When thermal energy is applied to a substance, the particles in the substance start to vibrate more rapidly, and the average kinetic energy of the particles increases.
What happens when thermal energy is applies to a substanceAs a result, the temperature of the substance increases. The amount of thermal energy required to increase the temperature of the substance by a certain amount is called the specific heat capacity of the substance.
The way the substance responds to the applied thermal energy also depends on its physical properties, such as its mass, density, and thermal conductivity. For example, a substance with a high thermal conductivity will transfer heat more rapidly to its surroundings, while a substance with a low thermal conductivity will retain heat more effectively.
If the applied thermal energy is sufficient, the substance may undergo a phase change, such as melting or boiling, as the increased kinetic energy overcomes the intermolecular forces holding the particles together.
Learn more about thermal energy at
https://brainly.com/question/19666326
#SPJ1
when does a star become a main-sequence star? when the rate of hydrogen fusion within the star's core is high enough to maintain gravitational equilibrium when hydrogen fusion is occurring throughout a star's interior when the protostar assembles from a molecular cloud when a star becomes luminous enough to emit thermal radiation the instant when hydrogen fusion first begins in the star's core
Answer: hope it helps
Explanation:
A protostar becomes a main sequence star when its core temperature exceeds 10 million K. This is the temperature needed for hydrogen fusion to operate efficiently.
what does the technique of interferometry allow?what does the technique of interferometry allow?it allows two or more telescopes to obtain a total light-collecting area much larger than the total light-collecting area of the individual telescopes.it allows us to determine the chemical composition of stars.it allows two or more telescopes to obtain the angular resolution of a single telescope much larger than any of the individual telescopes.it allows the same telescope to make images with both radio waves and visible light.it allows astronomers to make astronomical observations without interference from light pollution.
The technique of interferometry allows two or more telescopes to obtain the angular resolution of a single telescope much larger than any of the individual telescopes.
This is achieved by combining the signals received by the telescopes to create a single image with a higher resolution. Interferometry is especially useful for studying objects with small angular sizes, such as stars and planets.
Additionally, interferometry allows astronomers to make astronomical observations without interference from light pollution, as it can separate the signals from the object being observed from the background light.
However, interferometry does not directly determine the chemical composition of stars, although it can provide information about their temperature and other physical properties.
Learn more about interferometry:
https://brainly.com/question/30054443
#SPJ11
question 34 pts how do ambient sounds differ from sound effects?how are foley sounds different from sound effects?
The differences between ambient sounds, sound effects, and Foley sounds.
Ambient sounds, also known as background sounds or atmospheric sounds, are the continuous, subtle noises that help create a sense of atmosphere or location in a scene. They differ from sound effects in that sound effects are distinct, purposeful sounds added to emphasize specific actions or events in a scene.
Foley sounds, on the other hand, are a type of sound effect created manually by a Foley artist to match and enhance the actions happening on-screen. They are different from regular sound effects because they are typically recorded live in a studio using various objects and materials to create realistic, synchronized sounds for actions such as footsteps, clothing rustles, and object handling.
In summary:
1. Ambient sounds create a sense of atmosphere or location and are continuous and subtle.
2. Sound effects are distinct, purposeful sounds added to emphasize specific actions or events.
3. Foley sounds are a type of sound effect created manually by a Foley artist to match on-screen actions.
To know more about ambient sounds, sound effects, and Foley sounds:
https://brainly.com/question/16519187
#SPJ11
what is the weight of a cubic meter of cork? could you lift it? (use 400 kg/m^3 for the density of cork.)
To lift this weight, you would need a force greater than or equal to 3,920 N (assuming you are lifting it vertically).
weight = [tex]1 m^3 \times 400 kg/m^3 \times9.8 m/s^2[/tex]
weight = 3,920 N
Force is a physical quantity that describes the interaction between objects or systems. The SI unit of force is the Newton (N), which is defined as the amount of force required to accelerate a one kilogram mass at a rate of one meter per second squared.
