and carbon dioxide. They produce glucose as the food and oxygen is emitted as the byproduct. The equation for photosynthesis is - 6H2O+6CO2 → C6H12O6 + 6O2

Thus, the correct answer is 'C.Photosynthesis.'

What information is represented by the slope of a graph of displacement versus time (displacement-time graph)?​

Answers

C - velocity

When you look at a point it is saying it goes this many meters in this amount of time. This is speed which means the slope is velocity

A bicycle with a mass of 100kg hit a wall at an acceleration of 4 m/s2, what is the force?

Answers

Answer:

400N

Explanation:

F= ma

F= 100 x 4

F= 400N

Determine the mass of fuel required for the expected energy consumption in the United States for the next 10 years:

Provide the energy use per person per year in the United States = 3.5 × 1011 joules.
Base your calculations on a current population of 310,000,000.

Answers

Answer:

(This will depend on the type of fuel, I will assume that the fuel is petrol)

First, let's find the expected energy consumption in the US for the next 10 years.

We know that in one year, a person consumes 3.5*10^11 joules.

There are 310,000,00 people on the US

Then the total consumption in one year is:

310,000,000*3.5*10^11 joules = 1.085*10^20 J

In 10 years the consumption is 10 times the consumption of a single year, then the expected energy consumption in the US for the next 10 years is:

10*1.085*10^20 J = 1.085*10^21 J

Now let's find the mass of fuel required.

We know that a liter of petrol has 31,536,000 joules of energy,

And a liter of petrol weights 0.75 kg

To find the number of liters of petrol that we need, we need to find the quotient between the expected energy consumption in the next 10 years and the energy of a single liter of petrol, this is:

N = (1.085*10^20 J)/(31,536,000 j) = 3.44*10^13

We will need  3.44*10^13 liters of petrol.

And the total mass of petrol will be:

M = 3.44*10^13*0.75 kg = 2.58*10^13 kg of fuel.

what is a material used to reduce or prevent the transfer of electricity, heat, or sound ?

Answers

Answer:

The material you're looking for is insulation.

Explanation:

It reduces and/or stops electricity waves, heat waves, and sound waves from going past.


What is the frequency of a wave with a speed of 45 m/s and
a wavelength of 2.5 m?

Answers

Answer:

f=s/w

f=45/2.5=18

s means speed which is in m/s while w is wavelength which is Lamda

Use the image above to answer the following for 2 points each:

1. Identify a point in the diagram where a divergent boundary is occurring and explain how it is interacting with the rock cycle.

2. Identify a point in the diagram where a divergent boundary is occurring and explain how it is interacting with the rock cycle.

3. Identify a point in the diagram where the rock cycle is occurring without a plate boundary and how it is interacting with the rock cycle.

Answers

Answer: the divergent one goes where it looks like there a crack because when you think about divergent it means dividing like seperating.(igneous rock) is where the divegent one goes.

the one that is no plate boundary is sedimentary rock and it occurs by because there is nothing there for it todo there

Explanation:

1.) A ball is thrown horizontally from the top of a building. What is the vertical velocity of the ball after 1 second?

A. 0 m/s
B. 9.8 m/s
C. 4.9 m/s
D. 19.6 m/s

2.) This is a required question
What is the horizontal acceleration of a projectile?

A. 0 m/s2
B. 8.9 m/s2
C. 4.9 m/s2
D. 9.8 m/s2

3.) If air resistance is neglected, at what angle a projectile must be projected to attain the maximum range?

A. 40
B. 75
C. 45
D. 90

4.) Neglecting air resistance, the range of a projectile projected at an angle of 20 degrees is the same as that of _______ if they were released with the same velocity.

A. 50
B. 70
C. 60
D. 80

5.) What do you call the motion of an object with constant acceleration?

