Answer:
0.0845 M
Explanation:
First we convert 4.27 grams of potassium iodide into moles, using its molar mass:
Molar Mass of KI = 166 g/mol4.27 g ÷ 166 g/mol = 0.0257 molNow we calculate the molarity of the solution, using the number of moles and the given volume:
Molarity = moles / litersMolarity = 0.0257 mol / 0.304 L = 0.0845 MThe molar solubility of calcium sulfide in a 0.222 M sodium sulfide solution is:________-
26. The water of the surface of the ocean is termed surface currents and moves in a regular pattern. They don't depend on the weather and move heat around Earth. What two things create surface currents?
An electromagnet can be made by wrapping wire around which object?
Answer: A wire the first answer gl on the quiz
When was the "Permian Era"?
Answer:
298.9 million years ago - 251.902 million years ago
Explanation:
It might be in the 2011 Earth Science Review Packet so maybe go check that out
Assume there exists some hypothetical metal that exhibits ferromagnetic behavior and that has (1) a simple cubic crystal structure, (2) an atomic radius of 0.126 nm, and (3) a saturation flux density of 0.69 tesla. Determine the number of Bohr magnetons per atom for this material. Part 1 Correct answer icon Excellent! What is the volume, in m3, for this unit cell
Answer:
[tex]n_b=0.947 Bohr\ magnetons/atom[/tex]
Explanation:
From the question we are told that:
Atomic radius [tex]r=0.126 nm[/tex]
Saturation flux density [tex]B= 0.69 T[/tex]
Generally the equation for number of Bohr magnetons per atom is mathematically given by
[tex]n_b=\frac{B_s*Vc}{\mu_0*\mu_b}[/tex]
Where
[tex]\mu_0=Magnetic\ permeability[/tex]
[tex]\mu_0=1.257 * 10^{-6}[/tex]
[tex]\mu_b=Magnetic\ Moment\ of\ an\ Atom[/tex]
[tex]\mu_b=9.27* 10^{-24}[/tex]
[tex]Vc=d^3[/tex]
[tex]Vc=(2(0.126*10^-9))^3[/tex]
[tex]Vc=1.6*10^{-29}[/tex]
Therefore the number of Bohr magnetons per atom for this material
[tex]n_b=\frac{0.69*1.6*10^{-29}}{1.257 * 10^{-6}*9.27* 10^{-24}}[/tex]
[tex]n_b=0.947 Bohr\ magnetons/atom[/tex]
Looking at the web above, each letter represents a species of animal in an ecosystem food web. Which of the following is most likely to cause the greatest decrease in the species B population.
A decrease in species C
A decrease in species E
A decrease in species D
A decrease in species A
Answer:
a decrease in species A is correct answers
How many grams of NaOH are contained in 5.0*10ml of a0. 77 sodium hydroxide solution
Answer:
1.54grams
Explanation:
Molarity of a solution = n/V
Where;
n = number of moles (mol)
V = volume (L)
Based on the information given in this question;
Volume of NaOH solution = 5.0 × 10ml
= 50ml = 50/1000 = 0.050 L
Molarity = 0. 77 M
Using; Molarity = n/V
0.77 = n/0.05
n = 0.77 × 0.05
n = 0.0385mol
To find the mass (grams) of NaOH in the solution, we use the following formula:
mole (n) = mass/molar mass
Molar mass of NaOH = 23 + 1 + 16 = 40g/mol
0.0385 = mass/40
mass = 0.0385 × 40
mass = 1.54grams.
Q13 Which compound has a boiling point that is influenced by hydrogen bonding?
A CH3CHO
B CH3OCH3
C HCO2H
D HCO2CH3
Answer:
[tex]A. \: \: CH _{3}CHO[/tex]
ethanal
This is because hydrogen is bonded with oxygen atom which is highly electronegative.
What is the wavelength of a photon with a frequency of 7.81 1014 Hz?
A.
517 nm
B.
384 nm
C.
848 nm
D.
