Waves from two slits are in phase at the slits and travel to a distant screen to produce the second minimum of the interference pattern. The difference in the distance traveled by the wave is:

Answer:

Using ohms law

The current is found from Ohm's Law.

I = V /R = E /R = Bxy /Rt.

Answer:

31.55° and 148.45°

Explanation:

Formula for calculating the force experiences by the proton placed in a magnetic field is as expressed below;

F = qvBsinθ where;

F is the magnetic force experienced by the proton

q is the charge on the proton

v is the velocity of the proton

B is the magnetic field

θ is the angle between the proton's velocity and the field (Required)

Given parameters

F =  7.00 * 10⁻¹³N

q = 1.602*10⁻¹⁹C

v = 4.80 * 10⁶ m/s

B = 1.74 T

θ  =?

From the formula F = qvBsinθ;

sinθ = F/qvB

sinθ = 7.00 * 10⁻¹³/1.602*10⁻¹⁹* 4.80 * 10⁶*1.74

sinθ =  7.00 * 10⁻¹³/13.38*10⁻¹³

sinθ = 0.5231689 * 10⁰

sinθ = 0.5231689

θ = sin⁻¹0.5231689

θ = 31.55°

The following are the positive values of the angle between 0° and 360°

Sin is positive in the first and second quadrant. In the second quadrant the angle is equal to 180°-31.55° = 148.45°.

Hence the possible values of the angle from smallest to largest are 31.55° and 148.45°

Answer:

absorbent    p = S / c

reflective         p = 2S/c

Explanation:

The moment of radiation on a surface is

          p = U / c

where U is the energy and c is the speed of light.

In the case of a fully absorbent object, the energy is completely absorbed. The energy carried by the light is given by the Poynting vector.

           p = S / c

in the case of a completely reflective surface the energy must be absorbed and remitted, therefore there is a 2-fold change in the process

           p = 2S/c

Answer:

Infrared telescope and camera

Explanation:

An infrared telescope uses infrared light to detect celestial bodies. The infrared radiation is one of the known forms of electromagnetic radiation. Infrared radiation is given off by a body possessing some form of heat. All bodies above the absolute zero temperature in the universe radiates some form of heat, which can then be detected by an infrared telescope, and infrared radiation can be used to study or look into a system that is void of detectable visible light.

Stars are celestial bodies that are constantly radiating heat. In order to see a clearer picture of the these bodies, Infrared images is better used, since they are able to penetrate the surrounding clouds of dust, and have located many more stellar components than any other types of telescope, especially in dusty regions of star clusters like the Trapezium cluster.

Answer:

C) the rope tension is less than the objects weight

Explanation:

According to Newton's Second Law, when an unbalanced or net force is applied to a body, it produces an acceleration in the body in the direction of the net force itself.

In this scenario, we have two forces acting on the object. First is the weight of object acting downward. Second is the tension in the rope acting upwards.

Since, the object is being lowered in the direction of weight. Therefore, weight of the object must be greater than the tension in the rope. So, the net force has the downward direction and the object is lowered. Hence, the correct option is:

C) the rope tension is less than the objects weight

Answer: B. The copper wire (resistance 0.1)

Explanation: When resistance is in parallel, voltage (V) is the same but current is different for every resistance. Current (i) is related to voltage and resistance (R) by Ohm's Law

i = [tex]\frac{V}{R}[/tex]

So, since both wires are in parallel, they have the same voltage but because the copper wire resistance is smaller than Nichrome wire, the first's current will be bigger.

Every resistor in a circuit dissipates electrical power (P) that is converted into heat energy. The dissipation can be found by:

P = [tex]i^{2}*R[/tex]

As current for copper wire is bigger than nichrome, power will be bigger and it will dissipate more heat.

In conclusion, the copper wire will dissipate more heat when connected in parallel.

Answer:

A) W = 103.55 N

B) mass of displaced water = 4186 g

C) W_displaced water = 41.06 N

D) Buoyant force = 41.06 N.

E) ZERO

F) 62.54 N

Explanation:

We are given;

mass of statuette;m = 10,566 g = 10.566 kg

volume = 4,064 cm³

Density of seawater;ρ = 1.03 g/mL = 1.03 g/cm³

A) The dry weight of the statuette can be calculated as;

W = mg

So;

W = 10.556 × 9.81

W = 103.55 N

B) Mass of displaced water is calculated from;

Density = mass/volume

So, mass = Density × Volume

m = 1.03 × 4,064 = 4186 g

C) Weight of displaced water is given by;

W_displaced water = (m_displaced water) × g

W_displaced water = 4.186 kg × 9.81 m/s^2 = 41.06 N

D) The buoyant force is the same as the weight of the displaced water.

