What factors determine electric potential?
A. Mass and distance
B. Charge and density
C. Charge and distance
O D. Mass and charge

Answer:

The reckage after collision is motionless (E)

Explanation:

The first law of thermodynamics states that energy is neither created nor destroyed but is converted from one form to another.

The kind of collision described in the question above is known as a perfectly inelastic collision, and in this type of collision, the maximum kinetic energy is lost because the objects moving in opposite directions have a resultant momentum that is equal, but in opposite directions hence they cancel each other out.

The calculation is as follows:

m₁v₁ + m₂v₂

where:

m₁ = m₂ = 1000kg

v₁ = 20 m/s

v₂ = -20 m/s ( in the opposite vector direction)

∴ resultant momentum = (1000 × 20) + (1000 × -20)

= 20000 - 20000 = 0

∴ The reckage after collision is motionless

Answer:

The wreckage after collision is moving at the speed 18 m/s to the south.

Explanation:

Explanation:

A plane mirror always creates an image with the same distance to the mirror as the object, only in the other direction. So both of them have a distance of 10cm, one is 10cm to the left, one 10cm to the right, thus their mutual distance is 20cm

Answer:

Bowling ball

Explanation:

Answer:

2500 m

Explanation:

Given that,

Each lap is 500 m

Gareth takes 5 laps.

We need to find distance traveled by Gareth. The distance covered by him is given by :

d = 5×500

d = 2500 m

Hence, he will travel 2500 m.

Answer:

a) False, b) True, c) true, d) true, e) True, g)  False

Explanation:

Se pide que analicemos cada expresión, f) true

a) False.   La  antena vertical tiene cargas eléctricas que se pueden mover en la direccion vertical, una onda electromagnética polarizada horizontal el campo eléctrico esta en la dirección horizontal por lo cual no puede mover los electrones que están en direccional vertical

be) True.  La radiación ultravioleta es absorvidad por la melanina del la piel y crea las quemaduras comunes de insolación.

C) False.  Todas la ondas electromagnetismo viajan en la misma velocidad c

d) True.  La Temperatura del sol es 5800K por lo cual la radiación mas intensa esta en el rango visible

e) True.  Los rayos gamma son de muy alta energía, por lo cual se producen en ransicio0n de los núcleos atmicos.

f) True.  El rango de frecuencia para las onda de radio va desde 500 Kahoy hasta 110 MHz, por lo tanto el rango de longitudes de onda es

           c= lam f

           lam = c/f

           lam = 3 108/500 103

           lam = 6 102 m

           lam = 3 108 / 110 106  

           lam = 2,72 m

los lo ttnato en todo el rango de las frecuecias de radio la lambda> 1 m

g) False.  Todas las ondas electromagnéticas viajan a la misma velocidad c( 3 108m/s)

Answer:

The angle of elevation of the rocket is increasing at a rate of 48.780º per second.

Explanation:

Geometrically speaking, the distance between the rocket and the observer ([tex]r[/tex]), measured in kilometers, can be represented by a right triangle:

[tex]r = \sqrt{x^{2}+y^{2}}[/tex] (1)

Where:

[tex]x[/tex] - Horizontal distance between the rocket and the observer, measured in kilometers.

[tex]y[/tex] - Vertical distance between the rocket and the observer, measured in kilometers.

The angle of elevation of the rocket ([tex]\theta[/tex]), measured in sexagesimal degrees, is defined by the following trigonometric relation:

[tex]\tan \theta = \frac{y}{x}[/tex] (2)

If we know that [tex]x = 5\,km[/tex], then the expression is:

[tex]\tan \theta = \frac{y}{5}[/tex]

And the rate of change of this angle is determined by derivatives:

[tex]\sec^{2}\theta \cdot \dot \theta = \frac{1}{5}\cdot \dot y[/tex]

[tex]\frac{\dot \theta}{\cos^{2}\theta} = \frac{\dot y}{5}[/tex]

[tex]\frac{\dot \theta\cdot (25+y^{2})}{25} = \frac{\dot y}{5}[/tex]

[tex]\dot \theta = \frac{5\cdot \dot y}{25+y^{2}}[/tex]

Where:

[tex]\dot \theta[/tex] - Rate of change of the angle of elevation, measured in sexagesimal degrees.

