Which of the following will oxygen react with to cause combustion?
O A. A hydrocarbon
O B. Heat
O C. Carbon dioxide
O D. Water
HELP

Answer:

3) The amount of matter within the system remains the same

5) The cycle has a well-defined starting and stopping point.

Explanation:

A closed system is a system that the boundaries of a system cannot be passed by either matter or energy.

Hence, generalisations can be made based on a closed system and the law of conservation of mass which states that matter can neither be created nor destroyed but can only change form.

Answer:

Deposition

Explanation:

Deposition is a process that lays down sediment and changes the shape of the land.

The specific heat of an unknown substance is 0.96 J/(g·ºC).

The specific heat capacity of a substance can be described as the quantity of heat needed to raise the temperature in one unit of substance by 1 degree Celcius.

Whenever the heat is lost or absorbed there is a change in the temperature of the substance:

Q = mCΔT

Given, the amount of energy released, Q = 12 cal

The initial temperature of the substance = 25.0ºC

The final temperature of the substance = 20.0ºC

The change in the temperature of a substance, ΔT = 25 -20 = 5°C

The mass of the substance, m = 2.50 g

We have to find the specific heat capacity of an unknown substance.

12 cal = 2.50 g × C × 5°C

C = 0.96 J/(g·ºC)

Therefore, the specific heat capacity of an unknown substance is equal to 0.96 J/(g·ºC).

Learn more about specific heat capacity, here:

brainly.com/question/28302909

#SPJ2

The amount of heat needed to raise a substance's temperature by one degree Celsius per gram is known as specific heat. The specific heat in J/(gºC) of an unknown substance is 0.96 J/gºC.

The amount of heat needed to increase the temperature of the entire substance by one degree is the heat capacity of a substance. Specific heat capacity is what is used when the substance's mass is equal to one.

The hydrogen bonds in water, which account for its high specific heat.

The expression used to calculate the specific heat capacity is:

Q = mcΔT

Here Q = 12 Cal

m = 2.50 g

T₁ = 25.0ºC

T₂ = 20.0ºC

ΔT = 5°C

12 cal = 2.50 g × c × 5°C

c = 0.96 J/gºC

To know more about specific heat, visit;

https://brainly.com/question/31608647

#SPJ3

Answer:

A

Explanation:

.75 + .25 + 1.25 = 2.25 atm

1 atm is 760 mm hg

2.25 * 760 = 1710 mm HG

Answer:

[tex]\huge\boxed{\sf 2.25\ atm = 1710\ mm\ of\ Hg}[/tex]

Explanation:

Partial pressure of gas A = 0.75 atm

Partial pressure of gas B = 0.25 atm

Partial pressure of gas C = 1.25 atm

Total partial pressure = 0.75 atm + 0.25 atm + 1.25 atm

= 2.25 atm

We know that:

1 atm = 760 mm of Hg

Multiply 2.25 to both sides

2.25 atm  = 760 × 2.25 mm of Hg

2.25 atm = 1710 mm of Hg

[tex]\rule[225]{225}{2}[/tex]

Answer:

the answer is 12

Explanation:

In one formula unit of Al2(SO4)3 A l 2 ( S O 4 ) 3 , there would be twelve atoms of oxygen.

Principle: Orbital size & main energy level

Angular: Orbital shape

Magnetic: Orbital orientation

Orbital size is Principle; main energy level is Principle; shape is Angular; orientation is Magnetic

Principle:

imagine a bullseye. each ring shows how far its from the nucleus

Angular:

0 looks like circle

1 looks like a bowtie

2 looks like a flower or 4 leaf clover

3 looks like multiple lobes

Principle Quantum Number: It describes the size of the orbital and the main energy level. It is represented by n. Where, n = 1,2,3,4....stands for K, L, M, N shell and so on..

Angular momentum Quantum Number : It describes the shape of the orbital. It is represented as 'l'. The value of l ranges from 0 to (n-1). For l = 0,1,2,3... the orbitals are s, p, d, f...

