Answer:
Explanation:
Nitrate of most of the elements are water soluble . Aluminium nitrate is also one of them . Aluminium nitrate is easily dissolved in water . It forms hydrated salt whose formula is as follows
Al( NO₃ )₃ . 9H₂O
It is a white crystalline salt . It is also soluble in alcohol.
If the external vapor pressure is 2.0 atm , what is the vapor pressure of the water at its boiling point?
Answer:
22
Explanation:
22
What is the unit charge on each subatomic particles
Answer:
Protons, Electrons, Neutrons
Explanation:
Neutron: 0 or Neutral
Electron: -1 or Negative
Proton: +1 or Positive
For proton and neutron look at neutr for neutral and p for positive
Answer:
❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️
The answer is Protons, Electrons, Neutrons
There is three of them.....
Hope this will help you
❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️
Explanation:
25. Which answer best describes the continental rise? area of land that drops toward deep ocean basins 75 mile shallow flat area just off coastlines thick deposits of sediments carried off of the shelf the surf area along coastlines
Answer:
Thick deposits of sediments carried off of the shelf
Explanation:
The continental rise is a thick deposit of sediments that accumulate between the continental slope and the abyssal plain
A is wrong. The area of land that drops toward the deep ocean basins is the continental slope.
B is wrong. The 75-mile shallow flat area just off coastlines is the continental shelf.
D is wrong. The surf area along coastlines is the surf zone .
How would you measure the mass and weight of an object?
Answer:
Weight = mass × earth's gravitational acceleration
Explanation:
Follow the following steps to measure the mass and weight of an object:
Measure the mass of the object using an accurate measuring scale.Multiply the mass of that object with earth's gravitational acceleration which is approximately 9.8 N/kgWhich statement accurately describes a light-year
Answer:
B. distance light travels in a year
got it on edge :)
The statement which accurately and best describes a light-year is the total distance which light travels in a complete year
What is velocity of light?Velocity of light can simply be defined as that fundamental constant that represents the speed of electromagnetic radiation in a vacuum.
The velocity of light = 2.9979 × 10^10cm/s
So therefore, the statement which accurately and best describes a light-year is the distance which light travels in a complete year
Learn more about light-year:
https://brainly.com/question/1224192
#SPJ2
What happens to water 100°C as pressure is increased from 0.7 atm to 1.4 atm
Answer:
Explanation:
The graph shows the phase diagram of water . From it , it is clear that at 100°C water remains in equilibrium with water vapour and at this temperature , the vapour pressure is equal to one atm . So this must be boiling point of water.
At 0.7 atm pressure , boiling point must have been reduced . So when water is at 100°C , it must have been completely in vapour phase .
Now the pressure is increased to 1.4 atm . In this process of increase of pressure , the water in vapour state must have turned into liquid state as soon as the pressure increases beyond 1 atm . Beyond it its boiling point would have increased above 100°C so it can not remain in gaseous phase . At 1.4 atm , its boiling point would have increased to 110°C or so . Hence it must be in liquid phase because its temperature is below its boiling point at that pressure .
Hence water changes from gaseous phase to liquid phase when pressure changes from 0.7atm to 1.4 atm .
MARKING BRAINLIEST!! - Chlorine reacts with methane to form gaseous hydrogen chloride and chloromethane according to the following equation: Cl2 (g) + CH4 (g) → HCl (g) + CH3Cl (g) If 100 mL of chlorine reacted with excess methane at constant pressure and temperature, what volume of chloromethane would be formed? Question 7 options: 50, cannot tell from the information provided, 200, 100
Answer:
100mL of chloromethane
Explanation:
Based on the equation:
Cl₂(g) + CH₄(g) → HCl(g) + CH₃Cl(g)
1 mole of chlorine reacts per mole of methane to produce 1 mole of HCl and 1 mole of chloromethane
Avogadro's law says that equal volumes of all gases, at the same temperature and pressure, have the same number of molecules. Using Avogadro's law we can say of the equation that:
1 mL of chlorine reacts per mL of methane to produce 1 mL of HCl and 1 mL of chloromethane
Because the system stays under constant pressure and temperature.
As 100mL of Cl₂ reacts with excess of CH₄ and 1mL of Cl₂ produce 1mL of CH₃Cl there are produced:
100mL of chloromethaneWhat is the molarity of 0.25 moles of FeCl3 dissolved in 120 ml of solution?
