What is the final temperature of 100 g of water at -15°C added to a styrofoam cup filled with 220 g of water at 32°C?

Answer:

[tex]\huge \fbox \pink {A}\huge \fbox \green {n}\huge \fbox \blue {s}\huge \fbox \red {w}\huge \fbox \purple {e}\huge \fbox \orange {r}[/tex]

Water is capable of dissolving a variety of different substances, which is why it is such a good solvent. And, water is called the "universal solvent" because it dissolves more substances than any other liquid. This is important to every living thing on earth. It means that wherever water goes, either through the ground or through our bodies, it takes along valuable chemicals, minerals, and nutrients.

It is water's chemical composition and physical attributes that make it such an excellent solvent. Water molecules have a polar arrangement of the oxygen and hydrogen atoms—one side (hydrogen) has a positive electrical charge and the other side (oxygen) had a negative charge. This allows the water molecule to become attracted to many other different types of molecules. Water can become so heavily attracted to a different molecule, like salt (NaCl), that it can disrupt the attractive forces that hold the sodium and chloride in the salt molecule together and, thus, dissolve it.

Answer:

It is propyl amine.

as amine =H-N-H

and it contain 3C =prop

Answer:

579 mL, .96 kPa, 34.21 c

Explanation:

Explanation:

1.Answer:579 ml

2.Answer:0.96

3.Answer:34.21 C

This is the right Answer :3

I hope you are having a great day ❤️❤️❤️

drag

effect

friction

parachutes

surface area

streamlined

air

water

Answer:

Carbon in the biosphere

Explanation:

Carbon is found in the biosphere stored in plants and trees. Plants use carbon dioxide from the atmosphere to make the building blocks of food during photosynthesis. Carbon is found in the hydrosphere dissolved in ocean water and lakes. Carbon is used by many organisms to produce shells.

Answer:

(4) 2-Methyl-2-butene.

Answer:

0.004243 KW/K.

Explanation:

From the question given above, the following data were obtained:

Heat transfered (Q) = 2 KW

Temperature of hot reservoir (Tₕ) = 825 K

Temperature of cold reservoir (T꜀) = 300 K

Next, we shall determine the entropy of both reservoir. This can be obtained as follow:

For hot reservoir:

Heat transfered (Q) = 2 KW

Temperature of hot reservoir (Tₕ) = 825 K

Entropy of hot reservoir (Sₕ) =?

Sₕ = Q/Tₕ

Sₕ = 2/825

Sₕ = 0.002424 KW/K

For cold reservoir:

Heat transfered (Q) = 2 KW

Temperature of cold reservoir (T꜀) = 300 K

Entropy of cold reservoir (S꜀) =?

S꜀ = Q/T꜀

S꜀ = 2/300

S꜀ = 0.006667 KW/K

Finally, we shall determine the change in the entropy of the two reservoirs. This can be obtained as follow:

Entropy of hot reservoir (Sₕ) = 0.002424 KW/K

Entropy of cold reservoir (S꜀) = 0.006667 KW/K

Change in entropy (ΔS) =?

ΔS = S꜀ – Sₕ

ΔS = 0.006667 – 0.002424

ΔS = 0.004243 KW/K.

Reaction 1 → Al + Zn²⁺ ⟶ Al³⁺ + Zn

Reaction 2 → Al³⁺ + Li ⟶ Al + Li⁺

Reaction 1 :-

Substance Oxidised :- Al

Substance Reduced :- Zn²⁺

Oxidizing Agent :- Zn²⁺

Reducing Agent :- Al

Reaction 2 :-

Substance Oxidised :- Li

Substance Reduced :- Al³⁺

Oxidizing Agent :- Al³⁺

Reducing Agent :- Li

Reaction 1 :-

Al

Zn²⁺

Zn²⁺

Al

Reaction 2 :-

Li

Al³⁺

Al³⁺

Li

Answer: There are no attractive or repulsive forces between particles.

