Where are cardiac muscles used? Are they voluntary?

Answers

Answer 1

Answer:

Heart

Not voluntary.

Explanation:

The heart is made up of special muscle called the cardiac muscle that contains interconnected muscle fibres which are supplied with blood through the coronary artery. Also so that the waves of contraction can travel throughout the mass of the muscle.

Answer 2

Answer:

Cardiac muscle is in the heart.

No, they are not voluntary.


Related Questions

whats another name for body cells (not sex cells) that are produced by mitosis?

Answers

Answer: Diploid Cells (?)

Explanation:

If 95 grams of Iron are needed to react with sulfur, how many grams of sulfur are involved in this reaction?
2 Fe + 3 S à Fe2S3

Answers

Answer:

You need a balanced equation.

2Fe(s) + 3S(s) ==> Fe2S3(s) ... balanced equation

Reactants are solid iron and solid sulfur

Product is iron(III) sulfide

A. 1.42 moles Fe x 3 moles S/2 moles Fe = 2.13 moles sulfur

B. 2.75 moles S x 2 moles Fe/3 moles S = 1.83 moles iron

DESPERATE!!!!! What is the molar mass of an unknown gas that has a density of 2.29 g/L at a pressure of 0.75 atm and a temperature of 88. degrees Celsius?

Answers

Answer:

The molar mass of the gas is 90.4g/mol

Explanation:

To solve this question we have to use the equation:

d = PM / RT

Where d is density of the gas = 2.29g/L

P is pressure = 0.75atm

M is molar mass of the gas = ??

R is gas constant = 0.082atmL/molK

T is absolute temperature = 88°C + 273.15 = 361.15K

Solving for M:

dRT / P = M

2.29L*0.082atmL/molK*361.15K / 0.75atm = M

90.4g/mol = M

The molar mass of the gas is 90.4g/mol

✓ What kind of carbon storages would be the most affected by humans?

Answers

Answer: Burning fuels?

Explanation: I’m not very sure actually

If 35.4 liters of hydrogen gas are used, how many liters of nitrogen gas will be needed for the above reaction at STP?

Answers

Answer:

ujdbdbfbf fbFbsygtsjysnsgndhngsnsgnafbfa

The complete
conversion of 90.0
grams of hydrogen to
ammonia would require
how many moles of
nitrogen gas?

Answers

Answer:

15moles

Explanation:

The balanced equation of this reaction is as follows:

N2 + 3H2 → 2NH3

Molar mass of H2 = 2g/mol

mole = mass/molar mass

mole = 90/2

mole = 45moles.

Based on the above balanced equation, 1 mole of nitrogen gas (N2) reacts with 3 moles of hydrogen gas (H2)

Hence, 45moles of hydrogen gas will produce (45 × ⅓) = 15moles of nitrogen gas (N2).

Answer:

Its 14.9 for those who are doing the escape room :)

Explanation:

What causes the ocean tides to change from high tide to low tide?

Answers

i think the answer is the moon

4.2 L of a gas has a pressure of 560mmHg at 72⁰F. What is the temperature at760mmHg if the volume is still 4.2 L? (5 pts)

Answers

Answer:

The temperature at 760mmHg if the volume is still 4.2 L is 400.862 K

Explanation:

Gay Lussac's law indicates that when there is a constant volume, as the temperature increases, the pressure of the gas increases. And when the temperature is decreased, the pressure of the gas decreases. This law can be expressed mathematically as follows:

[tex]\frac{P}{T} =k[/tex]

Having an initial state 1 and a final state 2, the following is true:

[tex]\frac{P1}{T1} =\frac{P2}{T2}[/tex]

In this case:

P1= 560 mmHgT1= 72 F= 295.372 K (being 32 F= 273.15 K)P2= 760 mmHgT2= ?

Replacing:

[tex]\frac{560 mmHg}{295.372 K} =\frac{760 mmHg}{T2}[/tex]

Solving:

[tex]T2= 760 mmHg*\frac{295.372 K}{560 mmHg}[/tex]

T2= 400.862 K

11) How many grams are in 2.3 moles of magnesium chloride, MgCl,?

Answers

Answer:

218.98 grams

Explanation:

Given that,

No. of moles, n = 2.3

The molar mass of magnesium chloride is 95.211 g/mol.

We need to find the mass of 2.3 moles of magnesium chloride.

We know that,

No. of moles = given mass/molar mass

Let m be the given mass. So,

[tex]m=n\times M\\\\=2.3\times 95.211 \\\\=218.98\ g[/tex]

So, the required mass is equal to 218.98 grams.

