According to Table 10.1, sand dunes are associated with the depositional environment of aeolian (wind-blown) systems. The type of sedimentary rock formation associated with sand dunes is known as eolian sandstone.
Utilizing Table 10.1 Depositional Environments for Sedimentary Rocks, the type of sedimentary rock formation associated with sand dunes is called Aeolian Sandstone. This type of rock forms in desert environments where wind-driven sand accumulates into dunes, resulting in the deposition of well-sorted and well-rounded sand grains. The aeolian sandstone is typically characterized by large-scale cross-bedding and is primarily composed of quartz grains.
Learn more about sandstone here:
https://brainly.com/question/13886415
#SPJ11
on mount st. helens, the intensity of disturbance ranged from extremely high (lava dome, pumice plain) to moderate (mudflow zone, blowdown zone), to low (scorch zone). in which area is the biotic stress of competition most likely to control succession?
In Pumice Plain area is the biotic stress of competition most likely to control succession.
On the northern slopes of Mount St. Helens, inside the National Volcanic Monument, the Pumice Plain is a Class I Research Area. The Pumice Plain has stayed a pure natural laboratory since the volcanic explosion. Unlike any other place on Earth, the site has given researchers the chance to observe how new ecosystems are formed.
Because of the distinctive opportunities it offers, researchers are drawn to this website. Ecosystems are huge, intricate networks where it might be challenging to isolate any one cause.
Know more about Mount st. helens here
https://brainly.com/question/7602037
#SPJ4
differentiate between the dip slope of of a homoclinal ridge and cuesta
The scarp slope maintains a high slope through undermining and mass wasting as a result of fast weathering of a less resistant layer below, while the dip slope is at or less than the angle of dip of the beds.
What is the dip slope of a Homoclinal ridge?
Cuestas, where the strata very gently descend from 10 to 25 degrees Homoclinal ridges dip at an angle greater than 45°, such as the Hogsback north of Alice in the Eastern Cape, where the dip slope is quite high. Homoclinal ridges dip between 25° and 45°, for example the Magaliesberg hogsback ridges.
In homoclinal ridge classification, the angle of the dip slope is used. a ridge that has a sharp scarp slope and a mild dip slope. The dip slope has a 10o to 25o inclination to the horizontal. The dip slope is typically utilised for forestry and has good soil.
The dip slope is 10 to 25 degrees from horizontal. Cuesta basins and cuesta domes are both products of folding.
learn more about Homoclinal ridge:
https://brainly.com/question/13100936
#SPJ9
Why does the unequal supply and distribution of water help contribute to the conflict between the State of Palestine and Israel
The unequal supply and distribution of water resources in the region is a major source of conflict between the State of Palestine and Israel because Israel uses water as a tool of power and domination over the Palestinian people.
What is one reason for the Palestine conflict ?Israel has used its control over water resources to deny Palestinians access to water or to limit their access to insufficient quantities. This has resulted in a situation where many Palestinian communities are forced to rely on contaminated or inadequate water sources, which can lead to a range of health problems.
In addition, Israel has restricted the ability of Palestinians to develop their own water resources or to drill new wells, making it difficult for them to meet their basic water needs.
Find out more on Palestine at https://brainly.com/question/9983505
#SPJ1
which type of city model contains a distinct residential spine proceeding outward from center city along the main boulevard?
The type of city model that contains a distinct residential spine proceeding outward from the center city along the main boulevard is the Sector Model, also known as the Hoyt Model.
The type of city model that contains a distinct residential spine proceeding outward from center city along the main boulevard is known as the "spine and node" model. This model is characterized by a central business district or "node" at the center of the city, with residential areas radiating outward along major transportation corridors, typically along a main boulevard or "spine." This type of model is often found in cities that have experienced rapid growth and urbanization, and is designed to accommodate large numbers of residents while maintaining efficient transportation and infrastructure.
Learn more about boulevard here:
https://brainly.com/question/16130982
#SPJ11
The type of city model that contains a distinct residential spine proceeding outward from center city along the main boulevard is known as the "spine and loop" model. This model typically features a central business district surrounded by a loop highway, with a residential spine branching out from the loop along the main boulevard. The spine is characterized by residential development, while commercial and industrial activities are typically located within the loop.
