Answer:
When the electrons in the atom are excited, for example by being heated, the additional energy pushes the electrons to higher energy orbitals. When the electrons fall back down and leave the excited state, energy is re-emitted in the form of a photon
Explanation:
AmbienTM is a sedative used in the treatment of insomnia. It was discovered in 1982 and brought to market in 1992 (it takes a long time for new drugs to undergo the extensive testing required to receive approval from the Food and Drug Administration). Identify the hybridization state and geometry of each carbon atom in the structure of this compound:
Answer:
sp3 - 1,2,13,16,18,19
sp2- 3,4,5,6,7,8,9,10,11,12,14,15,17
sp- 0
Explanation:
Hybridization is the idea that atomic orbitals fuse to form newly hybridized orbitals, which in turn, influences molecular geometry and bonding properties (Chemlibretexts).
Carbon atoms that are singly bonded are sp3 hybridized, carbon atoms that are doubly bonded are sp2 hybridized while carbon atoms that are triply bonded are sp hybridized.
Sp3 hybridized atoms have a tetrahedral geometry, sp2 hybridized atoms have a trigonal planar geometry while an sp hybridized atom has a linear geometry.
The hybridization state of each atom in the compound has been shown in the answer section.
The earth’s crust is subdivided into
A. Lithosphere, hydrosphere and atmosphere.
B. Troposphere, stratosphere and ionosphere.
C. Core, mantle and atmosphere.
D. Hydrosphere, geosphere and stratosphere.
Answer:
c. core, mantle and atmosphere
Answer:
Correct answer is letter A
Because Lithosphere includes the crust and the uppermost mantle.
i need help with this ASAP please i don’t understand this
Answer:
750 mmHg
Explanation:
From the question given above, the following data were obtained:
Partial pressure of CO₂ (Pₐ) = 250 mmHg
Partial pressure of N₂ (P₆) = 375 mmHg
Partial pressure of He (P꜀) = 125 mmHg
Pressure of the mixture (Pₜ) =?
The pressure of the mixture of the gases can be obtained as follow:
Pₜ = Pₐ + P₆ + P꜀
Pₜ = 250 + 375 + 125
Pₜ = 750 mmHg
Therefore, the pressure of the mixture of the gases is 750 mmHg
the eye is connected to the brain by nerves.
A. True
B. False
the answer is A..which is true
What's the mass in grams of 0.334 moles of sucrose (C12H22O11)?
Answer:
114.23g
Explanation:
Mass = xg
Mole = 0.334 mol
Molar mass of Sucrose
(C = 12, H = 1, O = 16)
C12H22O11
(12×12)+(1×22)+(16×11)
144 + 22 + 176
342g/mol
Mass = No of mole × Molar mass
Mass = 0.334 × 342
Mass = 114.228
Mass ≈ 114.23g
Where does thermal energy go? Assuming you forgot your hot food and came after a while and found it cold now. Where did the energy go?
supposing on a hypothetical garden 43 identical trees contains a total of 19565 leaves. if each branch on a given tree consist of 35 leaves how many branches does each tree have?
Answer:
13 branches/tree
Explanation:
Step 1: Given data
Total number of trees (t): 43 treesTotal number of leaves (l): 19565 leavesNumber of leaves per branch (l/b): 35 leaves/branchStep 2: Calculate the total number of branches (b)
We will use the following expression.
b = l × b/l
b = 19565 leaves × 1 branch/35 leaves = 559 branch
Step 3: Calculate the number of branches per tree (b/t)
We will divide the total number of branches by the total number of trees.
559 branches/43 trees = 13 branches/tree
Explain what you discovered from the Simulation about why food coloring spreads faster in warmer water.
Answer:
the water molecules have more energy and are moving faster than the molecules of cold water. This makes it easier for the dye to get mixed throughout the hot water.
