Which object would have more momentum?

A 2 kg ball rolling at 4 m/s

A 5 kg ball rolling at 2 m/s

(Hint: Use momentum = mass * velocity)

a
Not enough information to determine which ball has more momentum.
b
They have the same momentum.
c
The 2 kg ball will have more momentum.
d
The 5 kg ball will have more momentum.

Answers

Answer 1

Answer:

b is the ans......

Explanation:

"b" (and any subsequent words) was ignored because we limit queries to 32 words.


Related Questions

(0.50kg)(6.0mls)+(1.00kg)(-12.00mls)

Answers

Answer:

-9.0 × 10-6 m3 kg

Explanation:

I'm not sure if that's what you're looking for nor do I know how to explain it.

A ball is launched from ground level at 30 m/s at an angle of 35° above the horizontal. how far does it go before it is at ground level again

Answers

Answer:

Explanation:

Ignoring air resistance

Initial vertical velocity is 30sin35 = 17.2 m/s

Gravity reduces this velocity to zero in a time of

t = v/g =17.2 / 9.8 = 1.755 s

it takes the same time to come back down to ground level for a total flight time of 2(1.755) = 3.51 s

The horizontal velocity is 30cos35 = 24.57 m/s

the distance traveled horizontally is

d = vt = 24.57(3.51) = 86.298... = 86 m

4 points
This machine has a sharp edge and helps spread or cut something

Answers

Knife
Has a sharp edge and can cut bread or fruit and can spread butter or jam

What is Acceleration?​

Answers

Answer:

Depends on what are you looking at. All of the following are valid definitions, it just depends on which way you are analizing the problem.

From a kinematics point of view:

Acceleration is, by definition, is a vector quantity that measures the rate of change of the rate of change in position (add brackets if it helps visualizing the idea). This leads to the following different definitions - which are more like means of calculating it

the second derivative of position with respect to time [tex]a = \ddot x= \frac{d}{dt}({\frac d{dt}} x)[/tex];the first derivative of velocity with respect to time [tex]a = \dot v = \frac d{dt} v[/tex].

From a dinamics point of view

Acceleration is the effect of a force applied to a body, and measures the ratio of the force applied to a body of mass m and the mass itself (which is another formulation of Newton second law):

[tex]a = \frac Fm[/tex]

Acceleration is the rate of change of velocity

 

To define acceleration, We need to know more about motion.

Motion: This can be defined as the change in position of a body from one point to another. When an object accelerates, it undergoes motion.

Definition

Acceleration can be defined as the rate of change of velocity. The S.I unit of acceleration is meter-per-squared seconds. (m/s²)

The formula of acceleration is

a = (v-u)/t................. Equation 1

⇒ Where:

a = accelerationu = initial velocityv = final velocityt = time

Hence, Acceleration is the rate of change of velocity

Learn more about acceleration here: https://brainly.com/question/605631

True or False If the mass of the object increases, then the potential energy of the object decreases.​

Answers

Answer:

The amount of gravitational potential energy an object has depends on its height and mass. The heavier the object and the higher it is above the ground, the more gravitational potential energy it holds. Gravitational potential energy increases as weight and height increases.

Explanation:

Answer:

Explanation:

It depends on where your reference frame for potential energy is chosen.

If a mass is above the reference origin and mass increases, potential energy will increase so the statement is FALSE

If the mass is at the reference origin and the mass increases, the potential energy stays constant at zero so the statement is FALSE

If the mass is below the reference origin and the mass increases, then the potential energy goes from a negative value to an even lower negative value so the statement in this case is TRUE

a heavy jar sits on top of a 3.4 m shelf with a gravitational potential energy of 180 j. What is the mass of the jar?

Answers

Answer:

5.2941176471 kg or 5294.1 grams

Explanation:

g.p.e= mgh

g.p.e/gh=m

180j/10×3.4= m

180/34= m

5.2941 kg= m


Challenge
Marks: 1
How much energy is transferred by a 500 watt heater that is on for 2
minutes?

Answers

Answer:

Explanation:

500 W = 500 J/s

500 J/s(2 min(60 s/min) = 60000 J

Telescopes work by using optics with true or false

Answers

Answer: true

its making me add 20 word so here they are g g  g g g g g gg g t

Answer: its FALSE

Explanation:

Telescopes work by using optics with light is false, just took the quiz.