[tex]\dot y[/tex] - Vertical speed of the rocket, measured in kilometers per hour.

If we know that [tex]y = 4\,km[/tex] and [tex]\dot y = 400\,\frac{km}{h}[/tex], then the rate of change of the angle of elevation is:

[tex]\dot \theta = 48.780\,\frac{\circ}{s}[/tex]

The angle of elevation of the rocket is increasing at a rate of 48.780º per second.

Answer:

9m/s^2

Explanation:

F=ma

a=F/m

a=63/7

a=9m/s^2

Answer:

27 ms^-1

Explanation:

by using v= u + at

u = 0 ( because the object id starting from rest)

v= 0 + 1.5 x 18

v = 27 ms^-1

Answer:

magnetic

Explanation:

because magnetic attracted other magnetic by pulling them contact forcely that creates a strong force when they are nearly close to one another

Answer:

im not sure maybe viberation

Explanation:

Answer:

X-ray waves are transmitted by ....... body tissues with very little absorption

Hope it helps

Please mark me as the brainliest

Thank you

Answer:

2.2 ma

Explanation:

Given :

Length of the rope = L

Mass of the rope = m

Mass of the object pulled by the rope = M

M = 1.5 m

So, L [tex]$\rightarrow$[/tex] m

For unit length [tex]$\rightarrow \frac{m}{L}$[/tex]

∴ 0.3 L = [tex]$0.3 \ L \left(\frac{m}{L}\right)$[/tex]

            = 0.3 m

And for remaining 0.7 L =  [tex]$0.7 \ L \left(\frac{m}{L}\right)$[/tex]

            = 0.7 m

By Newtons law of motion,

F - T = ( 0.3 m) a .........(1)

T = ( M + 0.7 m) a

T = ( 1.5 m + 0.7 m) a

T = ( 2.2 m ) a  ..............(2)

So from equation (1) and (2), we have

Tension on the rope

T = 2.2 ma

Answer:

one of the mjor effects of heat transfer is temperature change

Explanation:

simple answer

Answer:

D because the line isn't changing which means constant speed it's going at the same rate so yea it's D

Answer:

D.

Hope that helps!?

Explanation:

Answer:

m = [tex]\frac{k}{g}[/tex] x,

graph of x vs m

Explanation:

For this exercise, the simplest way to determine the mass of the cylinder is to take a spring and hang the mass, measure how much the spring has stretched and calculate the mass, using the translational equilibrium equation

              F_e -W = 0

              k x = m g

              m = [tex]\frac{k}{g}[/tex] x

We are assuming that you know the constant k of the spring, if it is not known you must carry out a previous step, calibrate the spring, for this a series of known masses are taken and hung by measuring the elongation (x) from the equilibrium position, with these data a graph of x vs m is made to serve as a spring calibration.

  In the latter case, the elongation measured with the cylinder is found on the graph and the corresponding ordinate is the mass

Answer:

[tex]a=0.13m/s^2[/tex]

Explanation:

From the question we are told that

Mass of first team man [tex]m_1=64kg[/tex]

Force of man first team man [tex]F_1=1350[/tex]

Mass of second team man [tex]m_2=69kg[/tex]

Force of man second team man [tex]F_2=1367N[/tex]

Generally the equation for net force F_n is mathematically given by

[tex]F_n=9(m_1+m_2)a[/tex]

[tex]9(m_1+m_2)a=9(f_2-f_1)[/tex]

[tex]9(64+69)a=9(1367-1350)[/tex]

[tex]a=\frac{9(1367-1350)}{9(64+69)}[/tex]

[tex]a=0.127819m/s^2[/tex]

Therefore the acceleration is given by

[tex]a=0.13m/s^2[/tex]

Answer: yes

Explanation:

Answer:

yes

Explanation:

Answer:

Density is affected by volume and mass.

Explanation:

Density is defined as the quantity of mass per unit of volume, or expressed mathematically, d = m/v.

