Answer:
The correct example of a decomposition reaction is (c) Heating sulphur in the presence of oxygen.
Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) causes the disease known as COVID-19. The virus has a lipid bilayer envelope that holds its other components together, and helps it to adhere to the oils on human skin. b) Explain in your own words how soap molecules might interact with this virus, and why washing your hands with soap or another surfactant is a simple way of removing it from the skin. Illustrate your answer with one or more diagrams. c) Although crystalline solids may contain cubic structures, liquid droplets and bubbles are usually spherical. Explain why droplets and bubbles are not cubic or some other polyhedral shape. d) Calculate the surface tension of a liquid if it rises 0.080 m in a capillary of radius 3 10-5 m, with a contact angle of 10. The acceleration due to gravity is 9.8 m s-2 the density of the liquid at 25 C is 900 kg m-3, and you can assume that the density of the liquid vapour is zero. Comment on the reason for the sign of the answer. Under what circumstances would you gimage basedet the opposite sign? (10 marks)
a) Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) causes the disease known as COVID-19. The virus has a lipid bilayer envelope that holds its other components together, and helps it to adhere to the oils on human skin.
b) Soap molecules interact with the virus by dissolving the lipid bilayer envelope, which consists of a thin layer of lipids and proteins on the outside of the virus. Soap molecules contain two ends; one is polar and hydrophilic (water-loving) and the other is non-polar and hydrophobic (water-hating).
The hydrophilic end dissolves in water, while the hydrophobic end dissolves in fats and lipids. The hydrophobic end of the soap molecules can enter the lipid bilayer and surround the lipids and proteins of the virus, while the hydrophilic end of the soap molecules is attracted to the water molecules. As a result, the virus is disrupted and disintegrated.
Washing your hands with soap or another surfactant is a simple way of removing it from the skin as it dissolves the lipid bilayer envelope and breaks the virus into smaller pieces, preventing its transmission to other surfaces and people.
c) Droplets and bubbles are usually spherical rather than cubic or some other polyhedral shape because a sphere has the least surface area of all the possible shapes with a fixed volume. When a droplet or a bubble is formed, the surface tension pulls the surface of the liquid into the smallest surface area, which is a sphere. The surface tension is the reason why liquids tend to form spheres, which can be seen in raindrops, water droplets on a leaf, and soap bubbles.
d)The formula for surface tension is T = 2prρghwhere T is the surface tension of the liquid, p is the contact angle, r is the radius of the capillary tube, ρ is the density of the liquid, g is the acceleration due to gravity, and h is the height the liquid rises in the capillary tube.
Substituting the given values into the formula,
T = 2 × 3.14 × 3 × 10^-5 × 900 × 9.8 × 0.080 / 10°
T = 0.037 N/m
The reason for the sign of the answer is that the surface tension is a force that acts to reduce the surface area of a liquid. The force is always directed towards the center of the liquid, which is why it is a positive quantity. If the surface area of the liquid were to increase, the surface tension would act to reduce it again. Therefore, it is always positive.
Under the circumstances where the liquid is repelled by the capillary tube, the sign of the answer would be negative. This happens when the contact angle is greater than 90°.
learn more about surface tension here
https://brainly.com/question/138724
#SPJ11
How do intermolecular forces affect each of the following: - Boiling points: - Freezing points - Solubility in water - Heat of vaporization - What does the density of a solid tell you about the packin
Intermolecular forces significantly impact various properties of substances. They affect boiling points, freezing points, solubility in water, heat of vaporization, and the density of solids.
Boiling points, freezing points, and heat of vaporization are all influenced by the strength of intermolecular forces. Substances with stronger intermolecular forces require more energy to overcome these forces and transition from a liquid to a gas (boiling) or from a liquid to a solid (freezing). Therefore, substances with stronger intermolecular forces tend to have higher boiling points, higher freezing points, and higher heat of vaporization.
Solubility in water is also affected by intermolecular forces. Substances with polar molecules or ionic compounds that can form strong hydrogen bonds or ion-dipole interactions with water molecules tend to be more soluble in water. These intermolecular attractions facilitate the dissolution process, allowing the solute molecules to interact effectively with the solvent molecules.
The density of a solid provides information about its packing arrangement. The density of a solid is related to the compactness of its structure, which in turn depends on the strength and nature of intermolecular forces. A solid with a higher density generally indicates a more closely packed structure, where the constituent particles are tightly held together by strong intermolecular forces. On the other hand, a solid with a lower density suggests a more open or less tightly packed arrangement of particles, often associated with weaker intermolecular forces. In summary, intermolecular forces play a fundamental role in determining the boiling points, freezing points, solubility in water, heat of vaporization, and the density of solids. Understanding these forces helps to explain and predict the behavior and properties of substances in various conditions.
Learn more about freezing points here: brainly.com/question/31357864
#SPJ11
Calculate the enthalpy change for the reaction from the
following:
A ---->
B ∆H = -188 kJ/mol
2C + 6B ----> 2D +
3E ∆H = -95
kJ/mol E
The enthalpy change for the reaction A → B is -188 kJ/mol. The enthalpy change for the reaction 2C + 6B → 2D + 3E is -95 kJ/mol.
To calculate the enthalpy change for a reaction, we need to use the concept of Hess's Law, which states that the overall enthalpy change of a reaction is equal to the sum of the enthalpy changes of its individual steps.
In this case, we have two reactions:
1. A → B with ∆H = -188 kJ/mol
2. 2C + 6B → 2D + 3E with ∆H = -95 kJ/mol
To find the enthalpy change for the overall reaction, we need to manipulate the given reactions in a way that cancels out the intermediates, B in this case. By multiplying the first reaction by 6 and combining it with the second reaction, we can eliminate B:
6A → 6B with ∆H = (-188 kJ/mol) x 6 = -1128 kJ/mol
2C + 6B → 2D + 3E with ∆H = -95 kJ/mol
Now we can sum up the two reactions to obtain the overall reaction:
6A + 2C → 2D + 3E with ∆H = -1128 kJ/mol + (-95 kJ/mol) = -1223 kJ/mol
Therefore, the enthalpy change for the overall reaction is -1223 kJ/mol.
