Answer:
Question: What is the current in a 160V circuit if the resistance is 2Ω?
Answer:
Voltage ( V ) = 160V
Resistance ( R ) = 2Ω
Current ( I ) = ?
By Ohms law
⇒ V = IR
⇒ 160 = I × 2
⇒ I = 160 / 2 = 80A
\rule{200}2
Question: What is the current in a 160V circuit if the resistance is 20Ω?
Answer:
Voltage ( V ) = 160V
Resistance ( R ) = 20Ω
Current ( I ) = ?
By Ohms law
⇒ V = IR
⇒ 160 = I × 20
⇒ I = 160 / 20 = 8A
\rule{200}2
Question: What is the current in a 160V circuit if the resistance is 10Ω?
Answer:
Voltage ( V ) = 160V
Resistance ( R ) = 10Ω
Current ( I ) = ?
By Ohms law
⇒ V = IR
⇒ 160 = I × 10
⇒ I = 160 / 10 = 16A
\rule{200}2
Question: Based on questions 2, 3, and 4, what happens to the current in a circuit as the resistance decreases? Increases?
Answer:
From ohms law
⇒ I = V / R
If we take Voltage as proportionality constant
⇒ I ∝ 1 / R
So, we can conclude that current is inversely proportional to resistance.
From 2, 3, 4 questions we can conclude that,
If resistance increases, current decreases and when resistance decreases, current increases.
\rule{200}2
Question: What voltage is required to move 6A through 5Ω?
Answer:
Resistance ( R ) = 5Ω
Current ( I ) = 6A
Voltage ( V ) = ?
By Ohms law
⇒ V = IR
⇒ V = 6 × 5
⇒ V = 30V
\rule{200}2
Question: What voltage is required to move 6A through 10Ω?
Answer:
Resistance ( R ) = 10Ω
Current ( I ) = 6A
Voltage ( V ) = ?
By Ohms law
⇒ V = IR
⇒ V = 6 × 10
⇒ V = 60V
\rule{200}2
Question:What voltage is required to move 6A through 20Ω?
Answer:
Resistance ( R ) = 20Ω
Current ( I ) = 6A
Voltage ( V ) = ?
By Ohms law
⇒ V = IR
⇒ V = 6 × 20
⇒ V = 120V
\rule{200}2
Answer:
80 amps
Explanation:
V = IR
160 volts = I(2 ohms)
I = 80 amps
The two forces are trying to make the cyclist slow down. They are _________ and _________ .
Answer:
Friction and gravity?
Explanation:
i dont know the possible answers but that's how physics so good luck.
A healthy breakfast should include foods from the Grains group, the Vegetables OR Fruits group, and the Dairy OR the Protein group. * O True O False
Answer:
vry true
Explanation:
yes because ll thoes give you protien sorry for my bad spelling
Answer:
True
I Had this before
What acceleration would be achieved by a 5N thrust motor in a 0.30kg
Answer:
F=ma
5N=0.3a
a=5/0.3=16.66m/s²
PLEASE GIVE BRAINLIEST
Answer:
16.7
Explanation:
acceleration=force/mass
How many oxygen (O) atoms are in a molecule of SiO2?
O A. 1
OB. 3
C. 4
D. 2
When you blow across the top of
a soda bottle, it acts like a closed
pipe. If it creates a fundamental
frequency of 680 Hz, how deep
is the bottle?
(Speed of sound = 343 m/s)
(Unit = m)
Please need help!!!!
Answer:
the new foundation would beExplanation:
ok
2. How does laser light differ from
normal light?
Answer:
Laser light differs from normal light because laser lights are monochromatic which means it only shines one color and only that color :3
Explanation:
:3
A car is moving at 11m/s and has a mass of 1200 kg. What is the momentum of her car?
(no links please!)
Answer:
momentum= mass x velocity
= 11 x 1200 =13200kgm/s
Which statement correctly describes these electric field lines
Answer:
ok
Explanation:
the correct answer is C please follow me
formula of average speed
Answer:
Hey mate....
Explanation:
This is ur answer.....
Hope it helps!
Mark me brainliest....
FOLLOW ME!!! :)
Help what is the answer pls
If C is the vector sum of A and B, C = A + B, What must be true if C = A + B?. What must be true if C = 0?.
Two dogs are pulling on a chew toy. One dog pulls the chew toy with 64 N [E] and
the other pulls the chew toy with 31 N [W]. Determine the ACCELERATION of the 3
kg chew toy.
