Answer:
Its Generation of Heat. or "D"Explanation:
Friction causes generation of heat and causes increased wear and tear.
The friction is a resistive force and is related to heat energy, so an increase in friction results in the generation of heat, so option D is correct.
What is friction?Two solid objects cannot roll or slide over one another due to the force of friction. Although frictional forces can be useful, such as the traction needed to walk without slipping, they can also present a large degree of resistance to motion. Automobile engines need about 20% of their power to overcome frictional forces in moving parts.
The fundamental source of friction between metals appears to be the adhesion forces between the contact zones of the surfaces, which are always microscopically uneven. Friction is produced by shearing, these "welded" seams, and the rubbing action of the rougher, tougher surface against the softer, smoother surface.
The friction is a resistive force trying to oppose the force applied As friction is related to heat when we increase the heat, the friction increases, and vice versa.
To know more about Friction:
https://brainly.com/question/28356847
#SPJ6
Two runners start at a distance of 10 miles from each other. They run towards each other at a constant velocity of 5 mph. A fly takes off from runner one’s nose at time zero. The fly has a constant velocity of 20 mph and flies between the runners. Find the total distance that the fly has traveled when the runners collide.
Answer:
The fly will travel 20 miles before the runners collide with each other.
Explanation:
Since the runners are both traveling at the same speed, they will meet and collide in the exact middle of each other which is 5 miles away from their starting point. Since they are traveling at 5 mph, it will take exactly one hour before they collide. The fly is going 20 mph so it will travel 20 miles before the runners collide in one hour.
Determine whether or not each of the following statements is true. If a statement is true, prove it. If a statement is false, provide a counterexample and explain how it constitutes a counter-example.
A capacitor consists of two flat, metal plates with unequal areas. Each of the plates starts neutral, and then each plate is connected to a dierent terminal of a battery. After some time, the plates will have excess charge on them, and the magnitude of the excess charge on one plate will equal the magnitude of the excess charge on the other plate.
A. True
B. False
If a wire carries current, then it has a net non-zero charge in it.
A. True
B. False
Answer:
a) True b) True
Explanation:
a) a capacitor is made up of two flat plates and each one has a charge of the same sign, therefore the statement is true
b) the current is the flow of electrons per unit of time, therefore the charge is not zero, therefore the statement is True
Which force is there between an ice skate and the ice
A vertical bar consists of three prismatic segments A1, A2, and A3 with cross-sectional areas of 6000 mm2 , 5000 mm2 , and 4000 mm2 , respectively. The bar is made of steel with E 5 200 GPa. Calculate the displacements at points B, D
Answer and Explanation:
For computing the displacement at point B and D we need to determine the following calculations
[tex]P_Net = P_C + P_E + P_B[/tex]
= 250 + 350 - 50
= 550 N
Now the deflection for bar AB is
[tex]\delta_{AB} = \frac{PL_{AB}}{AE} \\\\ = \frac{550 \times 500}{6,000 \times 200 \times 10^{3}}[/tex]
[tex]= 2.292 \times 10^{-4} mm[/tex]Now for bar BC it is
[tex]\delta_{BC} = \frac{PL_{BC}}{AE} \\\\ = \frac{(550 + 50) \times 250}{5,000 \times 200 \times 10^{3}} \\\\ = 1.5 \times 10^{-04} mm[/tex]
And for bar CD it is
[tex]\delta_{CD} = \frac{PL_{CD}}{AE} \\\\ = \frac{(550 -250 + 50) \times 250}{5,000 \times 200 \times 10^{3}} \\\\ = 0.875 \times 10^{-4} mm[/tex]
Now the displacement is as follows
For B
2.292 × 10^{-4} mm
For D, it is
[tex]= 2.292 \times 10^{-4} + 1.5 \times 10^{-4} + 0.875 \times 10^{-4} mm \\\\ = 4.667 \times 10^{-4} mm[/tex]
We simply applied the above formulas for determining the displacements at points B, D and the same is to be considered
Energy of the fossil fuels is also derived from solar energy. Give reason.
Answer:
Explanation:
All the energy in oil, gas, and coal originally came from the sun, captured through photosynthesis. In the same way that we burn wood to release energy that trees capture from the sun, we burn fossil fuels to release the energy that ancient plants captured from the sun
what is the meaning of physics
Answer:
the branch of science concerned with the nature and properties of matter and energy
List the submultiples and multiple units of length, mass, and time with respect to real-life situations. How are these units are related to S I unit of the above mentioned physical quantity?
