What does the upper part of a YOUNGER
mountain top look like?.
A. a flattened pancake
B. it has a flat side
C. the top becomes rounded due to erosion
D. it has sharp peaks

Answer:

his type of shock is called inelastic

Explanation:

This exercise is for vehicle crashes, which corresponds to exercise is momentum conservation.

We must begin by defining a system formed by the two cars so that the forces during the crash have been intense and the moment is preserved.

Looking for the moments

initial. Before the crash

           p₀ = m₁ v₁₀

final. After the crash

           p_f = (m₁ + m₂) v

the conservation of the moment is written

           p₀ = p_f

           m₁ v₁₀ = (m₁ + m₂) v

This type of shock is called inelastic and has the characteristics that the kinetic energy is not conserved.

Answer:

Rain came along with lower temps

Explanation:

There was no rain on the warmer days

There were more clouds as the week went on

and the temp decreased during the week so rain came with lower temps is the only one that can be correct

Answer:

Refraction is another way that waves interact with matter. ... Waves bend as they enter a new medium because they start traveling at a different speed in the new medium. For example, light travels more slowly in water than in air. This causes it to refract when it passes from air to water or from water to air.

Explanation:

i hope this helps but if it doesnt im rlly srry :p

Answer:

A. Transformer

Explanation:

it’s correct

Answer:

B

Explanation: Given that an elevator moving down passes its neighbor, an elevator moving up. Their speed relative to one another is 8 m/s. What is the velocity of each elevator relative to someone standing on the first floor? Assume that the elevators are traveling at the same speed, and that the upward direction is positive.

O Both elevators are moving at 8 m/s.

y Falling Objects

O One elevator is moving at 4 m/s; the other elevator is moving at -4 m/s.

O Both elevators are moving at 4 m/s.

tive Velocity

O One elevator is moving at 8 m/s; the other elevator is moving at -8 m/s.

Solution.

Since the upward direction is positive, the downward direction will be negative.

For their speed relative to one another to be 8 m/s, the individual velocity will be:

4 - ( - 4 ) = 8

Therefore, the correct answer is:

One elevator is moving at 4 m/s; the other elevator is moving at -4 m/s

Which is option B

Because the negative sign multiply by negative sign will give positive.

That is,

4 + 4 = 8

Answer:

dT(t)/dt = k[T5 - T(t)]

Explanation:

Since T(t) represents the temperature of the object and T5 represents the temperature of the surroundings, according to Newton's law of cooling, the rate at which an object's temperature changes is directly proportional to the difference in temperature between the object and the surrounding medium, that is dT(t)/dt ∝ T5 - T(t)

Introducing the constant of proportionality

dT(t)/dt = k[T5 - T(t)]

which is the desired differential equation

Answer:

dT/dt = k[T5 - T]

Explanation:

DT/dt represents rate of change in temperature for Celsius degrees per hour. Its proportional to the difference in temperature between the object and the Surrounding medium. This means either dT/Dt =k (T-TS) or dT/dt=k(TS-T) with k being some positive constant of proportionality which depends on the object.

We can see that dT/dt = k(T-T5) has temperature increasing when the temperature of the object T is greater than the surrounding medium (T5).

The equation dT/dt=k(T5-T) has the temperature increasing when the object (T) is less than the temperature of the surrounding medium. Therefore the differential equation best describing the rate of change in temperature of the object is dT/dt=k(T5-T) for some positive constant of proportionality k.