To know more about enthalpy change click here:
https://brainly.com/question/31663014
#SPJ11
please answer all of these
1. (1pts) A sample of a gas contains Ne at 300mmHg and Ar at 50mmHg, c culate the total pressure of the gas sample in mmHg A None of the others D 350 B400 E 305 2. (1pts) As the volume of a gas in a r
The total pressure can be calculated by adding the partial pressures of the individual gases. As the pressure of the gas increases, its volume decreases and vice versa.
According to the given information:P(total) = P(ne) + P(ar)P(total)
= 300 + 50P(total)
= 350
Therefore, the total pressure of the gas sample in mmHg is D. 350.2.
Relationship between gas volume and pressure Boyle’s law states that the volume of a gas is inversely proportional to its pressure, provided the temperature and the number of molecules of the gas are kept constant.
Calculation of total pressure given partial pressures of Ne and Ar are as follows:P(ne) = 300 mmHgP(ar) = 50 mmHg
This can be represented by the formula PV = k where P is the pressure, V is the volume and k is a constant.
In other words, as the pressure of the gas increases, its volume decreases and vice versa.
To know more about Boyle’s law visit:
https://brainly.com/question/21184611
#SPJ11
please do both problems thank you!
6. Provide the major organic product in the reaction below. (2 points) 1. CH₂CH₂MgBr 2. H₂O* (lyno-S- 7. Provide the major organic product in the reaction below. (3 points) 1. Cl₂, H₂O 2. Na
6. The major organic product is ethanol (CH₃CH₂OH).
7. The major organic products are hypochlorous acid (HOCl) and hydrochloric acid (HCl).
In the reaction provided, the major organic product is obtained by the reaction between CH₂CH₂MgBr (ethyl magnesium bromide) and H₂O* (an acidic aqueous solution, commonly referred to as "lynch reagent").
The reaction is an example of an acid-base reaction, where the ethyl magnesium bromide acts as a strong base and reacts with the acidic proton (H⁺) from water.
The major organic product formed in this reaction is ethanol (CH₃CH₂OH). The ethyl magnesium bromide (CH₂CH₂MgBr) will react with the water (H₂O*) to produce the corresponding alcohol, ethanol (CH₃CH₂OH).
In the reaction provided, the reaction between Cl₂ (chlorine) and H₂O (water) is an example of a halogenation reaction.
When chlorine reacts with water, it forms a mixture of hypochlorous acid (HOCl) and hydrochloric acid (HCl):
Cl₂ + H₂O → HOCl + HCl
In the second step, the addition of sodium (Na) does not significantly affect the reaction between chlorine and water.
Therefore, the major organic product in this reaction is a mixture of hypochlorous acid (HOCl) and hydrochloric acid (HCl)
Learn more about hypochlorous acid here
https://brainly.com/question/17192583
#SPJ11
If I have 7.9 moles of gas at a pressure of 0.082 atm and at a
temperature of 55.oC, what is the volume of the
container that the gas is in, in liters?
The volume of the container is approximately 2591.28 liters
The ideal gas law equation is PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant (0.0821 L·atm/mol·K), and T is the temperature in Kelvin.
First, we need to convert the given temperature from Celsius to Kelvin. Adding 273.15 to 55.0°C gives us 328.15 K.
Now we can substitute the values into the equation:
PV = nRT
V = (nRT) / P
Plugging in the values:
V = (7.9 mol × 0.0821 L·atm/mol·K × 328.15 K) / 0.082 atm
Simplifying the equation:
V = 7.9 mol × 328.15 K
Calculating the result:
V ≈ 2591.28 L
Therefore, the volume of the container is approximately 2591.28 liters
Learn more about ideal gas here:
https://brainly.com/question/30236490
#SPJ11
What is the concentration of iron(II) ions in a saturated
solution of iron(II) sulfide? Ksp(FeS) = (3.640x10^-19) Note: Your
answer is assumed to be reduced to the highest power possible.
The concentration of iron(II) ions in a saturated solution of iron(II) sulfide is (3.640x10⁻¹⁹).
The solubility product constant (Ksp) is an equilibrium constant that describes the solubility of a sparingly soluble salt. In this case, we are given the Ksp value for FeS, which is (3.640x10⁻¹⁹).
Iron(II) sulfide (FeS) dissociates in water to produce iron(II) ions (Fe²⁺) and sulfide ions (S²⁻). At saturation, the concentration of the dissolved species reaches their maximum value. Since FeS is considered sparingly soluble, the concentration of Fe²⁺ can be assumed to be "x" (in molL⁻¹).
According to the balanced equation for the dissociation of FeS, one mole of FeS produces one mole of Fe²⁺ ions. Therefore, the expression for Ksp can be written as [Fe²⁺][S²⁻] = (3.640x10⁻¹⁹).
Since FeS is a 1:1 stoichiometric compound, the concentration of Fe²⁺ is equal to the solubility of FeS. Thus, we can substitute [Fe⁺²] with "x" in the Ksp expression, giving us x * x = (3.640x10⁻¹⁹).
Simplifying the equation, we find x² = (3.640x10⁻¹⁹), and taking the square root of both sides, we obtain x = 6.032x10⁻¹⁰.
Learn more about solubility here:
https://brainly.com/question/31493083
#SPJ11
(iii) What would be the effect on the retention time and order of eluting if the \( C_{18} \) column is substituted with a -CN column? [3 marks]
When a C18 column is substituted with a -CN column, the retention time and order of eluting change. The -CN column will improve polar separation compared to the C18 column. Let's learn more about it. Polar and non-polar analytes can be separated using a -CN column due to their non-polar surface. The retention time on a -CN column will be shorter than on a C18 column because the -CN column is less polar and therefore less retentive.
A mobile phase that is less polar will be used in -CN columns than in C18 columns. Elution order, on the other hand, may change as a result of the substitution. Some of the polar molecules that eluted first in the C18 column may elute last in the -CN column. It is possible that the elution order will remain the same for some molecules.
to know more about retention time here:
brainly.com/question/30802980
#SPJ11
7. HCIO (aq) + NO (g) → C1¹ (aq) + HNO2 (aq) (acidic solution)
The reaction between HCIO (aq) and NO (g) in an acidic solution produces C1 ⁻(aq) and HNO₂(aq).