Magnetic Quantum Number : It describes the orientation of the orbitals. It is represented as . The value of this quantum number ranges from . When l = 2, the value of  will be -2, -1, 0, +1, +2.

https://brainly.com/question/16979660

The freezing points of each of the solutions are as follows;

0.100 m K2S -   - 0.558oC

21.5 g of CuCl2 in 4.50 * 102 g water -   -2oC

5.5% NaNO3 by mass (in water)​ -     - 2.6oC

The freezing point is the point at which liquid changes to solid. Let us now look at the freezing point of each solution.

a)

Since;

ΔT = K m i

K = 1.86 oC m-1

m = 0.100 m

i = 3

ΔT =   1.86 oC m-1 * 0.100 m * 3 = 0.558oC

Freezing point = 0oC - 0.558oC =  - 0.558oC

b) Number of moles of CuCl2 = 21.5 g/134.45 g/mol = 0.16 moles

molality = 0.16 moles/0.45 Kg = 0.36 m

ΔT = K m i

ΔT =  1.86 oC m-1 * 0.36 m * 3 = 2oC

Freezing point = 0oC - 2 = -2oC

c) Number of moles of NaNO3 = 5.5g/85 g/mol = 0.065 moles

molality of the solution =  0.065 moles/0.0945 Kg = 0.69 m

ΔT =  1.86 oC m-1 * 0.69 m * 2 = 2.6oC

Freezing point = 0oC - 2.6oC = - 2.6oC

Learn more about freezing point: https://brainly.com/question/3121416?

Answer:

Transcribed image text: Answer.

the following question for the mixing of gaseous hydrogen chloride with water to make hydrochloric acid. HCl) + H2O(2) → H30*) + Cl (2) What is the phase label on HCI? aq

       In chemistry and biology, hydrolysis refers to a twofold decomposition reaction in which water participates.

       HCl's conjugate base is Cl in the reaction HCl+H2O+H3O++.

       An acidic solution is created when hydrogen chloride gas and water interact. The reaction's equation is displayed. Cl - + H3O + HCl + H2O

        Hydroxide ion is base 2, and its conjugate acid (water) is acid1. Acid1 is HCl, and its conjugate base is base1.

        The conjugate base of hydrochloric acid is the chloride ion. The hydroxide ion's conjugate acid is water

        H3 O+1 is the conjugate acid of H2 O. The electrical charge on water increases by one when one hydrogen ion is added. Hydrogen is also known as H3 O+1.

       In a reversible chemical reaction, H 2O and HCl join upon contact to create hydronium cations [H 3O] + and chloride anions Cl : HCl + H 2O [H 3O] + + Cl. The resulting mixture is a potent acid known as hydrochloric acid.

To learn more About hydrolysis, Refer:

https://brainly.com/question/4352413

#SPJ2

Answer:

True

Explanation:

Answer:

true

Explanation:

The equation that shows how frequency is related to velocity and wavelength is f = v / λ (Option A)

This is defined as the number of oscillations made in one second. It is expressed as

Frequency (f) = 1 / period (T)

f = 1 / T

The velocity, frequency and wavelength of a wave are related according to the following equation

v = λf

Making f the subject, we have

f = v / λ

Thus, we can conclude that the correct answer to the question is:

f = v / λ (Option A)

Learn more about wave:

https://brainly.com/question/14630790

Answer:

About 0.164 g of glucose.

Explanation:

We can determine the mass of glucose produced given the volume of oxygen gas produced with stoichiometry.

Recall that at STP, a mole of any gas occupies a volume of 22.4 L.

From the reaction, six moles of oxygen gas is produced for every one mole of glucose.

Lastly, the molecular weight of glucose is 180.18 g/mol.

Therefore:
[tex]\displaystyle \begin{aligned} 122\text{ mL O$_2$} & \cdot \frac{1\text{ L O$_2$}}{1000\text{ mL O$_2$}}\cdot \frac{1\text{ mol O$_2$}}{22.4\text{ L O$_2$}} \cdot \frac{1\text{ mol C$_6$H$_{12}$O$_6$}}{6\text{ mol O$_2$}} \cdot \frac{180.18\text{ g C$_6$H$_{12}$O$_6$}}{1\text{ mol C$_6$H$_{12}$O$_6$}} \\ \\ & = 0.164\text{ g C$_6$H$_{12}$O$_6$}} \end{aligned}[/tex]

Therefore, about 0.164 g of glucose is produced.