Why is acceleration of an object moving at a constant velocity always zero?

Answers

Answer:

If an object is moving with a constant velocity, then by definition it has zero acceleration. So there is no net force acting on the object. The total work done on the object is thus 0 (that's not to say that there isn't work done by individual forces on the object, but the sum is 0 ).

Explanation:

In the middle, when the object was changing position at a constant velocity, the acceleration was 0. This is because the object is no longer changing its velocity and is moving at a constant rate.

You are investigating how objects move when they are dropped from different heights. To collect your data, you drop a 1 kg weight from different heights and record the time it takes for the object to hit the ground when dropped from different heights. The data you collect is shown below:

Height dropped (m)

Time to fall (s)

1.0

0.45

2.0

0.63

3.0

0.78

4.0

0.89



Next, you plan to drop a 5 kg weight from the same heights. How will your time values in your new data table for the 5 kg weight compare to the time values in the old data table for the 1 kg weight?

Answers

The time of motion of the 5 kg object will be the same as 1 kg since both objects are dropped from the same height.

The given parameters;

Mass of the first object, m1 = 1 kg

Mass of the second object, m2 = 5 kg

The final velocity of the objects during the downward motion is calculated as follows;

[tex]v_f = v_0 + gt\\\\v_f = 0 + gt\\\\\v_f = gt[/tex]

The time of motion of the object from the given height is calculated as;

[tex]h = v_0 t + \frac{1}{2} gt^2\\\\h = 0 + \frac{1}{2} gt^2\\\\h = \frac{1}{2} gt^2\\\\gt^2 = 2h\\\\t^2 = \frac{2h}{g} \\\\t = \sqrt{\frac{2h}{g} }[/tex]

The time of motion of each object is independent of mass of the object.

Thus, the time of motion of the 5 kg object will be the same as 1 kg since both objects are dropped from the same height.

Learn more about time of motion here: https://brainly.com/question/2364404

A car starting from rest has a constant acceleration of 5 m/s2. How long will it take to reach a speed of 20 m/s

Answers

Answer:

Explanation:

v = u + at

20 = 0 + 5t

t = 20/5

t = 4 s

The equation below can be used to calculate a change in gravitational potential energy. What units must be used for h? Give the full name, not the abbreviation.
e=m x g x h

Answers

Answer:

h = change in vertical position (height)

has units of distance.

Explanation:

The equation below can be used to calculate a change in gravitational potential energy then the units used for the height would be meters.

What is mechanical energy?

The sum of all the energy in motion (total kinetic energy) and all the energy that is stored in the system (total potential energy) is known as mechanical energy.

As given in the problem, the equation below can be used to calculate a change in gravitational potential energy, the units used for the height of the object would be in meters, which is the SI unit of the length

The gravitational potential energy = mass×acceleration ×height

                                                         

Thus, the unit of height used in the gravitational potential energy formula would be meter.

To learn more about mechanical energy from here, refer to the link;

brainly.com/question/12319302

#SPJ2

Find the required angular speed, ω, of an ultracentrifuge for the radial acceleration of a point 1.60 cm from the axis to equal 300000 g (where g is the acceleration due to gravity).
Express your answer numerically in revolutions per minute.

Answers

Answer:

Explanation:

300000(9.8) = ω²(0.0160)

ω = 13555 rad/s

13555 rad/s (60 s/min/ 2π rad/rev) = 129,445 rev/min

Best way to demonstrate that waves transfer energy

Answers

Answer:

Waves can transfer energy over distance without moving matter the entire distance. For example, an ocean wave can travel many kilometers without the water itself moving many kilometers. The water moves up and down—a motion known as a disturbance. It is the disturbance that travels in a wave, transferring energy.

Explanation:

Which of the following waves DO NOT require a medium to travel?

Answers

Answer:

hey man, think you forgot to put the questions

Anyone know? plzz It's a grade.

Answers

Answer:

Gregor Mendal discovered the basic laws of inheritance he concluded that genes come in pairs and are are inherited from each parent. Rosalind Franklin discovered the structure of DNA(Deoxyribonucleic Acid), and RNA(Ribonucleic Acid). She also discovered about the double helix structure of DNA. She works on the composition of the human body and her discoveries were vast. Watson and Clark were one of the greatest genetic discoverers ever. They were the ones who rose modern molecular biology. In short terms, they were the ones concerned with how genes work and there role in DNA Replication.