Answer:
Molarity = 2.0833 M (Approx)
Explanation:
Given:
Number of moles (n) = 0.25
Volume of solution = 120 ml = 0.12 L
Find:
Molarity
Computation:
Molarity = Number of moles (n) / Volume of solution.
Molarity = 0.25 / 0.12
Molarity = 2.0833 M (Approx)
Plz solve mcqs#04 with full detailed.note
Answer:
The correct option is;
(B) 1 s², 2s², 2p⁶, 3s², 3p³
Explanation:
The electron configuration is the outline of the electron arrangement about a nucleus
In the systemic pattern of electron arrangement within an atom, there are, s, p, d, f orbitals
The maximum number of electrons in an s, p and d orbital = 2, 6, and 10 respectively
Based on Aufbau's principle the electrons are arranged based on the order of their energy level
The charge is presented by the number of electrons in the outermost shell, an element able to form an ion of charge of -3 will gain 3 electrons to complete its outermost shell
Among the options given, option B is the only option that has the capacity to take the electrons to complete the number of electrons in the p orbital outermost shell to 6 from 3, that is 3p³ + 3e⁻→ 3p⁶.
An antacid tablet has a pH of about 9.5 which
means it is considered to be in the _____
range.
Acidic or basic
Answer:
Basic
Explanation:
The pH scale is a scale that tells us about the concentration of hydrogen ions in a solution.
Acids have many hydrogen ions. Acids have a pH of less than 7.
Bases have fewer hydrogen ions and more hydroxide ions. Bases have a pH of less than 14.
If the solution has a pH of exactly 7, then it is pure water. Water has the same concentration of hydrogen and hydroxide ions.
The antacid tablet has a pH of roughly 9.5 Since this is less than 14, but not equal to or less than 7, this must be an base. Therefore, it is considered to be in the basic range.
Answer:
9.5 is a base
Explanation:
A ph of less than 7 is an acid
7 is neutral
7 to 14 is a base
9.5 is a base
A stone bead and an iron bead are dropped into a cup of water. They both sink to the bottom of the cup. What can be said about these beads?Immersive Reader
Answer:
Both have densities greater than that of water
Explanation:
The ability of objects to either float or sink in a liquid depends on their relative densities.
If an object is denser than a liquid it will completely sink in it, but if the density of the object is less than that of the liquid, it will sink until the weight of liquid displaced is equal to the weight of the object, then it will finally float in that liquid.
In the case of the stone bead and iron beads dropped into a cup of water, hey both sank to the bottom because they are denser than water.
For the α anomer of a D-sugar, the anomeric hydroxyl in a Haworth projection Group of answer choices has an upward projection (on the same side as the terminal CH2OH group). has a downward projection (on the opposite side from the terminal CH2OH group).
Answer:
The answer is "choice 2".
Explanation:
Its glycosidic fruit juice facility would be a chromosomal hydrogen bond and an aldehyde (or acetone) team generated from the intramolecular creation of the acetals (or ketal).
Its two heterocycles created at the anomeric core from of the 2 potential stereochemical are named anomers, that's why choice "has a downward projection (from terminal CH2OH party on the opposite side)" is correct.
You combine 13 g of magnesium with 5 g of nitrogen to form a compound.
What is the mass percent of nitrogen in the compound?
Answer:
[tex]\large \boxed{28 \, \% }[/tex]
Explanation:
magnesium + nitrogen ⟶ Product
13 g 5 g
Mass of product = 13 g + 5 g = 18 g
The product contains 5 g of nitrogen .
[tex]\text{Percent N} = \dfrac{\text{5 g}}{\text{18 g}} \times \, 100\% = \mathbf{28 \, \%}\\\text{The percent by mass of nitrogen is $\large \boxed{\mathbf{28 \, \% }}$}[/tex]
As defined by Aristotle, which one of the following is an element?
1. water 2. air 3. soil 4. none of them
Answer:
4
Explanation:
none of them
they are compounds and mixtures
Answer:
4. none of them
Explanation:
Water is a compound.
Air is a mixture.
Soil is a mixture.