A. circular motion
B. uniform motion
C. constant motion
D. uniformly accelerated motion


CAN SOMEONE PLEASE HELP ASAP. THANK U

Answers

9.8zero 4570Uniform accelerated motion

Explanation:

Q.1 - V = u + at

u = 0, a = g = 9.8, t = 1

V = 0+9.8*1 = 9.8 m/s

Q 2- In horizontal position the velocity remains same hence a= dv/t, since change in velocity is zero the acceleration also equal to zero

Q.3- After neglecting the air resistance at 45° angle the maximum range is obtained.

let's prove, consider the range have maximum angle at θ, now range is given by

R = u²Sin2θ/g where sin2θ can we written as 2sinθ.cosθ.

Now the range value is directly proportional to the product of sin & cos of firing angle & this maximum value is obtained at 45°

Q.4 The range of two angle will be same if and only if they give 90° on addition.

20+x = 90,

x = 90-20 = 70°

Q.5 The motion with constant acceleration is known as uniformly accelerated motion.

Thanks for joining brainly community!

Answer:

B. 9.8 m/sA. 0 m/C. 45°B. 70°D. uniformly accelerated motion

Explanation:

1.

u=0m/s

v=?

a=9.8m/s²

t=1sec

now

we have

v=u+at

v=0+9.8*1

v=9.8m/s

3.

angle is measured in sin and cos angle where maximum angle's value is gained by 45°

4.

we have

range

R=[tex]\frac{u²sin2\theta}{g}[/tex]

For

angle =20°

R1=[tex]\frac{u²sin2*20}{g}[/tex].......[1]

another angle be [tex]\theta[/tex]

R2=[tex]\frac{u²sin2\theta}{g}[/tex].......[2]

since R1=R2

By comparing we get

Sin40=Sin([tex]2\theta[/tex])

Sin(180-40)=Sin([tex]2\theta[/tex])

we

140=[tex]2\theta[/tex]

[tex]\theta[/tex]=70°

I would assume its A. or B.

Answers

Answer:

B

Explanation:

remember that you are looking for the value of the graph

to take into account or value a lot: prize, estimate to value your opinion. 2nd: estimate or assign the monetary value of: appraise a necklace. b: qualify or scale in utility, importance or general value: evaluate. value.

According to the law of conservation of momentum, in a(n) _______ system, the initial total momentum before a collision equals the final total momentum.​

Answers

Answer:

rhastuutse5r says he n and happiness of

Explanation:

UKDIAMOND is a great place to live and live and live in the world best friend tum jio hjaro and happiness of the day and the day of the day of the day of the day of the day of the day of 2nd century and the day of the day of

Answer:

Isolated

Explanation:

According to the law of conservation of momentum, in a(n) isolated system, the initial total momentum before a collision equals the final total momentum. I just did it on A p e x.

over due by alot please help

Answers

Answer:

i would say the third one

Explanation:

may i be brainliest?

Can someone write a 200 speech that explains the difference between analog and digital waves and which one is better?

Answers

Answer:

Analog and digital signals are the types of signals carrying information. The major difference between both signals is that the analog signals have continuous electrical signals, while digital signals have non-continuous electrical signals.

Explanation:

Analog Signals   were used in many systems to produce signals to carry information.  These signals are continuous in both values and time. The use of analog signals has been declined with the arrival of digital signals. In short, to understand the analog signals –  all signals that are natural or come naturally are analog signals.  Digital Signals , unlike analog signals, digital signals are not continuous, but signals are discrete in value and time. These signals are represented by binary numbers and consist of different voltage values.  Their differences are as follows:

Analog Signals                                      Digital Signals

Continuous signals                               Discrete signals

Represented by sine waves               Represented by square waves

The Human voice, natural sound, analog electronic devices are few examples   Computers, optical drives, and other electronic devices

A Continuous range of values            Discontinuous values

Records sound waves as they are     Converts into a binary waveform.

Only be used in analog devices.        Suited for digital electronics like computers, mobiles, and more.

I think a Digital signal is better.

What charge does an object have if it has an excess of electrons?

Answers

Answer:

negative charge

Explanation:

On an atomic scale, those are called "ions", and negatively charged ions are called anions.

Chang wants to build a circuit that will light up the bulb from a flashlight. Which component could Chang leave out and still light up the bulb? the switch the battery the wire the light bulb

Answers

We could choose to leave out the switch and simply join the wires together and the bulb will still light up.

