Which image represents ether? Check all that apply.

Given the reaction N2 + 3H2 -->2NH3, what volume of hydrogen is necessary to react with five liters of nitrogen to produce ammonia, assuming constant temperature and pressure? How would you calculate the mass in grams of hydrogen chloride produced when 4.9 L of molecular hydrogen at STP reacts with an excess of chlorine gas.?

maybe umm think so pick think so

I'm gonna guess E on this one, but I think you should choose either E or A

Answer:

Explanation:3.2 ft 2 fti2 ft 4 ft ft2

Explanation:

Intermolecular forces hold multiple molecules together and determine many of a substance's properties. All of the attractive forces between neutral atoms and molecules are known as van der Waals forces, although they are usually referred to more informally as intermolecular attraction.

Intermolecular forces are the forces of attraction or repulsion which act between neighboring particles (atoms, molecules, or ions ). These forces are weak compared to the intramolecular forces, such as the covalent or ionic bonds between atoms in a molecule.

Answer: The concentration of [tex]NO_{2}[/tex] in the given equilibrium mixture is 0.0545 M.

Explanation:

The ratio of concentration of products and reactants raised to the power of their coefficients is called equilibrium constant. The symbol used to denote equilibrium constant is [tex]K_{eq}[/tex].

As the given reaction equation is as follows.

[tex]2NO_{2}(g) \rightleftharpoons N_{2}O_{4}(g)[/tex]

The expression for equilibrium constant of this reaction is as follows.

[tex]K_{eq} = \frac{[N_{2}O_{4}]}{[NO_{2}]^{2}}[/tex]

Now, substitute the given values into above formula as follows.

[tex]K_{eq} = \frac{[N_{2}O_{4}]}{[NO_{2}]^{2}}\\67.3 = \frac{(0.2)}{[NO_{2}]^{2}}\\So, [NO] = \sqrt{\frac{0.2}{67.3}}\\= 0.0545 M[/tex]

Thus, we can conclude that the concentration of [tex]NO_{2}[/tex] in the given equilibrium mixture is 0.0545 M.

Answer:

The heat of reaction is the energy that is released or absorbed when chemicals are transformed in a chemical reaction. It describes the change of the energy content when reactants are converted into products.

Explanation:

Yeah, that would confuse me a bit but then you read it and then you will get that answer above! Have a great rest of your day!

Answer: There are [tex]145 \times 10^{23}[/tex] atoms in 24 moles of Fe.

Explanation:

According to the mole concept, 1 mole of a substance contains [tex]6.022 \times 10^{23}[/tex] atoms.

Therefore, atoms present in 24 moles of Fe are calculated as follows.

[tex]24 mol \times 6.022 \times 10^{23} atoms/mol\\= 144.52 \times 10^{23} atoms\\or, 145 \times 10^{23} atoms[/tex]

Thus, we can conclude that there are [tex]145 \times 10^{23}[/tex] atoms in 24 moles of Fe.

Answer:

A ⟶ A⁺ + e⁻

AH + B ⟶ A + BH

A + BO ⟶ AO + B

A + e⁻ ⟶ A⁻

A + BH ⟶ AH + B

AO + B ⟶ A + BO

-TheUnknownScientist

Answer:

D Fracture

Explanation:

jus took the test

Answer:

P₄ + 6 H₂ ⇒ 4 PH₃

Explanation:

Let's consider the unbalanced reaction that takes place when phosphorus reacts with hydrogen to form phosphine. This is a synthesis reaction.

P₄ + H₂ ⇒ PH₃

We will balance this reaction using the trial and error method. First, we will balance P atoms by multiplying PH₃ by 4.

P₄ + H₂ ⇒ 4 PH₃

Finally, we get the balanced equation by multiplying H₂ by 6.

P₄ + 6 H₂ ⇒ 4 PH₃

Answer:

We often want to decrease the rates of certain reactions rather than speeding them up. For example, to prolong the shelf lives of certain foods, the chemical reactions by which they spoil must be slowed down.

