Answer:
A
Explanation:
H2 (g) + F2 (g) ----- > HF(g) *
What type of reaction?
Answer: Hydrogen fluoride
Explanation:
How many atoms are in 1.65 mol of potassium
Answer:
9.93 × 10²³ atomsExplanation:
The number of atoms of potassium can be found by using the formula
N = n × Lwhere n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
From the question we have
N = 1.65 × 6.02 × 10²³
We have the final answer as
9.93 × 10²³ atomsHope this helps you
9. 1.2 x 102 yd =
10. 1535 fl. oz. =
L
Answer:
9. 122.4 yards
10. 45.395 litres
Critical thinking : Place an unmagnetized piece of iron in a magnetic field (eg iron filings near a magnet). Why is it attracted to the magnet?
Magnets attract iron due to the influence of their magnetic field upon the iron. Before a piece of iron enters the magnet, the polarization of the irons atoms is random. When exposed to the magnetic field, the atoms begin to align their electrons with the flow of the magnetic field, which makes the iron magnetized as well. This, in turn, creates an attraction between the two magnetized objects. This is why a piece of iron that is exposed to a magnet becomes magnetic for some time afterward.
WILL GIVE BRANLIEST!!
Carbon tetrachloride (CCl4) is
ionic
covalent
Answer:
Covalent
Explanation:
In the carbon tetrachloride molecule, four chlorine atoms are positioned symmetrically as corners in a tetrahedral configuration joined to a central carbon atom by single covalent bonds
Answer:
Carbon tetrachloride (CCl4) is ✔ covalent.
Answers to assignment question:
What properties would you expect for CCl4? Select all that apply.
It is likely a gas or liquid at room temperature.
It is likely soluble in water.
It will likely light up a bulb in a conductivity apparatus.
It will likely have a high melting point.
Calcium oxide (CaO) is ✔ ionic.
What properties would you expect for CaO? Select all that apply.
It is likely a gas or liquid at room temperature.
It is likely soluble in water.
It will likely light up a bulb in a conductivity apparatus.
It will likely have a high melting point.
Explanation:
all correct on edge! :D
A bottle has a capacity of 1.2 liters. If the density of ether is 0.74 g/mL, what mass of ether can the bottle hold?
Answer:
Density is a value for mass, such as kg, divided by a value for volume, such as m3. Density is a physical property of a substance that represents the mass of that substance per unit volume. It is a property that can be used to describe a substance. We calculate as follows:
Volume = 60.0 g ( 1 mL / 0.70 g ) = 85.71 mL
Therefore, the correct answer is option B.
Explanation:
888 grams is a mass of ether that the bottle can hold.
Explanation:
The density of the substance is defined as a mass of substance present in the unit volume of the substance.
[tex]Density=\frac{Mass}{Volume}[/tex]
Given:
A bottle with a capacity of 1.2 Liters.
The density of ether = 0.74 g/mL
To find:
The mass of ether hold by a given bottle.
Solution:
The volume of bottle = V = 1.2 L
[tex]1 L = 1000 mL\\V = 1.2 L=1.2\times 1000 mL= 1200 mL[/tex]
The density of the ether = d = 0.74 g/mL
The mass of ether that bottle can hold = m
Volume of ether required = Volume of bottle = V = 1200 mL
Using the formula of density:
[tex]d=\frac{m}{V}\\0.74 g/mL=\frac{m}{1200 mL}\\m=0.74 g/mL\times 1200 mL= 888 g[/tex]
888 grams is a mass of ether that the bottle can hold.
Learn more about density here:
brainly.com/question/952755?referrer=searchResults
brainly.com/question/14373997?referrer=searchResults
Balance the following reaction. A coefficient of "1" is understood. Choose the option "blank" for the correct answer if the coefficient is "1."
C3H8 + O2 → CO2 + H2O
Answer:
Hope this helps!
Explanation:
I WILL GIVE A LOT OF EXTRA POINTS. PLEASE ANSWER ALL OF THEM
75 for all
Explanation:
Answer:
Explanation: Li= Lithium, Na= Sodium, K= Pottasium, Rb= Rubdium Cs= Cesiuna, Fr= Fransium
6. Energy levels increases as if you move down a group during the number of electrons increases again.
7. A charge with higher and effective nuclear charge makes greater attractions to the electrons, pulling the electrons cloud closer to the nucleus makes it in a smaller atomic radius.
8. Ge= Germanium, He= Helium, O=Oxygen, Barium
NH4, C032. OH", and PO43- are all examples of
Answer:
the popultion of it
Explanation:
NH₄+ , (CO₃)₂- , OH- , (PO₄)₃- are all examples of polyatomic ions.
What are Polyatomic ions?A covalent bound type of collection of two or more atoms or of a metal complex that can be said as behaving as a single unit and that has a net charge which is not zero is referred to as a polyatomic ion or a molecular ion.