Explanation: Gas molecules influence each other only by collision

Answer: can be considered to be both an acid and a base

Explanation:

Answer:

They would most likely starve and die UNLESS they could move to another habitat or tend to eating other sources of food. All the other animals in the food web would die too, because their food supplies would have gone. The populations of the consumers would fall as the population of the producer fell.

When a organism is removed, the organism who eats or hunt them will decrease some because they lost one of the food source even though they still have other food sources. This new organism will brake the balance of the ecosystem so their food sources will decrease by having too many predators that hunt and eat them.

In food chain's if one source from it is ever removed it would mess up the entire chain causing issue

Answer:

joules

Heat is the transfer of thermal energy from a system to its surroundings or from one object to another as a result of a difference in temperature. Heat is measured in joules (J).

Explanation: Mrk me brainliest please

Answer: Joules or calories

We can see that heat is added on the left side of the reaction, which means that the reaction required heat to take place and is endothermic

because the reaction is endothermic, (absorbs heat to proceed), more heat will shift it towards the product side

because there is an equal number of gaseous moles on both the sides, a change in pressure or volume won't affect the equilibrium

Answer:

See Explanation

Explanation:

According to the question, it is established that the pain caused by a lot of insect bites owes to the acidity of the insect bites.

If this is true, then there is an urgent need to neutralize the acidic insect bite using a basic substance.

Hence the pH of the creams used to treat insect bites should be basic(having a high pH).

2. The compound methene can not exist because it is supposed to be derived from the alkane called methane which contains only one carbon atom.

In order to form an alkene, there must be a double bond between two carbon atoms. This is not possible because there is only one carbon atom in the hypothetical methene. Hence,  a compound named methene cannot exist.

it is 6,6-Dibromoheptan-2-ol

I hope it helps you

Answer:

weight of H₂O formed = 2.3 grams H₂O (2 sig. figs.)

Explanation:

Rxn:                  CH₄(g)         +      2O₂(g)          =>     CO₂(g)           +  2H₂O(g)

Given:                 1.16g                   4.16g                     3.52g                  ? (g)

Moles:         1.16g/16g·mol⁻¹    4.16g/32g·mol⁻¹    3.52g/44g·mol⁻¹

                     = 0.0725mol.        = 0.13mol.             = 0.08mol.    => ? (moles)

Limiting Reactant: Divide each mole value by related coefficient of balanced standard equation (that is, balanced with coefficients in lowest whole number ratios). The smaller value is the limiting reactant.

                    0.0725/1                   0.13/2                0.080/1

                    = 0.0725                 = 0.065              = 0.080

Limiting Reactant is O₂(g) => 0.065 is smaller value after dividing each mole value by related coefficient of balanced equation.

NOTE: When working problem, however, one must use the mole value calculated from given amount in grams. That is, in this case 0.13 mole O₂. The 'divide by related coefficient and check smaller value' is ONLY for identifying the limiting reactant. This trick works for ALL general chemistry problems.

Moles H₂O formed: Since the coefficient of the limiting reactant (O₂) equals the coefficient of water (H₂O), then the moles of water formed is 0.065 mole H₂O.

Weight (in grams) of H₂O formed:

Grams H₂O = moles H₂O  x  formula weight H₂O

                   = 0.13 mole H₂O  x  18 g H₂O/mole H₂O

                   = 2.34 g H₂O  (calculator answer)

                   = 2.3 g H₂O  (final answer should be rounded to  2 sig. figs.)                                                                                                                                        => form of final answer should be based on data in final computation having the least number of sig. figs.                                      

Review: Sequence of calculations

       =>  moles of limiting reactant / coefficient of same cpd. in std. equation               = unknown (X) / coefficient of same (unknown) cpd. in std. equation

       => cross multiply and solve for unknown (X)

       => L.R.(moles) / eqn. coef. of L.R. = X / eqn. coef. of X  

       => (L.R.(calc'd moles)(eqn. coef. of X) = (X)(eqn. coef. of L.R.)

       => X (in moles) = (L.R.(calc'd. moles)(eqn. coef. of X) / (eqn. coef. of L.R.)