The type of city model that contains a distinct residential spine proceeding outward from the center city along the main boulevard is known as the "spine-and-loop" model. This model is also referred to as the "radial-circumferential" model and is commonly observed in many American cities developed during the early 20th century.The spine-and-loop model features a central business district at the heart of the city, surrounded by a radial network of main boulevards or avenues. Along each of these major thoroughfares, a residential spine develops, with rows of residential buildings extending outwards from the center city. The residential spines are then connected by looped streets, which provide access to the neighborhoods between the spines.The spine-and-loop model has several advantages, including a high level of accessibility, as well as the potential for commercial and residential growth along the main thoroughfares. Additionally, the model allows for easy navigation and efficient transportation, as well as a sense of community within each neighborhood. However, the model can also be criticized for promoting urban sprawl and car-dependent lifestyles, as well as limiting pedestrian and bicycle access.Overall, the spine-and-loop model remains a significant example of urban planning and design, and it continues to influence the development of cities around the world. The type of city model that contains a distinct residential spine proceeding outward from the center city along the main boulevard is the Sector Model, also known as the Hoyt Model.
To learn more about residential click on the link below:
brainly.com/question/29898240
#SPJ11
Anoki's grandparents live on the land that his Native American tribe has traditionally inhabited, and they practice traditional religious customs there.
When Anoki's grandparents come to visit them in the city, they do not observe any of the rituals. Why might this be?
OA. The city is too dirty for religious observances of any type.
OB.
OC.
D.
They follow an animist faith that is centered in the land of the tribe.
They are embarrassed to follow such old-fashioned practices.
They don't want to diffuse their religion.
Answer:
Explanation:The Native American Church (NAC), also known as Peyotism and Peyote Religion, is a Native American religion that teaches a combination of traditional Native American beliefs and Christianity, with sacramental use of the entheogen peyote.
profile across kessler mountainif the distance between a and a is 1.5 miles, then what is the vertical exaggeration of the topographic profile that you constricted above?
The vertical exaggeration of the topographic profile is Y/(5,280*X).
To calculate the vertical exaggeration of the topographic profile, we need to know the ratio of the vertical scale to the horizontal scale.
This ratio is equal to the vertical exaggeration of the profile.Let's first convert the distance between points A and A on the profile to inches, since the scales are given in terms of inches.
If the distance between A and A on the profile is 1.5 miles, and the horizontal scale is X miles per inch, then the distance between A and A on the profile in inches is:
1.5 miles * (1/X miles per inch) = 1.5/X inches
Now, we need to find the ratio of the vertical scale to the horizontal scale, which will give us the vertical exaggeration.
If the vertical scale is Y feet per inch, then the ratio of the vertical scale to the horizontal scale is:
Y feet per inch / X miles per inch
To simplify this ratio, we need to convert the vertical scale from feet to miles. There are 5,280 feet in a mile, so:
Y feet per inch = (Y feet per inch) * (1 mile per 5,280 feet) = Y/5,280 miles per inch
Now, we can substitute this into the ratio:
(Y/5,280 miles per inch) / (X miles per inch) = Y/(5,280*X)
-----------The given question is incomplete, the complete question is:
"Assuming a horizontal scale of X miles per inch and a vertical scale of Y feet per inch, what is the vertical exaggeration of the topographic profile constructed across Kessler Mountain, if the distance between point A and point A on the profile is 1.5 miles?"-----------
To know more about topographic, click here.
https://brainly.com/question/29764663
#SPJ4
stone extraction from the earth’s surface for building purposes occurs in ________.
Stone extraction from the earth’s surface for building purposes occurs in quarries.
Quarrying is the process of extracting stones from natural rock surfaces. Quarrying stone is not the same as mining. Quarrying is done on the exposed surface of natural rocks to the sun's light, whereas mining is only done underground. Stone quarrying is often done in hilly places where there is an abundance of stone.
The stone industry is widely defined based on the function of the stone, which includes building, paving blocks, curbstones, blackboards, and monumental usage. The requirement for a certain sort of stone, the intended application, and what we will use the majority of the time will define the site of a quarry. Granitic rocks, limestones, marbles, slates, sandstones, and other materials are among those used.
To learn more about Sand and Gravel:
https://brainly.com/question/28558182
#SPJ4
Scientists propose an early period of heavy bombardment in the Solar System because a. the Moon is heavily cratered. b. all the craters on the Moon are old. c. the smooth part of the Moon is nearly as old as the heavily cratered part. d. all the craters on the Moon are young.
Scientists propose an early period of heavy bombardment in the Solar System because the Moon is heavily cratered.
