w
х
2. Identify the correct statement about the diagrams above.
O Y represents a mixture and Z represents an element.
O Y represents an compund and X represents a pure substance.
O X represents a mixture and W represents a pure substance
O W represents an element and Y represents a mixture.

Answer:

when your heart rate is not high than normal or lower than normally

Explanation:

Recovery heart rate is when your heart recovers from a certain heart rate eg high heart rate or even low heart rate this means you heart is now functioning normally .

Answer:

Number of beats per minute the heart drops after exercise.

=========================================

Explanation:

If the force is kept the same, but the mass was decreased, then the car will travel further. The less mass an object has, the less inertia it has. Inertia is the tendency for the object to stay at rest if it's initially at rest (or the tendency for the object to stay in motion if already in motion).

If the mass is kept the same, but the force was increased, then the object will travel further than before. The same idea applies as discussed in the last paragraph.

------

If the force was decreased and mass kept the same, then there is less push, which results in the object traveling a shorter distance. If the mass is increased but the force kept the same, then the object moves a shorter distance because there's more inertia to overcome. There are more particles needed to be moved and they resist motion if at rest.

Answer:

D) A magnesium atom donates two electrons to the fluorine atoms → Each fluorine atom accepts one of the electrons → The magnesium atom becomes a +2 ion → Each fluorine atom becomes a -1 ion

Explanation:

sorry if its a bit late

The correct steps in the formation of an ionic bond are A magnesium atom donates two electrons to the fluorine atoms → Each fluorine atom accepts one of the electrons → The magnesium atom becomes a +2 ion. The correct option is D.

The electrical attraction between two ions with opposing charges creates an ionic bond, also known as an electrovalent bond, in a chemical molecule.

Ionic compounds are created by ionic bonds, while covalent bonds create covalent compounds. Ionic bonds are created by a complete transfer of electrons, whereas covalent bonds are created by sharing electrons.

Covalent bonds are weaker than ionic ones. Ionic compounds have higher melting and boiling points.

Therefore, the correct option is D.

To learn more about ionic bonds, refer to the link:

https://brainly.com/question/9075398

#SPJ2

Answer: b

Explanation:

Answer:

Semen is the most important thing in the life cycle of life

Answer:

an electro magnet is technology contain at least one permanent magnet

Answer:

the gaseous phase of water

Explanation:

"It is one state of water within the hydrosphere. Water vapor can be produced from the evaporation or boiling of liquid water or from the sublimation of ice. "

hope this helps!!

Water vapor is a greenhouse gas.

I know this is a simple answer, but I sincerely hope this helped!

Answer:

Axial and Appendicular Skeletons The axial skeleton forms the central axis of the body and consists of the skull, vertebral column, and thoracic cage. The appendicular skeleton consists of the pectoral and pelvic girdles, the limb bones, and the bones of the hands and feet. Figure 6.41.

Explanation:

Answer:

The table is 2.08 m high

Explanation:

Horizontal Motion

When an object is thrown horizontally with a speed vo from a height h, the range or maximum horizontal distance traveled by the object can be calculated as follows:

[tex]\displaystyle d=v\cdot\sqrt{\frac {2h}{g}}[/tex]

If we know the range d = 0.15 m and the speed v = 0.23 m/s, we can solve the above equation for h:

[tex]\displaystyle h=\frac{d^2\cdot g}{2v^2}[/tex]

[tex]\displaystyle h=\frac{0.15^2\cdot 9.8}{2\cdot 0.23^2}[/tex]

[tex]\boxed{h=2.08\ m}[/tex]

The table is 2.08 m high

Answer:

Hyoid

Explanation:

The hyoid is located in the neck area, not the limbs.

Answer:

For C is B and for D is A

Explanation:

B because that's where the b car will do all the force to go up, and A because there the car doesn't have to do any force other than the natural, and it already brings that on it's own.

Answer:

A.) 17.04 N

B.) 10.76 m/s^2

Explanation:

Given that a 2kg block is acted on by two forces F1 and F2 as shown in the diagram. If the magnitude of F1 = 13N and F2 = 11N. If the coefficient of kinetic friction is .23,

A.) To find the normal force exerted on it by the floor, we need to first calculate the vertical forces of the ropes.

The vertical force on F1 = 13 sin 30

F1 = -6.5 N

The vertical force on F2 = 11 sin 21

F2 = 3.94

The resultant force = - 6.5 + 3.94

Resultant force = - 2.56

The normal force = mg - 2.56

The normal force = 2 × 9.8 - 2.56

The normal force = 19.6 - 2.56

The normal force = 17.04 N

(B) The acceleration on of the block will be achieved by first calculating the horizontal force.

For F1 = 13Cos 30

F1 = 11.26N

For F2 = 11 cos 21

F2 = 10.27

the resultant force = 11.26 + 10.27

Horizontal force = 21.53N

Force = mass × acceleration

21.53 = 2 × a

a = 21.53 / 2

Acceleration a = 10.76 m/s^2

Answer:

The answer is below

Explanation:

Given that the mass of the sculpture (m) = 6.2 kg, [tex]\theta_1=12.67^o,\theta_2=16.15^o[/tex]

[tex]Sum\ of\ horizontal\ force\ is\ zero\ hence:\\\\T_1cos(\theta_1)=T_2cos(\theta_2)\\\\T_1=\frac{T_2cos(\theta_2)}{cos(\theta_1)}\\ \\Sum\ of\ vertical\ force\ is\ zero:\\\\T_1sin(\theta_1)+T_2sin(\theta_2)=mg\\\\\frac{T_2cos(\theta_2)}{cos(\theta_1)}sin(\theta_1)+T_2sin(\theta_2)=mg\\\\T_2=\frac{mg}{\frac{cos(\theta_2)}{cos(\theta_1)}sin(\theta_1)+sin\theta_2} \\\\T_2=\frac{6.2*9.81}{\frac{cos(16.15)}{cos(12.67)}sin(12.67)+sin16.15} =123.1\ N\\\\[/tex]

[tex]T_1=\frac{T_2cos(\theta_2)}{cos(\theta_1)}=121.2\ N[/tex]

Answer:

[tex]a=100\ m/s^2[/tex]

Explanation:

Given that,

Initial velocity, u = -2 m/s

Final velocity, v = =.5 m/s

Time, t = 0.025 s

We need to find the rate of acceleration of a hammer. Acceleration is equal to the change in velocity divided by the time taken.