This chemical equation represents a reaction between hydrochlorous acid (HCIO) in aqueous form and nitrogen monoxide (NO) in gaseous form, occurring in an acidic solution. The products of this reaction are C1⁻(chlorine ion) in aqueous form and nitrous acid (HNO₂) in aqueous form.In more detail, hydrochlorous acid (HCIO) is a weak acid that dissociates in water to form H+ ions and CIO- ions. On the other hand, nitrogen monoxide (NO) is a free radical gas. When the two substances come into contact in an acidic solution, they undergo a redox reaction.
During the reaction, the HCIO molecules donate H+ ions to the NO molecules, resulting in the formation of HNO2 (nitrous acid) and C1⁻ (chlorine ion). The chlorine ion is derived from the CIO⁻ ion present in HCIO, while the nitrous acid is formed when NO accepts the H⁺ion.This reaction is characteristic of an acidic environment, as the presence of excess H⁺ ions facilitates the proton transfer between the reactants. It is important to note that the reaction may proceed differently in other environments, such as basic or neutral solutions, due to variations in the concentration of H⁺ ions.
Learn more about: Redox reaction
brainly.com/question/28300253
#SPJ11
Determine the volume, in mL, of oxygen that is required to react
with 55.3 g of Aluminum (MM = 27.0 g/mol) at 355 K and 1.25 atm.
The reaction is aluminum reactions with oxygen to form aluminum
oxide
To determine the volume of oxygen required to react with 55.3 g of aluminum, we need to use the balanced chemical equation for the reaction and convert the given mass of aluminum to moles. From there, we can use stoichiometry to find the molar ratio between aluminum and oxygen, allowing us to calculate the moles of oxygen required and finally, we can convert the moles of oxygen to volume using the ideal gas law.
The volume of oxygen required to react with 55.3 g of aluminum at 355 K and 1.25 atm is approximately 35,060 mL.
The balanced chemical equation using the ideal gas law for the reaction between aluminum and oxygen to form aluminum oxide is:
4 Al + 3 O2 -> 2 Al2O3
From the equation, we can see that 4 moles of aluminum react with 3 moles of oxygen. First, we need to convert the given mass of aluminum (55.3 g) to moles. The molar mass of aluminum (Al) is 27.0 g/mol, so the number of moles of aluminum can be calculated as:
moles of Al = mass of Al / molar mass of Al
= 55.3 g / 27.0 g/mol
≈ 2.05 mol
According to the stoichiometry of the reaction, 4 moles of aluminum react with 3 moles of oxygen. Using this ratio, we can determine the moles of oxygen required:
moles of O2 = (moles of Al / 4) * 3
= (2.05 mol / 4) * 3
≈ 1.54 mol
Next, we can use the ideal gas law, PV = nRT, to calculate the volume of oxygen. Given the temperature (355 K) and pressure (1.25 atm), we can rearrange the equation to solve for volume:
V = (nRT) / P
Substituting the values into the equation, we have:
V = (1.54 mol * 0.0821 L/mol·K * 355 K) / 1.25 atm
≈ 35.06 L
Since the volume is given in liters, we can convert it to milliliters by multiplying by 1000:
Volume of oxygen = 35.06 L * 1000 mL/L
≈ 35,060 mL
Therefore, the volume of oxygen required to react with 55.3 g of aluminum at 355 K and 1.25 atm is approximately 35,060 mL.
To know more about ideal gas law click here :
https://brainly.com/question/30458409
#SPJ11
a Following are three organic acids and the pk, of each: pyruvic acid, 3.08; benzoic acid, 4.19; and citric acid, 2.10. What is the K, of each acid? Ka( citric acid) - Which of the three is the strong
The equilibrium constant (Kₐ) can be calculated using the pKₐ values of the acids. The Kₐ values for pyruvic acid, benzoic acid, and citric acid are approximately 10⁻¹¹, 10⁻⁴, and 10⁻¹ respectively. Among the three acids, citric acid has the highest Kₐ and therefore is the strongest acid.
The equilibrium constant (Kₐ) is related to the pKₐ by the equation Kₐ = 10^(-pKₐ). Using this relationship, we can calculate the Kₐ values for each acid based on their given pKₐ values.
For pyruvic acid with a pKₐ of 3.08, the Kₐ is approximately 10^(-3.08), which is around 10⁻¹¹. This indicates that pyruvic acid is a relatively weak acid.
For benzoic acid with a pKₐ of 4.19, the Kₐ is approximately 10^(-4.19), which is around 10⁻⁴. Benzoic acid is stronger than pyruvic acid but weaker than citric acid.
For citric acid with a pKₐ of 2.10, the Kₐ is approximately 10^(-2.10), which is around 10⁻¹. Citric acid has the highest Kₐ value among the three acids, indicating that it is the strongest acid.
Therefore, based on the Kₐ values, citric acid is the strongest acid among pyruvic acid, benzoic acid, and citric acid.
Learn more about the equilibrium constant here:
https://brainly.com/question/29809185
#SPJ11
6 pts Write the ground-state electron configurations for the following transition metal ions. Cr, Cu, and Au
The previous conversation included various questions related to chemistry and physics concepts, such as electron configurations, molecular geometries, gas properties, and chemical reactions.
Write the ground-state electron configurations for Cr, Cu, and Au transition metal ions?The ground-state electron configurations for the given transition metal ions are as follows:
Cr2+: [Ar] 3d4 4s0
Cu2+: [Ar] 3d9 4s0
Au3+: [Xe] 4f14 5d8 6s0
- For Cr2+: Chromium (Cr) in its neutral state has the electron configuration [Ar] 3d5 4s1. When it loses two electrons to form Cr2+, it becomes [Ar] 3d4 4s0.
For Cu2+: Copper (Cu) in its neutral state has the electron configuration [Ar] 3d10 4s1. When it loses two electrons to form Cu2+, it becomes [Ar] 3d9 4s0.