A is the correct answer.
Failed planets and smaller asteroids crashed into larger worlds between 4.5 and 3.8 billion years ago, leaving scars on their surfaces. Impacts in the solar system may have increased near the end of the conflict, during a time known as the Late Heavy Bombardment.
The large planets were responsible for the Late Heavy Bombardment because as they moved about, circling closer and further from the sun, they pushed many asteroids and other smaller solar system objects with them.
Strong evidence for a period of intense bombardment can be found in the age distribution of meteors observed on Earth, major impacts on the terrestrial planets and our Moon, clues to shock impacts in the asteroid belt, and other factors.
To know more about bombardment visit:
https://brainly.com/question/10317409
#SPJ4
Scientists propose an early period of heavy bombardment in the Solar System because the Moon is heavily cratered. So, the correct option is A. the Moon is heavily cratered.
The Moon has a lot of impact craters that indicate it has been hit by a lot of objects in the past. The craters on the Moon are not all the same age. Some are older than others. However, they all indicate that there was a time when the Moon was bombarded by a lot of objects. The smooth part of the Moon is nearly as old as the heavily cratered part, which suggests that the bombardment occurred early in the Moon's history.
The early period of heavy bombardment in the Solar System is thought to have happened about 4 billion years ago. During this time, the inner Solar System was full of debris left over from the formation of the planets. This debris included asteroids, comets, and other objects. These objects collided with the Moon and other planets in the inner Solar System, causing a lot of damage. The heavy bombardment period was not limited to the Moon.
Other objects in the inner Solar System also show evidence of being hit by a lot of objects during this time. The early period of heavy bombardment was a key event in the history of the Solar System. It is thought to have played a role in shaping the planets and their moons, and may have even played a role in the origin of life on Earth. So, the correct option is A. the Moon is heavily cratered.
For more such questions on Solar System
https://brainly.com/question/7953310
#SPJ11
true or false greater temperature fluctuations are seen in coastal areas due to the marine effect.
Answer:
false
Explanation:
The rubbing of the North American Plate against the Pacific Plate causes ____________________ along the Pacific Coast of North America.
The Rocky Mountians
Earthquakes
Melted Glaciers
The rubbing of the North American Plate against the Pacific Plate causes earthquakes along the Pacific Coast of North America.
The North American Plate and the Pacific Plate are two tectonic plates that meet at a boundary called the Pacific Plate Boundary. This boundary extends along the western coast of North America, from Alaska down to California. The two plates are moving in different directions, with the Pacific Plate moving northwest and the North American Plate moving southwest. As a result, the North American Plate is being pushed against the Pacific Plate, causing a buildup of stress and tension at the boundary. Eventually, this stress is released in the form of earthquakes, as the plates suddenly slip past each other. The Pacific Coast of North America is particularly vulnerable to earthquakes because it lies along this plate boundary, and the region has experienced some of the most significant earthquakes in history, such as the 1906 San Francisco earthquake and the 1964 Alaska earthquake. Earthquakes along the Pacific Coast can be very destructive, causing damage to buildings and infrastructure, and posing a significant threat to human safety.
Learn more about tectonic plates:
https://brainly.com/question/19317822
#SPJ11
The rubbing of the North American Plate against the Pacific Plate causes Earthquakes along the Pacific Coast of North America.
The rubbing of the North American Plate against the Pacific Plate is a result of plate tectonics, and it is responsible for causing a number of geologic events along the Pacific Coast of North America. The most notable of these events are earthquakes, which are the result of the two plates grinding against each other.
This movement also causes the melting of glaciers, as the friction creates heat which melts the ice. The strain of the plates pushing against each other is also responsible for the formation of the Rocky Mountains, which are caused by the uplift of the plates. This same force can also cause volcanoes to form, as molten rock is forced up from the mantle. In all, the rubbing of the two plates has had a major effect on the geology of the region, and it continues to shape the landscape even today.
Know more about Plate tectonics here
https://brainly.com/question/19317822#
#SPJ11
creates a zone of still water near the coastline is called?
The zone of still water near the coastline is called a "littoral zone". It is created by the interaction between waves and the seabed, as well as other factors such as tides and currents.