Describe a method to investigate how the temperature changes when different masses of ammonium nitrate are dissolved in water

Answers

Answer:

Endothermic and Exothermic Reactions

Endothermic and Exothermic ReactionsIn this experiment you are investigating whether dissolving ammonium nitrate in water is an endothermic or exothermic reaction. An endothermic reaction absorbs energy from its surroundings (heat), so the reaction gets colder.

Explanation:

Don't forget to mark me as brainliest answer ☺

Is the formation of CO2(g) from its elements endothermic or exothermic?


Exothermic because the ΔH is negative.


Endothermic because the ΔH is negative.


Endothermic because the ΔH is positive.


Exothermic because the ΔH is positive.

Answers

Answer: Exothermic because the ΔH is negative.

Explanation:

The standard enthalpy of formation or standard heat of formation of a compound is the change of enthalpy during the formation of 1 mole of the substance from its constituent elements, with all substances in their standard states.

[tex]C(s)+O_2(g)\rightarrow CO_2(g)[/tex]

Exothermic reactions are those reactions in which heat is released and [tex]\Delta H[/tex] is negative.Endothermic reactions are those reactions in which heat is absorbed and [tex]\Delta H[/tex] is positive.

The reaction is exothermic as the heat is released during the formation of [tex]CO_2[/tex] as heat of formation of [tex]CO_2[/tex] is negative.

Identify three sources of point-source pollution.

Answers

oil spills, trash dumping, and sludge dumping are the sources of point- source pollution
the other person is right imo!

CH3OH can be synthesized by the reaction:
CO(g) + 2 H20) — CH3OH)
What volume of CH3OH gas (in L) can be synthesized if 18.6 L of Hy gas completely reacts at STP conditions?

Answers

Answer:

5

Explanation:

How many grams of NaCl are in 3.5 mol of NaCl? Also, how many moles of NaCl are in 150 g of NaCl?​

Answers

Answer:

204.5505 grams

2.5666 moles

Explanation:

For the first question, multiply 3.5 (# of moles) by 58.443 (g/mol for NaCl).

58.443 * 3.5

I'll distribute 3.5 into 58.443.

(3.5 * 50) + (3.5 * 8) + (3.5 * 0.4) + (3.5 * 0.04) + (3.5 * 0.003)

175 + 28 + 1.4 + 0.14 + 0.0105

203 + 1.4 + 0.14 + 0.0105

204.4 + 0.14 + 0.0105

204.54 + 0.0105

204.5505 grams

There are 204.5505 grams in 3.5 moles of NaCl.

For the second question, divide 150 (# of grams) by 58.443 (g/mol for NaCl). I'll convert both into fractions.

150/1 * 1000/58443

150000/58443

2.56660336 moles

2.5666 moles (rounded to 4 places to keep consistency with the first answer) are in 150 grams of NaCl.

लेख्नुहोस् । (Deserts are very hot during the day and very cold
during the night. Give reason.)

Answers

Because deserts have such little water vapor in the air, it makes it harder to trap heat or cold in a desert. And at night, the sun no longer heats the desert and the heat from the day doesn't stay trapped. Because of this, some deserts can get extremely cold at night, dropping to temperatures below 40F.

Hope this helps!! Have a wonderful day!!

It is actually sand, which turns the entire phenomenon hot. Sand cannot hold the heat. It acts like a mirror to the sun. During the daytime, it stays warm, and when the Sun is absent it loses all its heat making the nights colder. There’s nothing in the desert that can either absorb heat from the sun or hold it on the surface when the sun is set.

PLEASEEEE HELPPP??????

Answers

B. Grass to grasshoppers to bird to fox

Hope that helps

Answer:

(B) Grasses to Grasshoppers to Birds to Foxes

Explanation

Bacteria make their own food through photosynthesis making them autotrophs. * True or False​

Answers

Answer: true

Explanation:

true

Version: TAKEHOME
1) The ionic compound below is soluble in water. Complete the following:
-Draw the interaction of the ionic compound and water in the proper orientation. 3pts
-On the line below discuss the strength of the interaction within the compound compared to the strength of interaction
between the compound and water.

Answers

Answer:

The hydrogens of the water molecules around the bromide ion will need to be faced toward it, whereas the oxygens of the water molecules around the potassium ion will need to be faced toward it.

The strength of the interaction within the compound will supersede that of the interaction between the compound and water.