Answer:
Explanation:
In physics, there are two types of physical quantities namely the fundamental and the derived quantities. Fundamental quantities are independent quantities on which derived quantities depends on. Length, mass and time are examples of fundamental quantities.
The SI unit of length is meters. A meter is a multiple unit. Its submultiple units are centimetres (10⁻²metres), kilometres (10³metres), decimetres (10⁻¹metres) etc
The SI unit of mass is kilogram (kg). The only sub multiple unit used in real-life situation is grams.
1 kg = 100 grams
The SI unit of time is seconds. The multiple units are the minutes, hours, weeks, days and years.
1 minute = 60 seconds
1 hour = 3600 seconds
1 day = 24 * 3600 = 86,400 secs
If three cars, each of mass 1000 kg , occupy the NE, SE, and SW corners, determine the coordinates of the CM of the loaded ferryboat relative to the center of the raft. Take the origin to be at the CM of the raft.
Answer:
Using X = sum( x's * mass)/sum( masses)
= [(0)*(6400)+ (-9.5*1000) + (9.5)*(1000) + (9.5)*(1000)]/(6400+1000+1000+1000)
= 1.01 m
Y = sum( y's * mass)/sum( masses)
= [(0)*(6400) + (9.5)*(1000) +(-9.5)*(1000) + (-9.5)*(1000)]/ (6400+1000+1000+1000)
= -1.01 m
The robot HooRU is lost in space, floating around aimlessly, and radiates heat into the depths of the cosmos at the rate of 13.5 W. HooRU's surface area is 1.51 m^2 and the emissivity of its surface is 0.209. Ignore the radiation HooRU absorbs from the cold universe. What is HooRU's temperature?
Answer:
165.73 K
Explanation:
The computation of HooRU's temperature is shown below:-
As per the stefan's law, the power radiated by black body radiations which is
[tex]P = eA\sigma T^4[/tex]
where
A indicates surface area
e indicates emissitivity
T indicates temperature
now, we will put the values in the above equation
[tex]13.5 = 0.209 \times 1.51 \times \sigma \times T^4[/tex]
After solving the above equation we will get temperature which results
= 165.73 K
Therefore for computing the HooRU's temperature we simply applied the above formula.
2. A solid sphere and a solid cylinder, both uniform and of the same mass and radius, roll without slipping at the same forward speed. It is correct to say that the total kinetic energy of the solid sphere is A) more than the total kinetic energy of the cylinder. B) less than the total kinetic energy of the cylinder. C) equal to the total kinetic energy of the cylinder.
On his fishing trip Justin rides in a boat 12 km south. The fish aren’t biting so they go 4 km west. They then follow a school of fish 1 km north. What distance did they cover? What was their displacement?
Answer:
I think the answer is 8km2
Answer:
Distance = 17km
Displacement = 12.6 km
Explanation:
south 12km
west 4km
north 1km
Total distance = 12 + 4 + 1 = 17km
Total displacement = in picture above.
which discribes what a velocity/time graph would look like with no accelaration
An object weighs 0.250 kgf in air, 0.150 kgf in water and 0.125 kgf in an oil.
Find out the density of the object and the oil.
Answer: Upthrust = Weight - Apparent weight
= 0.250 kgf - 0. 150 kgf
= 0.100 kgf
Density = mass / volume
volume = mass / density
= 0.100 kg / (1000 kg / m³)
= 0.0001 m³
density of object = mass / volume
= 0.250 kg / 0.0001 m³
= 2500 kg / m³
upthrust of oil = Weight - Apparent weight
= 0.250 kgf - 0.125 kgf
= 0.125 kgf
density = mass / volume
= 0.125 kg / 0.0001 m³
= 1250 kg/m³
density of the object = 2500 kg / m³
density of oil = 1250 kg / m³
This mathematical model describes the changes that occur in a sample of
water as its temperature increases. Use this model to predict what will
happen to the motion of the molecules in a sample of water that is being
heated from 50° to 100°C.
200°C
vaporization
150°C
melting
100°C
Temperature (°C)
water vapor
50°C
liquid water
0°C-
--50°C
10
20
ice
30
Time (min)
40
50
60
70
O A. The motion will change very little.
O B. The molecules will stop moving.
O C. The movement of the molecules will gradually decrease.
O D. The movement of the molecules will gradually increase.
The correct answer is D. The movement of the molecules will gradually increase.