Force is also responsible for deformations in solid objects, such as stretching or compressing a spring. Nuclear forces are responsible for the interactions between subatomic particles, and frictional forces are the forces that resist motion when two surfaces come into contact. Gravitational force is the force that pulls objects towards each other due to their masses. Electromagnetic force is responsible for the interactions between charged particles, such as in electricity or magnetism.
To learn more about Force visit here:
brainly.com/question/24115409
#SPJ4
A 60-kg swimmer suddenly dives horizontally from a 150-kg raft with a speed of 1. 5 m/s. The raft is initially at rest. What is the speed of the raft immediately after the diver jumps if the water has negligible effect on the raft?
The speed of the raft immediately after the diver jumps is 0.6 m/s.
After the swimmer jumps, the momentum of the system is still conserved, but it is no longer zero, since the swimmer is now moving. We can use the equation:
(m1v1 + m2v2)before = (m1v1 + m2v2)after
We want to solve for v2, velocity of the raft immediately after the jump.
Before jump, velocity of raft is zero, so we can simplify equation to:
m1v1 = m2v2
Substituting in values we know, we get:
60 kg * 1.5 m/s = 150 kg * v2
Simplifying, we get:
v2 = (60 kg * 1.5 m/s) / 150 kg = 0.6 m/s
So the speed of the raft immediately after the diver jumps is 0.6 m/s.
To know more about momentum, here
brainly.com/question/30677308
#SPJ4
Green laser pointers emit light with a wavelength of 532 nm. Do research on the type of laser used in this type of pointer and describe its operation. Indicate whether the laser is pulsed or continuous.
Pulsed lasers are used in specific applications where short bursts of laser light are needed, such as in laser ranging, lidar, or certain medical procedures.
What is Wavelength?
Wavelength is a term used in physics to describe the distance between two consecutive points of a wave that are in phase, or the distance over which a wave completes one cycle. It is commonly denoted by the Greek letter lambda (λ) and is usually measured in units such as meters (m), nanometers (nm), or angstroms (Å).
Green laser pointers typically use a type of laser known as a diode-pumped solid-state (DPSS) laser to generate laser light at a wavelength of 532 nm, which corresponds to green light in the visible spectrum. DPSS lasers are a type of laser that uses a solid-state crystal or material as the gain medium, which is pumped by a diode laser to achieve laser emission.
Learn more about Wavelength from the given link
https://brainly.com/question/10750459
#SPJ1
T/F : Staleness and burnout are not associated with overtraining.
False. Staleness and burnout are often associated with overtraining, which occurs when an individual exceeds their capacity to recover from intense physical training or activity.
Overtraining can lead to physical and psychological symptoms, including decreased performance, fatigue, irritability, and decreased motivation. It is important for individuals to listen to their bodies and take rest and recovery periods to prevent overtraining and associated symptoms.
To know more about Overtraining, please click:
brainly.com/question/5430690
#SPJ11
another capacitor, identical to the original, is added in series to the circuit described in the passage. compared to the original circuit, the equivalent capacitance of the new circuit is:
The equivalent capacitance of the new circuit with an identical capacitor added in series is half of the original circuit's capacitance.
When a second capacitor, identical to the original, is added in series to the circuit, the equivalent capacitance of the new circuit is reduced. This is because the total capacitance in a series circuit is always less than the individual capacitances. The formula for calculating the equivalent capacitance of a series circuit is:
[tex]1/Ceq = 1/C1 + 1/C2 + ... + 1/Cn[/tex]
Where C1, C2, ..., Cn are the capacitances of the individual capacitors.
Adding another capacitor in series to the circuit means that the equivalent capacitance will be smaller, and the total charge stored in the circuit will be less. This will affect the behavior of the circuit when connected to a voltage source, as it will take less time to charge and discharge.
Learn more about circuit's capacitance.
https://brainly.com/question/28884207
#SPJ4
consider the picture above of mars's orbit around the sun. which spot shows where mars will be when we see it in retrograde motion on earth?