None of them are elements.
how many different d orbits are within the 3d sublevel
Answer:
Its 5
Explanation:
You are given a mixture of sand, sugar and sulphur. Give the method you will use to separate the three constituents. ___________
Answer:
1:put these in sneaker and add water since sulphur is insoluble and the sugar will dissolve and the sand will settle obtain the sulphur
2:filter the mixture of sand and sugar solution to obtain the sand as residue and solution as filtrate
3:using an evaporating dish evaporate sugar solution to saturation not dryness to get crystals.
To make a table of elements, dmitri
The question is incomplete, the complete question is;
To make a table of the elements, dimitri Mendeleev sorted the elements according to their?
Answer:
Atomic weights
Explanation:
Dimitri Medeleeve is a Russian scientist who worked assiduously on the project of developing a system of classifying all the elements. His periodic table was filled with spaces as many atoms weren't yet discovered. 'Eka' prefix was used to name some elements whose properties closely resembled that of their predecessors in Mendeleev's system of classification.
The dependence of the atomic properties on the weight of the atom was the basis for Mendeleeves' original classification. According to Medeleeve, elements having similar chemical properties are also expected to have similar atomic weights and their atomic weights was found to increase regularly.
The Mendeleeve concept of periodic arrangement of elements is the closest precursor of the modern periodic table as it is used in chemistry. Mendeleev arranged the elements in order of increasing relative atomic mass .
PLEASE HELP A woman travels to Canada where milk is sold in liters. She wants to buy enough milk at the grocery store to last 5 days and she knows at home she uses 0.75 gallons per week. How many liters must she buy?
Answer:
About 2 liters
Explanation:
Since 1 gallon equals 3.785 liters, you figure out how many liters per week she uses by 3.785 x 0.75 which is 2.83875. Then divide that by 7 which is 0.405535 liters per day. Then multiply that by 5 days which is 2.027 liters in 5 days.
Name the hydro carbon.... I really need your help guyz
Answer:
The given hydrocarbon is Butanol
How many moles of ZnCl2 will be produced from 61.0 g of Zn, assuming HCl is excess?
Answer: 0.938 moles of [tex]ZnCl_2[/tex] will be produced.
Explanation:
To calculate the moles, we use the equation:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text {Molar mass}}[/tex]
moles of zinc:
[tex]\text{Number of moles}=\frac{61.0g}{65g/mol}=0.938moles[/tex]
[tex]Zn+2HCl\rightarrow ZnCl_2+H_2[/tex]
As HCl is in excess , zinc is the limiting reagent and it limits the formation of product.
According to stoichiometry :
1 mole of Zn produce = 1 mole of [tex]ZnCl_2[/tex]
Thus moles of Zn produce = [tex]\frac{1}{1}\times 0.938=0.938[/tex] moles of [tex]ZnCl_2[/tex]
Thus 0.938 moles of [tex]ZnCl_2[/tex] will be produced.
how many moles are in 8.5 x 10^25 molecules of CO2
Answer:
the answer is 5.1 1049 mol.
The activation energy (E*) for 2N2O ---> 2N2 + O2 is 250 KJ. If the k for this reaction is 0.380/M at 1001oK, what will k be at 298oK? What will the half-life be at both temperatures?
Answer:
Explanation:
GIven that:
The activation energy = 250 kJ
k₁ = 0.380 /M
k₂ = ???
Initial temperature [tex]T_1 =[/tex] 1001 K
Final temperature [tex]T_2 =[/tex] 298 K
Applying the equation of Arrhenius theory.
[tex]In \dfrac{k_2}{k_1 }= \dfrac{Ea}{R}( \dfrac{1}{T_1 }- \dfrac{1}{T_2})[/tex]
where ;
R gas constant = 8.314 J/K/mol
[tex]In \dfrac{k_2}{0.380 }= \dfrac{250 * 10^3}{8,314}( \dfrac{1}{1001 }- \dfrac{1}{298})[/tex]
[tex]In \dfrac{k_2}{0.380 }= -70.8655[/tex]
[tex]\dfrac{k_2}{0.380 }= e^{-70.8655}[/tex]
[tex]\dfrac{k_2}{0.380 }= 1.67303256 \times 10^{-31}[/tex]
[tex]{k_2}= 1.67303256 \times 10^{-31} \times {0.380 }[/tex]
[tex]{k_2}= 6.3575 \times 10^{-32}[/tex] /M .sec
Half life:
At 1001 K.