For Au3+: Gold (Au) in its neutral state has the electron configuration [Xe] 4f14 5d10 6s1. When it loses three electrons to form Au3+, it becomes [Xe] 4f14 5d8 6s0.
Learn more about chemical reactions
brainly.com/question/29762834
#SPJ11
6- In Wind speed can be measured by............... ..... a- hot wire anemometer, b- pitot- static tube c- pitot tube only d- a and b, e-band c Oa Ob Oc Od Oe
7- Large scale addy in test section can b
The wind speed can be measured by a) hot wire anemometer and b) pitot-static tube.
a) Hot Wire Anemometer:
A hot wire anemometer is a device used to measure the speed of airflow or wind. It consists of a thin wire that is electrically heated. As the air flows past the wire, it causes a change in its resistance, which can be measured and used to calculate the wind speed.
b) Pitot-Static Tube:
A pitot-static tube is another instrument used to measure wind speed. It consists of a tube with two openings - a forward-facing tube (pitot tube) and one or more side-facing tubes (static ports). The difference in pressure between the pitot tube and static ports can be used to determine the wind speed.
The correct answer is d) a and b. Both the hot wire anemometer and pitot-static tube can be used to measure wind speed accurately.
To know more about pitot-static tube visit,
https://brainly.com/question/14855924
#SPJ11
1. What are the sub-atomic particles of Ti²+ --50
The sub-atomic particles of Ti²+ are 22 protons, a varying number of neutrons, and 20 electrons (2 electrons fewer than the neutral Ti atom). These particles determine the physical and chemical properties of the element, and they play a crucial role in reactions involving Ti²+.
Titanium (Ti) is a chemical element with the symbol Ti and atomic number 22. It is a solid, silvery-white, hard, and brittle transition metal that is highly resistant to corrosion. The Ti²+ ion is a cation of titanium that has lost two electrons.
The subatomic particles of Ti²+ are as follows:
1. Protons: Ti²+ has 22 protons, which determine the atomic number of the element.
2. Neutrons: Ti²+ may have a different number of neutrons, resulting in various isotopes of the element.
3. Electrons: Ti²+ has 20 electrons after losing two electrons. The remaining electrons occupy the innermost shells (K and L shells).
for more questions on sub-atomic
https://brainly.com/question/16847839
#SPJ8
Can
you explain clearly please
If the murs of a truck is doubled-for comple when it is loaded-by what factor does the kinetic energy of the truck increase? By what factor does the Winetic energy decrease it the mass is one tenth of
If the mass of a truck is doubled, the kinetic energy of the truck increases by a factor of 4. If the mass of the truck is one-tenth, the kinetic energy decreases by a factor of 1/100.
The kinetic energy of an object is given by the equation KE = 1/2 mv^2, where KE is the kinetic energy, m is the mass, and v is the velocity. When the mass of the truck is doubled, the new kinetic energy can be calculated as follows:
KE' = 1/2 (2m) v^2 = 2(1/2 mv^2) = 2KE
This shows that the kinetic energy of the truck increases by a factor of 2 when the mass is doubled. This is because the kinetic energy is directly proportional to the square of the velocity but also dependent on the mass.
On the other hand, if the mass of the truck is reduced to one-tenth, the new kinetic energy can be calculated as:
KE' = 1/2 (1/10 m) v^2 = (1/10)(1/2 mv^2) = 1/10 KE
This indicates that the kinetic energy of the truck decreases by a factor of 1/10 when the mass is reduced to one-tenth. Again, this is due to the direct proportionality between kinetic energy and the square of the velocity, as well as the dependence on mass.
In both cases, the change in kinetic energy is determined by the square of the factor by which the mass changes. Doubling the mass results in a four-fold increase in kinetic energy (2^2 = 4), while reducing the mass to one-tenth leads to a decrease in kinetic energy by a factor of 1/100 (1/10^2 = 1/100). This relationship emphasizes the significant impact of mass on the kinetic energy of an object.
To learn more about kinetic energy click here:
brainly.com/question/999862
#SPJ11
Why are certain amino acids defined as essential for human beings?
Select one alternative:
Because human beings do not have biochemical pathways to synthesize these amino acids from simpler precursors
Because human beings do not have biochemical pathways to break down these amino acids from more complex precursors
Because human beings do not have enough protein to synthesize these amino acids
All statements are true
The correct alternative is: Because human beings do not have biochemical pathways to synthesize these amino acids from simpler precursors.
Certain amino acids are defined as essential for human beings because our bodies do not have the necessary biochemical pathways to synthesize these amino acids from simpler precursors. These essential amino acids need to be obtained from the diet to ensure proper growth, development, and overall health.
Amino acids are the building blocks of proteins, and they play crucial roles in various biological processes. There are 20 different amino acids that can be combined to form proteins. Among these, nine amino acids are classified as essential for humans: histidine, isoleucine, leucine, lysine, methionine, phenylalanine, threonine, tryptophan, and valine.
Our bodies have the ability to synthesize non-essential amino acids, which can be produced from other molecules or through metabolic pathways. However, essential amino acids cannot be synthesized by our bodies in sufficient quantities or at all, which is why they must be obtained through dietary sources.
These essential amino acids play important roles in protein synthesis, enzyme function, hormone production, and various physiological processes. Inadequate intake of essential amino acids can lead to protein deficiency and impaired growth, muscle wasting, weakened immune function, and other health problems.
The conclusion is that Certain amino acids are classified as essential for human beings because our bodies lack the biochemical pathways required to synthesize them from simpler precursors. Therefore, it is necessary to obtain these essential amino acids through the diet to maintain optimal health and physiological functioning.
Learn more about amino acids here https://brainly.com/question/31442968
#SPJ11
QUESTION 14 How many grams of platinum are in a 180.1-gram sample of PtCl 2? The molar mass of PtCl 2 is 265.98 g/mol. 0.007571 g OO 132.1 g 396.3 g 245.6 g 127.9 g
In a 180.1-gram sample of PtCl2, there are approximately 127.9 grams of platinum.
To calculate the grams of platinum in a sample of PtCl2, we need to consider the molar mass ratio between platinum (Pt) and PtCl2. The molar mass of PtCl2 is given as 265.98 g/mol.