Explanation:
At the beginning of the model the state of matter of the water is solid, in this, particles have a defined arrangement and are together, which stops particles from moving freely and only allows them to vibrate. However, as the substance is heated the thermal energy (heat) increases in the sample, this causes particles to move more and the arrangement of it changes. Due to this, when the ice melts and there is liquid water particles move more than in solid states, which makes ice lacks a defined shape. Moreover, as the heat continues to increase the thermal and kinetic energy (movement) increases, indeed in gas state (water vapor) particles will move freely. This means the movement or kinetic energy in particles gradually increases in the model.
Answer: D
Explanation:
the velocity is always _____ to the line of a circle
Answer:
tangent
Explanation:
hope it helps
Answer:
the answer is tangent
Explanation:
tangent means a straight line or plane that touches a curve or curved surface at a point, but if extended does not cross it at that point.
hope this helps please like and heart this answer and give 5 stars and brainliest pls i beg u thx!!! : )
A ball is thrown vertically upwards from the roof of a building with an initial velocity of 30 m / s. If it stops in the air 220 m above the ground, what is the height of the building?
Answer:
175 m
Explanation:
Given:
y = 220 m
v₀ = 30 m/s
v = 0 m/s
a = -10 m/s²
Find: y₀
v² = v₀² + 2a (y − y₀)
(0 m/s)² = (30 m/s)² + 2 (-10 m/s²) (220 m − y₀)
y₀ = 175 m
Tech A says that an overdrive gear ratio means the input gear turns faster than the output gear. Tech B says that overdrive ratios provide less torque output than underdrive ratios. Who is correct?
Answer:
Technician B only is correct
Explanation:
The gear ratio is the ratio of the output speed to the input speed such that an overdrive gear ratio of more than 1:1, having more speed per speed of engine rotation RPM
Overdrive ratios conditions is one where the vehicle wheels and speed is faster at a given engine rotation, such that there is fuel efficiency is increased as the engine rotation is low for a given speed and distance of travel.
If 2N force is applied on 2 kg mass due east and same magnitude of force due west, thechange in velocity of the body in 2 sec is
Explanation:
F=m(v-u)/t
F=2N
m=2kg
t=2s
2=2(v-u)/2
cross multiply
2*2=2(v-u)
4=2(v-u)
4/2=v-u
v-u=2m/s
v-u is the change is velocity.
The change in velocity of the body in 2 sec is 2m/s
According to Newton's second law which states that the change in momentum of an object is directly proportional to the applied force.
Mathematically:
[tex]F \ \alpha \ (\dfrac{v-u}{t} )[/tex]
[tex]F = m (\dfrac{v-u}{t} )[/tex]
where:
m is the mass
(v - u) is the change in velocity
t is the time
F is the applied force
Given the following:
mass m = 2kg
time t = 2secs
Force F = 2N
Required
Change in velocity (v-u)
Substitute the given parameters into the expression shown above:
[tex]2=2(\dfrac{v-u}{2})\\ 2 \times 2=2(v-u)\\4=2(v-u)\\v-u=\dfrac{4}{2}\\v-u=2m/s\\[/tex]
Hence the change in velocity of the body in 2 sec is 2m/s.
Learn more here: https://brainly.com/question/3232705
Which of the following statements are true? (mark all that apply)
A) Adaptive optics corrects for atmospheric distortion by following the distortion of a bright star, possibly an artificial star created by a laser, and rapidly changing the shape of a mirror using computer-controlled actuators to compensate for the distortion.
B) Improvements in technology will eventually allow the entire electromagnetic spectrum to be observed from high mountaintop observatories.
C) X rays from astronomical objects can only be detected from telescopes in space or in high altitude rockets.
D) The best observing sites for optical telescopes are atop remote mountains.
E) Radio telescopes must be carried to high altitudes by balloons in order to detect this type of radiation.
Answer:
The answer(s) for this question are as followed: A, C, & D
Explanation:
I hope this helped, let me know if i missed any.
Can anyone tell me how to read a micrometer screw gauge I want very clear instructions.
Explanation:
Things you need to know:
Accuracy refers to the maximum error encountered when a particular observation is made.
Error in measurement is normally one-half the magnitude of the smallest scale reading.
Because one has to align one end of the rule or device to the starting point of the measurement, the appropriate error is thus twice that of the smallest scale reading.
Error is usually expressed in at most 1 or 2 significant figures.
Tape
Equipment: It is made up of a long flexible tape and can measure objects or places up to 10 – 50 m in length. It has markings similar to that of the rigid rule. The smallest marking could be as small as 0.1 cm or could be as large as 0.5 cm or even 1 cm.