[tex]t_{1/2} = \dfrac{In_2}{k_1}[/tex]
[tex]t_{1/2} = \dfrac{0.693}{0.38}[/tex]
[tex]t_{1/2} =[/tex] 1.82368 secc
At 298 K:
[tex]t_{1/2} = \dfrac{0.693}{6.3575 \times 10^{-32}}[/tex]
[tex]t_{1/2} =1.09 \times 10^{31} \ sec[/tex]
Which quantity can be calculated using the equation E=MC^2
Answer:
The energy needed to split an atom into separate protons, neutrons, and electrons
Explanation:
The equation E = MC^2 is developed by Einstein’s Special Relativity Theory
where,
E = Energy
M = mass
C = speed of the light
The energy should be measured in Joules i.e J
The mass should be measured in Kilogram i.e Kg
And, the speed of the light should be measured in meters per second i.e ms-1
The C should be squared
Now the energy is required to divided into three particles i.e protons, electrons and neutrons
It also needs to allocate the nucleus into distinct protons and neutrons that we called binding energy of nuclear
And if the energy is required to take off an electron from an atom we called the energy of ionization
And if the energy is required to add an electron to an atom so we called it affinity of electron
Which of the following is the best explanation for why it is important to follow lab safety guidelines
a. Following laboratory safety guidelines prevents all lab accidents.
b. Following laboratory safety guidelines minimizes the chance of lab ac
C. Following laboratory safety guidelines prevents fires.
d. Following laboratory safety guidelines allows quick response during la
Please select the best answer from the choices provided
Answer:
B
Explanation:
The main aim of lab rules is to minimize the no of accidents
Help me pls!
What is heliuim?
Answer:
it's a chemical Element
Explanation:
symbol He
atomic number 2.
The fact that a heat pump requires energy to move heat from a colder object (the outside of a house) to a hotter object (the inside of the house) is a real life observation of which thermodynamic law?
Answer:
The correct answer is - the second law of thermodynamics.
Explanation:
The second law of thermodynamics says that the in all heat energy exchange or transfer, and if there is no gain or lose of energy in a system, the potential energy of the particular state in that system will less than that of initial state of the system in any case.
It also suggests that the processes deals with the conversion of the heat energy are irreversible and the energy can be transfer from lower temperature system to higher temperate system without adding energy.
Thus, The fact that a heat pump requires energy to move heat from a colder object to a hotter object is a real life example of the second law of thermodynamics.
Easyyyyy plz ...................
Permanent hardness of water is caused by dissolved :-
A) CaCl
B) Ca(HCO3)2
C) Mg(HCO3)2
D) NaOH
Answer:
The answer is B
Explanation:
Answer:
Hello!
Your answer is B) Ca(HCO3)2!!
Explanation:
Hope this helps you!!
itsMATT04
:>
How many moles are in 10.23 g of PO4-3? How many moles are 8.25 x 10^28 molecules of Na2CO3? What is the mass of 6 moles of CH2O? How many formula units are in 6.34 g of NaCl? How many ions are in 0.25 moles of Cu+2? How many grams are in 3.4 x 10^24 molecules of CH4? How many moles are in 10 mL of water (density of water = 1 g/mL)? (sorry for so many questions in one)
Answer:
1) 0.1077 moles
2) 137043.2 moles
3) 180.186 grams
4) 6.53×10²² molecules or formula units
5) 1.505×10²³ ions
6) 90.626 grams
7) 0.555 moles
Explanation:
1) The number of moles, n = Mass of the substance/(Molar mass of the substance)
The molar weight of PO₄⁻³ is 94.971 g/mol
The number of moles in 10.23 g of PO₄⁻³ is n =10.23/94.971 = 0.1077 moles