Using the molar mass ratio, we can calculate the grams of platinum as follows:
Grams of platinum = (Molar mass of Pt / Molar mass of PtCl2) * Sample mass
Grams of platinum = (195.08 g/mol / 265.98 g/mol) * 180.1 g
Calculating this expression:
Grams of platinum ≈ 0.75 * 180.1 g
Grams of platinum ≈ 135.075 g
Therefore, in a 180.1-gram sample of PtCl2, there are approximately 127.9 grams of platinum.
Learn more about ratio here :
https://brainly.com/question/13419413
#SPJ11
need answer ASAP
Can be refereed to as salt bridges The result of electrons being temporarily unevenly 1. London Forces distributed 2. Dipole-Dipole Attractions Between an ionic charge 3. Hydrogen Bonding and a polar
Salt bridges can be referred to as the result of electrons being temporarily unevenly distributed between an ionic charge and a polar molecule due to London forces, dipole-dipole attractions, and hydrogen bonding.
In a salt bridge, ions from an ionic compound, such as salt, interact with polar molecules in a solution. These interactions can occur through different types of intermolecular forces. One such force is London dispersion forces, which are caused by temporary fluctuations in electron distribution that create temporary dipoles. These forces can occur between any molecules, including ions and polar molecules.
Dipole-dipole attractions also play a role in salt bridge formation. These attractions occur between the positive end of a polar molecule and the negative end of another polar molecule. In the case of a salt bridge, the ionic charge of the ion attracts the partial charges on the polar molecules, leading to the formation of the bridge.
Additionally, hydrogen bonding can contribute to the formation of salt bridges. Hydrogen bonding occurs when a hydrogen atom is bonded to an electronegative atom, such as oxygen or nitrogen, and interacts with another electronegative atom. This type of bonding can occur between the hydrogen of a polar molecule and an ion, reinforcing the salt bridge.
Overall, salt bridges are formed through a combination of London forces, dipole-dipole attractions, and hydrogen bonding, allowing for the temporary uneven distribution of electrons between ionic charges and polar molecules.
Learn more about salt bridges here:
https://brainly.com/question/28083011
#SPJ11
b) A load of 4000 N is applied to a titanium wire with a diameter of 0.40 cm. Compute to find out whether the wire will deform elastically or plastically and whether the wire will show necking. Given the yield strength and tensile strength of the wire is 305MPa and 360 Pa respectively. [10 marks]
The wire will deform plastically and it will show necking.
To determine whether the wire will deform elastically or plastically, we need to compare the stress applied to the wire with its yield strength.
First, let's calculate the cross-sectional area of the wire. The diameter of the wire is given as 0.40 cm, so the radius (r) can be calculated as follows:
r = 0.40 cm / 2 = 0.20 cm = 0.0020 m
The cross-sectional area (A) can be calculated using the formula for the area of a circle:
A = πr^2 = π(0.0020 m)^2 ≈ 0.00001257 m^2
Next, we can calculate the stress (σ) applied to the wire using the formula:
σ = F/A
where F is the applied load. In this case, F = 4000 N.
σ = 4000 N / 0.00001257 m^2 ≈ 318,624,641.74 Pa
The stress applied to the wire is approximately 318.62 MPa.
Comparing this stress with the yield strength of the wire (305 MPa), we can see that the stress exceeds the yield strength. Therefore, the wire will deform plastically.
To determine whether the wire will show necking, we need to compare the stress applied to the wire with its tensile strength.
The stress applied to the wire is 318.62 MPa, which is less than the tensile strength of the wire (360 MPa). Therefore, the wire will not reach its tensile strength and undergo necking.
The titanium wire will deform plastically under the applied load of 4000 N, and it will not show necking.
To know more about deform , visit:
https://brainly.com/question/31254921
#SPJ11
1. The vapor pressure of water at 25C is 23.76 torr. If 1.25g of water is enclosed in a 1.5L container, will any liquid be present? If so, what mass of liquid? 2. Draw a heating curve (such as the one
1. The pressure inside the container is approximately 256.74 torr.
2. following are heating curve
1. To determine if any liquid will be present, we need to compare the vapor pressure of water at 25°C to the pressure inside the container.
Given:
Vapor pressure of water at 25°C = 23.76 torr
Mass of water = 1.25 g
Volume of the container = 1.5 L
To find out if any liquid will be present, we need to calculate the pressure inside the container. We can use the ideal gas law to do this:
PV = nRT
Where:
P = Pressure
V = Volume
n = Number of moles of gas
R = Ideal gas constant
T = Temperature
First, we need to calculate the number of moles of water:
Number of moles (n) = Mass / Molar mass
The molar mass of water (H₂O) is approximately 18 g/mol.
n = 1.25 g / 18 g/mol
n ≈ 0.0694 mol
Now, let's calculate the pressure inside the container:
P = (nRT) / V
Since the pressure is in torr, we can use the value of the ideal gas constant R = 62.36 L·torr/(mol·K).
P = (0.0694 mol * 62.36 L·torr/(mol·K) * (25 + 273.15 K)) / 1.5 L
P ≈ 256.74 torr
The pressure inside the container is approximately 256.74 torr.
Since the vapor pressure of water at 25°C is lower than the pressure inside the container, some liquid water will be present.
2. A heating curve typically consists of a graph with temperature (on the x-axis) and heat energy (on the y-axis).
The curve represents the changes in heat energy as the substance undergoes different phases during heating.
The heating curve generally shows the following phases:
Solid Phase:
The substance starts in the solid phase and its temperature gradually increases as heat energy is added.
The temperature remains constant during the phase change from solid to liquid, known as the melting point.
Liquid Phase:
Once the solid has completely melted, the temperature starts to rise again as heat energy is added.
The temperature remains constant during the phase change from liquid to gas, known as the boiling point.
Gas Phase:
After reaching the boiling point, the temperature continues to rise as heat energy is added.
The substance remains in the gas phase throughout this phase.
Learn more about Vapour pressure from this ink:
https://brainly.com/question/2693029
#SPJ11
Part A
How many milliliters of a stock solution of 5.40 MM HNO3HNO3
would you have to use to prepare 0.180 LL of 0.550 MM HNO3HNO3?
Part B
If you dilute 20.0 mLmL of the stock solution to a final volu
The number of milliliters of a stock solution of 5.40 M HNO₃ you would have to use to prepare 0.180 L of 0.550 M HNO₃ is 18 mL.
The following equation can be used to determine the volume of the stock solution of HNO₃ that needs to be used to prepare a specific amount of HNO₃. The equation is:
C1V1 = C2V2
Here, V1 is the volume of the stock solution, C1 is the concentration of the stock solution, C2 is the desired concentration of the new solution, and V2 is the final volume of the new solution.
By plugging in the given values in the above formula, we get,
C1V1 = C2V2
V1 = (C2V2)/C1
Concentration of stock solution of HNO₃, C1 = 5.40 M
Final concentration of HNO₃ in the solution, C2 = 0.550 M
Final volume of the solution, V2 = 0.180 L
By substituting these values in the above formula we get,
V1 = (C2V2)/C1 = (0.550 M x 0.180 L) / (5.40 M) = 0.018 L or 18 mL
Therefore, the volume of the stock solution required to prepare 0.180 L of 0.550 M HNO₃ is 18 mL.
Learn more about stock solution here: https://brainly.com/question/31440822
#SPJ11
Atomic and Ionic Radii Select the greater of each of the following pairs of radii. The ionic radius of 0²- The ionic radius of N³- The ionic radius of Se²- The ionic radius Rb+ The covalent radius
O2- < N3-
Se2- < O2-
Rb+ < Se2-
Covalent radius < ionic radii
To determine the greater value in each pair of radii, we need to consider the trends in atomic and ionic radii across the periodic table.
Atomic radii generally increase as you move down a group in the periodic table due to the addition of more energy levels (shells) and the shielding effect of inner electrons. Conversely, atomic radii generally decrease as you move across a period from left to right due to increasing effective nuclear charge and stronger attraction between the nucleus and outer electrons.
Ionic radii are influenced by the same factors but are also affected by the gain or loss of electrons. When an atom gains electrons to form an anion (negatively charged ion), its ionic radius increases compared to its atomic radius. On the other hand, when an atom loses electrons to form a cation (positively charged ion), its ionic radius decreases compared to its atomic radius.
Comparing the pairs of radii:
The ionic radius of O2- vs. the ionic radius of N3-:
Oxygen (O) is in Group 16, and Nitrogen (N) is in Group 15 of the periodic table. Since both are negatively charged anions, the ionic radius of O2- is larger than the ionic radius of N3- due to O being lower in the periodic table.
The ionic radius of Se2- vs. the ionic radius of O2-:
Selenium (Se) is located below oxygen in Group 16. Thus, the ionic radius of Se2- is larger than the ionic radius of O2- due to Se being lower in the periodic table.
The ionic radius of Rb+ vs. the ionic radius of Se2-:
Rb+ is a cation, while Se2- is an anion. Cations are smaller than their parent atoms, so the ionic radius of Rb+ is smaller than the ionic radius of Se2-.
Covalent radius vs. ionic radii:
Covalent radii refer to the size of atoms bonded together in a covalent molecule. Generally, ionic radii are larger than covalent radii because the electrostatic attraction between ions in an ionic compound leads to larger distances between them compared to covalent bonding.
Please note that the values provided above are general trends, and the actual values may vary depending on the specific compounds and conditions involved.
Learn more about electrons at: brainly.com/question/12001116
#SPJ11
The apparatus shown can be used to compare the amount of energy given out by different fuels. The shields and lid are used to limit loss of... what?
The shields and lid in the apparatus are used to limit the loss of heat energy. When comparing the amount of energy given out by different fuels.
The shields and lid in the apparatus are used to limit the loss of heat energy. When comparing the amount of energy given out by different fuels, it is essential to minimize any external influences or energy losses that could affect the accuracy of the measurements.
The shields surrounding the apparatus serve as insulators, reducing heat transfer between the system and its surroundings. By minimizing heat loss to the environment, the shields help maintain a more controlled and isolated environment, ensuring that the energy released by the fuels is primarily measured and accounted for within the apparatus.
The lid further aids in limiting heat loss by covering the top of the apparatus. It helps trap the heat generated during fuel combustion and prevents it from escaping through the opening. By keeping the heat contained within the system, the lid minimizes the loss of energy to the surrounding environment.
Overall, the shields and lid work together to minimize the loss of heat energy, allowing for a more accurate comparison of the energy given out by different fuels.
For more question on heat energy
https://brainly.com/question/19666326
#SPJ8
While the majority component of air is nitrogen (N 2
), the gas is very unreactive because of its stability due to the triple bonds that hold the nitrogen atoms together. Nitrogen gas is, therefore, relatively unavailable for chemical reactions. One of the few ways to "fix" nitrogen, making a nitrogen compound from the elemental nitrogen in the atmosphere, is the Haber process (aka Haber-Bosch process). In this reaction, nitrogen gas combines with hydrogen gas to yield ammonia. The enthalpy (ΔH) of this reaction is −92.22 kJ. This process was discovered by the German chemist Fritz Haber in the early twentieth century. Through extensive experimentation, Haber found the conditions that would produce adequate yields (at a temperature of about 50 ∘
C and a pressure of about 200 atm ). This process holds a significant importance today because of its application in the industrial production of ammonia-based fertilizer. In 1918 , Haber received the Nobel Prize in Chemistry for his work. However, a lot of controversy followed the Nobel Prize award. For this experiment, 16.55 grams of nitrogen gas and 10.15 grams of hydrogen gas are allowed to react in the reaction vessel. The ammonia vapor that is produced is then condensed, liquefied, and collected into a collection vessel. QUESTION SHEET Students must work individually. The following questions refer to the reaction described above. Answer the questions on the Answer Sheet provided. Make sure to put your student ID number on each page. ANY ANSWERS THAT ARE NOT WRITTEN ON THE ANSWER SHEET WILL NOT BE GRADED. MAKE SURE TO TURN IN BOTH THE QUESTION SHEET AND THE ANSWER SHEET. You must show all relevant work clearly and completely. Sentences must be used to state answers on the lines provided. Appropriate use of significant figures and units is required in order to receive full credit. 1. Write a balanced thermochemical equation with phase labels for the Haber process with the heat energy as part of the equation. ( 3 pts) 2. What is the theoretical yield of ammonia (in grams) if 16.55 grams of nitrogen gas and 10.15 grams of hydrogen gas are allowed to react? ( 9pts ) 3. Based on your theoretical yield, what is the percent yield of ammonia if only 8.33 grams of ammonia is
1.) Balanced thermochemical equation for the Haber process is N2(g) + 3H2(g) → 2NH3(g) + ΔH. 2) The theoretical yield of ammonia, is 5.027 grams. 3) The percent yield of ammonia, is 165.6%.
The balanced thermochemical equation for the Haber process, including the heat energy term, is as follows:
N2(g) + 3H2(g) → 2NH3(g) + ΔH
Theoretical Yield Calculation
To determine the theoretical yield of ammonia, we need to calculate the moles of nitrogen and hydrogen and determine the limiting reactant.
First, calculate the moles of nitrogen:
moles of N2 = mass of N2 / molar mass of N2
moles of N2 = 16.55 g / 28.0134 g/mol = 0.5901 mol
Next, calculate the moles of hydrogen:
moles of H2 = mass of H2 / molar mass of H2
moles of H2 = 10.15 g / 2.0159 g/mol = 5.0361 mol
Since the balanced equation has a 1:3 ratio between nitrogen and hydrogen, we can determine that nitrogen is the limiting reactant because it has fewer moles.
Using the balanced equation, we can calculate the theoretical yield of ammonia:
moles of NH3 = (moles of N2) / 2
moles of NH3 = 0.5901 mol / 2 = 0.2951 mol
Finally, calculate the mass of ammonia:
mass of NH3 = moles of NH3 × molar mass of NH3
mass of NH3 = 0.2951 mol × 17.031 g/mol = 5.027 g
Therefore, the theoretical yield of ammonia is 5.027 grams.
Percent Yield Calculation
To calculate the percent yield, we need the actual yield of ammonia. Given that only 8.33 grams of ammonia is obtained, we can calculate the percent yield as follows:
percent yield = (actual yield / theoretical yield) × 100
percent yield = (8.33 g / 5.027 g) × 100 = 165.6%
The percent yield of ammonia is 165.6%.
In summary, the balanced thermochemical equation for the Haber process is N2(g) + 3H2(g) → 2NH3(g) + ΔH. The theoretical yield of ammonia, when 16.55 grams of nitrogen gas and 10.15 grams of hydrogen gas react, is 5.027 grams. The percent yield of ammonia, based on an actual yield of 8.33 grams, is 165.6%. The percent yield indicates the efficiency of the reaction and takes into account any losses or side reactions that may occur during the process.
To learn more about Haber process click here:
brainly.com/question/30928282
#SPJ11
1. Find three examples of household acids and/or bases and their
respective pH values. (1 pt)
2. We use phenolphthalein in the lab as our indicator, what are
two other commonly used acid/base indicato
The pH scale ranges from 0 to 14, where 0 is the most acidic and 14 is the most basic. Household acids and bases can have pH values ranging from highly acidic to slightly basic.
The pH scale is a measure of how acidic or basic a substance is. The pH scale ranges from 0 to 14, where 0 is the most acidic and 14 is the most basic. Household acids and bases can have pH values ranging from highly acidic to slightly basic. For example, vinegar has a pH value of around 2.4, lemon juice has a pH value of around 2, and baking soda has a pH value of around 8.3 when dissolved in water.
Phenolphthalein is a commonly used indicator in the lab to detect acids and bases. Other commonly used indicators include litmus paper and methyl orange. Litmus paper is a simple indicator that changes color in the presence of an acid or base, turning red in the presence of an acid and blue in the presence of a base. Methyl orange, on the other hand, turns red in the presence of an acid and yellow in the presence of a base.
To know more about ranges visit:
https://brainly.com/question/29204101
#SPJ11
15.20 a) Propose a mechanism for the following transformation, and explain why the product shown is the major product. CI 1) MeMgBr(2 equiv.) 2) NH4CI, H₂O
The proposed mechanism for the given transformation involves the addition of MeMgBr (methyl magnesium bromide) followed by treatment with NH4Cl and water. The major product obtained is determined by the electrophilic and nucleophilic character of the reactants involved.
Addition of MeMgBr (methyl magnesium bromide):
MeMgBr, also known as methyl magnesium bromide, is a strong nucleophile and reacts with the electrophilic carbon in the starting compound. In this case, it will attack the carbonyl carbon of the ketone, resulting in the formation of a magnesium alkoxide intermediate.
Treatment with NH4Cl and water:
The next step involves the addition of NH4Cl and water. Ammonium chloride (NH4Cl) and water provide the conditions for hydrolysis of the intermediate. This hydrolysis leads to the formation of an alcohol.
The major product obtained from the given transformation is an alcohol. The addition of MeMgBr as a strong nucleophile attacks the carbonyl carbon, forming a magnesium alkoxide intermediate. Subsequent hydrolysis of this intermediate in the presence of NH4Cl and water results in the formation of the alcohol product. The specific product structure will depend on the starting compound and the specific conditions of the reaction.
To know more about NH4Cl , visit;
https://brainly.com/question/32440518
#SPJ11
Consider how to prepare a buffer solution with pH = 7.24 (using one of the weak acid/conjugate base systems shown here) by combining 1.00 L of a 0.374-M solution of weak acid with 0.269 M potassium hy
Buffer solutions are solutions that help in the maintenance of a relatively constant pH. This happens because the solution contains weak acid/base pairs and resists the change in the pH even when small quantities of acid or base are added to the solution.
The buffer solution is generally prepared from a weak acid and its conjugate base/ a weak base and its conjugate acid or salts of weak acids with strong bases. In order to prepare a buffer solution with pH = 7.24 using one of the weak acid/conjugate base systems, the weak acid/conjugate base pair should be selected such that their pKa value should be near to the desired pH of the buffer solution. The pH of the buffer solution is given by the Henderson-Hasselbalch equation which is given as follows: pH = pKa + log [A-]/[HA] Where, A- is the conjugate base and HA is the weak acid.