How to use: The zero-mark of the measuring tape is first aligned flat to one end of the object and the tape is stretched taut to the other end, the reading is taken where the other end of the object meets the tape.
Ruler
Equipment: It is made up of a long rigid piece of wood or steel and can measure objects up to 100 cm in length. The smallest marking is usually 0.1 cm.
How to use: The zero-end of the rule is first aligned flat with one end of the object and the reading is taken where the other end of the object meets the rule.
Vernier Caliper
Equipment: It is made up of a main scale and a vernier scale and can usually measure objects up to 15 cm in length. The smallest marking is usually 0.1 cm on the main scale.
It has:
a pair of external jaws to measure external diameters
a pair of internal jaws to measure internal diameters
a long rod to measure depths
How to use: The jaws are first closed to find any zero errors. The jaws are then opened to fit the object firmly and the reading is then taken.
Micrometer Screw Gauge
Equipment: It is made up of a main scale and a thimble scale and can measure objects up to 5 cm in length. The smallest marking is usually 1 mm on the main scale (sleeve) and 0.01 mm on the thimble scale (thimble). The thimble has a total of 50 markings representing 0.50 mm.
It has:
an anvil and a spindle to hold the object
a ratchet on the thimble for accurate tightening (prevent over-tightening)
How to use: The spindle is first closed on the anvil to find any zero errors ( use the ratchet for careful tightening). The spindle is then opened to fit the object firmly (use the ratchet for careful tightening) and the reading is then taken.
Suppose the maximum safe intensity of microwaves for human exposure is taken to be 1.00 W/m2. (a) If a radar unit leaks 50.0 W of microwaves (other than those sent by its antenna) uniformly in all directions, how far away (in cm) must you be to be exposed to an intensity considered to be safe
Answer:
The safe distance is 199 cm approximately 200 cm
Explanation:
Safe intensity = 1.00 W/m^2
wattage of radar leaked radar = 50.0 W
safe distance from the microwave will be = ?
We know that the intensity of a wave radiated uniformly in all direction is given as
[tex]I[/tex] = [tex]\frac{W}{A}[/tex]
where
W is the wattage of the leaked radar
A is the radial area, which is the area of a sphere that encapsulates the region through which this wave spreads uniformly.
From the equation above,
[tex]A[/tex] = [tex]\frac{W}{I}[/tex] = 50/1 = 50 m^2
But the area of this sphere [tex]A[/tex] = [tex]4\pi r^{2}[/tex]
where
r is the safe distance from the radar source
substituting for the area, we have
50 = 4 x 3.142 x [tex]r^{2}[/tex]
50 = 12.568 [tex]r^{2}[/tex]
[tex]r^{2}[/tex] = 50/12.568 = 3.978
r = [tex]\sqrt{3.978}[/tex] = 1.99 m = 199 cm ≅ 200 cm
A horizontal spring with spring constant 210 Nm is compressed by 20 cm and then used to launch a 250 g box across the floor. The coefficient of kinetic friction between the box and the floor is 0.23. What is the box's launch speed?
Answer:
ugmd = 1/2 kx²
d = (1/2 kx²) / (ugm)
= (1/2 * 250 N/m * (0.2 m)²) / (0.23 * 9.81 m/s² * 0.3 kg)
= 7.4 m
ugmd = 1/2 mv²
v = √2ugd
= √(2(0.23)(9.81 m/s²)(7.4 m)
= 5.8 m/s
Explanation:
The box's launch speed is 5.8 m/s.
What is energy?Energy is the ability or capability to do tasks, such as the ability to move an item (of a certain mass) by exerting force. Energy can exist in many different forms, including electrical, mechanical, chemical, thermal, or nuclear, and it can change its form.
Given in question spring with spring constant 210 Nm is compressed by 20 cm and then used to launch a 250 g box across the floor,
ugmd = 1/2 kx²
d = (1/2 kx²) / (ugm)
= (1/2 * 250 N/m * (0.2 m)²) / (0.23 * 9.81 m/s² * 0.3 kg)
= 7.4 m
ugmd = 1/2 mv²
v = √2ugd
= √(2(0.23)(9.81 m/s²)(7.4 m)
= 5.8 m/s
The box's launch speed is 5.8 m/s.
To learn more about energy refer to the link:
brainly.com/question/1932868
#SPJ5
Which of these are scientific questions? Check all that apply. How will climate change affect forests? Which planet is the prettiest? How did life on Earth begin? Why did dinosaurs go extinct? Which volcano is the most amazing?