Explanation:

To answer this question, you need to be aware of the structure of a water molecule and its components. A water molecule has the chemical formula of H2O, and oxygen is inherently electronegative, meaning that it attracts electrons very strongly. As a result, when it is in H2O, it pulls the valence electrons of the H atoms very strongly, which results  in the H atoms being partially positively charged and the O atom being partially negatively charged. Therefore, the O atom is going to be attracted to the potassium ion, whereas the H atom is going to be attracted to the bromide ion.

The answer to the second part of the question is as written above because ionic bonds are stronger than ion-dipole bonds; that's just the way it is.  

Nevada's annual precipitation averages between 21 and 24 cm. In comparison,Washington state averages between 96 and 97 cm of precipitation per year. Which of these factors has the greatest impact on the difference in precipitation between these two states?

Answers

Answer:

Mountain ranges and prevailing winds.

Explanation:

Mountain ranges and prevailing winds are the factors that is responsible for the difference in the precipitation between Nevada and Washington states. The Washington state is located along the coastal region of pacific ocean and having more mountain ranges which causes more rainfall in that region while on the other hand, Nevada state comprise of plateau, basins and far away from the ocean which is the main cause of lower rainfall as compared to Washington state.

A sample of hydrogen gas has a volume of 145 mL when measured at 44
degrees C and 1.47 atm. What volume would the hydrogen sample occupy
at STP?

Answers

Answer:

[tex]186.01\ \text{mL}[/tex]

Explanation:

[tex]P_1[/tex] = Initial pressure = 1.47 atm

[tex]P_2[/tex] = Final pressure = [tex]10^5\ \text{Pa}[/tex]

[tex]T_1[/tex] = Initial temperature = [tex]44^{\circ}\text{C}[/tex]

[tex]T_2[/tex] = Final temperature = [tex]273.15\ \text{K}[/tex]

[tex]V_1[/tex] = Initial volume = 145 mL

[tex]V_2[/tex] = Final volume

We have the relation

[tex]\dfrac{P_1V_1}{T_1}=\dfrac{P_2V_2}{T_2}\\\Rightarrow V_2=\dfrac{P_1V_1T_2}{T_1P_2}\\\Rightarrow V_2=\dfrac{1.47\times 101325\times 145\times 273.15}{(44+273.15)\times 10^5}\\\Rightarrow V_2=186.01\ \text{mL}[/tex]

Final volume of the sample is [tex]186.01\ \text{mL}[/tex].

How many grams of BaCl2 can be made from 6 moles of Ba?

Answers

Answer:

823.98

Explanation:

Since there is only one Ba per atom you simply times 1 by 6 to get the number of mols of Ba per atom, then you times this by the atomic mass of Ba on the periodic table

Sam did an experiment. He boiled water in a teapot and saw vapor coming out. When he placed a cold plate in contact with the vapor it formed droplets of water.? Can you imagine what was that process and Why did he observe this?

Answers

Answer:

evaporation and condesation

Explanation:

because he was curiuos

The amount of heat energy needed to heat 200 g of water from 15 °C to its boiling point, and boil it, is

Answers

can you explain it further

One use of CaCl2 is for salting roads in the winter. How much would the freezing point of water decrease if a 3.23 molal (m) solution of CaCl2 were applied? (Kf = 1.86°C/(mol/kg) for water and i = 3 for CaCl2.)

Answers

Answer:

Freezing point of water will decrease to -18.02°C

Explanation:

We start from the formula for freezing point depression, one of the colligative properties.

ΔT = Kf . m . i

ΔT = Freezing T° of pure solvent - Freezing T° of solution

m = molality

Kf = Cyoscopic constant (specific for each solvent)

i = numbers of ions dissolved (Van't Hoff factor)

CaCl₂ →  Ca²⁺  + 2Cl⁻    i = 3

We replace each data:

0°C - T° F) = 1.86°C/m . 3.23 m . 3

T°F = - 18.02°C

HURRY ILL GIVE BRAINLIEST!
Match the cause to its effect.

Answers

Answer:

Cattles are giving nutrition supply throughout the year----some animals require nutrient enhancement for health

calves are given colostrum at birth----newborns require antibodies from their mothers

I dont want to write, so you know what the last option is

Explanation:

:) hope this helps

What is simple chemical test could you carry out to see if carbon dioxide has been produced

Answers

Carbon Dioxide

A positive test will result in the lime water turning milky. Lime water turns milky as the Calcium hydroxide (chemical name for limewater) reacts with carbon dioxide to form Calcium Carbonate which is insoluble in water and thus forms a milky white precipitate.

The answer is lime water turning milky ;)

Using your own words, explain energy.