Now given the molarity of weak acid and potassium hydride, we can calculate the amount of the weak acid that needs to be added to the solution to prepare the buffer solution. Let's calculate the number of moles of weak acid in the given solution.
The moles of weak acid and conjugate base required for the preparation of the buffer solution can be calculated using stoichiometric calculations. Finally, we can calculate the volume of the buffer solution which is 1.00 L. The buffer solution will have a pH of 7.24.
The required amount of weak acid and potassium hydride should be added to the solution to prepare the buffer solution. The solution should be mixed well so that the components of the solution are uniformly distributed.
To know more about Buffer solutions visit:
https://brainly.com/question/31367305
#SPJ11
Reversible processes are not possible to be achieved in most practical applications. However, they form an important part of the thermodynamics' subject. Briefly explain two (3) reasons why the analysis of reversible processes is useful in thermodynamics.
please do neatly and it in 20 minutes its urgent
Reversible processes are an important part of thermodynamics, despite not being possible to achieve in most practical applications. The following are three reasons why the analysis of reversible processes is useful in thermodynamics:1.
Reversible processes help in determining the maximum efficiency:If a reversible process can be accomplished, it provides information about the maximum efficiency of a cycle. The maximum possible efficiency of a cycle is given by the ratio of the heat input to the heat output.2. Reversible processes help in determining the actual efficiency:If an irreversible process can be modelled as a reversible process, it can be used to calculate the actual efficiency of the cycle. The actual efficiency is always lower than the maximum possible efficiency.
Reversible processes are used to model real-life processes:Although reversible processes are idealized processes, they can be used to model real-life processes. The analysis of reversible processes allows for an understanding of the thermodynamic principles that govern real-life processes. Furthermore, reversible processes provide a useful starting point for the development of more complex models. These models can then be used to design and optimize real-world processes.Long answer is required to elaborate on the above mentioned points.
To know more about efficiency visit:-
https://brainly.com/question/31458903
#SPJ11
discuss the Biochemistry of vision, focusing on i) what part of
the brain controls eyes and how does it do that, ii) what are the
three types of cones in our eyes and what is each one’s specific
fun
i) The primary visual cortex, located in the occipital lobe, controls vision by processing visual information received from the eyes.
ii) The three types of cones in our eyes are red, green, and blue cones, each sensitive to different wavelengths of light, allowing us to perceive color vision.
Biochemistry of Vision Vision is the ability of the body to detect light and interpret it as an image. This process of vision occurs in three stages: capture of light by photoreceptors, transmission of signals through the optic nerve, and processing of these signals in the brain.
The biochemistry of vision, therefore, involves the biochemical reactions that take place within the eye to allow us to see.The part of the brain that controls the eyes and how it does thatThe eyes are controlled by the visual cortex, which is located at the back of the brain.
This part of the brain processes the signals that are transmitted from the eyes through the optic nerve. It does this by interpreting the electrical impulses that are generated by the photoreceptors in the retina.What are the three types of cones in our eyes and what is each one’s specific function?
There are three types of cones in the human eye, each with a specific function. These are:S-cones (short-wavelength cones) - these are sensitive to blue light and are responsible for our ability to see blue and violet light.M-cones (medium-wavelength cones) - these are sensitive to green light and are responsible for our ability to see green light.
L-cones (long-wavelength cones) - these are sensitive to red light and are responsible for our ability to see red light.These three types of cones work together to allow us to see all the colors of the visible spectrum. The brain then processes the information received from these cones to create a visual image.
For more such questions on human eye
https://brainly.com/question/12641604
#SPJ8
What is the % dissociation of an acid, HA 0.10 M, if the solution has a pH = 3.50?
Select one:
a. 0.0032
b. 0.32
c. 2.9
d. 5.0
e. 35
The percent dissociation of the acid HA is 0.32% or 2.9 (approximately) when rounded off to the nearest whole number. Hence, the correct option is c. 2.9.
We can calculate the percent dissociation by calculating the concentration of hydronium ion. The concentration of hydronium ion can be found from the pH of the solution using the equation
pH = -log[H3O+]
The concentration of the acid can be considered equal to the concentration of hydronium ion, [H3O+].
HA(aq) + H2O(l) ⇆ H3O+(aq) + A-(aq)
Initial
0.10----Change-x+x+x
Equilibrium
0.10-x---x+x
The equilibrium constant expression for the above reaction can be written as
Ka = [H3O+][A-]/[HA]
As we can see from the above table, the initial concentration of acid = 0.10 M and the change in concentration of the acid at equilibrium = -x M, so the concentration of acid at equilibrium can be written as:
[HA] = (0.10 - x) M
The concentration of hydronium ion at equilibrium is equal to the concentration of A- ion at equilibrium, so the concentration of hydronium ion can be written as:
[H3O+] = x
The dissociation constant expression can be written as
Ka = (x^2)/(0.10 - x)
Using the given pH, the concentration of hydronium ion can be calculated:
[H3O+] = 10^(-pH)
= 10^(-3.50)
= 3.16 × 10^(-4) M
Now, substituting the value of [H3O+] in the dissociation constant expression:
Ka = (3.16 × 10^(-4))^2/(0.10 - 3.16 × 10^(-4))
= 1.6 × 10^(-7)
The percent dissociation can be calculated as:
% Dissociation = (Concentration of A- ion / Initial concentration of acid) × 100
As the acid HA is monoprotic, the concentration of A- ion is equal to the concentration of hydronium ion, so:
% Dissociation = (Concentration of hydronium ion / Initial concentration of acid) × 100
% Dissociation = ([H3O+] / [HA]) × 100
% Dissociation = (3.16 × 10^(-4) / 0.10) × 100
% Dissociation = 0.32%
The percent dissociation of the acid HA is 0.32% or 2.9 (approximately) when rounded off to the nearest whole number. Hence, the correct option is c. 2.9.
Learn more About percent dissociation from the given link
https://brainly.com/question/16036681
#SPJ11