Thus, Buoyant force = 41.06 N.

E) The apparent weight of the statuette is calculated from;

Apparent weight = Dry weight - Weight of displaced water

Apparent weight = 103.6 N - 41.06 N = 62.54 N. It is sitting on the bottom of the sea, so the sea floor is providing an opposite force that is equal but opposite the weight so that the net force on the statuette is zero. Since It has zero acceleration, in any direction, hence the net force on it is zero.

F. From E above, The Force required to lift the statuette = 62.54 N

Answer:

Body inertia I = 4.5 kg/m^2

Explanation:

Here, we want to calculate the body inertia when the arms are stretched outwards.

We know from the question that angular momentum is conserved

Thus;

I * 3 = 4.5 * 3

I = 4.5 kg/m^2

Answer:

Explanation:

correct options

a ) Their electrical potential energy keeps decreasing

Actually as they move apart , their electrical potential energy decreases due to increase of distance between them and kinetic energy increases

so a ) option is correct

b ) Their acceleration keeps decreasing

As they move apart , their mutual force of repulsion decreases due to increase of distance between them so the acceleration decreases .

c ) c. Their kinetic energy keeps increasing

Their kinetic energy increases because their electrical potential energy decreases . Conservation of energy law will apply .

The moving apart should be true statements:

a. The electrical potential energy should be reduced.

b. The acceleration should be reduced.

c. The kinetic energy should be increased.

At the time when the moving part, there is the reduction of the electric potential energy because there is a rise in the distance due to which the increment of the kinetic energy.  The reduction of the mutual force of repulsion because of increment in the distance due to this the acceleration should be reduced. There is the increase in the kinetic energy due to the reduction of the electrical potential energy. here the law of conversation of energy should be applied.

Learn more about energy here: https://brainly.com/question/10658188

Answer:

The maximum emf induced in the loop is 0.132 Volts

Explanation:

Given;

radius of the circular loop, r = 9.5 cm

intensity of the wave, I = 0.0295 W/m²

wavelength, λ = 6.40 m

The intensity of the wave is given as;

[tex]I = \frac{B_o^2*c }{2\mu_o}[/tex]

where;

B₀ is the amplitude of the field

c is the speed of light = 3 x 10⁸ m/s

μ₀ is permeability of free space = 4π x 10⁻⁵ m/A

[tex]I = \frac{B_o^2*c }{2\mu_o}\\\\B_o^2 = \frac{I*2\mu_o}{c} \\\\B_o^2 = \frac{0.0295*2*4\pi*10^{-7}}{3*10^8} \\\\B_o^2 = 2.472 *10^{-16}\\\\B_o = \sqrt{2.472 *10^{-16}}\\\\ B_o = 1.572*10^{-8} \ T[/tex]

Area of the circular loop;

A = πr²

A = π(0.095)²

A = 0.0284 m²

Frequency of the wave;

f = c / λ

f = (3 x 10⁸) / (6.4)

f = 46875000 Hz

Angular velocity of the wave;

ω = 2πf

ω = 2π(46875000)

ω = 294562500 rad/s

The maximum induced emf is calculated as;

emf = B₀Aω

       = (1.572 x 10⁻⁸)(0.0284)(294562500)

       = 0.132 Volts

Therefore, the maximum emf induced in the loop is 0.132 Volts

Answer:

Explanation:

Magnetic field at a a point R distance away

B = μ₀ / 4π X 2I / R where I is current

Magnetic field due to one current

=  10⁻⁷ x 2 x 24 / 1 x 10⁻³

48 x 10⁻⁴ T

Magnetic field due to other current

=  10⁻⁷ x 2 x 24 / 3x 10⁻³

16 x 10⁻⁴ T

Total magnetic field , as they act in opposite direction, is

= (48 - 16 ) x 10⁻⁴

32 x 10⁻⁴ T .

Answer:

The refractive index of fluid 2 is 1.78

Explanation:

Refractive index , n = real depth/apparent depth

For the first fluid, n = 1.37 and apparent depth = 9.00 cm.

The real depth of the container is thus

real depth = n × apparent depth = 1.37 × 9.00 cm = 12.33 cm

To find the refractive index of fluid index of fluid 2, we use the relation  

Refractive index , n = real depth/apparent depth.