Answer:

Taxonomy

Explanation:

Answer:

A. It secretes hormones that regulate blood sugar levels.

Explanation:

The pancreas is the organ that helps in the process of digestion of the food. The location of the pancreas is in the abdomen. It helps in the process of digestion of the food and regulating the blood sugar level in the body. It helps in regulating and controlling the glucose level in the body during the process of digestion. Pancreas produces enzymes that are useful in the process of digestion.

Answer:

A

Explanation:

Answer:

9.18g

Explanation:

Step 1: Write the reduction half-reaction

Au³⁺(aq) + 3 e⁻ ⇒ Au(s)

Step 2: Calculate the mass of gold is produced when 15.0A of current are passed through a gold solution for 15.0min

We will use the following relationships:

The mass of gold produced is:

[tex]15.0 min \times \frac{60s}{1 min} \times \frac{15.0C}{1s} \times \frac{1 mol e^{-} }{96486C} \times \frac{1molAu}{3 mol e^{-} } \times \frac{196.97gAu}{1molAu} = 9.18gAu[/tex]

Explanation:

Answer:

B

Explanation:

Answer: I believe the answer is d)  the rock crumbles at an ocean ridges

Explanation:

Answer:

d- The resulting pH will be equal to 7 because a strong base will neutralize a strong acid.

Explanation:

The reaction between potassium hydroxide and hydrochloric acid of equal volume and equal concentration yields a solution of pH 7 at equivalence point. We must note that KOH is a strong base while HCl is a strong acid. This fact influences the pH of the system at equivalence point.

Owing to the fact that the acid is exactly neutralized by the base; at the equivalence point of such titration, it is expected that hydrogen ions(H+) and hydroxide ions (OH-) must have reacted to form water, this leads to a final pH of 7.  

Answer:

A) Chocolate Milk

Explanation:

A homogeneous mixture is one that is made of one substance. Technically, none of these are, but chocolate milk would be the closest. Pizza has cheese, pepperoni, and crust. Chocolate chip cookies have chips and the cookie. Peanut butter sandwiches have peanut butter and bread. Therefore, chocolate milk is right, as it has no other parts.

Answer:

ako po kailangan ko po nga ayuda

Explanation:

thanks for the points ❤️

Answer:

1. The gas law used: Dalton's law of partial pressure.

2. Pressure of nitrogen = 331 mmHg

Explanation:

From the question given above, the following data were obtained:

Total pressure (Pₜ) = 592 mmHg

Pressure of Oxygen (Pₒ) = 261 mmHg

Pressure of nitrogen (Pₙ) =?

The pressure of nitrogen in the sample can be obtained by using the Dalton's law of partial pressure. This is illustrated below:

Pₜ = Pₒ + Pₙ

592 = 261 + Pₙ

Collect like terms

592 – 261 = Pₙ

331 = Pₙ

Pₙ = 331 mmHg

Therefore, the pressure of nitrogen in the sample is 331 mmHg

Answer: The standard state refers to 1 atm and [tex]25^{o}C[/tex].

Explanation:

It is known that a chemical/substance can either be present in a solid, liquid or gaseous state.

So, when the phase of a substance like solid, liquid or gas is present at 1 atmosphere pressure and at a temperature of [tex]25^{o}C[/tex] then it known as standard state of substance.

Thus, we can conclude that standard state refers to 1 atm and [tex]25^{o}C[/tex].

Answer:

Explanation:all

Answer: The rate of the reaction decrease over time as the reaction proceeds, a decrease in the concentration of reactants results in fewer successful collisions.  

Explanation:

Rate of a reaction is defined as the change in concentration of products and reactants with respect to time.

The rate of a reaction decreases with times because reactants are converting into products.

As a result, the reaction is proceeding with a decrease in the concentration of reactants due to which less number of collisions between the reactant molecules will be there.

Hence, rate of reaction will decrease.

Thus, we can conclude that the rate of the reaction decrease over time as the reaction proceeds, a decrease in the concentration of reactants results in fewer successful collisions.  