234 nm
Answer:
Option B. 384 nm
Explanation:
From the question given above, the following data were obtained:
Frequency (f) = 7.81×10¹⁴ Hz
Velocity of photon (v) = 3×10⁸ m/s
Wavelength (λ) =?
The wavelength of the photon can be obtained as follow:
v = λf
3×10⁸ = λ × 7.81×10¹⁴
Divide both side by 7.81×10¹⁴
λ = 3×10⁸ / 7.81×10¹⁴
λ = 3.84×10¯⁷ m
Finally, we shall convert 3.84×10¯⁷ M to nm. This can be obtained as follow:
1×10¯⁹ m = 1 nm
Therefore,
3.84×10¯⁷ m = 3.84×10¯⁷ m × 1 nm / 1×10¯⁹ m
3.84×10¯⁷ m = 384 nm
Thus, the wavelength of the photon is 384 nm
explain how dna which is 6 feet long, can be stored in the nucleus of a tiny human cell.
Answer:
Packed inside the nucleus of every human cell are nearly 6 feet of DNA, which is divided into 46 individual molecules, one for each chromosome and each about 1.5 inches long. Packing all this material into a microscopic cell nucleus is an extraordinary feat of packaging.
Explanation:
Packed inside the nucleus of every human cell are nearly 6 feet of DNA, which is divided into 46 individual molecules, one for each chromosome and each about 1.5 inches long. Packing all this material into a microscopic cell nucleus is an extraordinary feat of packaging. For DNA to function, it can't be crammed into the nucleus like a ball of string. Instead, it is combined with proteins and organized into a precise, compact structure, a dense string-like fiber called chromatin.
(hope this helps can i plz have brainlist :D hehe)
What is bungee gum made of? A) The properties of both rubber and gum. B) Bungee cord and gum.
Answer:
The proporties of both rubber and gum.
Explanation:
The interaction of the skeletal and muscular systems to create movement and locomotion is regulated by which organ system?
A. Nervous
B. Respiratory
C. Digestive
D. Immune
Answer: steaks
Explanation:
BONUS QUESTION
you are stuck with a problem. You need to measure pH of a solution known to be made from a metal hydroxide, but you don't have a meter or any indicators. You do happen to have some lead(II) nitrate that is soluble, and you remember that lead (II) hydroxide is insoluble. You add some to 1 liter of your own unkown solution and a precipitate forms. You add more unttil the precipitate stops forming and then a bit more just in case. After you filter and dry the precipitate, you have 3.81 grams of it. What was the approximate pH of the original solution?
*This is just a bonus question but I'm very confused on it so any help would be appreciated*
Answer:
pH = 12.5
Explanation:
The reaction that takes place is
2OH⁻(aq) + Pb⁺²(aq) → Pb(OH)₂(s)The OH⁻ species come from the metal hydroxide of the solution, and Pb(OH)₂ is the precipitate.
Now we convert 3.81 grams of Pb(OH)₂ into moles, using its molar mass:
3.81 g ÷ 241.12 g/mol = 0.0158 mol Pb(OH)₂Now we convert 0.0158 Pb(OH)₂ moles into OH⁻ moles, using the stoichiometric coefficients of the reaction:
0.0158 mol Pb(OH)₂ * [tex]\frac{2molOH^-}{1molPb(OH)_2}[/tex] = 0.0316 mol OH⁻With the given concentration (1 L), we calculate [OH⁻]:
[OH⁻] = 0.0316 mol / 1 L = 0.0316 MThen we calculate the pOH of the solution:
pOH = - log[OH⁻] = 1.5And finally we calculate the pH:
pH = 14 - pOHpH = 12.5How is thermal energy transferred during conduction? Check all that apply.
1.Thermal energy is transferred between particles that are not touching each other.
2.Thermal energy is transferred between particles that are in direct contact with each other.
3.Thermal energy is transferred between objects of different temperatures.
4.Thermal energy is transferred between objects of the same temperature.
5.Thermal energy is transferred from slow-moving particles to fast-moving particles.
6.Thermal energy is transferred from fast-moving particles to slow-moving particles.
Answer:
Thermal energy is transferred between particles that are in direct contact with each other.