Now,the real depth = 12.33 cm and the apparent depth = 6.86 cm.

So, n = 12.33 cm/6.86 cm = 1.78

So the refractive index of fluid 2 is 1.78

Since the same container is used, real depth of fluid 1 is equal to the real depth of fluid 2. The index of refraction of the second fluid is 1.8

Given that a container is filled with fluid 1, and the apparent depth of the fluid is 9.00 cm. The container is next filled with fluid 2, and the apparent depth of this fluid is 6.86 cm. If the index of refraction of the first fluid is 1.37,

Then,

Index of refraction = [tex]\frac{Real depth}{Apparent depth}[/tex]

Real depth = Index of refraction x apparent depth

Since the same container is used, we can make an assumption that;

real depth of fluid 1 = real depth of fluid 2

That is,

1.37 x 9 = n x 6.86

Where n = Index of refraction for the second fluid.

make n the subject of formula

n = 12.33 / 6.86

n = 1.79

Therefore, the index of refraction of the second fluid is 1.8 approximately.

Learn more about refraction here: https://brainly.com/question/10729741

Answer:

The rate at which the magnetic field changes is  [tex]\frac{\Delta B }{\Delta t } = - 5.33*10^{-3} \ T/ s[/tex]

Explanation:

From the question we are told that

   The  electric field strength is [tex]E = 4.0 mV/m = 4.0 *10^{-3} V/m[/tex]

   The  radius of the  circular region where the electric field is induced is

   [tex]d = 1.5 \ m[/tex]

Generally the induced electric field is mathematically represented as

     [tex]E = - \frac{r}{2} * \frac{\Delta B }{\Delta t }[/tex]

The  negative sign show that the induced electric field is acting in opposite direction to the change in magnetic field

Where  [tex]\frac{\Delta B }{\Delta t }[/tex] is the change in magnetic field

So  

       [tex]\frac{\Delta B }{\Delta t } = - \frac{2 * E }{r}[/tex]

substituting values

       [tex]\frac{\Delta B }{\Delta t } = - \frac{2 * 4.0 *10^{-3}}{ 1.5 }[/tex]

       [tex]\frac{\Delta B }{\Delta t } = - 5.33*10^{-3} \ T/ s[/tex]

Answer:

a) Em= K +U,  b) Em= K

Explanation:

The system in this case is formed by the mobilizes and the hill.

Let's write the expressions correctly and completely.

a) When the car moves in the path, the mechanical energy is the siua of the kinetic energy of the car and the potential energy of the car when going up the hill.

              Em = K + U

be) when the car moves in the flat part all the mechanical energy is formed by its kinetic energy that is calculated with the mass and speed of the car

             Em = K

c) When the car goes up the hill the energy the mechanical energy is conserved, but part of the kinetic energy is transformed into potential energy.

Answer:

leaves

kinetic energy

mass

potential energy

mass

Explanation:

Answer:

Explanation:

The greatest speed is attained at middle point or equilibrium point or where displacement from equilibrium point is zero .

When the object remains at one of the extreme point it experiences greatest acceleration but at that point velocity is zero . Due to acceleration , its velocity goes on increasing till it come to equilibrium point . At this point acceleration becomes zero . After that its velocity starts decreasing because of negative acceleration . Hence at middle point velocity is maximum .

The greatest acceleration is attained at maximum displacement or at one of the two extreme end .

Greatest restoring force too will be at position where acceleration is maximum because acceleration is produced by restoring force .

Restoring force is proportional to displacement or extension against restoring force . So it will be maximum when displacement is maximum .

Zero restoring force exists at equilibrium position or middle point or at point where displacement is zero . It is so because acceleration at that point is zero .

Answer:

The force is 86.5×10^9 N towards the negative charge (to the right)

Explanation:

The electrostatic force on the charges is given by Coulomb's law;

F= Kq1q2/r^2

This an inverse square law.

F= electrostatic force on the charges

K= constant of Coulomb's law

q1 and q2= magnitude of the charges

Since K= 9.0×10^9Nm^2C^2

F= 9.0×10^9 × 5 × 3/(1.25)^2 = 135×10^9/1.56

F= 86.5×10^9 N

The force is 86.5×10^9 N towards the negative charge.

Answer:

Plss see attached file

Explanation:

Complete question:

A solenoid of length 2.40 m and radius 1.70 cm carries a current of 0.190 A. Determine the magnitude of the magnetic field inside if the solenoid consists of 2100 turns of wire.