A littoral cell is a section of coastline that is relatively self-contained, with a balance between the amount of sand added to the beach (by rivers or offshore currents) and the amount of sand removed from the beach (by waves and longshore currents). As waves approach the shore, they cause water to pile up in a zone of still water, which can help to protect the beach from erosion and provide a calm area for swimming and recreation. The littoral cell is an important concept in coastal management, as it helps to define the boundaries of coastal ecosystems and inform decisions about beach nourishment, erosion control, and other coastal activities.
Learn more about ecosystems here:
https://brainly.com/question/13979184
#SPJ11
The zone of still water near the coastline is called a "littoral zone". This term refers to the area of the ocean that is shallow enough to be influenced by the coastline and the waves that crash against it.
The littoral zone can extend from the high tide line to the point where waves no longer have an effect on the seabed. The littoral zone is an important habitat for many marine creatures, including various types of fish, shellfish, and seaweed. These organisms are adapted to living in the shallow waters of the coastline, where they can take advantage of the abundant sunlight and nutrients that are available. The littoral zone can also have a significant impact on the coastal ecosystem. For example, the waves that crash against the coastline can erode the shoreline and change the shape of the coastline over time.
Additionally, the littoral zone can act as a buffer zone, helping to protect inland areas from the effects of storms and erosion. Overall, the littoral zone is an important part of the coastal ecosystem, providing a home for many marine organisms and playing a crucial role in shaping the coastline and protecting inland areas from the effects of storms and erosion.
For more such questions on littoral zone
https://brainly.com/question/1133225
#SPJ11
the hottest stars show little evidence of hydrogen in their spectra because hydrogen is mostly ionized in the stars temperatures. true or false
True, the hottest stars show little evidence of hydrogen in their spectra because hydrogen is mostly ionized at the high temperatures found in these stars.
The hottest stars, also known as O-type stars, show little evidence of hydrogen in their spectra because hydrogen is mostly ionized at the high temperatures found in these stars. O-type stars have surface temperatures of around 30,000 kelvin, which is hot enough to ionize hydrogen atoms and strip them of their electrons. As a result, the spectral lines that are normally associated with neutral hydrogen atoms, such as the Balmer series, are very weak or even absent in the spectra of O-type stars. Instead, these stars show strong spectral lines associated with ionized elements, such as helium, nitrogen, oxygen, and silicon, which are produced by the high temperatures and intense radiation fields found in these stars.
Learn more about O-type stars :
https://brainly.com/question/10429151
#SPJ11
The correct answers for the statement ''the hottest stars show little evidence of hydrogen in their spectra because hydrogen is mostly ionized in the stars temperatures'' is True.
The hottest stars have such high temperatures that the majority of the hydrogen atoms in their atmospheres are ionized, meaning they have lost their electrons. When this happens, the hydrogen atoms no longer absorb or emit light at the same wavelengths as neutral hydrogen atoms.
As a result, there is little evidence of hydrogen in the spectra of these stars. Instead, other elements that are present in the stars, such as helium and carbon, produce the dominant spectral lines. This is why the spectra of hot stars look very different from those of cooler stars, which have more neutral hydrogen in their atmospheres.
To know more hydrogen,refer to the link:
https://brainly.com/question/28937951#
#SPJ11
Help need this asap fast
The answers are given as follows:
Environmental concerns can decrease demand for coal because there is a growing awareness of the negative impact of burning fossil fuels on the environment.
As a result, industries and individuals are seeking alternative sources of energy that are more sustainable and eco-friendly.
On the other hand, agricultural output tends to increase demand for coal as it is often used to power machinery and equipment for farming and harvesting crops. The demand for coal as a power source in agriculture can increase as the need for food production grows, especially in developing countries where agriculture is a vital industry.
Learn more about coal at:
https://brainly.com/question/30560160
#SPJ1
which of the following activities can contribute to an increase in the carbon dioxide in the earth's atmosphere? i. the burning of fossil fuels ii. volcanic activity iii. condensation
Answer: I & II
Explanation: Burning fossil fuels such as coal can most definitely release CO2. For example, when one burns a fire, black smoke is released. Along with this, large volcanic eruptions can also eject millions of tons of CO2 into the atmosphere.
which of the following statements apply to the asthenosphere, but not the lithosphere? group of answer choices deforms mainly by brittle fracturing and faulting cool, rigid layer of crust and upper mantle that forms the tectonic plates zone in the upper mantle that deforms by plastic flowage
"The following statement applies to the asthenosphere, but not the lithosphere - a zone in the upper mantle that deforms by plastic flowage."