Answer:

the Laws of Thermodynamics

Explanation:

these laws states that no form of energy can be created by anyone or anything, without a previous and equal input of energy being put in, that energy can only be transferred from object to object and through different forms

Example: the way a heater runs to warm up an area, that is the process of electrical energy, or energy stored in propane being converted into heat energy

this law is universally implied and has been proven on multiple accounts to be true, in no way can you create energy out of thin air, all you can do is transform and transfer it

hope this is what you was going for, very good point in science

this is one of two correct answers, the other answer to this question is also correct

Answer:

Nuclear power plant.

Gas stove.

Dam.

Gas pump.

Geothermal heat pump.

Power lines.

Solar panels.

Windmills.

Explanation:

Hope this helps :))

Answer:

gasoline,solar panels,geothermal heat pump,windmills

Explanation:

Answer:

one sec let me think

Explanation:

(a)The average velocity of the ball over the following time intervals will be  [3,4] ft/sec.

(b)The instantaneous velocity at time t = 3 will be32 ft/sec.

(c)The instantaneous velocity at time t = 6 will be -64 ft/sec.

(d)The ball will hit the ground at 13.4 sec.

The change of displacement with respect to time is defined as the velocity.  velocity is a vector quantity. it is a time-based component.

The given data in the question will be ,

u is the initial velocity by which ball thrown=128 ft/sec.

V₃ is the instantaneous velocity at time t=3 sec.

V₆ is the instantaneous velocity at time t=6 sec.

t is the time when ball hits the ground=?

(a) Given equation for the displacement

s(t) =128t-16t²     (on differenting got the velocity )

v(t) = 128-32t

Time when velocity is zero will be

[tex]\rm{ t=\frac{128}{32}[/tex]

[tex]\rm{ t=4 sec[/tex]

If the velocity got in the equation is 128 and 32 ft /sec. it can be only when the average velocity is [3,4] ft/sec .

Hence the average velocity obtained from the problem will be  [3,4] ft/sec

(b)  

s(t) =128t-16t²     (on differenting got the velocity )

v(t) = 128-32t

At time( t=3 sec)

v(3) = 128-32×3

v(3) =32 m/sec.

Hence the instantaneous velocity at time t = 3 will be32 ft/sec.

(c)

s(t) =128t-16t²     (on differenting got the velocity )

v(t) = 128-32t

At time( t=6 sec)

v(6) = 128-32×6

v(6) = -64 m/sec.

Hence the instantaneous velocity at time t = 6 will be -64 ft/sec.

(d)

According to Newtons third equation of motion we got

v=u+gt

If the body returens from a certain height at max height its velocity must be zero; ( u=0)

[tex]\rm t=\frac{(v-u)}{g} \\\\\ \rm t=\frac{(128-0)}{9.81}\\\\\rm t=13.04 sec.[/tex]

Hence the ball will hit the ground at 13.4 sec.

To learn more about the velocity refer to the link ;

https://brainly.com/question/862972

Answer:

Lost Mechanical Power = 7.7565 KW

Head Loss = 26.35 m

Explanation:

First, we will find the useful mechanical power used to transport water to the higher reservoir:

[tex]P_{useful} = \rho ghV[/tex]

where,

P_useful = Useful mechanical Power = ?

ρ = density of water = 1000 kg/m³

g = acceleration due to gravity = 9.81 m/s²

h = height = 45 m

V = Volume flow rate = 0.03 m³/s

Therefore,

[tex]P_{useful} = (1000\ kg/m^3)(9.81\ m/s^2)(45\ m)(0.03\ m^3/s)\\P_{useful} = 13243.5\ W = 13.2435\ KW[/tex]

Now, the lost mechanical power will be:

[tex]Lost\ Mechanical\ Power = Total\ Mechanical\ Power - Useful\ power\\Lost\ Mechanical\ Power = 21\ KW - 13.2435\ KW\\[/tex]

Lost Mechanical Power = 7.7565 KW

Now, for the head loss:

[tex]Lost\ Mechanical\ Power = \rho g(Head\ Loss)V\\Head\ Loss = \frac{Lost\ Mechanical\ Power}{\rho gV} \\\\Head\ Loss = \frac{7756.5\ W}{(1000\ kg/m^3)(9.81\ m/s^2)(0.03\ m^3/s)} \\[/tex]

Head Loss = 26.35 m

Answer:

d

Explanation:

The uneven heating of land and water in coastal areas creates fronts that cause thunderstorms. So, option D is correct.