Explanation:
Answer:
Because particles moves more by kinetic energy and diffusion will spread with the particles
Explanation:
5. 1.250 g of an alloy which is 90.00 % Ag and 10.00 % Cu is reacted with nitric acid producing AgNO3 and Cu(NO3)2 dissolved in solution. To the solution of the nitrate compounds is added a piece of copper wire that reacts only with the AgNO3 in solution to precipitate all of the silver, and produce additional Cu(NO3)2 (aq) . (The equation for this single-replacement reaction is: AgNO3(aq) + Cu(s) Cu(NO3)2(aq) + 2 Ag(s) ) The resulting solution containing all of the Cu(NO3)2 produced by the above processes is treated with excess zinc to precipitate the entire amount of copper (ll) ion present. ( The equation for this step is Cu(NO3)2(aq) + Zn(s) Zn(NO3)2(aq) + Cu(s) ) What mass of copper will be precipitated?
Answer:
See explanation
Explanation:
According to the question Copper is obtained from the original alloy and the copper wire used to displace the silver.
So,
Mass of the copper from the original alloy: (10.00 % * 1.250 g) = 0.125 g
We now need to obtain the mass of the copper from the wire, then we consider how much silver is precipitated:
Mass of silver in the alloy; 90.00 % * 1.250 g = 1.125 g
So,
Amount of silver precipitated =
1.125 / 107.9 = 0.01043 mole
From the reaction equation, it takes two moles of silver to displace one mole of copper.
Hence, the amount of copper from the wire is: 0.01043 / 2 = 0.005213 mol
And a mass of 0.005213(63.55) = 0.3313 g
Total mass of copper= 0.125 + 0.3313 = 0.456 g
16. When a person looks up into the sky and
sees a full moon, what fraction of the
bright surface of the moon do we see?
Answer:we see 1 side because the other side is not visible
Explanation:
what mass of sodium hydroxide is needed to neutralise 24.5kg of sulfuric acid
H2SO4 + N2 = 2NH3
Answer:
23.92 g
Explanation:
Molar mass of H2SO4 = (2×1)+32+(16×4)= 2+32+48= 82g/mol
H2SO4 + 2NaOH ---> Na2SO4 + 2H2O
I mole of H2SO4 = 2 moles of NaOH
24.5/82 = 24.5/82 × 2
= 0.598 moles of NaOH will neutralize
Mass= mole× molar mass
Molar mass of NaOH= 23+16+1 = 40g/mol
Mass= 0.598 × 40 = 23.92g of NaOH
Answer:
20g
Explanation:
First of all, you have got your formula wrong. It should be [tex]H_{2}SO_{4} + 2NaOH = Na_{2}SO_{4} + 2H_{2}O[/tex].
Start by finding the Relative Formula Mass for sulfuric acid. [tex]H_{2}SO_{4}[/tex] is equal to (2x1)+32+(16x4)=98. You then calculate Mols by doing [tex]Mols=\frac{Mass}{Relative Formula Mass}[/tex]. So, [tex]\frac{24.5}{98} = 0.25[/tex], so the Mols of Sulfuric Acid is 0.25.
The Mol ratio of Sulfuric Acid to Sodium Hydroxide is 1:2, so 0.25:0.5.
Now, you have to find the Relative Formula Mass of Sodium Hydroxide, or [tex]NaOH[/tex]. 23+16+1=40. Finally, multiply 0.5 by 40, and you'll find that the maximum mass is 20g.
4 NH3 +5 02 +4NO + 6H2O
When 70.25 grams of NH3 react, how many moles of H20 are produced?
Answer:
6.19 mol H₂O
Explanation:
4 NH₃ + 5O₂ → 4NO + 6H₂OFirst, we convert 70.25 grams of NH₃ into moles, using its molar mass:
70.25 g ÷ 17 g/mol = 4.13 mol NH₃Then we convert 4.13 moles of NH₃ into moles of H₂O, using the stoichiometric coefficients of the balanced reaction:
4.13 mol NH₃ * [tex]\frac{6molH_2O}{4molNH_3}[/tex] = 6.19 mol H₂OWhy Is the atomic theory a theory and not a law?
Answer:
Atomic theory is the scientific theory that matter is composed of particles called atoms. Atomic theory traces its origins to an ancient philosophical tradition known as atomism. ... An atom is now defined as the basic particle that composes a chemical element.
Explanation:
Hope i helped
In a Sodium ion 11Na +1
atomic number =11
mass number =23 ,
the number of electrons =
Answer:
11 electrons
Explanation:
The number of electrons is the same as the number of protona in a ATOM.