Answers

Energy is the ability to do work

How many grams of Fe2O3 are formed when 51.3 grams of iron, Fe, react completely with oxygen, O2? 4 Fe + 3 O2 --> 2 Fe2O3

Answers

The Fe is our limiting reactant here. First, convert the mass of Fe given to moles of Fe by dividing mass by the molar mass:

(51.3 g Fe)/(55.845 g/mol) = 0.9186 mol Fe.

According to the balanced equation, 2 moles of Fe2O3 are produced for every 4 moles of Fe that are consumed. In other words, half as many moles of Fe2O3 will be produced as there are Fe that react:

(0.9186 mol Fe)(2 mol Fe2O3/4 mol Fe) = 0.4593 mol Fe2O3.

Finally, convert the moles of Fe2O3 back to grams by multiplying by the molar mass of Fe2O3:

(0.4593 mol Fe2O3)(159.6882 g/mol) = 73.3 g Fe2O3.

So, 73.3 grams of Fe2O3 are formed.

A scientist is investigating which type of medicine would dissolve faster, a solid pill or a scoop of powder. Which hypothesis
should the scientist develop given prior knowledge about surface area?
A. Solid pills have more surface area and will take longer to dissolve.
B. Powders have less surface area and will dissolve faster.
C. Solid pills have less surface area and will not dissolve.
D. Powders have more surface area and will dissolve faster.

Answers

B.

because a solute with a smaller surface area will dissolve faster

125 mL of a stock HCl solution was diluted to make 300 mL of a 0.750 mol/L HCl solution. What was the concentration of the original stock solution?

Answers

Answer: c= 1.8 mol/l

Explanation: amount of substance remains same.

Amount of substance n = c1·V1 = c2·V2 and c1= c2·V2/ V1

Original concentration c1= 300 ml·0.750 mol/l / 125 ml

Other Questions
a repelling force occurs between two charged objects when the charges are a particle moves along of the x_axis according to the equation X=2t+3t^2, whare x is in m and t is in second. calcualt the instantaneous velocity and the instantaneous acceleration in t=3s 23 POINTSWhich statement BEST describes the relationship between photosynthesis and cellular respiration?A Both processes release energy in the form of heat.B Both processes use energy to form molecules of glucose.C The products of one process are the reactants in the other process.D The products of one process are the same products in the other process. someone please help me fill in the blanks!!!! A rectangle with an area of 37 units2 is dilated by a scale factor of 2. Find the area ofthe rectangle after dilation. Round your answer to the nearest tenth, if necessary. why Nepal is known as a country of religious tolerance Pla help have to turn in in 5 min In a company's first year in operation, it made an annual profit of \$333,500$333,500. The profit of the company increased at a constant 8% per year each year. How much profit would the company make over the course of its first 24 years of operation, ? there are three slang words for friends"guys" "buddies" "dude" so what slang words do you use for your friends Please help me thanks! :) How might the existence of dialects create advantages and disadvantages for regions within larger countries? Please help mewill give brainliest Fill out this cell worksheet 3(2x 1) is 15 more than 8 what is the value of x? how can a match light without a spark As of Spring 2020, in otder to get into the CS major, you must have a 3.0 GPA or better in cs120, cs210, and cs245. In this problem, you should write one function named get_gpa, which will calculate this GPA. This function should have one parameter, which will be a dictionary of grades in computer science courses. You can assume that the dictionary will always have the keys 'cs120', 'cs210', and 'cs245', but it also might contain some names of other courses too. The values associated with each key will be a float representeing the GPA-style grade for that class. For instance, the parameter dictionary might look like: {'cs120':4.0 'cs245':3.0, 'cs210':2.0}. Some examples:get_gpa({'cs110': 4.0, 'cs245':3.0, 'cs335':4.0, 'cs120':3.0, 'cs210':3.0}) should return 3.0.get_gpa({'cs110': 4.0, 'cs120':3.0, 'cs245':2.0, 'cs210':1.0}) should return 2.0.get_gpa({'cs245':4.0, 'cs120':3.0, 'cs245':2.0}) should return 3.0.Make sure to include only the one function in your file. Benjamin Franklin once wrote "where liberty is, there is my country." Is he right? Was that the American experience from its colonial settlement to the end of Reconstruction? Can the story of America during that period be written as one of ever greater freedom for an ever greater number of people? i need help! please and thank you what is 92.471 to the nearest tenth Mr. Farris drives 7 1/2 miles directly west of his home to a restaunt.he then drives 8 2/3 miles directly east of the restauant to his office. how far , and in what direction is his office from his home ?