Answer:

The magnitude of the magnetic field inside the solenoid is 2.089 x 10⁻⁴ T.

Explanation:

Given;

length of solenoid, L = 2.4 m

radius of solenoid, R = 1.7 cm = 0.017 m

current in the solenoid, I = 0.19 A

number of turns of the solenoid, N = 2100 turns

The magnitude of the magnetic field inside the solenoid is given by;

B = μnI

Where;

μ is permeability of free space = 4π x 10⁻⁷ m/A

n is number of turns per length = N/L

I is current in the solenoid

B = μnI = μ(N/L)I

B = 4π x 10⁻⁷(2100 / 2.4)0.19

B = 4π x 10⁻⁷ (875) 0.19

B = 2.089 x 10⁻⁴ T

Therefore, the magnitude of the magnetic field inside the solenoid is 2.089 x 10⁻⁴ T.

Answer:

a) 2.278 x 10^-5 volts

b) 1.139 x 10^-6 Ampere

c) 2.59 x 10^-11 W

Explanation:

The radius of the wire r = 2 mm = 0.002 m

the number of turns N = 200 turns

direction of the magnetic field ∅ = 25°

magnetic field strength B = 0.02 T

varying time = 2 sec

The cross sectional area of the wire = [tex]\pi r^{2}[/tex]

==> A = 3.142 x [tex]0.002^{2}[/tex] = 1.257 x 10^-5 m^2

Field flux Φ = BA cos ∅ = 0.02 x 1.257 x 10^-5 x cos 25°

==> Φ = 2.278 x 10^-7 Wb

The induced EMF is given as

E = NdΦ/dt

where dΦ/dt = (2.278 x 10^-7)/2 = 1.139 x 10^-7

E = 200 x 1.139 x 10^-7 = 2.278 x 10^-5 volts

b) If the two ends are connected to a resistor of 20 Ω, the current through the resistor is given as

[tex]I[/tex] = E/R

where R is the resistor

[tex]I[/tex] = (2.278 x 10^-5)/20 = 1.139 x 10^-6 Ampere

c) power delivered to the resistor is given as

P = [tex]I[/tex]E

P = (1.139 x 10^-6) x (2.278 x 10^-5) = 2.59 x 10^-11 W

Answer:

The factors include age and puberty

Explanation:

Glandular secretion release chemicals such as hormones in response to the body’s metabolic needs.

As an individual ages , the metabolic rate of the body also reduces . This is due to the stress and ageing of the cells of the body. This explains why glandular secretion is optimal with young people and Lower in older people. It also explains why the immune system of a young person is mostly stronger than older people.

Puberty is another factor which affects glandular secretion as during puberty there is usually a high amount of hormonal changes due to high levels of secretions of some hormones. These hormones could however inhibit the other glandular secretions.

Answer: C

Frictional force

Explanation:

The description of the question above is an example of a circular motion.

For a car travelling in a curved path, the frictional force between the tyres and the road surface will provide the centripetal force.

Since the road is banked, and the cross section of the banked road is constructed like a ramp. The car drives transversely to the slope of the ramp, so that the wheels of one side of the car are lower than the wheels on the other side of the car, for cornering the banked road, the car will not rely only on the frictional force.

Therefore, the correct answer is option C - the frictional force.

Answer:

C) 200 m/s

Explanation:

The sound travels a total distance of 360 m in 0.03 minutes.

v = (360 m) / (0.03 min × 60 s/min)

v = 200 m/s

Answer:

t = 2.95 min

Explanation:

Given that,

The diameter of flywheeel, d = 1.5 m

Mass of flywheel, m = 250 kg

Initial angular velocity is 0

Final angular velocity, [tex]\omega_f=1200\ rpm = 126\ rad/s[/tex]

We need to find the time taken by the flywheel to each a speed of 1200 rpm if it starts from rest.

Firstly, we will find the angular acceleration of the flywheel.