Answer:

Reeling is the only process not listed.

The correct answer is option D: Reeling​.

Wool is obtained from sheep. The wool so obtained is processed according to the following flow chart;

Shearing → Scouring → Sorting → Dyeing → Straightening, Rolling and Combing

Shearing is the removal of the fleece and thin skin of the sheep. Scouring is the process of washing the hair to remove grease, dust, and dirt. Sorting is the process of differentiating the fibers.

Hence, reeling is not a process in wool extraction.

https://brainly.com/question/9968125

Answer:

moles MgCl₂ = 5.97 moles

Explanation:

First, let0s write the overall reaction that is taking place here:

Mg(OH)₂ + HCl ----------> MgCl₂ + H₂O

Now, we need to balance this reaction:

Mg(OH)₂ + 2HCl ----------> MgCl₂ + 2H₂O

Now, the exercise already stated that the HCl is in excess, so we can assume the magnesium hydroxide is the limiting reactant. If this is true, then, to get the moles of MgCl₂ produced, all we need to do is calculate the moles of Mg(OH)₂ that reacted, using the following expression:

moles = mass / MM

The atomic weights for Mg, O and H are:

Mg: 24.305 g/mol;  H: 1 g/mol;  O = 15.999 g/mol

Let's determine the molar mass of Mg(OH)₂:

MM = 24.305 + (2 * 15.999) + (2 * 1) = 58.303 g/mol

Now, let's determine the moles:

moles = 348 g / 58.303 g/mol = 5.97 moles of Mg(OH)₂

As we can see in the overall reaction, there is a mole ration between Mg(OH)₂ and MgCl₂ of 1:1, that's why we can conclude that the moles of Mg(OH)₂ would be the same moles of MgCl₂:

Hope this helps

Answer: Anode: [tex]Pb+SO_4^{2-}\rightarrow PbSO_4+2e^-[/tex]

Cathode: [tex]PbO_2+4H^++SO_4^{2-}+2e^-\rightarrow PbSO_4+2H_2O[/tex]

Overall cell reaction : [tex]Pb+2SO_4^{2-}+PbO_2+4H^+\rightarrow 2PbSO_4+2H_2O[/tex]

Explanation:

Lead storage battery is a secondary cell used in automobiles and invertors. The anode is made up of lead and undergoes oxidation during discharging and cathode is made up of lead oxide and acts as cathode during discharging. The electrolyte used is dilute .

Lead storage battery acts as electrochemical cell while discharging.

Discharging reaction for  Anode:

Discharging reaction for  Cathode: [tex]PbO_2+4H^++SO_4^{2-}+2e^-\rightarrow PbSO_4+2H_2O[/tex]

Overall cell reaction : [tex]Pb+2SO_4^{2-}+PbO_2+4H^+\rightarrow 2PbSO_4+2H_2O[/tex]

A lead storage battery is an energy storage device. At the anode lead and sulfate ion reacts to produce Lead(II) sulfate and release two electrons.

In secondary cells or the recharge-discharge cells during recharge, the positive electrode is the anode, while during discharge cathode is the positive electrode.

The anode (lead) of the cell undergoes an oxidation reaction during the discharge, whereas the lead oxide or the cathode undergoes reduction.

The discharging reaction at the anode of the cell is given as,

[tex]\rm Pb + SO_{4}^{2-} \rightarrow PbSO_{4} + 2e^{-}[/tex]

The discharging reaction at the cathode of the cell is given as,

[tex]\rm PbO_{2} + 4H^{+} + SO_{4}^{2-} + 2 e^{-} \rightarrow PbSO_{4} + 2H_{2}O[/tex]

The overall cell reaction is given as,

[tex]\rm Pb + 2SO_{4}^{2-} + PbO_{2} + 4H^{+} \rightarrow 2PbSO_{4} + 2H_{2}O[/tex]

Therefore, the gain and loss of electrons are represented at the cathode and the anode of the cell.

Learn more about discharge battery here:

https://brainly.com/question/8341588