        => grams = moles x formula wt.                                                                

        => volume (L) = moles x std. volume (= 22.4L/mole)                                  

        => #particles = moles x Avogadro's Number (= 6.02 x 10²³ parts/mole)

Given -

T = 450K

∆H = 3000J

∆S = 4J/K

Using formula

∆G = ∆H - T∆S

∆G = 3000- 4*450

∆G = 1200 Joule

∆G is positive so the reaction is non spontaneous!

Answer:

1/64

Explanation:

From the question given above, the following data were obtained:

Time (t) = 42.78 s

Fraction of N–16 remaining (N/N₀) =?

NOTE:

N₀ => is the original amount.

N => is the amount remaining.

Next, we shall determine the number of half-lives that has elapsed. This can be obtained as follow:

Time (t) = 42.78 s

Half-life (t½) of N–16 = 7.1 s

Number of half-lives (n) =?

n = t / t½

n = 42.78 / 7.1

n = 6

Thus, 6 half-lives has elapsed.

Finally, we shall determine the fraction of N–16 that remains undecayed. This can be obtained as follow:

Number of half-lives (n) = 6

Fraction of N–16 remaining (N/N₀) =?

N = 1/2ⁿ × N₀

N = 1/2⁶ × N₀

N = 1/64 × N₀

Divide both side by N₀

N/N₀ = 1/64

Therefore, 1/64 of the sample remains undecayed.

Answer:

There is an app called Socrative (It has an owl on the app) that can give you the definition so you can match them without waiting. All you have to do is take a picture of the definition and it will give you the answer

Answer:

Concentration gradient - The movement of osmosis is affected by the concentration gradient; the lower the concentration of the solute within a solvent, the faster osmosis will occur in that solvent. Light and dark – They are also factors of osmosis; since the brighter the light, the faster osmosis takes place.

thenks and mark me brainliestt :)) pls

Answer: Concentration gradient - The movement of osmosis is affected by the concentration gradient; the lower the concentration of the solute within a solvent, the faster osmosis will occur in that solvent. Light and dark – They are also factors of osmosis; since the brighter the light, the faster osmosis takes place.

Explanation:

Osmosis is the passage of water from a high solute concentration area through a semi permeable membrane to a low solute concentration area to equalize the solute concentrations on both sides.

Answer:

Hypothesis is a statement of expectation or prediction that will be tested by research

P2 = 54.6 kPa

Explanation:

Given:

V1 = 10.0 L. V2 = 50.0 L

P1 = 273 kPa. P2 = ?

We can use Boyle's law to solve this problem.

P1V1 = P2V2

Solving for P2,

P2 = (V1/V2)P1

= (10.0 L/50.0 L)(273 kPa)

= 54.6 kPa

Answer:

0.89 L

Explanation:

Applying,

Boyle's Law,

PV = P'V'..................... Equation 1

P represent initial pressure, V represent initial volume, P' represent final pressure, V' represent final volume

Make V' the subject of the equation

V' = PV/P'.............. Equation 2

From the question,

Given: P = 150 mm Hg, V = 4.31 liters, P' = 725 mm Hg

Substitute these values into equation 2

V' = (150×4.31)/725

V' = 0.89 L

Answer:i don't understand

Explanation: yes

Answer:

CATION

Explanation:

If an atom has an equal number of protons and electrons, its net charge is 0. If it gains an extra electron, it becomes negatively charged and is known as an anion. If it loses an electron, it becomes positively charged and is known as a cation.

Answer:

W₃M₂

Explanation:

A compound must be neutral, that means the change of the compound must be equal to 0.

The compund of the problem is WₐMₓ

If A is the positive charge and B the negative charge. :

A + B = 0; A = B (1)

The charge of A is written as:

2*a = A

And the charge of B = A:

3*x = A

If a = 3:

2*3 = A = 6

3*x = 6

x = 2

That means the formula is:

Answer:

2.04 moles

Explanation:

Since the ratio of Na2O to NaOH is 1:2, you multiply the number of moles by 2, equaling 2.04 moles.