Explanation:

Tony brought 9 2/3pitchers of juice to a volleyball game, and the players drank3 7/8pitchers of it. How much juice is left?

Answers

Rewrite the amounts as improper fractions:

9 2/3 = 29/3

3 7/8 = 31/8

Rewrite both fractions with a common denominator

29/3 = 232/24

31/8 = 93/24

Now subtract: 232/24 - 93/24 = 139/24

Rewrite as a proper fraction: 5 19/24

Answer 5 19/24

Are these a Chemical or Physical Change??

1. Sodium Bicarbonate breaks down into sodium carbonate and water.
A. Chemical Change
B. Physical Change

2. Mercury is cooled until it is in the solid state.
A. Chemical Change
B. Physical Change

Answers

1. chemical change, as it is the breaking of bonds

2. physical change, as it is a change in temperature

The change of sodium bicarbonate breaking down into sodium carbonate and water is a chemical change. The cooling of mercury until it is in the solid state is physical change. The correct option for 1 is A and for 2 is B.

What is chemical and physical change?

A chemical change occurs as a consequence of a reaction, whereas a physical change occurs when transformation occurs forms but retains its chemical identity.

Chemical changes include burning, cooking, rusting, and rotting. Physical changes include boiling, melting, freezing, and shredding.

A physical change is required to a specimen of matter in which some of the material's properties change but the matter's identity does not.

Physical changes can be classified as either reversible or irreversible. Melting is a reversible physical change because the melted ice cube can be refrozen.

In the first case, sodium bicarbonate is breaking down and forming sodium carbonate and water, this implies a chemical change.

In the second case, mercury is just cooling down, changing its physical shape. So it is physical change.

Thus, the correct option for 1 is A and for 2 is B.

For more details regarding chemical and physical changes, visit:

https://brainly.com/question/11321843

#SPJ2

2. An object is falling under gravity with terminal velocity. What is happening to its speed?
A. It is decreasing to a lower value.
B. It is increasing
C. It is decreasing to zero.
D. It is staying constant.

Answers

Answer:

the speed of the object has become constant.

Explanation:

At terminal velocity, air resistance equals in magnitude the weight of the falling object. Because the two are oppositely directed forces, the total force on the object is zero, and the speed of the object has become constant.

The answer is B because of the acceleration

all pressure topics in physics​

Answers

Absolute, Atmospheric, Differential, and Gauge Pressure

A .223 rifle bullet, traveling at 370.m/s, hits a block of pine wood, and goes in, to a depth of 0.130m. The mass of the bullet is 1.75g (mass = 0.00175kg). Assume a constant slowing force. (A) What is the acceleration that the bullet experiences as it comes to a stop? (B) How much time is required for the bullet to stop? (C) What force, in Newtons, does the wood exert on the bullet?

Answers

Answer:

Explanation:

A)

v² = u² + 2as

a = (v² - u²) / 2s

a = (0² - 370²) / (2(0.130))

a = -526,538 m/s²

B)

t = v/a

t = 370 / 526538

t = 0.0007027... s or 0.7 ms

C)

F = ma

F = 0.00175(526,538) = 921.442307... = 921 N

A 70 kg hunter, standing on frictionless ice, shoots a 42 g bullet horizontally at a speed of 650 m/s . Part A What is the recoil speed of the hunter

Answers

Answer:

Explanation:

momentum is conserved. Initial momentum was zero, so final total momentum must also be zero

0.042(650) + 70v = 0

v = -0.39 m/s

|v| = 0.39 m/s

If you are good at activities that require agility, what are you able to do well?
1.maintain your heart rate in the upper ranges
2.quickly change the direction of your movement
3.hold a difficult position for a long period of time
4.strategize about the best way to win a game

Answers

Answer:

2.quickly change the direction of your movement

Explanation:

A 0.75 kg model car is moving west at a speed of 9.0 m/s when it collides head-on with a 2.00 kg model truck that is traveling east at a speed of 10.0 m/s. After the collision, the 0.75 kg model car is now moving east at 11 m/s. What is the speed and direction of the model truck after the collision?