Thermal energy is transferred between objects of different temperatures.
Thermal energy is transferred from fast-moving particles to slow-moving particles.
Explanation:
Suppose the galvanic cell sketched below is powered by the following reaction: (s)(aq)(aq)(s) Write a balanced equation for the half-reaction that happens at the cathode of this cell. Write a balanced equation for the half-reaction that happens at the anode of this cell. Of what substance is E1 made? Of what substance is E2 made? What are the chemical species in solution S1? What are the chemical species in solution S2?
Answer:
Hello the required Image related to your question is missing attached below is the missing Image
answer :
a) Ni²⁺(aq) + 2e⁻ ⇒ Ni(s)
b) Fe(s) ⇒ Fe²⁺(aq) + 2e⁻
c) Fe (s)
d) Ni ( s )
e) Fe²⁺(aq) and SO⁻²₄ (aq)
f) Ni²⁺(aq) and SO⁻²₄(aq)
Explanation:
a) Balanced equation for the half-reaction at the cathode of the cell
Ni²⁺(aq) + 2e⁻ ⇒ Ni(s)
b) Balanced equation for half reaction at the anode of the cell
Fe(s) ⇒ Fe²⁺(aq) + 2e⁻
c) E1 is made of Fe (s)
d) E2 is made of Ni ( s )
e) chemical species in solution S1 = Fe²⁺(aq) and SO⁻²₄ (aq)
f) Chemical species in solution S2 = Ni²⁺(aq) and SO⁻²₄(aq)
Students performed an investigation on how aluminum cans taken to a recyle center were able to be reused. They found out an aluminum can undergoes which type of change?
a physical change because the can is heated
a chemical change because new metal is formed
a physical change because the material remains the same
a chemical change because an old can is changed into a new can
Answer:
The correct answer is - a physical change because the material remains the same.
Explanation:
A chemical change is the change that results in the formation of the new element or the substance whereas the physical change remains the same material or substance even after the change.
The physical change can be a change in density, size, shape, or volume, and other properties. In the recycling of the aluminum can the material remain the same only shape or size of the aluminum change order to reuse.
Answer:
its D i promise
Explanation:
how many grams of CaCl2 are required to make 25mL of 1.5
Answer:
Mass of CaCl2 = 4.1625 grams
Explanation:
We will recall that:
For solution: Molarity = [tex]\dfrac{moles \ of \ solute }{volume \ of \ solution (L)}[/tex]
[tex]1.5 = \dfrac{moles}{0.025 }[/tex]
Moles = 0.0375 moles
Mass = no of moles × molar mass(MM)
Molar mass of CaCl2 = 111 g/mol
Mass = 0.0375 mol × 111 g/mol
Mass of CaCl2 = 4.1625 grams
Explain the phenomenon of diffussion.
Answer:
the movement of particles from a higher consentration to a lower consentration through a mechanical support.
Explanation:
How many moles are in 3.555 g of c2h2?
Answer:
0.13653499904751903
Explanation:
Convert Units .com
70.8 g of CO is exposed 20.4 g of Hy and a reaction takes place.
CO + 2H2 - CH3OH
1. How many grams of methyl hydroxide (CH3OH) is produced?
2. What is the limiting reactant?
3. How much of the excess reactant is left unused?
literally what does any of this mean
Answer:
1. 80.9 g of CH₃OH
2. CO
3. 5.14moles
Explanation:
The reaction is:
CO + 2H₂ → CH₃OH
First place, we determine the moles of each reactant.
70.8 g . 1mol/ 28g = 2.53 moles of CO
20.4 g . 1mol / 2g = 10.2 moles of H₂
There is too much hydrogen, so the limiting reactant might be the carbon monoxide.
2 moles of H₂ react to 1 mol of CO
Then, 10.2 moles of H₂ may react to (10.2 . 1) /2 = 5.1 moles
We don't have enough CO, so it's ok that CO is the limiting. (We have 2.53 moles, we need 5.1 moles)
In the other hand, hydrogen is the excess reactant.