The asthenosphere is the heavy, weak-er layer be-neath the litho-spheric mantle. It lies bet-ween about 100 km (62 miles) & 410 km (255 miles) be-neath Earth's sur-face. The temper-ature & press-ure of the astheno-sphere are so high that rocks soften & partly melt, be-coming semi-molten.
The lithosphere is the rocky out-er pa-rt of Earth. It is made up of the brittle crust & the top pa-rt of the upper man-tle. The lithosphere is the cool-est & most rigid pa-rt of Earth.
To know more about asthenosphere click below:
brainly.com/question/12637883
#SPJ4
during crucial periods of human evolution, the pleistocene was characterized by group of answer choices aridity, then humidity. massive glaciation, then warm interglacials. high humidity. glaciation, then aridity.
The Pleistocene epoch, which lasted from about 2.6 million years ago to 11,700 years ago, was characterized by dramatic fluctuations in climate and environmental conditions.
One of the defining features of this period was the alternating cycles of glaciation and warming, known as glacial-interglacial cycles. During glacial periods, large portions of the earth's surface were covered by massive ice sheets, causing a drop in sea levels and a drying of many regions. Conversely, during interglacial periods, the earth's climate was relatively warmer and more humid, leading to the expansion of forests and grasslands. These climate fluctuations had a profound impact on human evolution, shaping the morphology, behavior, and distribution of early humans. During the glacial periods, early humans were forced to adapt to harsh and challenging conditions, such as limited food resources and extreme temperatures. In contrast, during the warmer interglacial periods, early humans were able to expand their ranges and take advantage of new resources, leading to the development of new cultural and technological innovations. Overall, the Pleistocene was characterized by a dynamic and ever-changing environment, with dramatic shifts in temperature, humidity, and glaciation playing a key role in the evolution of our species.
Learn more about glacial-interglacial cycles here:
https://brainly.com/question/27755924
#SPJ11
which water source may be placed within strategic locations by some suburban and urban jurisdictions as a backup water supply system? select one: a. ground reservoirs b. private water storage tanks c. cisterns d. swimming pools
The water source that may be placed within strategic locations by some suburban and urban jurisdictions as a backup water supply system is: c. cisterns.
The water source that may be placed within strategic locations by some suburban and urban jurisdictions as a backup water supply system is C. Cisterns. Cisterns are containers designed for storing water, which can be placed underground or above ground, and are commonly used to collect rainwater for later use. In some jurisdictions, cisterns may be placed in strategic locations as a backup water supply system, especially in areas prone to droughts or water shortages. Ground reservoirs, private water storage tanks, and swimming pools may also be used for storing water, but they are typically not used as backup water supply systems in suburban or urban areas.
Learn more about reservoirs here:
https://brainly.com/question/26888545
#SPJ11
when ice forms from seawater, the remaining seawater will have a: question 9 options: darker color. decreased density. higher salinity. higher temperature. lower temperature.
When ice forms from seawater, the remaining seawater will have a higher salinity. So, the correct answer is higher salinity. This is because as the ice forms, it excludes the salt ions, leaving behind a more concentrated solution of seawater.
The process of freezing seawater actually causes the salt ions to become more concentrated in the remaining liquid, which means that the salinity of the seawater will increase. This process is known as "brine rejection." In addition to the increased salinity, the temperature of the remaining seawater may also decrease. This is because the process of freezing requires energy, and that energy is taken from the surrounding seawater. As a result, the seawater in the immediate vicinity of the ice may become slightly cooler.
However, this temperature change is typically only temporary and localized, as the ocean is a large body of water with a high heat capacity. It's worth noting that the color of the seawater is unlikely to change significantly as a result of ice formation. However, in areas where the ice cover is thick enough to block sunlight from penetrating the water, the seawater beneath the ice may appear darker due to reduced light levels. Overall, the primary impact of ice formation on seawater is an increase in salinity. So, the correct answer is higher salinity.
For more such questions on seawater
https://brainly.com/question/27362715
#SPJ11
When ice forms from seawater, the remaining seawater will have a higher salinity.When seawater freezes, the salt and other dissolved minerals in the water are excluded from the forming ice crystals,
resulting in a higher concentration of salt in the remaining seawater. As a result, the remaining seawater becomes denser, with a higher salinity and a lower temperature.This process is important for the ocean's thermohaline circulation, which is driven by differences in temperature and salinity. The denser, saltier water sinks and flows towards the poles, while the less dense, fresher water moves towards the equator. This movement helps to redistribute heat around the globe, playing a key role in regulating the Earth's climate.In terms of color, the remaining seawater may appear darker due to the absence of ice, which reflects sunlight and makes the surface appear brighter. The remaining seawater may also have a slightly lower temperature due to the loss of heat during the freezing process, but this will depend on various factors such as the initial temperature of the seawater and the ambient air temperature.
learn more about salt here:https://brainly.com/question/30105881
#SPJ11
in addition to the destruction created directly by seismic vibrations, how else can earthquakes cause destruction? choose all that apply.