Answers

Answer:

  2.5 m/s east

Explanation:

Let east be the positive direction for velocity.

The change in momentum of the 0.75 kg model car is ...

  m1·v2 -m1·v1 = (0.75 kg)(11 m/s) -(0.75 kg)(-9 m/s)

  = (0.75 kg)(20 m/s) = 15 kg·m/s

The change in momentum of the 2.0 kg model car is the opposite of this, so the total change in momentum is zero.

  m2·v2 -m2·v1 = (2 kg)(v2 m/s) -(2 kg)(10 m/s) = 2(v2 -10) kg·m/s

The required relation is ...

  15 kg·m/s = -2(v2 -10) kg·m/s

  -7.5 = v2 -10 . . . . divide by -2

  2.5 = v2 . . . . . . . add 10

The velocity of the model truck after the collision is 2.5 m/s east.

The slope of a line on a distant-time graph is
A. distance
B. time
C. speed

Answers

Answer:

c. speed

Explanation:

In a distant-time graph the x value is usually the time and the y value is usually the distance.

If slope is the change in y over the change in x, on a distant time graph the slope would be the change in time over the change in distance

Or time / distance.

Time / distance happens to calculate speed.

Thus, the slope of a line on a distant-time graph is speed.

[tex]\huge\textbf{Hey there!}[/tex]

[tex]\large\textbf{The formula for Slope of a line is: }\mathbf{m = \dfrac{rise}{run}}\large\textbf{ whereas it is}\\\large\textbf{equal to/equivalent to }\mathbf{ \dfrac{y_2 - y_1}{x_2- x_1} \ .}\\\\\large\textbf{Basically, the slope of the line is measured with its }\\\large\textbf{\underline{steepness}. The word steepness simply means a}\\\lage\textbf{very sharp slope.}[/tex]

[tex]\large\textbf{On slope of a line on distant-time graph is basically how }\\\large\textbf{ \boxed{\bf FAST} a particular object is.}[/tex]

[tex]\large\textbf{Now, that we got that information out of the way we}\\\large\textbf{can find out our answer.}[/tex]

[tex]\large\textbf{The formula for distance is: }\mathbf{d= \sqrt{(x_2 - x_1)^2 + (y_2 +y_1)^2}}}[/tex]

[tex]\large\textsf{We cannot say that OPTION A isn't your answer because you}\\\large\textsf{cannot calculate slope of a line on a distant-time graph. You}\\\large\textsf{cannot calculate the speed of the object by using that formula.}\\\large\textsf{So, this eliminates Option A. as your answer.}[/tex]

[tex]\large\textbf{The formula of time is: }\mathbf{time = \dfrac{distance}{speed}}[/tex]

[tex]\large\textsf{Yes, it calculates the distance but it doesn't calculate how fast a(n)}\\\large\textsf{object is going. So this eliminates Option B. as your answer.}[/tex]

[tex]\large\textsf{The formula for speed is: }\mathbf{s = \dfrac{d}{t}}\large\textbf{ whereas s = \underline{speed}, }\\\large\textsf{d = \underline{distance} you have \underline{traveled}, \& t = \underline{time} that has}\\\large\textsf{been \underline{elapsed}.}\\\large\textsf{Option C. could possibly be your answer}[/tex]

[tex]\large\textbf{Option C. seems to be the closes to your result than the}\\\large\textbf{to your answer.}[/tex]

[tex]\large\boxed{\text{Therefore, your answer should be: \boxed{\textbf{Option C. Speed}}}}\huge\checkmark[/tex]

[tex]\huge\textbf{Good luck on your assignment \&}\\\huge\textbf{enjoy your day!}[/tex]

~[tex]\frak{Amphitrite1040:)}[/tex]

Which statement about diffraction is correct?
A. Sound waves bend around the corners of various obstacles.
B. Sound waves can only travel in straight lines.
C. The amplitudes of two waves combine to appear as a wave smaller than the individual waves.
D. The amplitudes of two waves combine to appear as one big wave.

Answers

Answer:

I think A

Explanation:

Which statement about diffraction is correct?