When retrograde motion occurs and how it is related to Mars's orbit around the Sun:
Retrograde motion occurs when a planet appears to move backward in the sky from Earth's perspective. In the case of Mars, this happens when Earth overtakes Mars in their respective orbits around the Sun.
To understand when Mars will be in retrograde motion, consider these steps:
1. Picture both Mars and Earth orbiting the Sun, with Mars having a larger, slower orbit due to its greater distance from the Sun.
2. As Earth moves faster in its orbit, it eventually catches up to and passes Mars.
3. During this time, the relative positions of Earth, Mars, and the Sun create the illusion of Mars moving backward in the sky, as seen from Earth.
So, when trying to identify the spot where Mars will be in retrograde motion, look for the point in its orbit where Earth is passing Mars, creating the optical illusion of Mars moving backward in the sky.
To know more about Retrograde motion:
https://brainly.com/question/31026528
#SPJ11
help me please oml 2 one
Color: Both the bromine gas and steak have a brownish color.
What is bromine gas?Bromine gas is a reddish-brown, nonflammable, and highly toxic gas with a very strong, unpleasant odor. It is composed of two heavy, diatomic, halogen molecules, Br2, and is the only nonmetal element that exists as a liquid at room temperature. Bromine gas is denser than air and is soluble in water and organic solvents.
Texture: The bromine gas is a gas and therefore has no texture, while the steak is solid and has a firm texture.
Temperature: The bromine gas is a gas and therefore has a lower temperature than the steak, which is at room temperature.
Bromine Gas and Juice:
Color: The bromine gas is brownish and the juice is a yellowish or orange color.
Texture: The bromine gas is a gas and therefore has no texture, while the juice is a liquid and has a smooth texture.
Temperature: The bromine gas is a gas and therefore has a lower temperature than the juice, which is at room temperature.
To learn more about bromine gas
https://brainly.com/question/1126306
#SPJ1
5. Explain the law of conservation of energy using a relevant example from every day life.
The law of conservation of energy states that energy is neither created nor destroyed but is transformed from one form to another.
What is law of conservation of energy?The law of conservation of energy is the law that states that energy is neither created nor destroyed but is transformed from one form to another.
Examples of activities of everyday life that shows the conservation of energy include the following:
For loudspeaker, electrical energy is converted into sound energy.For a microphone, sound energy is converted into electrical energy.For a generator, mechanical energy is converted into electrical energy.When fuels are burnt, chemical energy is converted into heat and light energyLearn more about energy here:
https://brainly.com/question/25959744
#SPJ1
An example of the law of conservation of energy is a roller coaster.
What is the law of conservation of energy?The law of conservation of energy states that energy cannot be created or destroyed, only transferred or transformed from one form to another. This means that the total amount of energy in a closed system remains constant over time.
A roller coaster car gains kinetic energy as it moves down the track, but it also loses potential energy. At the bottom of the track, the car has the most kinetic energy and the least potential energy, while at the top of the track, it has the most potential energy and the least kinetic energy. However, the total amount of energy in the system remains constant.
Learn about law of conservation of energy here https://brainly.com/question/166559
#SPJ1
if the wavelength of a wave in a particular medium is tripled, what will happen to the frequency of the wave?
Answer:
V = λ * ν speed of wave in medium
We know the speed of a particular wave in a medium is constant.
ν = V / λ
If λ is increased by 3 then the frequency ν will be reduced by a factor of three to keep the speed constant.
ν' = ν / 3
maxwell's equations are a complete description of electric and magnetic fields. how many equations are there?
Maxwell's equations are a complete description of electric and magnetic fields. There are four equations in Maxwell's equations. These four equations are:
1. Gauss's Law for Electric Fields: Describes the relationship between electric charges and the electric field produced by them.
2. Gauss's Law for Magnetic Fields: States that there are no magnetic monopoles, and the magnetic field lines are always closed loops.
3. Faraday's Law of Electromagnetic Induction: Describes the induced electromotive force (EMF) in a closed circuit produced by a changing magnetic field.
