Answer:
8.9L is the volume of the gas that must be dissolved.
Explanation:
For a weak base, we can find [(CH₃)₃N] using the equation:
Kb = [OH⁻] [[(CH₃)₃NH⁺] / [(CH₃)₃N]
As [OH⁻] = [[(CH₃)₃NH⁺] and [OH⁻] = 10^-pOH = 3.16x10⁻³M:
6.3x10⁻⁵ = [3.16x10⁻³M][3.16x10⁻³M] / [(CH₃)₃N]
[(CH₃)₃N] = 0.1587M
As the volume is 2.5L, moles are:
2.5L * (0.1587mol / L) = 0.3968moles
Using:
PV = nRT
We can solve for volume of the gas as follows:
P = 1atm at STP; n = 0.3968moles; R = 0.082atmL/molK; T = 273.15K at STP
V = 0.3968mol*0.082atmL/molK*273.15K/1atm
V = 8.9L is the volume of the gas that must be dissolved.
Write the full electron configuration of calcium.
152 2s22p6 352 4s2
Use the electron configuration to predict the most likely oxidation state of calcium?
(Explain your answer please)
Answer: [tex]1s^22s^22p^63s^23p^64s^2[/tex] , oxidation state = +2
Explanation:
Electronic configuration represents the total number of electrons that a neutral element contains. We add all the superscripts to know the number of electrons in an atom. The electrons are filled according to Afbau's rule in order of increasing energies.
The electronic configuartion of Calcium with atomic number 20 is :
[tex]Ca:20:1s^22s^22p^63s^23p^64s^2[/tex]
As calcium can easily lose its two valence electrons to attain stability , its oxidation state is +2.
[tex]Ca^{2+}:18:1s^22s^22p^63s^23p^6[/tex]
If 250J of energy from the Sun hits the
atmosphere at a certain place, but only 128J
makes it to the surface of the Earth, how much
energy is reflected by the atmosphere?
If the boiling point of HCl is -85 (C) and the boiling point of Hl is -36 (C),
what would be a good estimate for the boiling point of HBr? *
b. How many grams of CO2 are produced from 36
grams of CH4?
Answer:
Ch4 G +2o2 g co2 G +2h2o g How many moles of methane are required to produce 22 g co2 G after combustion
Explanation:
it's 22 grams..
hope the answer was helpful ....
A cart with the weight was already moving lefgt with a constant speed when the two forces shown were applied to the car. How do the two forces affect the motion of the cart?
Explanation:
the cart will be slowed down because the weight was added to the right the cart won't stop for about 10 seconds. there will be a lot of pull and friction therefore the cart slows down drastically
Identify the type of the following chemical reaction.
Answer:
Hydrolysis reaction
Explanation:
CaCO3(s)+2H*(aq) →Ca2+ (aq)+H2001+CO262)
Initial
Initial Concentration
Experiment
Massof CaCO3(s) (grams) of Haq) (M)
1
5.00
1.0
2
5.00
2.0
Initial Temperatureof
Reactants (°C)
25.0
25.0
The initial rate of formation of CO2(e) from the chemical reaction represented by the
equation above was studied in two separate experiments. The table above provides the
experimental conditions used. If both experiments are carried out with finely powdered
samples of the solid and 50.0mL of HCl(aq), which experiment, if any, will have the faster
initial rate of formation of CO2(g) and why?
The rate of formation of CO2(g) will be the same because the mass of CaCO3(s) and the volume of
HCl(aq) used will be the same in both experiments.
CO2(g) will be formed at a faster rate in experiment 2 because more H* particles can react per
unit time.
O CO26) will be formed at a faster rate in experiment 1 because the proportion of CaCO3(s)
particles to H* particles will be greater.
The rate of formation of CO2(e) will be the same because the surface area of the solid and the
average kinetic energy of the particles will be the same in both experiments.