A. Sound waves bend around the corners of various obstacles.

B. Sound waves can only travel in straight lines.

C. The amplitudes of two waves combine to appear as a wave smaller than the individual waves.

D. The amplitudes of two waves combine to appear as one big wave.

. Prior to Remy's trip to Cleveland, his uncle tells him about this amazing barbecue restaurant there and raves about
the food and live music. Remy looks it up once he gets to Cleveland, and he finds that there are a number of
negative reviews about it. Nevertheless, he focuses on the few positive reviews he comes across, convinces himself
they are probably more valid than the negative ones, and decides to go to the restaurant after all. Remy has likely
been influenced by:
the availability heuristic.
confirmation bias.
O the representativeness heuristic.
oming

Answers

whats the restraunt called

Based on the scenario, Remy has likely been influenced by framing effect.

What is framing effect?

In Psychology, framing effect can be defined as a cognitive bias wherein a person's choice from a group of options is primarily influenced by the positive or negative connotations pertaining to the options.

In this scenario, Remy did a research on the barbecue restaurant and finds that there are a number of both negative and positive reviews about it. However, he convinced himself by relying on the positive reviews and decides to go to the restaurant.

In conclusion, we can deduce that Remy has likely been influenced by framing effect.

Read more on framing effect here: https://brainly.com/question/24053333

PLSSS HELP WILL MARK AS BRIANLIEST
The atomic mass is equal to the number of ______.
A.Protons
B.Electrons and neutrons
C.Neutrons and protons
D.neutrons

Answers

The answer is C : Neutrons and Protons

In order to create a charged object, you need to ________.

Answers

In order to create a charged object you need to transfer electrons either away or to the object by induction, conduction, or friction

Induction is without contact(like bringing a charged object to a electroscope charges the leaves at the bottom)
Conduction is with contact(like the previous answer, wore touching transfers the charge from a source to the object)
Friction(rubbing a balloon on wool)

a stone is thrown down off a bridge with a velocity of 22 m/s. what is its velocity after 1.5 seconds has passed?

Answers

Answer:

Velocity of the stone after 1.5 seconds has passed = 37 m/s

Explanation:

Initial velocity (u) = 22 m/s

Time (t) = 1.5 sec

Acceleration due to gravity (g) = 10 m/s²

By using kinematics equation:

v = u + gt

v = 22 + 10 × 1.5

v = 22 + 15

v = 37 m/s

Final velocity (v) = 37 m/s

Other Questions
During chemical reactions, bonds between atoms break and form. What does this mean in terms of subatomic particles? (1 point)O Electrical fields of charged particles interact, bonding those with the same charge.Electrical fields of neutral particles interact, bonding those with opposite charges.O Electrical fields of neutral particles interact, bonding those with the same charge.o Electrical fields of charged particles interact, bonding those with opposite charges Reactions cannot occur without a certain minimum amount of energy. What is this minimum amount of energy called?the activation energythe activated complexthe kinetic energy of reactantsthe potential energy of products evaluate f(x) = 5(x-4) when x=10 What is the first step of the second step to prove that Sn arrow 1+2+3+..+n=n(n+1)/2? Can someone please help? This is difficult. A package of Oreos typically contained 45 cookies. Recently, Nabisco reduced the number to 39 cookies in a package because of inflation! What is the percent of change? Nivel de energia maximo de 20Ca Salena is making bracelets. She has 95 inches of string. Each bracelet uses 4 inches of string. How were the europeans affected by the deseases they brought to the natives? My Japanese class is _______ than his English class.A.funnyB. funnierC. funniestD. the funny Which of the following bestdescribes the Gentleman'sAgreement made between theUnited States and Japan in thebeginning of the 1900s? What does the Ghost ofChristmas Yet to Come showScrooge in their firstexperience?? select the correct product for the problem below. (85)(23)(4) =? -64/15 64/15 16/60 -16-60 64-60 Write the integer from least to greatest. 4, 12, -12, -11 Which sentence would be the best choice for talia to add to the what I learned column On Monday there are 25 pencils in a basket, If 3 pencils are taken out of the basket each day, how many pencils are left in the basket on Friday? Which of the following choice completes the diagram?A. Credit card companiesB. Issuer banksC. BanksD. All of the choices people now call him your holiness, but childhood friends of pope francis knew him as what? What do u chooseeat the red pill be ueat the blue pill be u 2 You barrow 300$ for 5 years at an interest of 4% what is the interest you paid