They will most likely be different in a ion, simple bond or a convalent bond.
How many K3PO4 are in the equation below after it is correctly balanced?
K3PO4 +
HCI -->
KCI +
H3PO4
Answer:
1 K3PO4 +3 HCI -->3 KCI +1 H3PO4
Explanation:
K3PO4- 1
Pick the answer that correctly spells a layer of the atmosphere.
A. Mesosphere
B. Thermsphere
C. Mezosphere
D. Tropshere
E. Thermoshere
The correct answer is option A; Mesosphere
The mesosphere is defined as the part atmosphere found above the stratosphere but below the thermosphere.
In this layer of the atmosphere, temperature decreases with height. It covers about 50 to 85 km above the earth.
Mesosphere is the only layer of the atmosphere that was correctly spelt among the options.
Learn more: https://brainly.com/question/12117482
Write balanced complete ionic equation for
CaS(aq) + CaCl2 (aq) –> CdS(s) + CaCl2 (aq).
Express your answer as a chemical equation. Identify all of the phases in your answer.
Answer:
Ca²⁺(aq) + S²⁺(aq) + Cd²⁺(aq) + 2Cl¯(aq) —> CdS (s) + Ca²⁺(aq) + 2Cl¯(aq)
Explanation:
CaS (aq) + CdCl₂ (aq) –> CdS (s) + CaCl₂ (aq)
The complete ionic equation for the above reaction can be obtained as illustrated below:
In solution:
CaS (aq) —> Ca²⁺(aq) + S²⁺(aq)
CdCl₂ (aq) —> Cd²⁺(aq) + 2Cl¯(aq)
CaS (aq) + CdCl₂ (aq) –>
Ca²⁺(aq) + S²⁺(aq) + Cd²⁺(aq) + 2Cl¯(aq) —> CdS (s) + Ca²⁺(aq) + 2Cl¯(aq)
You add 0.300 moles of an acid to enough water to get a total of 0.500 liters of solution. Your molar concentration is?
What are the two most abundant chemicals in air?
Answer:
The most abundant chemical/gas is Nitrogen, which makes up about 78% and Oxygen at second place with approximately 21%
Answer:
Nitrogen and Oxygen because about 70% of air is nitrogen and around 20% of air is Oxygen.
Hope this helps!
What is the maximum number of bonds that can occur between two atoms?
One
Two
Three
Four
Five
it can occur 5 atoms
Explanation:
that is base on my study
7. Which substance produces sulfur dioxide when roasted in air?
A bauxite
B cryolite
C hematite
D zinc blende
B. cryolite substance produces sulfur dioxide when roasted in air.
Cryolite (Na3AlF6, sodium hexafluoroaluminate) is an uncommon mineral identified with the once-large deposit at Ivittuut on the west coast of Greenland, mined commercially until 1987.
Sulfur dioxide (SO2) is a gaseous air pollutant composed of sulfur and oxygen. SO2 forms when sulfur-containing fuel such as coal, oil, or diesel is burned. Sulfur dioxide also converts in the atmosphere to sulfates, a major part of fine particle pollution in the eastern U.S.
What is sulfur dioxide and why is it bad?Sulfur dioxide (SO2), a colorless, bad-smelling, toxic gas, is part of a larger group of chemicals referred to as sulfur oxides (SOx). These gases, especially SO2, are emitted by the burning of fossil fuels — coal, oil, and diesel — or other materials that contain sulfur.
What is sulfur dioxide used for?Although its chief uses are in the preparation of sulfuric acid, sulfur trioxide, and sulfites, sulfur dioxide also is used as a disinfectant, a refrigerant, a reducing agent, a bleach, and a food preservative, especially in dried fruits.
To learn more about Sulfur dioxide, refer
https://brainly.com/question/803589
#SPJ2
What is the hydrogen ion concentration in molarity if the hydroxide ion concentration is 7.609 10-13 ?