Answer:
Eastward, at 11 m/s^2
Explanation:
64N-31N=unbalanced force of 33N
F=ma
33N=(3kg)a
a=11m/s^2 to the East
A goose flying south for the winter travels 55 miles directly south east (45 degrees) and then flies at an angle of 35 degrees Northeast for 75 miles. How far and in what direction did the goose travel?
Answer:
Part A
The distance from the start point the goose travels is approximately 84.96 miles
Part B
The direction the goose travel is approximately 71° Northeast
Explanation:
Part A
The distances the goose flies is given as follows;
The distance directly 45 degrees southeast the goose travels, AB = 55 miles
The distance Northeast the goose travels, BC = 75 miles
The angle Northeast the goose travels = 35°
From the attached drawing of the path the goose travels, we have, by cosine rule, the following relation;
a² = b² + c² - 2·b·c·cos(A)
Therefore, we have;
The length of side [tex]\overline{AC}[/tex]² = 55² + 75² - 2 × 55 × 75 × cos(80°) = 7217.40253425
[tex]\overline{AC}[/tex] = √(7217.40253425) ≈ 84.9552972701
The distance from the start point the goose travels ≈ 84.96 miles
Part B
By sine rule, we have;
75/(sin(A)) = [tex]\overline{AC}[/tex]/(sin(80°))
sin(A) = (75/[tex]\overline{AC}[/tex]) × (sin(80°)
∴ sin(A) = (75/84.9552972701) × (sin(80°) = 0.8694052016
∠A = arcsin(0.8694052016) = 60.3895991264° ≈ 60.4°
The direction the goose travel = 180 - 64 - 45 = 71°
∴ The direction the goose travel =≈ 71° Northeast
When a hot object makes a cold object warmer what is it called
does anybody have social media and could help me with my homework ? i will send you pictures of my work please all of my work is due tomorrow!! i need help
The parking brake on a 1200kg automobile has broken, and the vehicle has reached a momentum of 7800kg.M/s. What is the velocity of the vehicle?
Which would increase the speed of a sound wave?
Answer:
I would say temperature
One of the solid reactants was treated in a coffee grinder before adding to
the reaction container. *
O
A. Concentration
B. Temperature
C. Surface Area
D. Catalyst
E. Agitation
Answer:
C. Surface area
Explanation:
The rate of chemical reaction depends on various factors such as:
concentration and pressurenature of reactantstemperaturesurface areapresence of catalyst, etc.Effect of surface area of reactants: the rate of a chemical reaction can be increased by increasing the the area of contact of the reacting substances. This is especially important when one or more of the reactants are solids., because only the particles of the solid that are exposed are able to take part in the reaction at each instant of time. Therefore, the greater the surface area of the solid reactant particles the faster the reaction.
The surface area of solid reactants can be increased by grinding or pelletizing, thus allowing for a greater contact between the reacting particles,
The instance in which one of the solid reactants was treated in a coffee grinder before adding to the reaction container is one way of increasing the surface area of a reactant.
DO NOW: You are picking up a pendulum (Clay ball on a string) as you pull the pendulum up on one side and let it fall, what types of energy are being used?
Answer:
The energy used in the pendulum is the initial Potential (Mechanical) Energy, P.E. given to the Clay ball attached to the inclined and extended string by virtue of its elevated position in relation to the rest position (lower state)
The swinging of the pendulum is brought about by the dynamic equilibrium between the initial potential energy, P.E. and the Kinetic Energy, K.E., of the pendulum when it is in motion
The (total) Mechanical Energy, M.E. of the ideal pendulum is constant at all times during the motion of the pendulum and it is given by the following formula;
M.E. = P.E. + K.E.
At the top of the swing, P.E. is maximum and K.E. is zero
Similarly, at the mid (lowest) point in the swing, instantaneously, P.E. is zero and K.E. is maximum
Explanation:
Water uptake to the atmosphere occurs through the processes of evaporation and transpiration from plants where it condenses to form clouds. Clouds release the water through precipitation. During a summer of extreme drought, what can we expect to happen to the surface groundwater stored in ponds and lakes?
a. Water levels will increase because there is more precipitation
b. Animals won't drink as much to save water, so water levels remain the same
c. Water levels will increase because there are more evaporation and transpiration
d. Water levels will decrease because there are more evaporation and transpiration
water level will decrease because there are more evaporation and transpiration
A particle with an electric charge of 2*10-3^C is a distance of 5 m from a particle with a charge of 8*10-5 C . What is the strength of the electrostatic force between the two particles?