Answer:CO2(g) will be formed at a faster rate in experiment 2 because more H+ particles can react per unit time
Explanation:
[tex]CO_2_{(g)}[/tex] will be formed at a faster rate in experiment 2 because more H+ particles can react per unit time. The correct option is C.
What is a chemical reaction?A chemical reaction is a process that transforms one or more substances, known as reactants, to one or more different substances, known as products. Chemical elements or compounds are examples of substances.
Combination, decomposition, single-replacement, double-replacement, and combustion are the five basic types of chemical reactions.
Analyzing the reactants and products of a specific reaction will allow you to categorize it. Some reactions will fall into multiple categories.
If both experimental studies are carried out with finely powdered samples of the solid and 50.0mL of HCl (aq), then [tex]CO{_2_{(g)}[/tex] will be formed at a faster rate in experiment 2 because more H+ particles can react per unit time.
Thus, the correct option is C.
For more details regarding a chemical reaction, visit:
https://brainly.com/question/29039149
#SPJ2
What is the answer, and please make it fast.
Describe each layer of Earth’s current atmosphere below:
Answer:
exosphere thermosphere mesosphere stratosphere troposphere
How many moles are equal to 89.23g of aluminum chloride, AlCl3?
Answer:
[tex]\boxed {\boxed {\sf 0.6692 \ mol \ AlCl_3}}[/tex]
Explanation:
To convert from grams to moles, we must use the molar mass. This can be calculated using the Periodic Table.
1. Molar Mass
First, identify the elements in the compound AlCl₃. They are aluminum and chlorine. Now find the masses:
Al: 26.981538 g/mol Cl: 35.45 g/molTake a look at the compound. There is a subscript of 3 after chlorine, so we must multiply its molar mass by 3 then add aluminum's.
AlCl₃= 3(35.34 g/mol) + 26.981538 g/mol = 133.331538 g/mol2. Convert Grams to Moles
We can use the molar mass as a ratio.
[tex]\frac{133.331538 \ g \ AlCl_3}{1 \ mol \ AlCl_3}[/tex]
Multiply by the given number of grams: 89.23
[tex]89.23 \ g \ AlCl_3 * \frac{133.331538 \ g \ AlCl_3}{1 \ mol \ AlCl_3}[/tex]
Flip the fraction so the grams of aluminum chloride cancel out.
[tex]89.23 \ g \ AlCl_3 * \frac{1 \ mol \ AlCl_3}{133.331538 \ g \ AlCl_3} = 89.23 \ * \frac{1 \ mol \ AlCl_3}{133.331538}[/tex]
[tex]\frac{89.23 \ mol \ AlCl_3}{133.331538}[/tex]
[tex]0.6692340112 \ mol \ AlCl_3[/tex]
3. Round
The original measurement of grams has 4 significant figures. We must round to 4 sig figs.
For the number we calculated, that is the ten thousandth place.
The 3 in the hundred thousandth place tells us to leave the 2.
[tex]0.6692 \ mol \ AlCl_3[/tex]
There are about 0.6692 moles of aluminum chloride in 89.23 grams.
What is the destiny of an object that has a mass of 20 grams and a volume of 10 millimeters
Answer:
2gcm⁻³
Explanation:
Given parameters:
Mass of the object = 20g
Volume = 10mL
Unknown:
Density of the object = ?
Solution:
Density of a body is its mass per unit volume;
Density = [tex]\frac{mass}{volume}[/tex]
We need to convert mL to cm³ for the volume
1mL = 1cm³;
10mL is therefore, 10cm³
So;
Density = [tex]\frac{20}{10}[/tex] = 2gcm⁻³
What is the mass number of 199F?
Answer:
fluorine
Explanation:
hope it helps
If 525 N of force is applied to a 4.5
kg mass, how fast will it accelerate?
Answer:
121.11m/s²
Explanation:
Given parameters:
Force = 525N
Mass = 4.5kg
Unknown:
Acceleration = ?