The moment of inertia of the flywheel,

[tex]I=\dfrac{1}{2}mr^2\\\\I=\dfrac{1}{2}\times 250\times (0.75)^2\\\\I=70.31\ kg-m^2[/tex]

Now,

Let the torque is 50 N-m. So,

[tex]\alpha =\dfrac{\tau}{I}\\\\\alpha =\dfrac{50}{70.31}\\\\\alpha =0.711\ rad/s^2[/tex]

So,

[tex]t=\dfrac{\omega_f-\omega_i}{\alpha }\\\\t=\dfrac{126-0}{0.711}\\\\t=177.21\ s[/tex]

or

t = 2.95 min

Answer:

[similar to]

Explanation:

it is the missing word

Answer:

  R = v √(2h / g)

Explanation:

This exercise can be solved using the concepts of science, projectile launching

let's calculate the time it takes to get to the water

           y = y₀ +[tex]v_{oy}[/tex] t - ½ g t²

as the stone is skipped the vertical speed is zero

           y = y₀ - ½ g t²

for y=0

           t = √ (2y₀ / g)

the horizontal distance it covers in this time is

           R = v₀ₓ t

            R = v₀ₓ √(2 y₀ / g)

let's call the horizontal velocity as v and the height is h

            R = v √(2h / g)

Answer:

(a) D.  Zero.

(b) C.  Equal to the battery's terminal voltage.

Explanation:

The question is incomplete, see the complete question for your reference and information.

A resistor and a capacitor are connected in series across an ideal battery having a constant voltage

across its terminals. At the moment contact is made with the battery

(a) the voltage across the capacitor is

A) equal to the battery's terminal voltage.

B) less than the battery's terminal voltage, but greater than zero.

C) equal to the battery's terminal voltage.

D) zero.

(b) the voltage across the resistor is

A) equal to the battery's terminal voltage.

B) less than the battery's terminal voltage, but greater than zero.

C) equal to the battery's terminal voltage.

D) zero

A RC circuit is a circuit that is composed of both resistors and capacitors connect to a source of current or voltage.

basically when a voltage source is applied to an RC circuit, the capacitor, C charges up through the resistance, R

Answer:

Δx = 9 x 10⁻³ m = 9 mm

Explanation:

The formula for fringe spacing in Young's Double Slit Experiment is given as follows:

Δx = λL/d

where,

Δx = fringe spacing = ?

λ = wavelength of light = 450 nm = 450 x 10⁻⁹ m

L = Distance between slits and screen = 2 m

d = distance between slits = 0.1 mm = 0.1 x 10⁻³ m

Therefore,

Δx = (450 x 10⁻⁹ m)(2 m)/(0.1 x 10⁻³ m)

Δx = 9 x 10⁻³ m = 9 mm

Answer:

Explanation:

a )

This type of spectrum is called line emission spectrum . Because it consists of lines . It is emission spectrum because it is due to emission of radiation from a source .

b ) The wavelength of a photon  is inversely proportional to its energy .  Photon  due to transition between n = 1 and n = 3 will have higher energy than

that due to transition between n = 2 and n = 5 . So the later photon ( B)  will have greater wavelength or photon  due to transition between n = 2 and n = 5 will have greater wavelength .

Answer:

The induced  emf is  [tex]\epsilon =7.68 \ V[/tex]

Explanation:

From the question we are told that

     The number of turns is  [tex]N = 1300 \ turns[/tex]

    The diameter is  [tex]d = 2.2 \ cm = 2.2*10^{-2}[/tex]

     The initial magnetic field is  [tex]B_i = 0.14 \ T[/tex]

      The final magnetic field is  [tex]B_f = 0 \ T[/tex]

      The  time taken is  [tex]dt = 9.0ms = 9.0*10^{-3} \ s[/tex]

The radius is mathematically evaluated as

      [tex]r = \frac{d}{2 }[/tex]

substituting values

     [tex]r = \frac{2.2 *10^{-2}}{2 }[/tex]

     [tex]r = 1.1*10^{-2} \ m[/tex]

The induced emf is mathematically represented as

    [tex]\epsilon =- N * \frac{d\phi }{dt }[/tex]

Where  [tex]d\phi[/tex] is the change in magnetic field which is mathematically represented as

        [tex]d\phi = dB * A * cos\theta[/tex]

=>   [tex]d\phi = [B_f - B_i ] * A * cos\theta[/tex]

Here  [tex]\theta = 0[/tex] given that the axis of the coil is parallel to the field

Also A is the cross-sectional area which is mathematically represented as

       [tex]A = \pi r^2[/tex]

substituting values

      [tex]A = 3.142 * [1.1*10^{-2}]^2[/tex]

       [tex]A = 3.8 *10^{-4] \ m^2[/tex]

So

    [tex]d\phi = [0 - 0.14 ] * 3.8*10^{-4}[/tex]

    [tex]d\phi = -5.32*10^{-5} \ weber[/tex]

So  

     [tex]\epsilon =- 1300 * \frac{-5.32*10^{-5} }{ 9.0*10^{-3} }[/tex]

    [tex]\epsilon =7.68 \ V[/tex]