Depending on the terminology , a polyatomic ion may or may not be referred to as a molecule. The Greek word poly- that means "many," although even ions made of just two atoms are frequently referred to be polyatomic.
A polyatomic ion may also be referred to as a radical (or less commonly, as a radical group).
The term "radical" today refers to a variety of free radicals, which are species with an unpaired electron and do not require a charge.
The hydroxide ion, which has the chemical formula OH- and is made up of one oxygen and one hydrogen atom and has a net charge of 1, is a straightforward example of a polyatomic ion.
A nitrogen atom, four hydrogen atoms, and a charge of +1 make up an ammonium ion, which has the chemical formula NH₄+.
In the context of acid-base chemistry and the production of salts, polyatomic ions are frequently helpful.
A polyatomic ion is frequently thought of as the conjugate base or acid of a neutral molecule. For instance, the polyatomic hydrogen (H₂) sulphate anion (SO₄) is the conjugate base of sulfuric acid (H₂SO₄). The sulphate anion (SO₄)₂ is created when another hydrogen ion is eliminated.
To know more about the similar questions on 'polyatomic ion'
visit- https://brainly.com/question/16843545
#SPJ2
Use the equation below to solve the problem that follows.
2H2 (g) + O2 (g) → 2H2O (g)
When David reacts 13.8 grams of hydrogen gas with excess oxygen, 87.0 grams of water are formed. Calculate his percent yield of water.
Percent yield = 70%
Further eplanationPercent yield is the comparison of the amount of product obtained from a reaction with the amount you calculated
General formula:
Percent yield = (Actual yield / theoretical yield )x 100%
An actual yield is the amount of product actually produced by the reaction. A theoretical yield is the amount of product that you calculate from the reaction equation according to the product and reactant coefficients
Reaction
2H₂ (g) + O₂ (g) → 2H₂O (g)
mass of H₂O (theoretical) :[tex]\tt mass=mol\times MW(mol~ratio~H_2O\div H_2=2\div 2)\\\\mass=(\dfrac{2}{2}\times \dfrac{13.8}{2})\times 18~g/mol\\\\mass=124.2~g[/tex]
percent yield[tex]\tt \%yield=\dfrac{87}{124.2}\times 100\%=\boxed{\bold{70\%}}[/tex]
Compare physical change and chemical change in terms of the arrangement of the particles and the changes in number of atoms or types of atoms?
Answer:
Don not sure if you got my last email I sent you a text but different question
A gas occupies a volume of 0.444 L at 0.00C and
79.00 kPa. What is the final Kelvin temperature when
the volume of the gas is changed to 1880. mL and the
pressure is changed to 38.70 kPa?
Include unit of measurement and use proper
significant figures.
Answer:
The final temperature is 566°K
Explanation:
Given
V1 = 0.444L
T1 = 0.00°C
P1 = 79.00 kPa
V2 = 1880mL
P2 = 38.70 kPa
Required
Determine the final temperature of the gas
To answer this, we make use of idea gas law equation.
This is:
(P1V1)/T1 = (P2V2)/T2
Convert V1 to mL
V1 = 0.444L
V1 = 0.444 * 1000mL
V1 = 444mL
Convert T1 to Kelvin
T1 = 0.00°C
T1 = 0.00 + 273K
T1 = 273K
Substitute these values in the given equation.
(P1V1)/T1 = (P2V2)/T2
(79 * 444)/273 = (38.70 * 1880)/T2
35076/273 = 72756/T2
Cross Multiply
35076 * T2 = 273 * 72756
35076T2 = 19862388
Make T2 the subject
T2 = 19862388 ÷ 35076
T2 = 566K (approximated)
Hence, the final temperature is 566°K
how would one convert 36 yd to centimeters?
Answer:
3291.84 cm
Explanation:
you would multiply the amount of yards you have by 91.44, since that's how many centimeters there are in 1 yd.
Answer: it’s D
Explanation:
What mass of sulphuric acid can be made from 8g of SO3
(SO3+H2O==>H2S04)
09.8g
18.2g
Answer:
10 g H₂SO₄
General Formulas and Concepts:
Chemistry - Stoichiometry
Reading a Periodic TableUsing Dimensional AnalysisExplanation:
Step 1: Define
Given: 8 g SO₃
RxN: SO₃ + H₂O → H₂SO₄
Step 2: Identify Conversions
Molar Mass of S - 32.07 g/mol
Molar Mass of O - 16.00 g/mol
Molar Mass of H - 1.01 g/mol
Molar Mass of SO₃ - 32.07 + 3(16.00) = 80.07 g/mol
Molar mass of H₂SO₄ - 2(1.01) + 32.07 + 4(16.00) = 98.09 g/mol
Step 3: Stoichiometry
[tex]8 \ g \ SO_3(\frac{1 \ mol \ SO_3}{80.07 \ g \ SO_3} )(\frac{1 \ mol \ H_2SO_4}{1 \ mol \ SO_3} )(\frac{98.09 \ g \ H_2SO_4}{1 \ mol \ H_2SO_4} )[/tex] = 9.80042 g H₂SO₄
Step 4: Check
We are given 1 sig fig. Follow sig fig rules and round.