Answer:
The scientific questions here are:
a) How will climate change affect forests
b) How did life on Earth begin
c) Why did dinosaurs go extinct
Explanation:
Scientific question are logical quantifiable questions, whose answers can be measured. A good scientific question must have answers that can be tested by a carefully designed experiment or measurement. Some qualities like "prettiest" and "amazing" cannot be tested for nor are they measurable, and hence, they do not make a testable component of good scientific question.
Research have found that other than for reasons of hunger, American women eat when they are depressed ,whereas Japanese women eat because of social demands.They found no significant differences between american and japanese men. These results demonstrate that ________ and _______ must be taken into account when studying why and under what circumstances people eat.
Answer:
culture
food
Explanation:
The above mentioned studied the interaction between food and culture. Food habits reflect different meanings in different cultures. As per the question, the United States America and Japan are two countries far away from each other, which have distinct cultures and gave rise to different eating norms. However, the impact of media have been shaping the eating patterns around the globe, which have brought different food and cultures together.
A rocket is launched vertically from the ground with an initial velocity of 64. Write a quadratic function that shows the height, in feet, of the rocket t seconds after it was launched.
Answer:
y = 64t − 16t²
Explanation:
y = y₀ + v₀ t + ½ at²
y = 0 + 64 t + ½ (-32) t²
y = 64t − 16t²
Earthquakes at fault lines in Earth's crust create seismic waves, which are longitudinal (P-waves) or transverse (S-waves). The P-waves have a speed of about 9 km/s. Estimate the average bulk modulus of Earth's crust given that the density of rock is about 2500 kg/m3
Answer:
[tex]B=2.025\times 10^{11}\ Pa[/tex]
Explanation:
It is given that,
Speed of P- waves, v = 9 km/s = 9000 m/s
The density of rock is about [tex]2500\ kg/m^3[/tex]
We need to find the average bulk modulus of Earth's crust. Let it is given by B. So,
[tex]v=\sqrt{\dfrac{B}{d}} \\\\B=v^2d\\\\B=(9000)^2\times 2500\\\\B=2.025\times 10^{11}\ Pa[/tex]
So, the bulk modulus of the Earth's crust is [tex]2.025\times 10^{11}\ Pa[/tex].
Which of the following does each different kind of atom represent?
O A. A nucleus
O B. An element
O C. An electron
OD. A neutron
Answer:
B
Explanation:
because atoms make up an element.
Answer:
B
Explanation:
it's b because an element makes up an atom and signifies the number of element in atom e.g (H2) the two signifies the number of atoms
Proved that
V = u+at
Answer:
[tex]\sf Proof \ below[/tex]
Explanation:
We know that acceleration is change in velocity over time.
[tex]\sf a=\frac{\triangle v}{t}[/tex]
[tex]\sf a=\frac{v-u}{t}[/tex]
v is the final velocity and u is the initial velocity.
Solve for v.
Multiply both sides by t.
[tex]\sf at=v-u[/tex]
Add u to both sides.
[tex]\sf at + u=v[/tex]
Answer:
Acceleration = v-u/t when we flip -u and t to right hand side
then -u changes to plus and denominator t changes to numerator
then then this equations becomes v=u+at
Explanation:
Q. A train accelerates from 36 km/h to 54 km/h in 10 sec. (i) Acceleration (ii) The distance travelled by car.
u=10m/s
v=15m/s
acceleration=
v_u/ t
5/10
0.5
What is the magnetic force on a particle that has 0.000500 C of charge and is moving at
2.50 10m/s to the right through a magnetic field that is 4.20 T and pointing away from
you? Specify both magnitude and direction in your answer.
Answer:
1.) F = 5.3×10^-3 N
2.) Positive y - direction
Explanation:
The parameters given are:
Charge q = 0.0005C
Velocity V = 2.5010 m/s
Magnetic field B = 4.2 T
Magnetic force F = BVqsinØ
F = BVq
since Ø = 90 degree
Substitute all the parameters into the formula
F = 4.2 × 2.5010 × 0.0005
Therefore, the magnetic force on a particle is F = 5.3 × 10^-3 N
2.) According to Fleming's left hand rule, the direction of the magnetic force will be perpendicular to the magnetic field which moving upward of the screen.
Answer:
it’s f=0.0005 x 2.5 x 10^5 x 4.20
F= 525 N
+ y direction (up)
Explanation:
got it right