The number of moles in 10.23 g of PO₄⁻³ = 0.1077 moles
2) The number of molecules of Na₂CO₃ in one mole of Na₂CO₃ is given by the Avogadro's number, [tex]N_A[/tex] = 6.02 × 10²³ molecules
Therefore, the number of moles in 8.25 × 10²⁸ molecules of Na₂CO₃ is found by determining how many Avogadro's number of molecules are in 8.25 × 10²⁸ molecules of Na₂CO₃ as follows;
The number of moles in 8.25 × 10²⁸ molecules of Na₂CO₃ = (8.25 × 10²⁸)/(6.02 × 10²³) = 137043.2 moles
The number of moles in 8.25 × 10²⁸ molecules of Na₂CO₃ = 137043.2 moles
3) The molar mass of CH₂O = 30.031 g/mol
Therefore, the mass of 6 of CH₂O = 6 moles × 30.031 g/mol = 180.186 grams
The mass of 6 of CH₂O = 180.186 grams
4) The molar mass of NaCl = 58.44 g/mol
The number of moles of NaCl in 6.34 g of NaCl 6.34/58.44 = 0.1085 moles
1 formula unit of NaCl = 1 molecule of NaCl
The number of molecules in one mole of a substance = [tex]N_A[/tex] = 6.02 × 10²³
Therefore, the number of molecules in 0.1085 moles of NaCl = 6.02 × 10^(23) × 0.1085 = 6.53×10²² molecules or formula units
5) The number of ions per mole of any substance is give by Avogadro's number, [tex]N_A[/tex] = 6.02 × 10²³ ions,
The number of ions in 0.25 moles of Cu⁺² = 0.25×6.02 × 10²³ ions = 1.505×10²³ ions
The number of ions in 0.25 moles of Cu⁺² = 1.505×10²³ ions
6) The molar mass of CH₄ = 16.04 g/mol
The number of moles, n, in 3.4×10²⁴ = 3.4×10^(24)/(6.02×10^(23)) = 5.65 moles 5.65*16.04
The mass of 5.65 moles of CH₄ = 5.65 moles × 16.04 g/mol = 90.626 grams
The mass of 3.4×10²⁴ molecules of CH₄ = 90.626 grams
7) The density of water = 1 g/mL
The volume of the water 10 mL
The mass of the water = Volume × Density = 10 mL × 1 g/mL= 10 grams
The molar mass of water = 18.015 g/mol
The number of moles of water in 10 g of water = mass/(Molar mass) = 10/18.015 = 0.555 moles.
Which of the following would NOT be a conversion factor for mole to mole calculations for the following reaction: 2Al + 3Cl2 --> 2AlCl3
A: 3 mol Cl2 3 mol Al
B: 2 mol Al 3 mol Cl2
C: 2 mol AlCl3 2 mol Al
D: 3 mole Cl2 2 mol AlCl3
Answer: A. 3 mol [tex]Cl_2[/tex] 3 mol Al:
Explanation:
Te given balanced chemical equation is :
[tex]2Al+3Cl_2\rightarrow 2AlCl_3[/tex]
According to the stochiometry :
A: 3 mol [tex]Cl_2[/tex] 3 mol Al:
3 moles of chlorine reacts with 2 moles of aluminium
B. 2 mol [tex]Al[/tex] 3 mol [tex]Cl_2[/tex]:
2 moles of aluminium reacts with 3 moles of chlorine
C. 2 mol [tex]AlCl_3[/tex] 2 mol Al
2 mol of aluminium produces 2 mol of [tex]AlCl_3[/tex]
D. 3 mol [tex]Cl_2[/tex] 2 mol [tex]AlCl_3[/tex]
3 moles of chlorine produces with 2 moles of [tex]AlCl_3[/tex]
Thus the conversion factor not used for mole to mole calculations is 3 mol [tex]Cl_2[/tex] 3 mol Al:
Adrian loves the pancakes! The problem is, the recipe serves only six, and he has 540 people in his family (including aunts, uncles, and cousins). Now, he needs help increasing the recipe to feed his entire family. However, Adrian is particular - he insists on using only three significant figures with scientific notation.
Answer:
ingredient. U.s unit. SI unit. SI unit(540)
flour. 2cups. ²/6. 180cups = 1.8×10²
milk. 2cups. ²/6. 180cups. =1.8×10²
eggs. 2. ²/6. 180eggs. =1.8×10²
melted butter. ⅓cup ¹/18. 30cups. =3×10¹
sugar. 1spoon. ¹/6. 90spoons. =9×10¹
baking powder 2spoons ²/6. 180spoons. =1.8×10²
salt. ½spoon. ¹/12. 45spoons. =4.5×10¹
Explanation:
1) to get the SI unit divide the U.S unit by 6
example:eggs = 2÷6. =²/6
2) to get the SI unit for 540 people ,multiply the SI unit by 540.
example:eggs ²/6×540. = 180
3)convert the answers to scientific notation
example:eggs =180. =1.8×10²