Solution:
From Newton's second law of motion, we can find the solution to this problem. Using the expression below:
F = m x a
F is the force
m is the mass
a is the acceleration
So'
525 = 4.5 x acceleration
Acceleration = 121.11m/s²
what is the correct answer ??
Answer:
Quantum mechanical which is described by the Greek letter phi that describes how energy is transmitted as electrons change or jump from one shell to the nextExplain which has a greater impact on the kinetic energy of an object - the
object's mass or the object's speed?
Answer:
it is the objects mass, I learned this last semester
The object's mass has a greater impact on the kinetic energy of an object as it is the mass the mass on which force is exerted and in which energy is stored to be transformed in to kinetic energy.
What is force?Force is defined as a cause which is capable of changing the motion of an object. It can cause an object which has mass to change it's velocity. It is also simply a push or a pull . It has both magnitude as well as direction.Hence, it is a vector quantity.
It has SI units of Newton and is represented by'F'.Newton's second law states that force which acts on an object is equal to momentum which changes with time. If mass of object is constant, acceleration is directly proportional to net force acting on an object.
The concepts which related to force are thrust and torque .Thrust increases the velocity of an object and torque produces change in rotational speed of an object.
Learn more about force,here:
https://brainly.com/question/28875770
#SPJ6
How many molecules are contained in 78.41 L of Ne
What happens when two magnets rappel each other hehe
Answer:
Every magnet has two sides: a north pole and a south pole. We use these names because if you hang a magnet from a thread, the magnet’s north pole points (almost) towards the north direction.
This is because the Earth’s core (its centre) is a large, weak magnet. Your little, strong magnet lines up with Earth’s magnetic core, so it points north. That’s how a magnetic compass works.
Which of these are matter?
atoms
molecules
energy
The atoms and molecules are matter. Therefore, option A and B are correct.
What is matter ?Matter is defined as anything that occupies space and has mass—in other words, the "stuff" of the universe. All matter is composed of substances known as elements, which have distinct chemical and physical properties and cannot be broken down into other substances via ordinary chemical reactions.
Matter is defined as anything that occupies space and has mass. Water and air are examples of matter, whereas feelings and sound are not.
Physical and chemical properties can be used to classify matter. Matter is defined as something that occupies space and has mass. Solid, liquid, and gaseous are the three states of matter. The conversion of a material from one state of matter to another without changing its chemical composition is referred to as a physical transition.
Thus, option A and B are correct.
To learn more about the matter, follow the link;
https://brainly.com/question/3764450
#SPJ2
Which of the following gases was NOT part of Earth’s original atmosphere?
Answer:anser choices
Explanation:
Answer:oxygen hahah
Explanation:
8. An element that has strong intermolecular forces is most likely to have:
•a boiling point below room temperature
•a melting point below room temperature
•a boiling point very close to its melting point
•a very high melting point
Answer:
a very high melting point answer
PLEASE HELP YOU HAVE TO CLICK THE CORRECT ONES PLEASE IM BEGGING YALL IF I FAIL THIS I FAIL MY GRADE....... Directions: Select each correct image. More than one image may be correct.
The diagrams below show interactions between charged particles. The blue particles are negatively charged, and the red particles
are positively charged.
Which of the diagrams shows a correct interaction between the fields of two charged particles?
Answer:
D
Explanation:
Since the negative particles are going towards the negative section and the positive particles are leaving the positive section. Additionally, opposite charges attract each other and like charges repel each other.
There will be attraction between the opposite charges and repulsion among the like charges. Here the diagram D shows a correct interaction between the fields of two charged particles.
What is a electric field?The electric force acting per unit charge is defined as the electric field. They are generally produced by changing the electric charges or magnetic fields. The electric field strength is expressed in volt per meter (V/m).
E = F/Q
In an electric field it is the electric charge which provides the direction of field. If the charge is negative, then the field is directed towards the charge. A field is directed away from the charge if the charge is negative.