4. Ampere's Law with Maxwell's Addition: Relates the magnetic field around a closed loop to the electric current passing through the loop and the rate of change of the electric field.
These four equations collectively provide a comprehensive description of electric and magnetic fields and their interactions.
To know more about Ampere's Law with Maxwell's Addition:
https://brainly.com/question/29831953
#SPJ11
A proton accelerates from rest in a uniform electric field of 691 N/C. At some time later, it’s speed is 2. 30 x 10^6 m/s. (a) What is the magnitude of its acceleration? (b) How long does it take the proton to reach this speed
(c) How far has it moved in this time interval?
(d) What is its kinetic energy at the later time?
Mass of proton: 1. 6726x10^-27
Fundamental charge:
1. 602 x10^-19
The proton experiences an acceleration of [tex]$6.60\times10^{10} \text{m/s}^2$[/tex] in a uniform electric field of 691 N/C, and it takes [tex]$3.48\times10^{-5}$[/tex] s to reach a velocity of [tex]$2.30\times10^{6}$[/tex] m/s. During this time, the proton travels a distance of [tex]$4.36\times10^{-10}$[/tex] m and has a kinetic energy of [tex]$3.07\times10^{-12}$[/tex] J.
(a) The magnitude of the acceleration experienced by the proton can be determined by using the equation for the force on a charged particle in an electric field, which is F = qE, where F is the force, q is the charge of the particle, and E is the electric field strength. For a proton, the charge is equal to the fundamental charge, which is [tex]$1.602\times10^{-19} \text{C}$[/tex]. Therefore, the force on the proton is [tex]$F = (1.602\times10^{-19} \text{C})(691 \text{N/C}) = 1.106\times10^{-16} \text{N}$[/tex]
The acceleration of the proton can be determined using the equation F = ma, where m is the mass of the proton. Thus, [tex]$a = F/m = \dfrac{1.106\times10^{-16} \text{N}}{1.6726\times10^{-27} \text{kg}} = 6.60\times10^{10} \text{m/s}^2$[/tex].
(b) To find the time it takes for the proton to reach the given speed, we can use the kinematic equation v = u + at, where u is the initial velocity (which is 0 m/s), v is the final velocity ([tex]$2.30\times10^{6} \text{m/s}$[/tex]), a is the acceleration ([tex]$6.60\times10^{10} \text{m/s}^2$[/tex]), and t is the time. Rearranging this equation gives [tex]$t = \dfrac{v-u}{a} = \dfrac{2.30\times10^{6} \text{m/s}}{6.60\times10^{10} \text{m/s}^2} = 3.48\times10^{-5} \text{s}$[/tex].
(c) The distance the proton has moved in this time interval can be calculated using the kinematic equation [tex]$s = ut + \dfrac{1}{2}at^2$[/tex], where s is the distance traveled. Substituting the known values, we get [tex]$s = \dfrac{1}{2}(6.60\times10^{10} \text{m/s}^2)(3.48\times10^{-5} \text{s})^2 = 4.36\times10^{-10} \text{m}$[/tex]
(d) The kinetic energy of the proton can be calculated using the equation [tex]$KE = \dfrac{1}{2}mv^2$[/tex], where KE is the kinetic energy, m is the mass of the proton, and v is the velocity of the proton. Substituting the known values, we get [tex]$KE = \dfrac{1}{2}(1.6726\times10^{-27} \text{kg})(2.30\times10^{6} \text{m/s})^2 = 3.07\times10^{-12} \text{J}$[/tex].
To learn more about acceleration
https://brainly.com/question/12550364
#SPJ4
A loose spiral spring carrying no current is hung from a ceiling. When a switch is thrown so that a current exists in the spring, do the coils move closer together move farther apart not move at all
The coils in the spring will move farther apart when a current is passed through it because of the solenoid effect.
The solenoid effect describes the way a loose spiral spring expands when a current is fed through it. An electric current flows through a coil of wire to create a solenoid, a type of electromagnet. A magnetic field is produced when current passes through the coil, and the magnetic field lines are parallel to the axis of the coil. The amount of current flowing through the coil and the number of wire turns within the coil determines how strong the magnetic field is.