1 mol of CO react to 2 moles of hydrogen
2.53 moles may react to (2.53 . 2) /1 =5.06 moles
We have 10.2 moles, and we need 5.06 moles. Then (10.2 - 5.06) = 5.14 moles remains after the reaction goes complete.
Now that we know the limiting reactant, we can determine the grams of produced methanol. Ratio is 1:1
1 mol of CO produces 1 mol of CH₃OH
2.53 moles of CO must produce 2.53 moles of CH₃OH
We convert moles to mass: 2.53 mol . 32 g/mol = 80.9 g
Formula
RnF3+
(2) Lewis dot structure
Formation of RnF₃⁺ will nat takes place easily or if it is form then it will decompose easily.
What is the Lewis dot structure?Lewis dot structure of any compound tells about the bonding and outermost electrons present in all the entities present in that compound.
Radon is a noble gas atom and have stable electronic configuration, but still they form radon flouride products due to the high electronegativity of flourine it attracts the lone pair of electrons of radon.
For the formation of compound promotion of 1, 2 or 3 electrons from the 6p orbital to the vaccant 6d orbitals will give rise to 2, 4 or half filled orbitals so they will form only products with odd number of atoms.
Hence RnF₃⁺ will not form any compound.
To know more about Lewis dot structure, visit the below link:
https://brainly.com/question/7218689
A 0.982-g sample of an unknown gas exerts a pressure of 700 mm Hg in a 450-cm3 container at 23oC. Calculate the molar mass of this gas. [1cm3 = 1mL; 1000mL = 1L]
Answer:
57.4 g/mol
Explanation:
Step 1: Convert 450 cm³ to L
We will use the conversion factors 1 cm³ = 1 mL and 1000 mL = 1 L.
450 cm³ × 1 mL/1 cm³ × 1 L/1 mL = 0.450 L
Step 2: Convert 23 °C to Kelvin
We will use the following expression.
K = °C + 273.15 = 23 + 273.15 = 296 K
Step 3: Calculate the number of moles of the gas
We will use the ideal gas equation.
P × V = n × R × T
n = P × V / R × T
n = 700 mmHg × 0.450 L / (62.4 mmHg.L/mol.K) × 296 K = 0.0171 mol
Step 4: Calculate the molar mass of the gas
0.982 g of the gas correspond to 0.0171 moles.
M = 0.982 g/0.0171 mol = 57.4 g/mol
Which of the following statements sounds correct to you?
a) There are different definitions of acids and bases
b) Vegetables are acidic
c) Vegetables are alkaline
A method called "acid-alkaline balance" affects your health. The pH determines the acidity or alkalinity of a substance and is measured at a 0 to 14 scale.
The more acidic the fluid is the lower the pH. The higher the pH the more the solution will be alkaline (or base). If a mixture is within the range neither acid nor alkaline it has a neutral pH of 7 since both acidic or basic are commonly vegetable products. Note that trend of food in the body is acidic or alkaline and has nothing to do with its actual pH.Therefore the final answer is "Option a".
Learn more:
brainly.com/question/4399761
5. 16.3 g of NaCl is dissolved in water to make 1.75 L of solution. What is the molarity of this solution? A 0.159 M B 0.278 M C 9.31 M D 33.4 M
Answer: The molarity of this solution is 0.159 M.
Explanation:
Given: Mass of solute = 16.3 g
Volume = 1.75 L
Number of moles is defined as the mass of substance divided by its molar mass.
Hence, moles of NaCl (molar mass = 58.44 g/mol) ar calculated as follows.
[tex]Moles = \frac{mass}{molar mass}\\= \frac{16.3 g}{58.44 g/mol}\\= 0.278 mol[/tex]
Molarity is the number of moles of a substance present in a liter of solution.
So, molarity of the given solution is calculated as follows.
[tex]Molarity = \frac{no. of moles}{Volume (in L)}\\= \frac{0.278 mol}{1.75}\\= 0.159 M[/tex]
Thus, we can conclude that the molarity of this solution is 0.159 M.
Which explanation describes the first part of a chemical reaction? Reactants collide to form products. Products collide to form reactants. Products collide to form a transition state. Reactants collide to form a transition state.