Answer:
F= K q1q2/r^2
K is a constant uqual to= 9 x 10^9 N m^2 C^-2
F= 9 x 10^9 x 2 x 10^-3 x 8 x 10^-5/25
F= 1440/25= 58N
M= 1000 g g= 10 m/s2 h= 10 K.E at GROUND = 400 j M.E = ....... ........J the answer is 400 so plz explain how
Answer:
M = 500 J
Explanation:
Given that,
Mass, M = 1000 g = 1 kg
Height, h = 10 m
Potential energy is given by :
P = mgh
P = 1×10×10
P = 100 J
The kinetic energy at ground = 400 J
Mechanical energy = sum of kinetic and potential energy
So,
M = 100 + 400
M = 500 J
So, the mechanical energy of the system is 500 J.
An object of mass 150 kg accelerates from a velocity of 5m/s to a velocity of 10m/s in the same direction. What is the impulse provided to cause this acceleration?
Answer:
If it accelerated from 5 to 10 in one second then we know that acceleration is final (velocity-initial velocity)/
time
this gives (10-5)/1
=5m/s^2
force = mass x acceleration so = 150 x 5
this gives us a force of 750N
impulse is force x time so = 750 x 1
this tells us the impulse is 750 N.s
All of this is assuming it accelerated to 10m/s in one second.
The definition of impulse allows to find the impulse response for the acceleration of the body is:
The impluse in acceleration direction is: I = 750 N s
Given parameters
Body mass m 150 kg The initial velocity vo = 5 m / s The final velocity vf = 10 m / sTo find
Impulse
The impulse is the change of the momentum of a body, it is a vector quantity
I = ∫ F. dt = Δp
Where the bold indicate vectors, I is the momentum, F the force, t the time, Δp the change in moment
The momentum is defined as the product of the mass of the body and its speed.
p = m v
We substitute in the expression of impulse
I = [tex]m v_f - m v_o[/tex]
Let's calculate.
I = 150 (10 -5)
I = 750 N s
In the direction of acceleration.
In conclusion using the definite of impulse we can find the impulse response for the acceleration of the body is:
The impluse in acceleration direction is: I = 750 N s
Learn more here: brainly.com/question/15652768
A force of 100N stretches an elastic string to a total length of 20cm. if an additional force of 100N stretches the spring 5 cm further, find the natural length of the spring if the elastic limit is not exceeded. Pls help ASAP
Answer:
8cm
Explanation:
The general formula to find this is F/X where in this case the f is the total of the two forces (100+100) and x is the sum of the length ( 20+5) which together comes 200&25respectively then divide 200 with 25 which comes 8cm.
3. A diagram showing the location of protons, neutrons, and ALL of the electrons in an atom.
A. Bohr Model
B. Orbital
C. Isotopes
D. Atomic number
Please answer this ASAP
Answer:
Bohr Model
Explanation:
What is the kinetic energy of a 25 kg object moving at a velocity of 4 m/s?
Thus Kinetic energy of the object is 200J when mass is 25 kg and velocity is 4 m/s.
Which happens when sound waves enter a vacuum?
A. They are reflected.
B. They move slower
C. They move faster
D. They stop moving
What are the mechanical advantage and mechanical efficiency of a lever that requires an input force of 40 N and lifts and lifts a boulder that weighs 80 N?
Answer:
2 , 200%
Explanation:
Mechanical advantage of a machine is defined as how much the machine multiplies the applied force.
It is given that :
Input force of the lever = 40 N
The weight of the boulder or the output force = 80 N
Therefore, the mechanical advantage = output force / input force
[tex]$=\frac{80}{40}$[/tex]
= 2
Mechanical efficiency is obtained by the dividing the output by the input and multiplying it with 100.
i.e. Efficiency = output / input x 100
[tex]$=\frac{80}{40}\times 100$[/tex]
= 200 %
what is specific heat capacity?
Specific heat capacity is defined as the amount of heat required to raise the temperature of 1 kilogram of a substance by 1 kelvin (SI unit of specific heat capacity J kg−1 K−1). From: Basic Physics and Measurement in Anaesthesia (Fourth Edition), 1995.
Delilah does 170 Joules of work in 30 seconds. Adam does 260 Joules of work in 20 seconds. Who was more powerful?
Power = [tex]\frac{Work}{Time}[/tex]
Delilah: 170J/30s = 5.66 W
Adam: 260J/20s = 13 W