Because a loose spiral spring behaves like a coil of wire, the solenoid effect is seen in this situation. The magnetic field that is created around a spring when a current is sent through it has lines that are parallel to the spring's axis. The interaction between the magnetic field and the spring's current produces a force that pushes the coils apart.
To learn more about solenoids, refer to:
https://brainly.com/question/4340558
#SPJ4
this question has multiple answers. choose all that are correct. the hotter an object group of answer choices the brighter the object. the faster the object. the redder the object. the dimmer the object. the bluer the object. the slower the object.
The hotter an object is, the brighter and redder it appears, while cooler objects appear dimmer and bluer.
The question is asking about the relationship between an object's temperature and its brightness, color, and speed. The correct answers are that the hotter an object is, the brighter it appears and the redder it appears.
This is because hot objects emit more light, including more of the red end of the spectrum. The opposite is also true, meaning that cooler objects appear dimmer and bluer.
The speed of an object is not directly related to its temperature, so that answer is incorrect. However, it is important to note that the temperature of an object can affect its movement and velocity in certain situations.
To learn more about : objects
https://brainly.com/question/28308143
#SPJ11
ten 7.0-w christmas tree lights are connected in series to each other and to a 120-v source. what is the resistance of each bulb?
The resistance of each bulb which are connected in series is 20.571 Ω.
Let's find the resistance of each bulb using the given terms:
1. Voltage of source (V_source) = 120 V
2. Number of bulbs (n) = 10
3. Power of each bulb (P) = 7.0 W
We'll use the formula P = V²/R to find the resistance of each bulb.
1: Find the total power of the series.
Total power (P_total) = n * P = 10 * 7.0 W = 70 W
2: Find the total resistance of the series.
Using the formula P_total = V_source^2 / R_total, we can find R_total:
R_total = V_source² / P_total = (120 V)² / 70 W = 14400 / 70 = 205.71 Ω
3: Find the resistance of each bulb.
Since the bulbs are connected in series, the total resistance is the sum of the individual resistances. Therefore, we can find the resistance of each bulb (R_bulb) as follows:
R_bulb = R_total / n = 205.71 Ω / 10 = 20.571 Ω
So, the resistance of each bulb is approximately 20.571 Ω.
Learn more about resistance:
https://brainly.com/question/24858512
#SPJ11
a student is 2.50m away from a convex lens while her image is 1.80m from the lens, what is the focal length?
To find the focal length of a convex lens, we can use the formula:
1/f = 1/di + 1/do
Where f is the focal length, di is the distance of the image from the lens, and do is the distance of the object from the lens.
We are given that the student is 2.50m away from the lens, so do = 2.50m. We are also given that the image is 1.80m from the lens, so di = 1.80m.
Plugging these values into the formula, we get:
1/f = 1/1.80 + 1/2.50
Simplifying this equation, we get:
1/f = 0.5556
Multiplying both sides by f, we get:
f = 1.80 / 0.5556
Solving for f, we get:
f ≈ 3.24 meters
Therefore, the focal length of the convex lens is approximately 3.24 meters.
To know more about focal length of a convex lens:
https://brainly.com/question/1031772
#SPJ11
A convex lens is 1.80 meters from a student who is 2.50 meters distant, and its focal length is 1.04 meters.
To solve this problem, we can use the lens equation:
1/f = 1/do + 1/di
where f is the focal length of the lens, do is the object distance (distance of the object from the lens), and di is the image distance (distance of the image from the lens).
In this problem, the object distance is do = 2.50 m and the image distance is di = 1.80 m. We can plug these values into the lens equation and solve for the focal length:
1/f = 1/do + 1/di
1/f = 1/2.50 + 1/1.80
1/f = 0.4 + 0.56
1/f = 0.96
f = 1/0.96
f ≈ 1.04 meters
Therefore, the focal length of the convex lens is approximately 1.04 meters.
To learn more about focal length, refer:-
https://brainly.com/question/29870264
#SPJ11
catching a wave, a 73.2-kg surfer starts with a speed of 1.44 m/s, drops through a height of 1.84 m, and ends with a speed of 8.89 m/s. how much nonconservative work was done on the surfer?
The nonconservative work done on the surfer is 2845.5 J.
We can use the work-energy theorem to solve this problem. The work-energy theorem states that the net work done on an object is equal to its change in kinetic energy. In this case, we can calculate the initial and final kinetic energies of the surfer and find the difference, which will give us the net work done.
The initial kinetic energy of the surfer is:
[tex]K_i = (1/2) * m * v_i^2[/tex]
[tex]K_i = (1/2) * 73.2 kg * (1.44 m/s)^2[/tex]
K_i = 75.7 J
The final kinetic energy of the surfer is:
[tex]K_f = (1/2) * m * v_f^2[/tex]
[tex]K_f = (1/2) * 73.2 kg * (8.89 m/s)^2[/tex]
K_f = 2921.2 J
The change in kinetic energy is:
ΔK = K_f - K_i
ΔK = 2921.2 J - 75.7 J
ΔK = 2845.5 J
According to the work-energy theorem, this change in kinetic energy must be equal to the net work done on the surfer. Therefore, the nonconservative work done on the surfer is:
W_nc = ΔK
W_nc = 2845.5 J
So, the nonconservative work done on the surfer is 2845.5 J.
Learn more about nonconservative work
https://brainly.com/question/28588859
#SPJ4
The majority of Venus's surface is:
A. volcanic plains with flowing lava.
B large, flat mesas with tiny valleys.
C. thick, soupy clouds of hydrogen.
D. frozen dunes of dust and sand.
Answer:
C.
Explanation:
When Venus surface get bit cold when weather hits the planet gets soupy clouds and etc.
if hydrogen is the most common element in the universe, why do we not see the lines of hydrogen in the spectra of the hottest stars?
The reason we do not see the lines of hydrogen in the spectra of the hottest stars is due to the ionization of hydrogen atoms at high temperatures.
In these stars, the temperatures are so high that the electrons in the hydrogen atoms are stripped away, leaving behind only the protons. This ionized hydrogen does not produce the same spectral lines as neutral hydrogen, which is what we typically observe in cooler stars. Instead, the spectra of hot stars are dominated by lines from ionized metals, such as helium, carbon, and oxygen. So while hydrogen is indeed the most common element in the universe, its presence in the spectra of hot stars is not as prominent due to ionization.
More on hydrogen: https://brainly.com/question/30077093
#SPJ11
A mass of 25. 0 kg is acted upon by two forces: is 15. 0 n due east and is 10. 0 n and due north. The acceleration of the mass is
the acceleration of the mass is 0.7212 m/s^2.
To find the acceleration of the mass, we need to first determine the net force acting on it. We can do this by using vector addition to add the two forces together.
Using the Pythagorean theorem, we can find the magnitude of the diagonal force:
sqrt[[tex](15N)^{2}[/tex] + [tex](10N)^{2}[/tex]] = sqrt[225 + 100] = sqrt(325) = 18.03 N
The direction of this force can be found using the inverse tangent function:
theta =[tex]tan^{-1}(10.0N/15.0N)[/tex] = 33.69 degrees north of east
We can now use vector addition to find the net force on the mass:
F_net = sqrt[[tex](15N)^{2}[/tex] + [tex](10N)^{2}[/tex]] = 18.03 N, at an angle of 33.69 degrees north of east
To find the acceleration of the mass, we can use Newton's second law, which states that the net force acting on an object is equal to its mass times its acceleration:
F_net = ma
Solving for the acceleration, we get:
a = F_net / m = 18.03 N / 25.0 kg = 0.7212 m/s^2
Therefore, the acceleration of the mass is 0.7212 m/s^2.
Learn more about Vector Addition:
https://brainly.com/question/19420810
Which of these objects is an insulator?
b. copper coin
d. steel fork
a. gold ring
C. glass rod
Answer:
C
Explanation:
Glass is one of the objects included in an insular so glass rod will be the final ans.
A compound microscope is a two-lens system used to look at very small objects. Which of the following statements is correct? The objective lens is a short focal length, convex lens and the eyepiece functions as a simple magnifier. The objective lens is a long focal length, convex lens and the eyepiece functions as a simple magnifier. The objective lens and the eyepiece both have the same focal length and both serve as simple magnifiers. The objective lens is a short focal length, concave lens and the eyepiece functions as a simple magnifier. The objective lens is a long focal length, concave lens and the eyepiece functions as a simple magnifier.
The objective lens is a long focal length, convex lens and the eyepiece functions as a simple magnifier is the correct statement about a compound microscope. Option b is correct.
In a compound microscope, the objective lens is a long focal length, convex lens that produces an inverted, magnified real image of the specimen. The eyepiece, on the other hand, functions as a simple magnifier, which further magnifies the real image produced by the objective lens and forms a virtual image that can be viewed by the observer's eye. Therefore, option b is the correct statement.
To know more about microscope, here
brainly.com/question/18661784
#SPJ4
--The complete question is, A compound microscope is a two-lens system used to look at very small objects. Which of the following statements is correct?
a. The objective lens is a short focal length, convex lens and the eyepiece functions as a simple magnifier.
b. The objective lens is a long focal length, convex lens and the eyepiece functions as a simple magnifier.
c. The objective lens and the eyepiece both have the same focal length and both serve as simple magnifiers.--
A wire, of length L = 3. 8 mm, on a circuit board carries a current of I = 2. 54 μA in the j direction. A nearby circuit element generates a magnetic field in the vicinity of the wire of B = Bxi + Byj + Bzk, where Bx = 6. 9 G, By = 2. 6 G, and Bz = 1. 1 G. A) Calculate the i component of the magnetic force Fx, in newtons, exerted on the wire by the magnetic field due to the circuit element.
B) Calculate the k component of the magnetic force Fz, in newtons, exerted on the wire by the magnetic field due to the circuit element.
C) Calculate the magnitude of the magnetic force F, in newtons, exerted on the wire by the magnetic field due to the circuit element
The i component of the magnetic force on the wire is 1.06 × 10^-13 N. The k component of the magnetic force on the wire is 6.69 × 10^-14 N. The magnitude of the magnetic force on the wire is 1.26 × 10^-13 N.
To calculate the i component of the magnetic force, we use the formula:
F = I * L x B
where I is the current, L is the length of the wire, B is the magnetic field, and x represents the cross product.
The cross product of L and B gives a vector perpendicular to both L and B, which is in the i direction. So we only need to find the magnitude of the cross product and multiply it by I to get Fx.
|L x B| = |L| |B| sinθ
where θ is the angle between L and B. Since L is in the j direction and B has i and k components, we have:
|L x B| = L * Bz = (3.8 × 10^-3 m) * (1.1 × 10^-4 T) = 4.18 × 10^-8 N
Then, Fx = I * |L x B| = (2.54 × 10^-6 A) * (4.18 × 10^-8 N) = 1.06 × 10^-13 N
To calculate the k component of the magnetic force, we use the same formula and take the k component of the cross product:
|L x B|k = |L| |B| sin(π/2) = |L| |B| = (3.8 × 10^-3 m) * (6.9 × 10^-5 T) = 2.63 × 10^-7 N
Then, Fz = I * |L x B|k = (2.54 × 10^-6 A) * (2.63 × 10^-7 N) = 6.69 × 10^-14 N
The magnitude of the magnetic force is given by,
F = sqrt(Fx^2 + Fz^2) = sqrt((1.06 × 10^-13 N)^2 + (6.69 × 10^-14 N)^2) = 1.26 × 10^-13 N
To know more about magnetic force, here
brainly.com/question/3160109
#SPJ4
how fast must a nonrelativistic electron move so its de broglie wavelength is the same as the wavelength of a 3.4-ev photon?
Answer:
1990.47 m/s
Explanation:
Answer: the answer is in the screen shots
Explanation:
voyager 1 is a space probe launched by nasa in 1977 and is the farthest human-made object. it experiences negligible gravity. voyager 1 is propelled by thrusters but will run out of fuel by 2040. what will happen to voyager 1 after this date?multiple select question.the velocity of voyager 1 will remain unchanged.voyager 1 will slow down from the velocity it will have when the fuel runs out.voyager 1 will immediately stop.voyager 1 will continue moving with the speed it will have when the fuel runs out.
Voyager 1 will continue moving with the speed it will have when the fuel runs out. The probe is traveling through the vacuum of space, where there is negligible gravity and no significant air resistance to slow it down.
Without the ability to adjust its trajectory, Voyager 1 will continue on its current path indefinitely unless it encounters a gravitational field that alters its trajectory. The probe may eventually drift off course and potentially collide with other celestial objects in its path. While Voyager 1 will continue to communicate data to Earth until its systems eventually fail, it will eventually become just another piece of space debris, floating silently through the cosmos.
Learn more about Voyager 1
https://brainly.com/question/3412409
#SPJ4
How might you utilize your recently acquired knowledge from PSIO 305 to make a daytime hike in the 49 degree Celsius Mojave Desert non-deadly?
Question options:
all of the above
decrease surface area to maximize convection
take medication to suppress aldosterone
drink lots of water to increase evaporative water loss
take off your shirt to increase radiative heat loss
One should drink a lot of water to maximise evaporative water loss in order to make a day walk in the Mojave Desert, where the temperature is 49 degrees Celsius, not fatal.
This will support hydration levels maintenance and temperature control. Wearing loose, light-colored clothing, taking breaks in the shade, and taking off your shirt to promote radiative heat loss can also help reduce surface area to maximise convection. However, it is not advised to take aldosterone-suppressing medication without a doctor's supervision.
Human physiology, which is covered in PSIO 305, teaches students how the body functions in various situations. The body may be subjected to intense heat in the Mojave Desert, which can cause dehydration and disorders associated with heat. Staying hydrated and controlling body temperature through sweating and evaporative water loss are crucial to avoiding this. Reduce heat absorption by dressing appropriately, taking rests in the shade, and using air conditioning. Aldosterone is a hormone that controls electrolyte balance; nevertheless, taking medicine to inhibit it might have consequences and is not advised without a doctor's supervision.
learn more about temperature here:
https://brainly.com/question/7323169
#SPJ11
One should drink a lot of water to maximise evaporative water loss in order to make a day walk in the Mojave Desert, where the temperature is 49 degrees Celsius, not fatal. Option d.
This will support hydration levels maintenance and temperature control. Wearing loose, light-colored clothing, taking breaks in the shade, and taking off your shirt to promote radiative heat loss can also help reduce surface area to maximise convection. However, it is not advised to take aldosterone-suppressing medication without a doctor's supervision.
Human physiology, which is covered in PSIO 305, teaches students how the body functions in various situations. The body may be subjected to intense heat in the Mojave Desert, which can cause dehydration and disorders associated with heat. Staying hydrated and controlling body temperature through sweating and evaporative water loss are crucial to avoiding this.
Reduce heat absorption by dressing appropriately, taking rests in the shade, and using air conditioning. Aldosterone is a hormone that controls electrolyte balance; nevertheless, taking medicine to inhibit it might have consequences and is not advised without a doctor's supervision.
learn more about temperature here:
brainly.com/question/7323169
#SPJ4
Full Question: How might you utilize your recently acquired knowledge from PSIO 305 to make a daytime hike in the 49 degree Celsius Mojave Desert non-deadly?
a. decrease surface area to maximize convection
b. all of the above
c. take medication to suppress aldosterone
d. drink lots of water to increase evaporative water loss
e. take off your shift to increase radiative heat loss