Earthquakes can cause destruction in various ways, in addition to the direct damage caused by seismic vibrations.
Here are some of the ways earthquakes can cause destruction:
Landslides and rockfalls: Earthquakes can cause landslides and rockfalls, particularly in mountainous areas, which can damage infrastructure and buildings, block roads and cause injury or death.Tsunamis: Earthquakes that occur under the ocean can create tsunamis that can cause extensive damage to coastal communities, including buildings, infrastructure, and people.Liquefaction: This is a process in which shaking of loose, water-saturated soil causes the soil to lose strength and stiffness and turn into a liquid-like state. This can cause buildings and other structures to sink or tilt, leading to damage and collapse.Fire: Earthquakes can rupture gas and electrical lines, leading to fires that can cause extensive damage to buildings and other infrastructure.Infrastructure damage: Earthquakes can damage infrastructure such as roads, bridges, and pipelines, which can lead to disruption of services and make it difficult to provide emergency assistance.Psychological trauma: Earthquakes can cause psychological trauma and stress for survivors, particularly if they have lost family members, friends or homes, leading to long-term mental health issues.It is essential to prepare for the different ways earthquakes can cause destruction to mitigate their effects and protect people and infrastructure.
Learn more about Earthquakes here:
https://brainly.com/question/9415516
#SPJ11
(q003) porosity decreases group of answer choices as sedimentary rock weathers. with decreasing compaction of sediments or rock. when rocks develop joints or faults. with the cementing of sediments by mineral grains from groundwater.
Porosity decreases with the cementing of sediments by mineral grains from groundwater. This process reduces the spaces between sediment particles, leading to lower porosity in the sedimentary rock.
Porosity is a measure of how much empty space there is within a rock or sediment. As sedimentary rock weathers, its porosity typically decreases. This can happen for several reasons. One reason is the decreasing compaction of sediments or rock. Over time, the weight of overlying sediment or rock can compress the sediments beneath it, reducing the amount of empty space within the rock. Another reason is when rocks develop joints or faults. These cracks in the rock can allow water to flow through and carry away small particles, reducing the porosity. Finally, porosity can decrease with the cementing of sediments by mineral grains from groundwater. As mineral grains precipitate out of the groundwater, they fill in the empty spaces between sediment particles, reducing porosity.
Learn more about rock here:
https://brainly.com/question/19930528
#SPJ11
Porosity decreases with the cementing of sediments by mineral grains from groundwater. As the minerals cement the sediment particles together, the spaces between the particles are reduced, leading to a decrease in porosity. This process is known as cementation and is a common process in the formation of sedimentary rocks.
Porosity decreases with the cementing of sediments by mineral grains from groundwater. This process reduces the spaces between sediment particles, resulting in a decrease in porosity.The porosity of sedimentary rock refers to the volume of open spaces or voids within the rock that can hold fluids such as water, oil, or gas. As sedimentary rock weathers, its porosity can decrease due to a number of factors. One of the main reasons for decreased porosity is the compaction of sediments or rock over time, which reduces the amount of open space between grains. This can occur through natural processes such as the weight of overlying sediment or from tectonic forces. Another reason for decreased porosity is the cementing of sediments by mineral grains from groundwater. As water flows through sedimentary rock, it can deposit minerals such as quartz, calcite, or iron oxide that bind sediment grains together and reduce the volume of open space. Additionally, when rocks develop joints or faults, they can undergo physical deformation that decreases the porosity by reducing the volume of open space.Overall, the decrease in porosity of sedimentary rock can have important implications for the movement of fluids through rock, including groundwater, oil, and gas. Understanding the factors that affect porosity is therefore essential for many fields, including geology, hydrology, and resource exploration.
To learn more about cementing click on the link below:
brainly.com/question/15286339
#SPJ11
identify the true statement. choose one: a. soil consists of rock or sediment that has been modified over time. b. the organic material at the top of a soil is called the b-horizon. c. a vertical sequence of various soil layers is called the soil horizon.