[H+][OH-] = 10-14
pH = -log[H+]
[H] = 10pH
Answer: The hydrogen ion concentration in molarity is 0.013
Explanation:
pH or pOH is the measure of acidity or alkalinity of a solution.
pOH is calculated by taking negative logarithm of hydroxide ion concentration and pH is calculated by taking negative logarithm of hydrogen ion concentration
Putting in the values:
[tex]pOH=-\log[7.609\times 10^{-13}][/tex]
[tex]pOH=12.1[/tex]
Now , [tex]pH+pOH=14[/tex]
[tex]pH=14-12.1=1.9[/tex]
[tex]pH=-\log [H^+][/tex]
[tex][H^+]=0.013M[/tex]
The hydrogen ion concentration in molarity is 0.013
A balloon has a volume of 105 Lif the temperature is 20 °C. If the temperature is -55°C,
what will be the volume of the volume?
Answer:
78.12 L
Explanation:
Given that,
Initial volume, V₁ = 105 L
Initial temperature, T₁ = 20°C = 20+273 = 293 K
New temperature, T₂ = -55 °C = 218 K
We need to find the new volume of the balloon. The relation between the volume and the temperature is given by :
[tex]\dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}[/tex]
Where
V₂ is the new volume
[tex]V_2=\dfrac{V_1T_2}{T_1}\\\\V_2=\dfrac{105\times 218}{293}\\\\V_2=78.12\ L[/tex]
So, the new volume is 78.12 L.
Assignment
Explain why it is not advisable to wear
black silky cloth in the sun
Answer:
It is not water absorbant and also the colour black, due to it's dark nature makes the person wearing the cloth feel hot. Unlike cotton, silk is not at all water absorbant as it does not absord any sweat produced in the wearers body
25. What is a subdivision of a family? *
O kingdom
O domain
O genus
O species
PLEASE ANSWER True or False: When adding reactions together to get a desired reaction you must also add their enthalpies to get the enthalpy of that desired reaction.
Answer:
true
Explanation:
A sample of gas at a pressure of 0.850 atm has a volume of 675 mL. What will the
volume be if the pressure is increased to 1.50 atm?
Answer:
382mL
Explanation:
Boyle's Law P₁V₁ = P₂V₂
(0.850atm)(675mL) = (1.50atm)(V₂)
573.75 = (1.50atm)(V₂)
V₂ = 573.75/1.50
V₂ = 382.5mL = 382mL
A sample of aluminum, which has a specific heat capacity of 0.897·J·g−1°C^−1 , is put into a calorimeter (see sketch at right) that contains 300.0g of water. The aluminum sample starts off at 94.5°C and the temperature of the water starts off at 21.0°C .When the temperature of the water stops changing it's 23.8°C .The pressure remains constant at 1atm .Calculate the mass of the aluminum sample.
Answer: The mass of aluminium sample is 55.4 gram
Explanation:
[tex]Q_{absorbed}=Q_{released}[/tex]
As we know that,
[tex]Q=m\times c\times \Delta T=m\times c\times (T_{final}-T_{initial})[/tex]
[tex]m_1\times c\times (T_{final}-T_1)=-[m_2\times c\times (T_{final}-T_2)][/tex]
where,
[tex]m_1[/tex] = mass of aluminium = ?
[tex]m_2[/tex] = mass of water = 300.0 g
[tex]T_{final}[/tex] = final temperature = [tex]23.8^0C[/tex]
[tex]T_1[/tex] = temperature of aluminium = [tex]94.5^oC[/tex]
[tex]T_2[/tex] = temperature of water = [tex]21.0^oC[/tex]
[tex]c_1[/tex] = specific heat of aluminium = [tex]0.897J/g^0C[/tex]
[tex]c_2[/tex] = specific heat of water = [tex]4.184J/g^0C[/tex]
Now put all the given values in equation (1), we get
[tex]-[m_1\times c_1\times (T_{final}-T_1)]=[m_2\times c_2\times (T_{final}-T_2)][/tex]
[tex]-[m_1\times 0.897\times (23.8-94.5)^0C]=[300.0g\times 4.184\times (23.8-21.0)][/tex]
[tex]m_1=55.4g[/tex]
Therefore, the mass of aluminium sample is 55.4 gram
iron (II) chloride + chlorine gas
iron (III) chloride
Answer:
Fe2Cl + Chlorine
Explanation:
Fe2Cl2
Which the following classes of compound is an example of acarbonyl compound
Answer:
b) carboxylic acid
Explanation: