Answer:
Cl
Explanation:
The element Cl will have the strongest ionization energy from the given choices. Most non-metals have higher ionization energy compared to metals.
Ionization energy is the energy required to remove the most loosely held electron from the gaseous phase of an atom.
As you go from left to right on the periodic table, it increases progressiveFrom top to bottom, the ionization energy reduces significantly. The attractive force between the protons in the nucleus and the electrons plays a very important role. In metals, they have very large atomic radius, the attractive force on the outer electrons is very weak. This is not the case in non-metals18.2 mL of a 0.156 M solution of lead(II) nitrate are added to 26.2 mL of a 0.274 M solution of potassium iodide.
What is the mass of the Pbl2 precipitate formed in the reaction Pb(NO3)2 (aq) + 2 KI (aq) - Pbl2 (s) + 2 KNO3? The molar mass of Pbly is 461.0 g/mol.
Provide your answer in units of grams, with the correct number of significant digits. Enter your answer as a number only; do not include units.
The mass of the Pbl2 : 1308.87
Further explanationGiven
18.2 mL of a 0.156 M Pb(NO3)2
26.2 mL of a 0.274 M KI
Reaction
Pb(NO3)2 (aq) + 2 KI (aq) - Pbl2 (s) + 2 KNO3
Required
the mass of the Pbl2
Solution
mol Pb(NO3)2 = 18.2 x 0.156 = 2.8392 mlmol
mol KI = 26.2 x 0.274 =7.1788 mol
Limiting reactant Pb(NO3)2(smaller ratio of mol : reaction coeffiecient)
mol Pbl2 based on limiting reactant (Pb(NO3)2)
From equation, mol ratio of Pb(NO3)2 : Pbl2 = 1 : 1, so mol Pbl2=mol Pb(NO3)2=2.8392
Mass Pb(NO3)2 :
[tex]\tt mass=mol\times MW\\\\mass=2.8392\times 461\\\\mass=1308.87~grams[/tex]
For the following reaction,use the identity of the alkyl halide and nucleophile to determine which substitution mechanism occurs.Then determine which solvent affords the faster reaction.
A) SN1,H2O
B) SN1,DMF
C) SN2,H2O
D) SN2,DMF
Answer:
a) SN1/H2O
b) SN1/CH3OH
c)SN2/DMF
d)SN2/HMPA
Explanation:
The reactions are shown in the image attached.
Let me restate the basic facts about SN1 and SN2 reaction mechanisms. SN1 reaction occurs by unimolecular mechanism and involves a carbocation, a poor nucleophile and a polar protic solvent.
An SN2 reaction is a bimolecular synchronous reaction that passes through a single transition state. It requires a good nucleophile and a polar aprotic solvent.
For reaction a and b, we observe that the alkyl halide is tertiary hence the reaction occurs by SN1 mechanism in the presence of a polar protic solvent.
Reactions c and d involves primary and secondary alkyl halides respectively and good nucleophiles. The best solvents to be used are polar aprotic solvents and the reaction follows SN2 mechanism.
When hydrogen reacts with calcium metal, what are the oxidation numbers of the calcium and hydrogen in the CaH2 product?
Ca(s)+ H2(g) → CaH2
a. +2 and -1
b. +1 and -2
c. +2 and 2
d. 0 and 0
e. -2 and +1
Answer: e. -2 and +1
Explanation:
Oxidation number or oxidation state : It represent the number of electrons lost or gained by the atoms of an element in a compound.
Oxidation reaction is defined as the reaction in which a substance looses its electrons. The oxidation number of the substance increases.
Reduction reaction is defined as the reaction in which a substance gains electrons. The oxidation number of the substance gets reduced.
[tex]Ca(s)+H_2(g)\rightarrow CaH_2[/tex]
The oxidation number of calcium (Ca) in free state is 0 and in [tex]CaH_2[/tex] , it is -2.
The oxidation number of hydrogen in [tex]H_2[/tex] is zero and oxidation number of hydrogen in [tex]CaH_2[/tex] is +1 as in hydrides hydrogen loses electrons.
The oxidation number of calcium has been +2, and the oxidation number of hydrogen has been -1. Thus, the correct option is A.
The oxidation number can be defined as the number of electrons that have been lost by an atom in a chemical reaction.
The oxidation number can be calculated as the:
The oxidation number of Hydrogen when it combines with the less electronegative element has been -1.
There have been 2 atoms of Hydrogen that lose an electron, thus the total oxidation contribution of hydrogen has been -2.
The oxidation number of hydrogen has been -1.
The oxidation number of Calcium has been:
Ca atom has taken an electron from the hydrogen.
[tex]\rm Ca\;+\;e^-\;\rightarrow\;Ca^-[/tex]
The calcium takes one electron from each atom bonded. Thus the oxidation number of calcium has been +2.
The oxidation number of calcium has been +2, and the oxidation number of hydrogen has been -1. Thus, the correct option is A.
For more information about oxidation numbers, refer to the link:
https://brainly.com/question/15167411
121
P(1)(1 + i)
1 + 11) 121 - 1
M = (1 + )
Answer:
121
Explanation:
add 1+120 to get answer
How would you put this word equation into a balanced chemical equation: Aluminum nitrate reacts with potassium sulfate to produce aluminum sulfate and potassium nitrate.
Answer:
2Al(NO_{3} )_{3} + 3K_{2}SO_{4} ----> Al_{2}(SO_{4})_{3} + 6KNO_{3}
Explanation:
[tex]2Al(NO_{3} )_{3} + 3K_{2}SO_{4} ----> Al_{2}(SO_{4})_{3} + 6KNO_{3}[/tex]
Silver nitride is formed when a silver cation that has a 1+ charge combines with a nitrogen anion that has a 3- charge. Write the formula for the compound silver nitride.
if I am on a bus and I'm relative to A the student sitting next to me B relative to the house the bus goes by?
Which is a type of chemical weathering?
A.
abrasion
B.
condensation
C.
exfoliation
D.
hydration
Answer:
The correct answer is D) hydration
d
Explanation:
the answer is hydration
How does heat differ from temperature?
O Temperature is the measure of heat.
O Temperature and heat are the same thing.
O Temperature measures thermal energy, and heat is the flow of thermal eneroy
O Temperature measures the loss of energy, and heat measures the gain of eneray.
Answer: Temperature measures thermal energy, and heat is the flow of thermal energy
Explanation:
Heat describes the transfer of thermal energy between molecules within a system. Heat measures how energy moves or flows. It is measured in Joules.
Temperature measures the hotmess or coldness of a body or how much thermal energy it contains . Temperature describes the average kinetic energy of molecules within a material or system. It is measured in Celsius (°C), Kelvin(K), or Fahrenheit (°F).
Thus the correct option is Temperature measures thermal energy, and heat is the flow of thermal energy
Answer:
its c
Explanation:
edg 2021
What was a result of the Zhou capital being destroyed by invaders?
A) Leaders of the feudal states declared independence.
B) Loyal relatives supported the king to protect the empire.
C) Feudal rulers began to use nomadic soldiers in their armies.
D) Philosophers gained power by encouraging citizens to rebel.
Answer:
A
Explanation:
Answer:
think it is D
Explanation:
hope this helps
What os the formula for hexaboron tetrabromide
Answer:
B6Br4
Explanation:
Chemical formula gives a representation of the number of atoms that each element in a compound or molecule. In this question which is asking to give the formula of hexaboron tetrabromide, the hexa means 6 while the tetra means four.
Since the number of atoms of each element is written as a prefix before the main element, this means that the chemical formula of hexaboron tetrabromide will be B6Br4.
What happened to the celery if you put in food color water
Answer:
the celery would change colour!
Explanation:
if you start with 362 grams of C3 H8 how many grams of H2O will be produced
Answer:
52 g H2O (to 2 significant figures)
Explanation:
I hope you like my answer:)
Can you mark me as brainliest please
Which elements are diatomic?
1
H
3
Li
6
с
7
N
8
0
9
F
5
B
13
AI
2
He
10
Ne
18
Ar
15
P
16
S
17
CI
11
Na
19
K
4.
Be
12
Mg
20
Ca
38
Sr
31
Ga
33
As
35
Br
36
Kr
34
Se
52
Te
14
Si
32
Ge
50
Sn
82
Pb
114
FI
51
Sb
53
1
37
Rb
55
Cs
54
Xe
E
86
49
In
81
TI
113
Nh
56
Ba
83
Ві
84
Po
85
At
Rn
87
Fr
88
Ra
115
Mc
116
Lv
118
117
Ts
Og
Diatomic elements have to atoms of the element in a molecule.
What are diatomic elements?Diatomic elements are those elements whose atoms combine together to form molecules of the element. The elements that are diatomic in the list are;
HNOFClBrSeTeHence, diatomic elements have to atoms of the element in a molecule.
Learn more about diatomic molecules: https://brainly.com/question/4979095
37. Using the reaction of nitrogen gas and hydrogen gas to make ammonia gas
(NH3), if you have 7 L of nitrogen, and all the hydrogen you need, how many
liters of ammonia gas can you make?
You can make 14 L of Ammonia
Further explanationAvogadro's hypothesis:
In the same T,P and V, the gas contains the same number of molecules
So the ratio of gas volume will be equal to the ratio of gas moles
[tex]\tt \dfrac{V_1}{n_1}=\dfrac{V_2}{n_2}[/tex]
Reaction
N₂+3H₂⇒2NH₃
Volume of Nitrogen-N₂ : V₁=7 L
From the equation above, mol ratio of N₂ : NH₃ =1 : 2, so volume of NH₃ :
[tex]\tt \dfrac{7}{1}=\dfrac{V_2}{2}\\\\V_2=\boxed{\bold{14~L}}[/tex]
what are evidence that a chemical change has occurred
Answer:
Gas Bubbles Appear. Gas bubbles appear after a chemical reaction has occurred and the mixture becomes saturated with gas.
Formation of a Precipitate.
Color Change.
Temperature Change.
Production of Light.
Volume Change.
Change in Smell or Taste.
The graph models the amount remaining, in milligrams, of a radioactive substance as a function of time, in years. Explain the meaning of the point (3100) shown on the graph. Answer in complete sentences.
Answer:
Where is the grahppppp?!!!!
Suppose a student made a different sodium hydroxide solution using 0.401g of solid sodium hydroxide and 200mL of water. The student then standardized this solution using benzoic acid in a similar manner to that depicted in the simulation. From the following additional data recorded by the student: a) Mass of benzoic acid: 0.158g b) Volumer of the benzoic acid solution: 100.0mL c) Volume of sodium hydroxide need to neutralize the solution: 27.84mL Determine the molarity of the sodium hydroxide solution.
Answer:
0.05 M
Explanation:
Mass of benzoic acid= 0.158g
Volume of benzoic acid= 100 mL
Volume of sodium hydroxide = 27.84mL
Molar mass of benzoic acid= 122g/mol
Number of moles of benzoic acid= 0.158g/122g/mol= 1.3 × 10^-3 moles
C= no of moles/volume
C= 1.3 × 10^-3 moles × 1000/100
C= 0.013M
So;
Volume of acid VA = 100mL
Concentration of acid CA= 0.013M
Volume of Base VB = 27.84mL
Concentration of Base CB= ???
Number of moles of acid NA =1
Number of moles of Base NB= 1
From;
CAVA/CBVB= NA/NB
CAVANB= CBVBNA
CB= CAVANB/VBNA
CB= 0.013 × 100 × 1/27.84 × 1
CB= 0.05 M
Suppose a highly positive ion was attracted to a membrane. At what location would that most likely occur? a) the head of a lipid b) the tail of a lipid c) the nonpolar portion of a protein d) the double bond located within a lipid
Answer:
A highly positive ion was attracted to a membrane and their locations is explained in details.
Explanation:
1.
The Head of a lipid is hydrophilic (polar). This cover can be bearing negative or positive charges. This is that charge that creates the head hydrophilic(communicate with water(a polar molecule, including negative and positive unfair charges).
The tail is hydrophobic (non-polar). This part doesn't include any charge that enhances hydrophobic. (Does not combine with water.
Now a positive ion can be brought only to electron-rich stations. We cannot say that this situation is forever the hydrophilic part.
A dual bond is an electron-rich situation. So the ion will be drawn to the dual bond place of a lipid.
2.
A conveyor that needs energy is active transport.
3.
The use of a membrane is to stop the particles and ions from passing crosswise it openly. So through the membrane, in an active carrier, we require input energy to transfer molecules beyond it.
Which of the following factors affect the rate of weathering in an area?
A.
climate
B.
topography
C.
rock composition
D.
all of the above
Answer:
D
Explanation:
pretty sure D
Scientists us ________waves to study the characteristics of Earth Layers_______ cannot travel through liquid, so the ________must be liquid.
Answer:
1)seismic 2) S-waves 3) outer core
Answer:the other comment is right
Explanation:
Name the following compound: S₂O₇
Answer:
disulfur heptoxide
Explanation:
Explain how the ability of dilute sulphuric (vi) acid to conduct an electric current compares with that of concentrated sulphuric (vi) acid
Answer:
Explanation:
Hnsnsnsnsnqnananana
How many moles are present in a 5.8 g sample of copper?
A. 11
B. 0.091
C. 0.91
D. 5.5 x 10^22
please i need this for my finals
Explanation:
Molar mass of Cu = 63.5g/mol
Moles of Cu
= 5.8g / (63.5g/mol) = 0.091mol (B)
The number of moles present in a 5.8 g sample of copper is equal to 0.0913 mol. Therefore, option B is correct.
What is a mole?A mole can be defined as an international scientific unit that is used to determine for given count of particles. The particles are commonly identical entities but they are individually distinct.
A mole of the substance can be used to evaluate a large number of atoms, molecules, or particular particles. The amount of material can be measured as chemical entities of a substance in a sample.
The number of units in 1 mole of a material is equal to 6.023×10²³ which is called Avogadro’s constant.
Given, the mass of the copper = 5.8 g
The mass of one mole of copper = 63.5 g
We can calculate moles as, n = Mass/molar mass
Then, the number of moles of copper = 5.8/63.5 = 0.0913 mol
Therefore, the number of moles of copper is 0.0913 mol.
Learn more about the mole, here:
brainly.com/question/26416088
#SPJ2
What else is produced during the combustion of propane, C3H8?
H2O ,
C3H8,
O2,
or
C3H8O2?
Answer:
H20
Explanation:
Answer:
The answer is H20
Explanation:
What is the reducing agent in the following reaction
5Fe2+(aq) + MnO4-(aq) + 8H+(aq) → 5Fe3+(aq) + Mn2+(aq) + 4H2O(I)
A. MnO4-
B. Fe3+
C. Mn2+
D. Fe2+
E. H+
Answer: [tex]Fe^{2+}[/tex] is the reducing agent
Explanation:
Oxidation reaction : When there is an increase in oxidation state number.
Reduction reaction : when there is a decrease in oxidation state number.
[tex]5Fe^{2+}(aq)+MnO_4^-(aq)+8H^+(aq)\rightarrow 5Fe^{3+}(aq)+Mn^{2+}(aq) +4H_2O(l)[/tex]
Fe has undergone oxidation, as its oxidation state is changing from+2 to +3.
Mn has undergone reduction, as its oxidation state is changing from +7 to +2.
The chemical agent which itself get oxidized and reduce others is called reducing agent. [tex]Fe^{2+}[/tex] is a reducing agent.
The chemical agent which itself get reduced and oxidize others is called oxidizing agent. [tex]MnO_4^-[/tex] is an oxidizing agent.
.
Help me please!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Answer:
Wave 2
Explanation:
Higher frequency means more energy per second, And wave 2 has higher frequesncy
please mark brainliest I’m almost at expert level
Answer:
I believe it is wave 2
Explanation:
As you can see in the graph, wave two happens to be more frequent. There are well, more waves than the first graph. Please forgive me if I am wrong. I tried my best to explain
what is 1.602176*10-¹⁹/ 1.758820*10¹¹C kg-¹
with proper explanation.
or expanded form
Answer:
0.00000000910938;
9.109380 * 10^-9
Explanation:
Given the question :
Given :
1.602176*10-¹⁹/ 1.758820*10¹¹
The numbers are expressed in the form:
A * 10^b ; Where;
A = Coefficient ; 10 = base ; b = exponent
The Coefficients can be divided directly as :
1.602176 / 1.758820 = 0.9109380
Using the division law of indices, the exponents acn be worked out as follows since they have the same base :
10^-19 / 10^-11 = 10^(-19 - (-11)) = 10^(-19+11) = 10^-8
Thus, we have ;
0.9109380 × 10^-8
In standard form:
9.109380 * 10^-9
In Expanded form:
10^-8 = 0.00000001
0.9109380 * 0.00000001 = 0.00000000910938
0.000000009 +
0.0000000001 +
0.00000000000 +
0.000000000009 +
0.0000000000003 +
0.00000000000008
__________________
0.00000000910938
___________________
What is the percentage of the actual yield of the reaction of 2.5 mol of Fe(NO3),
with 3.6 mol of Na2Co3, to form 6.3 mol of NaNO3 according to the reaction :
2Fe(NO3)3 + 3NaC03 - >
Fe2(CO3)3 + 6NaNO3 ?
Answer:
Percent yield = 87.5%
Explanation:
Given data:
Number of moles of Fe(NO₃)₃ = 2.5 mol
Number of moles of Na₂CO₃ = 3.6 mol
Actual yield of NaNO₃ = 6.3 mol
Percent yield of NaNO₃ = ?
Solution:
Chemical equation:
2Fe(NO₃)₃ + 3Na₂CO₃ → Fe₂(CO₃)₃ + 6NaNO₃
now we will compare the moles of both reactant with NaNO₃.
Fe(NO₃)₃ : NaNO₃
2 : 6
2.5 : 6/2×2.5 = 7.5
Na₂CO₃ : NaNO₃
3 : 6
3.6 : 6/3×3.6 = 7.2
Theoretical yield of NaNO₃ is 7.2 mol.
Percent yield:
Percent yield = actual yield / theoretical yield ×100
Percent yield = 6.3 mol / 7.2mol ×100
Percent yield = 87.5%
24. H.SO, has
a) Ionic bond
b) both lonic and covalent bonds
c) ionic covalent and coordinate bonds
d) covalent bond
Answer:
b
Explanation:
Both ionic and covalent bonds when it has dissolved into water it will become ionic compound but when it was in gas situation it was covalent compound.