Answer:

The boiling point temperature of this substance when its pressure is 60 psia is  480.275 R

Explanation:

Given the data in the question;

Using the Clapeyron equation

[tex](\frac{dP}{dT} )_{sat } = \frac{h_{fg}}{Tv_{fg}}[/tex]

[tex](\frac{dP}{dT} )_{sat } = \frac{\frac{H_{fg}}{m} }{T\frac{V_{fg}}{m} }[/tex]

where [tex]h_{fg[/tex] is the change in enthalpy of saturated vapor to saturated liquid ( 250 Btu

T is the temperature ( 15 + 460 )R

m is the mass of water ( 0.5 Ibm )

[tex]V_{fg[/tex] is specific volume ( 1.5 ft³ )

we substitute

[tex](\frac{dP}{dT} )_{sat } =( \frac{250Btu\frac{778Ibf-ft}{Btu} }{0.5})[/tex] / [tex]( (15+460)\frac{1.5}{0.5})[/tex]  

[tex](\frac{dP}{dT} )_{sat } =[/tex] 272.98 Ibf-ft²/R

Now,

[tex](\frac{dP}{dT} )_{sat } =[/tex] [tex](\frac{P_2 - P_1}{T_2 - T_1})_{sat[/tex]

where P₁ is the initial pressure ( 50 psia )

P₂ is the final pressure ( 60 psia )

T₁ is the initial temperature ( 15 + 460 )R

T₂ is the final temperature = ?

we substitute;

[tex]T_2[/tex] [tex]= ( 15 + 460 ) + \frac{(60-50)psia(\frac{144in^2}{ft^2}) }{272.98}[/tex]

[tex]T_2 = 475 + 5.2751\\[/tex]

[tex]T_2 =[/tex] 480.275 R

Therefore, boiling point temperature of this substance when its pressure is 60 psia is  480.275 R

Answer:

D

Explanation:

Given that one rock is thrown upward at 4.5 m/s and another thrown downward at 3.4 m/s. What is the relative velocity of the first rock

from the perspective of the second rock? Assume that up is positive.

Solution.

Since both of them are moving in the opposite direction, the relative velocity of the first rock from the perspective of the second rock will be

Relative velocity = 3.4 - 4.5

Relative velocity = - 1.1 m/s

Therefore, the relative velocity from the perspective of the second rock is negative 1.1 m/s.

The correct answer is option D.

Answer:

1)   F = 8.789 10² N, 2)   F = 1.5 10⁴ N

Explanation:

We can solve this exercise using Coulomb's law

         F =[tex]k \frac{q_1q_2}{r^2}[/tex]

Knowing that charges of the same sign repel

let's apply this equation to our case

1) the charges are q = - 0.0025 C and the distance between them r = 8 m

       we calculate

           F = 9 10⁹ 0.0025 0.0025 /8²

           F = 8.789 10² N

as the two charges are of the same sign the force is repulsive

2) q₁ = -0.004C and q₂ = -0.003 C with a distance of r = 3.0 m

    we calculate

             F = 9 10⁹ 0.004 0.003 / 3²

             F = 1.5 10⁴ N

Answer:962 hz

Explanation: got it right on acellus

The frequency of the siren when the cyclist is stationary will be 963 Hz.

The frequency of a wave is the number of cycles per second.

FRom the doppler effect,

f =f'[ (V+Vs/V-Vo) ]

Here, doppler shifted frequency f' = 894 Hz, Source is stationary, Vs =0. Velocity of observer Vo = 24.5m/s and velocity of sound wave V = 343m/s

Substitute the value into the expression , we get

f = 894 x [(343/343 - 24.5)}

f = 963 Hz

Thus, the frequency of the siren when the cyclist is stationary is 963 Hz.

Learn more about frequency.

https://brainly.com/question/14320803

#SPJ2

Answer:

you Subtract

Explanation:

A = 6

B = 6

C = 0

D = 5

9-3= 6

13-7=6

11-11=0

6-1=5

Simple hope it helps

Answer:

A system of two co-axial cylindersof different diameters which rotate together is called wheel and axle example; the door knob , knob of the tap ,screw driver,water tap

Answer: d

Explanation:

Magnetism is the result of the "spin" of the electron and most of these cancel each other out in larger bodies thus most things not being magnetic.