[tex]a=\dfrac{v-u}{t}\\\\a=\dfrac{0.5-(-2)}{0.025}\\\\a=100\ m/s^2[/tex]

So, the acceleration of the jet is [tex]100\ m/s^2[/tex].

The kinetic energy of a body determines it's level of impact on the object in which it comes in contact with. Hence, the much larger kinetic energy exhibited by a wrecking ball compared to a yo-yo means that is has a much larger impact on a building than a yo-yo.

The kinetic energy of a body is a factor of it's velocity and mass as they are directly proportional.

The wrecking ball has a very large mass which is thousands of times larger than that of a yo-yo. Also, the velocity at which a wrecking ball is launched is higher than the velocity of a yo-yo.

This means that the kinetic energy of a wrecking ball is much higher than that of yo-yo. Hence, having much greater impact on a building compared to a yo-yo.

Learn more :https://brainly.com/question/18565597

Answer:

loyalty

Explanation:

Answer:

stratosphere

Explanation:

In the stratosphere, temperature increases with altitude. The stratosphere contains the ozone layer, which protects the planet from the Sun's harmful UV radiation.

Stratosphere is the atmospheric layer which gets warmer as the altitude increases and contains the ozone layer.

The stratosphere is a layer of the Earth's atmosphere. It is the second layer of the atmosphere as we go upward into the atmosphere height. The troposphere is the lowest layer of the globe, which is present right below the stratosphere. The next higher layer of the atmosphere above the stratosphere is the mesosphere.

In the stratosphere layer, the temperature increases with the increase in the altitude range. The stratosphere layer contains the ozone layer, which works in the protection of the planet from the Sun's harmful ultraviolet radiations which could lead to cancer.

Learn more about Stratosphere here:

https://brainly.com/question/13497783

#SPJ6

Answer:

grams= 4.8e-5

kilograms= 4.8e-8

centigrams= 0.0048

dekagrams= 4.8e-6

Explanation:

Answer:

nononononononononononononnn

Explanation:

Answer:

Read below to understand

Explanation:

acceleration = change in velocity / change in time

(a = v/t)

You have acceleration and time given so you need to rearrange the equation to solve for velocity

V = a * t

V = 2 * 5

Velocity is 10 m/s

Answer:

15

Explanation:

Answer:

The angular momentum of a cylinder, when it is rotating with constant angular velocity is Lini =Iωi

. When two cylinders are added to the rotating cylinder, which are identical in their dimensions, the moment of inertia of the entire system increases (since mass increases). The final moment of inertia will be 3I

Since friction exist, all the cylinders start rotating with same angular velocity, the new angular velocity can be calculated using conservation of angular momentum

Thus, Iωi =3Iωf ⟹ωf =ωi/3 = 0.33ωi

Answer:

You need the definition of acceleration (a=Vf-Vi/t) and 1 equation of linear motion (deltaX = Vi×t + 1/2×a×t^2). Since you know a is constant (gravity) and you know your initial Vi to be 40 m/s and your final velocity Vf to be zero (maximum height), then you can use thhe definition of acceleration to find time.

-9.81m/s^2 = (0-40m/s)/t

t = (-40)/(-9.81) s

t = 4.077s

Now that you have time, you should know all but deltaX in the equation of linear motion.

dX = (40m/s)(4.077s) + (1/2)(-9.81m/s^2)(4.077s)^2

dX = (163.099m) — (81.549m)

dX = 81.55m

Answer:

equal, opposite

Explanation:

Newton’s third law says that every time there is an interaction force, there is also a force that is equal in size and acts in the opposite direction .

Answer:

Since the astronaut drops the rock, the initial velocity of the rock is 0 m/s

We are given:

initial velocity (u) = 0 m/s

final velocity (v) = v m/s

acceleration (a) = 1.62 m/s/s

height (h) = 1.25 m

Solving for v:

From the third equation of motion:

v²-u² = 2ah

replacing the variables

v² - (0)² =2 (1.62)(1.25)

v² = 1.62 * 2.5

v² = 4 (approx)

v = √4

v = 2 m/s

The speed of the rock just before it lands is 2 m/s

When an underwater sound source emits waves of frequency 30 kHz in all directions, the intensity of the waves (in Watts/m2) vary with distance r from the source by the relation 1/r²

As the intensity mechanical sound wave is inversely proportional to the square of the distance from the source, therefore the correct option is B.

Wavelength can be understood in terms of the distance between any two similar successive points across any wave for example wavelength can be calculated by measuring the distance between any two successive crests.

It is the total length of the wave for which it completes one cycle.

The intensity of a mechanical wave is inversely proportional to the square of the distance from the source.

An underwater sound source emits waves of frequency of 30 kHz in all directions, the intensity of the waves (in Watts/m2) varies with distance r from the source by the relation 1/r², therefore the correct option is B.

Learn more about wavelength from here

brainly.com/question/7143261

#SPJ2