Heat energy of a system is defined as the energy transferred between the molecules due to the temperature difference between them. Heat energy is the energy responsible for the temperature of the molecules.

Here,

A city near the ocean experiences thunderstorms on a frequent basis. This is because,

The atmosphere near to the land is highly humid and warm and thus creates a relatively low pressure in the land. In order to balance the pressure variation the air from the oceans make movements towards the land, and as a result, sea breeze are formed. During the evenings when the water in the ocean is more warm and when land begins to cool, the air from land rushes towards the sea, in order to balance the pressure variation occurred here. This makes the air above the ocean highly humid and thus would lead to the formation of thunderstorms.

Hence,

The uneven heating of land and water in coastal areas creates fronts that cause thunderstorms.

To learn more about heat energy, click:

https://brainly.com/question/29210982

#SPJ2

Answer:

It's b because he discovered galaxies .

Answer:

I think its object 1

Explanation:

Because the object that has more weight has a greater momentum and the lightest object that has a less momentum will be easier to change because its lighter.

Answer: add 10 cm plus 200 mpa divided by 2 min then caculate that into 160 bars.

Explanation:

a) The relaxation time constant of the polymer is approximately 8.9 min.

b) The viscosity of the dashpot in the Maxwell model is approximately 4.55 GPa s.

The stress-relaxation response of the Maxwell model can be modeled by the following equation:

σ(t) = σ₀ exp(-t/τ)

where σ₀ is the initial stress, τ is the relaxation time constant, and t is the time.

a) The relaxation time constant of the polymer:

σ(2 min) = 160 MPa

σ₀ = 200 MPa

160 MPa = 200 MPa exp(-2 min/τ)

Taking the natural logarithm of both sides, we get:

ln(160/200) = -2 min/τ

Solving for τ, we get:

τ = -2 min / ln(160/200) ≈ 8.9 min

Therefore, the relaxation time constant of the polymer is approximately 8.9 min.

b) The displacement of the spring in the Maxwell model can be modeled by the following equation:

x(t) = (σ₀ / G) (1 - exp(-t/τ))

where G is the shear modulus of the polymer. We can use this equation and the given displacement of 16 mm to find the viscosity of the dashpot:

x(t) = 16 mm = 0.016 m

σ₀ = 200 MPa

τ = 6.09 min = 365.4 s

Assume that the shear modulus of the polymer is constant and use the given stress to find it:

G = σ₀ / γ

where γ is the strain induced by the stretching.

Since the bar was stretched by 16 mm and its original length was 10 cm (i.e., 100 mm), the strain is:

γ = 16 mm / 100 mm = 0.16

Therefore,

G = 200 MPa / 0.16 = 1250 MPa

Now we can solve for the viscosity of the dashpot:

η = σ₀τ / x(t)

= (200 MPa) (365.4 s) / (0.016 m)

≈ 4.55 GPa s

Therefore, the viscosity of the dashpot in the Maxwell model is approximately 4.55 GPa s.

Learn more about the stress-relaxation model here:

https://brainly.com/question/30558828

#SPJ2

Answer: Option b.

Explanation:

We know:

Wavelength = 632.8 nm

Fluence = 4.5*10^20 photon/s

The energy of a single photon of wavelength λ is:

E = (h*c)/λ

where:

h = 6.6*10^(-34) J*s

c = 3*10^8 m/s

And we should rewrite the wave length in meters, so:

λ = 632.8 nm = 632.8*10^(-9) m

replacing these in the energy equation, we get:

E = (6.6*10^(-34)J*s)*(3*10^8 m/s)/(632.8*10^(-9) m) = 3.13*10^(-19) J

So each one of the  4.5x10^20 photon that flow each second have this energy, then the power is:

P = (3.13*10^(-19) J)*(4.5*10^20 /s) = 140.85 J/s

and 1 W = 140.85 J/S

Then the power is:

P = 140.85 W

Then the correct answer is the option b, where the units are a little bit different than mine because I used really simplified values for c and h.