9.80042 g H₂SO₄ ≈ 10 g H₂SO₄
What information can a foliated metamorphic rock provide you about the conditions under which it formed?
The _____ law of thermodynamics states that when two objects of different temperature are in contact, heat energy will flow from the hotter to the cooler object.
Answer:
Second.
Explanation:
There are four types or kinds of the laws of thermodynamics, but in this question we are actually considering the second law of thermodynamics.
The second law of thermodynamics, in a simple sense means that energies can flow in an equilibrate manner. It can also be stated as the total entropy of the universe. The second law is normal refer to as Law concerning Entropy.
Thus, filling the gap in the Question above. Note that the word written in capital letters is the missing word.
"The SECOND law of thermodynamics states that when two objects of different temperature are in contact, heat energy will flow from the hotter to the cooler object."
a. Rub the magnet along the nail or knitting needle. Now try picking up the paper clip or tack. Could your nail pick it up? How many can it pick up at once?
b. Now try to make your magnet stronger by rubbing the magnet along the nail or knitting needle for a longer time. Rub only in one direction, not back and forth. This will increase the number of atoms that line up with the magnet. Try to pick up paper clips or thumbtacks. How many can it pick up now?
Answer:
ight i'll answer both rq
Explanation:
a. Rub the magnet along the nail or knitting needle. Now try picking up the paper clip or
tack. Could your nail pick it up? How many can it pick up at once?
after rubbing the magnet with the nail, it could pick up 7 small paper clips.
b. Now try to make your magnet stronger by rubbing the magnet along the nail or knitting
needle for a longer time. Rub only in one direction, not back and forth. This will increase
the number of atoms that line up with the magnet. Try to pick up paper clips or
thumbtacks. How many can it pick up now?
after rubbing it a second time but for a longer period, it could pick up around 10, almost lifting the 11th.
Answer:
A. After rubbing the magnet with the nail, it could pick up 7 small paper clips.
B. After rubbing it a second time but for a longer period, it could pick up around 10 small paper clips, almost lifting the 11th one.
What happens to the energy release of an exothermic reaction?
1.It increases the bond energy of the reactants.
2.It is released to the surroundings.
3.It raises the temperature of the reactants.
Answer:
2.It is released to the surroundings.
Explanation:
In an exothermic reaction, the energy released is to the environment. At the end of the reaction, the surrounding becomes hotter than the system where the reaction is taking place.
Heat is liberated to the surrounding in an exothermic change. At the end of this change, the surrounding becomes hotter. Examples are combustion, dissolution of substances, etc.Select the correct answer. Which substance is made of polymers? A. marble B. protein C. salt D. steel
Answer:
the answer is B proteins
Explanation:
brainliest pls
Answer:
B. protein
Explanation:
A polymer is defined as a molecule which has 'n' number of monomer units.
Similarly proteins are also polymers as they are made up of amino acids and contain a number of repeated units just like polymers.
POSSIBLE POINTS: 1
Please read the example carefully and choose the best answer below.
Marie notices that the current cleaner she is using on her shower is not cutting through the hard water build-
up that has accumulated. She decides to purchase 3 other cleaners to see if one of them will do a better job
of cutting through the stains. Marie places masking tape in the dry shower to create 5 sections for her
experiment. She sprays 3 squirts of one cleaner per section and leaves the remaining section untouched to
compare her results. After 30 minutes, and without scrubbing any of the cleaner in, she records her
observations.
In this example what is the independent variable?
Answer:
CLEANER
Explanation:
Independent variable is the variable in an experiment that is changed or manipulated by the experimenter in order to bring about a measurable response.
In this question, Marie notices that the current cleaner she is using on her shower is not cutting through the hard water build-up that has accumulated. She decides to purchase 3 other cleaners to see if one of them will do a better job of cutting through the stains. The CLEANERS being changed in this experiment is the INDEPENDENT VARIABLE.
We apply the same amount of energy to 10.0-g samples of aluminum, iron, and silver which begin at the same temperature. Rank the metals from highest to lowest temperature after the heat is applied
Answer:
Ag > Fe > Al
Explanation:
The values of the specific heat capacity of the elements are given as;
Aluminum = 0.897 J/g*K
Iron=0.449 J/g*K
Silver=0.235 J/g*K
Specific heat capacity basically refers to how much heat is required to change the temperature of a unit mass of a substance by a degree. Elements with high specific heat capacity would require higher energy compared to elements with lower values,
Aluminium (Al) has the highest specific heat capacity, hence it wold require more energy to cause a change in temperature. Aluminium would be the lowest.