What is a circuit?

A circuit is defined as pathway that has been designed for the flow of current. Now we know that a circuit must have a battery, connecting wires and the bulb itself.

However, we could choose to leave out the switch and simply join the wires together and the bulb will still light up.

Learn more about circuit: https://brainly.com/question/365923

A nucleus splits to form two or more smaller nuclei during which process?
A. Positron emission
B. Nuclear fission
C. Nuclear fusion
O D. Gamma decay

Answers

Answer:

nuclear fission

When the net force acts at right angles to an object’s motion, what does it do to the object’s motion?
a. it changes the object’s speed
b. it changes the object’s direction
c. it changes both the speed and direction of the object’s motion.

Answers

Answer:

B. It changes the objects direction

Other Questions
PLEASE HELP THIS IS VERY IMPORTANT I'LL GIVE YOU BRAIN THING IF ITS CORRECT!! PLS HELP 50 POINTSA rectangular prism has a surface area of 8 square feet. A similar rectangular prism has a surface area of 200 square feet. How many times larger is the surface area of the larger prism?25625105 I need an Answer Immediately,pls!!!!!! There are 14 horses and 56 camels at the stable. What fraction of animals in the stable are horses? * change into indirect sentence..help needed please Using the following words, explain the difference betweenDNA and RNA.Nucleus, uracil, double helix plz i need this Explain why Muslims found it fairly easy to expand their empire throughout the East. Why did non-Christians in the East view the Muslims as liberators? This is a last question can anybody answer this plz Jacques lives in Chicago and runs a business that sells pianos. In an average year, he receives $701,000 from selling pianos. Of this sales revenue, he must pay the manufacturer a wholesale cost of $420,000; he also pays wages and utility bills totaling $247,000. He owns his showroom; if he chooses to rent it out, he will receive $9,000 in rent per year. Assume that the value of this showroom does not depreciate over the year. Also, if Jacques does not operate this piano business, he can work as a financial advisor, receive an annual salary of $32,000 with no additional monetary costs, and rent out his showroom at the $9,000 per year rate. No other costs are incurred in running this piano business.What are Raphael's explicit costs of selling pianos?1) The salary Raphael could earn if he worked in an accounting firm.2) The wages and utilty bills that Raphael pays.3) The wholesale cost for pianos that Raphael pays the manufacturer.4) The rental income Raphael could receive per year if he chose to rent his showroom out. Which of the following is the solution to the quadratic equation x2 + 6x + 8 = 0?A)x = 4,-2 B)x= -4,2C)X = 4,2 D)X=-4, -2 Please I need this before 11:59am its for my final test: Balance the equation *COMPLETE WITH PROCEDURE* Janet graphed a triangle on the coordinate grid shown. rewrite sentence ofa). I am studentB). He does not eat meatC). they are going to school D) we do not sing English songs which of the follwing is not a way to describe a direction?A left B upC southD Fast QUICK PLEASE HELP REAL ANSWER NO FILE. Part AElectricity generated from any source comes with its own advantages anddisadvantages. So, no source of energy for generating electricity is perfect. However,imagine that there is an energy source that perfectly meets the needs of society.Describe this ideal source of energy. Include relevant factors such as cost, supply, safety,reliability, and environmental impact What are some causes of water pollution? If you were looking to invest in a mutual fund with strong growth, what type of mutual fundwould you invest in?A. An equity fundB. A balanced fundC. A fixed income fundD. A money market fund The maximum allowable resistance for an underwater cable is one hundredth of an ohm permeter and the resistivity of copper is 1.54 x 10-80m.a) Calculate the smallest cross sectional area of copper cable that could be used. PLS ANSWER QUICKLY Communication can take the form of: A.Spoken/verbal, non-verbal, electronic, written B.Spoken/verbal, non-verbal, written, visuals C.Effective, verbal, non-verbal, electronic D.Effective, ineffective, verbal, written Regarding the war between Mexico and the United States, what was the role of the AmericanPresident James Polk?