Answer: The yellow light with a frequency equal to 5.21 x 1014 Hz will have a wavelength of E) 576 nm

Answer:

the uncertainty in the distance measurement is 0.5148

Explanation:

Given the data in the question;

uncertainty in locating the center of the magnet is estimated to be 0.25 cm,

uncertainty in locating the position of the sensor in the phone is estimated to be 0.45 cm,

Using quadrature method, uncertainty in the distance measurement = ?

We know that;

Using  quadrature method, Combined Uncertainty calculated by;

U[tex]_c[/tex] = √( U₁² + U₂² + ........... )

where U₁ is uncertainty in first measurement and U₂ is uncertainty in second measurement, et cetera.

now we substitute;

U[tex]_c[/tex] = √( U₁² + U₂² )

U[tex]_c[/tex] = √( (0.25)² + (0.45)² )

U[tex]_c[/tex] = √( 0.0625 + 0.2025 )

U[tex]_c[/tex] = √( 0.265 )

U[tex]_c[/tex] = 0.5148

Therefore, the uncertainty in the distance measurement is 0.5148

Answer:

The answer is "12388.17"

Explanation:

[tex]l = 2.1 cm = 2.1 \times 10^{-2}\ m\\\\k = 1.00059\\\\\eta = \sqrt{k}= \sqrt{1.00059}\\\\\lambda = 663 nm = 663 \times 10^{-9}\ m[/tex]

Users now know that perhaps the number of fingers the shift is provided when a path difference [tex]\Delta d[/tex] are inserts between both the two arms  

[tex]N = \frac{\Delta d}{\lambda}[/tex]

The optical pull-up in the arm is initially given by

[tex]d = 2\eta l[/tex]

Its new length of the different sense as the reflection coefficient adjustments between [tex]\eta[/tex] (air) and 1 so if we evacuate air from of the arm (vacuum).

The new length of a path is therefore

 [tex]d'' = 2l[/tex]

Therefore, the different path  

[tex]\Delta d=d-d''=2l(\eta -1)[/tex]

So, The fringe shifts number are

[tex]N= \frac{2l(\eta -1)}{\lambda}[/tex]

    [tex]= \frac{2 \times 2.1 \times 10^{-2} (\sqrt{1.00059}-1)}{663 \times 10^{-9}}\\\\=12388.17[/tex]

Answer:

The aswers is C

Explanation:

Answer:

86.8N is the correct answer

Two resistors of resistance 19 ohm each are connected in series.

In series combination, equivalent resistance = 19+19 = 38 ohm

Potential difference = 10 V

V/I = R

I ( current ) = V/R = 10 V / 38 ohm = 0.26 ampere

Answer:

Forces can affect an object.

Balanced forces allow an object to continue moving at a constant motion (law of inertia).

Unbalanced forces cause a change in motion.

Answer:

Because of my physics teacher I would put this entire explanation below if i were u

Explanation:

Forces affect how objects move. They may cause motion; they may also slow, stop, or change the direction of motion of an object that is already moving.

Since force cause changes in the speed or direction of an object, we can say that forces cause changes in velocity. Remember that acceleration is a change in velocity. So forces cause acceleration.

Answer:

1.648 m/s

Explanation:

1 revolution equals 2pi radians.

Calculate the angular velocity by taking 2pi x v, then divide by 60 seconds.

To convert this to m/s, simply take this answer and multiply it by 0.305m (a.k.a. the radius of the circle).

1 revolution is equals 2pi radians. The drier will move 1.648 m/s.

Thus, v = 51.6 rev/ min.

1 revolution = 2 pi radians.

Angular velocity = 2 pi (v)/ 60

                           = 2 *3.14 * 51.6/ 60

                            = 5.404 rad/ seconds.

r = 30.5 cm = 0.305 m

v= ( 5.40) ( 0.305)

v= 1.648 m/s.

Thus, 1 revolution is equals 2pi radians. The drier will move 1.648 m/s.

Learn more about Revolution, refer to the link:

https://brainly.com/question/1291142

#SPJ2

Answer:

It would be false

Explanation:

Lead is more reactive if  thats  what you mean