All the electric fields start form a positive charge and end on a negative charge. If two positive charges interact then there will be repulsion between them. But if a positive charge interact with a negative charge then there will be attraction among them.
In diagram D there is an attraction between the opposite charges.
Thus the correct option is D.
To know more about the electric field lines, visit;
https://brainly.com/question/28128803
#SPJ5
Which of the following pairs of compounds will react to form a precipitate? Why?
calcium chloride and silver nitrate
sodium iodide and potassium chloride
calcium chloride and sodium nitrate
Answer:
calcium chloride and silver nitrate
Explanation:
A precipitate is often formed in a double replacement reaction when the reaction yields an insoluble product.
Consider the reaction between calcium chloride and silver nitrate;
CaCl2(aq) + 2AgNO3(aq) -------->2AgCl(s) + Ca(NO3)2(aq)
AgCl is insoluble in water, hence the reaction leads to the formation of a precipitate.
How do you determine if a polyatomic ion needs to be counted together?
Answer:
Calculate from Oxidation Number
The oxidation number of oxygen is -2, and the oxidation number of hydrogen is +1. Add together the oxidation numbers of all the atoms in the polyatomic ion. In the example, -2 +1 = -1. This is the charge on the polyatomic ion.
How many Molecules are in 20 grams of CO?
Answer:
2.74 x 1023 molecules of CO2.
Explanation:
There are 2.74 x 1023 molecules of CO2.
As temperature changes, rocks expand and
contract. The rocks eventually break into
smaller pieces. Which process accounts for
this expansion and contraction of rocks?
Answer:
Thermal heating and cooling
Explanation:
This process described results from thermal heating and cooling as a mechanism of mechanical weathering of rock bodies.
It is often more pronounced in the arid regions of the world where there is a significant difference between day and night temperatures. With mechanical weathering, rocks are broken down into fragments by physical disintegration. During the day, the high temperature causes the rock to expand significantly. At night, the rock contracts and on the long run, joints and fractures begins to appear on the rock surface.magnesium has two naturally occurring isotopes: magnesium-24 and magnesium-25. if the average atomic mass of magnesium is 24.305 amu, what are the percent abundance's of each isotope?
a. 69.5% and 30.5%
b. 50% and 50%
c. 62% and 38%
d. 0.7% and 0.3%
e. .62% and .38%
Answer:
a. 69.5% and 30.5%
Explanation:
we know there are two naturally occurring isotopes of Mg, Mg-24 and Mg-25.
First of all we will set the fraction for both isotopes
X for the isotopes having mass 25
1-x for isotopes having mass 24
The average atomic mass of Mg is 24.305 amu.
we will use the following equation,
25x + 24 (1-x) = 24.305
25x + 24 - 24x = 24.305
25x- 24x = 24.305 - 24
1x = 0.305
x= 0.305 /1
x= 0.305
0.305 × 100 = 30.5 %
30.5 % is abundance of Mg-25 because we solve the fraction x.
now we will calculate the abundance of Mg-24.
(1-x)
1-0.305 =0.695
0.695 × 100 = 69.5%
69.5% for Mg-24.
10. (a) Describe how the structure of an alloy is different to a pure metal
You can type directly into this text box below: (2)
10. (b) Suggest why coins are not made of pure copper. Do not give cost as a reason.
You can type directly into this text box below: (1)
Grade 5+ 15 marks
Total 27 marks
Um, yea, please help lol
Chemistry. Question is on photo. Will mark Brainy for whoever gets this right.
Answer:
49.18 eV hope this helps
12. What is the mass number of an atom that has 4 protons, 4 electrons, and 5 neutrons?
Answer:
9
Explanation:
mass number = protons + neutrons
= 4 + 5 = 9
Is corona increasing or decreasing the albedo effect? Explain.
Answer:
corona is increasing
.......
Explanation:
.....