Silver (Ag) has the lowest specific heat capacity hence it would require less energy to cause a change in temperature. Silver wold be the highest.
The middle would be iron (Fe).
The rank is given as;
Ag > Fe > Al
BRAINLIEST! Please help me answer the following questions:
1) How do you find the valency of an element?
2) How do you determine if an element is nuetral/an isotope/ or an ion?
If you could help with 1 or both questions I would really appreciate it :)
Explanation:
1) from the periodic table for example if u looking for K it is from the group 1A so the valancey = +1 that is mean it loses one electron to reach a stable state. and this applied for the 1A , 2A, 3A groups.
if u looking for N it is from group 5A so its valency is -3
so it gain 3 electrons to reach a stable state to complete its orbital to 8 electrons. this applied to 5A, 6A,7A
for the transition metals and simimetals other rules.
2) neutral if the element does not hold any charge like
H2, O2, N2, Fe, Au, Cu ...
isotope : if the 2 elements have same symbol and atomic number but they differ in the mass number because the have different numbers of neutrons.
if the element is charged then it is considered as an ion ex: Fe2+ then it is iron cation ( +ion)
F- then it is fluoride anion (-ion)
if u have any doubt just writ a comment ( ;
Find the mass (in grams) of 1.5 moles of BaSO4
Answer:
350 g BaSO₄
General Formulas and Concepts:
Chemistry - Stoichiometry
Reading a Periodic TableUsing Dimensional AnalysisExplanation:
Step 1: Define
1.5 mol BaSO₄
Step 2: Identify Conversions
Molar Mass of Ba - 137.33 g/mol
Molar Mass of S - 32.07 g/mol
Molar Mass of O - 16.00 g/mol
Molar Mass of BaSO₄ - 137.33 + 32.07 + 4(16.00) = 233.4 g/mol
Step 3: Convert
[tex]1.5 \ mol \ BaSO_4(\frac{233.4 \ g \ BaSO_4}{1 \ mol \ BaSO_4} )[/tex] = 350.1 g BaSO₄
Step 4: Check
We are given 2 sig figs. Follow sig fig rules and round.
350.1 g BaSO₄ ≈ 350 g BaSO₄
Is Steel a compound?
Steel is a mixture of iron and carbon fused together with one or more other metals or nonmetals. Because steel is a mixture rather than a chemical compound, steel does not have a set chemical compound formula.
Answer:
No
Explanation:
Steel is a mixture of iron and carbon fused together with one or more other metals or nonmetals. Because steel is a mixture rather than a chemical compound, steel does not have a set chemical compound formula.
Help please! Tell me which one goes where.
Answer:
human-F
chicken-D
rabbit-E
tortoise-C
salamander-B
fish-A
Explanation:
hope this helped!!
I tried my best!!
please mark me as brainliest
HAVE A GREAT DAY <3
Answer:
D Tortoise
B Salamander
A Fish
C Chicken
F Human
E Rabbits
Explanation:
I Really have an Explanation
What are the parts of an electron configuration?
Answer:
Explanation:
electronic confirmation=1s^2,2S^2,2P^6,3S^2
atomic no.is 12 therefore :- this is magnesium
Period=3
Block=s-block
Group=II A
PLEASE HELPPP
A(n) _________is a
group of atom. joined by chemical bonds.
THIS IS SCIENCE NOT CHEMISTRY
Answer; molecule
Explanation:
I'm a bit stupid, that's why I'm going to ask for help, can you be nice and help me? Thank you
Explanation:
ion
valence electrons
isotope
covalence
ionic
For a certain chemical reaction, the bond energy of the reactants is 43 kJ, and 35 kJ of energy is released. For energy to be conserved, what is the bond energy of the products?
Answer:
78kJ
Explanation:
Energy change = Energy in (reactants) - Energy out (products)
According to this question, energy is released, meaning that the reaction is EXOTHERMIC. Hence, the energy change will be negative (-) i.e bond energy of reactants is greater than bond energy of products.
Energy in = bond energy of reactants = 43kJ
Energy out = bond energy of products = ?
Energy change of exothermic reaction = -35kJ
Therefore;
-35kJ = 43kJ - x
x = 35kJ + 43kJ
x = 78kJ
The bond energy of the products is 78kJ.
Which of these changes is a chemical change?
A. A block of ice forms liquid water when salt is sprinkled on it.
B. A block of ice is crushed into small pieces.
C. A block of ice melts when heated.
D. A block of ice fizzes and forms a gas when sodium is sprinkled on
it.
please help :)