Answer:
Reactants collide to form a transition state.
Explanation:
So sorry if I’m wrong but I feel this is right
To solve such this we must know the concept of chemical reaction. The correct option is option B that is atoms in one compound switch places with atoms in another compound.
What is chemical reaction?Chemical reaction is a process in which two or more than two molecules collide in right orientation and energy to form a new chemical compound. The mass of the overall reaction should be conserved.
There are so many types of chemical reaction reaction like combination reaction, double displacement reaction, combustion reaction, displacement reaction. "Reactants collide to form a transition state" describes the first part of a chemical reaction.
Therefore "Reactants collide to form a transition state" describes the first part of a chemical reaction. The correct option is option B.
Learn more about the chemical reactions, here:
https://brainly.com/question/3461108
#SPJ2
How many moles are in 20.5 grams of Calcium (Ca)? (1pt)
A)762.45 moles
B)1 mole
C)2 moles
D)0.5 moles
Answer:
Number of moles in 20.5 grams of calcium (Ca) = 0.5 moles (Approx.)
Explanation:
Given:
Amount of calcium (Ca) = 20.5 grams
Find:
Number of moles in 20.5 grams of calcium (Ca)
Computation:
Number of moles = Gram weight / Atomic weight of substance
We know that, Atomic weight of calcium (Ca) is 40.078 u
Number of moles in 20.5 grams of calcium (Ca) = Amount of calcium (Ca) / Atomic weight of calcium (Ca)
Number of moles in 20.5 grams of calcium (Ca) = 20.5 / 40.078
Number of moles in 20.5 grams of calcium (Ca) = 0.511
Number of moles in 20.5 grams of calcium (Ca) = 0.5 moles (Approx.)
how do i balance the first chemical reaction above?? plz plz help
Answer:
2K +F₂→ 2KF
Explanation:
When we balance an equation, we are trying to ensure that the number of atoms of each element is the same on both sides of the arrow.
On the left side of the arrow, there is 1 K atom and 2 F atoms. On the right, there is 1 K and 1 F atom.
Since the number of K atoms is currently balanced, balance the number of F atoms.
K +F₂→ 2KF
Now, that the number of F atoms is balanced on both sides, check if the number of K atoms are balanced.
Left
K atoms: 1
F atoms: 2
Right
K atoms: 2
F atoms: 2
The number of K atoms is not balanced.
2K +F₂→ 2KF
Left
K atoms: 2
F atoms: 2
Right
K atoms: 2
F atoms: 2
The equation is now balanced.
Please solve this fast pleasee i will make u the brainliest
I – FILL IN THE BLANKS:-
1. _____________plastics can be melted by heating and thereafter moulded into desired
shape.
2. Melamine and Bakelite are examples of____________________________.
3. _________________ absorbs sweat.
4. ______________are used for making toothbrush bristles.
5. _____________type of plastic is used for making grocery bags.
6. _____________type of plastic is used for making microwave cooking containers.
7. __________ fibres are obtained from plant and animals.
8. Synthetic fibres are acquired from __________ products.
9. Polythene is the polymer of __________.
10. __________ was the first artificially manufactured fibre.
11. Polyesters are extremely __________ and __________.
12. __________ is used as an alternative for expensive, warm cashmere clothes.
13. The polymer cellulose is made up of a large number of __________ units.
14. Silk fibre is obtained from __________ whereas artificial silk is obtained by chemical
treatment of __________
15. Polythene which is used to make polythene bags is an example of a __________.
16. Plastics do not react with _______________ and ____________________.
17. Plastics are generally ______________-____ than metals.
18. __________ is a special plastic on which oil and water do not stick.
19. We should always remember the 5R principle: __________, __________, __________,
Which reaction results in the GREATEST increase in entropy?
A)
(diamond)— Сgraphite)
B)
CO2(s) — CO2(g)
C)
H2O(s) — H20(5)
D)
2H2(g) + O2(g) → 2H2O(1)
What is the [H+] if [OH-] = 1 x 10-5 M?