'Soil consists of rock or sediment that has been modified over time' is the true statement. The right answer is a.
Rock or silt that has been altered over time by physical and chemical interactions with organic matter, rainwater, and creatures is what is referred to as soil. Soil is formed as a result of three processes that occur at or near the Earth's surface. Initially, loose debris, new minerals, and ions in solution are produced by chemical and physical weathering.
Second, rainwater seeps through the trash and carries clay flakes and dissolved ions downstream. Finally, by creating acids that weather grains, absorbing nutrient atoms, and leaving behind organic waste and remnants, bacteria, fungi, plants, and animals engage with sediment.
The correct answer is option a.
Know more about soil here
https://brainly.com/question/31058539
#SPJ4
rhyolite lava group of answer choices has more silica than basalt lava does. indicates the tendency for explosive activity. may freeze in the vent and emerge as a spine. may form a lava dome above the vent. all the possible answers are correct.
"Rhyolite Lava : all the possible answers are correct." All of the given options are right.
What is rhyolite lava?Rhyolitic lavas are sticky & tend to form big blocky lava flows or steep sided piles of lava known as lava do-mes. Rhyolite mag-mas tend to erupt explo-sively, commonly also producing abund-ant ash & pumice Due to their high con-tent of silica & low iron & magnesium contents, rhyolitic magmas form high-ly viscous lavas.
The options - "may freeze in the vent and emerge as a spine; has more silica than basalt lava does; indicates the tendency for explosive activity; may form a lava dome above the vent, are correct."
To know more about Rhyolite Lava click below:
brainly.com/question/13720484
#SPJ4
in the northern hemisphere what is the difference in how the sides of a low pressure system develop during the formation of a mid latitude cyclone
In the northern hemisphere, the sides of a low pressure system in the formation of a mid-latitude cyclone develop in a counterclockwise direction. This is due to the Coriolis effect, which is caused by the Earth's rotation and deflects moving objects to the right in the northern hemisphere. This results in the counterclockwise rotation of the cyclone and the development of the warm front on the eastern side and the cold front on the western side.
During the formation of a mid-latitude cyclone in the northern hemisphere, the sides of a low-pressure system develop differently. The side of the low-pressure system to the east of the center of the cyclone experiences a stronger pressure gradient force due to the faster movement of the jet stream in that direction. As a result, the air on this side of the low-pressure system rises more rapidly, leading to stronger upward vertical motion and the development of more intense precipitation and thunderstorms. On the other hand, the side of the low-pressure system to the west of the center of the cyclone experiences weaker pressure gradients due to the slower movement of the jet stream in that direction. As a result, the air on this side rises less rapidly and tends to form more stratiform clouds, leading to less intense precipitation and a more gradual decrease in atmospheric pressure. Overall, the different pressure gradients on the two sides of the low-pressure system contribute to the development of a complex weather system that includes a range of precipitation types and wind patterns, as well as changes in temperature and humidity. The exact positioning and strength of these fronts can be influenced by the latitude of the cyclone's formation, as the Coriolis effect is stronger at higher latitudes. In the Northern Hemisphere, the development of a low-pressure system in a mid-latitude cyclone involves the Coriolis effect, which causes winds to move counterclockwise around the low-pressure center. This rotation is due to the Earth's rotation and the variation in latitude, resulting in a distinct pattern of convergence and divergence that shapes the cyclone's structure.
To learn more about western click the link below:
brainly.com/question/29399200
#SPJ11
if you examine the information in the pop-up window for each of these cities, what is different about the cities that could explain difference in average temperature?
The information in the pop-up window for each of these cities may reveal various factors that could explain the difference in average temperature.
For instance, factors such as latitude, altitude, proximity to water bodies, prevailing winds, urbanization, and vegetation cover can all impact the temperature of a city. Therefore, it is essential to examine these variables to understand why some cities may be hotter or cooler than others. By analyzing the information, we may find that cities located near the equator tend to be hotter due to their proximity to the sun's rays, while cities situated at higher altitudes experience cooler temperatures due to the decrease in air pressure. Similarly, cities situated near large water bodies may experience milder temperatures due to the moderating effect of the water, while cities with extensive urbanization and little vegetation cover may experience the urban heat island effect, resulting in higher temperatures.
Learn more about water bodies here https://brainly.com/question/30331315
#SPJ11