Answer:

heat carbunate

Explanation:

thats true im good in here like and heart byebye

The mass of fluorine that were formed is 592 mg

From the question, we are to determine the mass of fluorine formed

First, we will write the balanced chemical equation for the decomposition reaction

The balanced chemical equation for the reaction is

CaF₂ → Ca + F₂

This means

1 mole of calcium fluoride decomposes to give 1 mole of calcium and 1 mole of fluorine

Now, we will determine the number of moles of calcium produced

From the given information,

Mass of calcium produced = 625 mg = 0.625 g

Using the formula,

[tex]Number\ of \ moles =\frac{Mass}{Atomic\ mass}[/tex]

Atomic mass of calcium = 40.078 g/mol

Then,

Number of moles of calcium produced = [tex]\frac{0.625}{40.078}[/tex]

Number of moles of calcium produced = 0.01559 mole

Since

1 mole of calcium fluoride decomposes to give 1 mole of calcium and 1 mole of fluorine

Then,

0.01559 mole of calcium fluoride will decompose to give 0.01559 mole of calcium and 0.01559 mole of fluorine

∴ Number of mole of fluorine formed was 0.01559 mole

Now, for the mass of fluorine formed

Using the formula,

Mass = Number of moles × Molar mass

Molar mass of fluorine = 38 g/mol

Then,

Mass of fluorine formed = 0.01559 × 38

Mass of fluorine formed = 0.59242 g

Mass of fluorine formed = 592.42 mg

Mass of fluorine formed ≅ 592 mg

Hence, the mass of fluorine that were formed is 592 mg.

Learn more on Stoichiometry here: https://brainly.com/question/13934753

Answer:

The answer is Polar.

Explanation:

Because polar has many unique properties.

1000*

Explanation:

the deter monagex has to neutralize power because of the error and that leads to 1000*

Answer:

Particles in the liquid state have greater IM attractive forces than in the gas state.

The molecular formular shows all the atoms in the compound. The molecular formula of the compound is C15H10O5.

The molecular formula is the formula of the compound that shows the total number of atoms in a compound.

We know that;

ΔT = K m i

ΔT = 26.4°C

K = 40.0°C kg/mol

m = ?

i = 1

26.4°C = 40.0°C kg/mol * m * 1

m = 26.4°C/40.0°C kg/mol  = 0.66 m

We know that

m = mass/molar mass ÷ mass of solvent(in Kg)

Let the molar mass be MM

m = 3.044 g/MM ÷ (18 * 10^-3 Kg)

0.66 m =  3.044 g/0.018MM

0.66 m  * 0.018MM =  3.044 g

MM = 3.044 g/0.66 m  * 0.018

MM = 256 g/mol

Now;

Mass of C =  17.80 * 10^-3/44 * 12 = 0.00485 g

Moles of C = 0.00485 g/12 g/mol = 0.0004 moles

Mass of H = 2.08 * 10^-3/18  * 2 = 0.0002 g

Moles of H =  0.0002 g/1 g/mol = 0.0002 moles

Mass of O = [7.40 * 10^-3 - (0.00485 + 0.0002)] = 0.00235 g

Moles of O = 0.00235 g/16 g/mol = 0.000147 moles

Divide through by the lowest number of moles;

C - 0.0004/0.000147  H - 0.0002/0.000147  O - 0.000147 /0.000147

C - 3   H  -  2  O -  1

The empirical formula is C3H2O

So;

[3(12) + 2(1) + 1(16)]n = 256

[36 + 2 + 16]n = 256

n = 5

Molecular formula = C15H10O5

Learn more about molecular formula: https://brainly.com/question/14425592?

Answer:

the answer has been given below have a good day

Explanation:

mark as brainiest

The species are present at 10-6 mole/L or greater when dissolved in water is when in solutions, weak acids and bases partially ionize.

Ionization is defined as anything that causes electrically neutral atoms or molecules to gain or lose electrons in order to become electrically charged atoms or molecules (ions).  One of the main mechanisms by which radiation, including charged particles and X-rays, transmits their energy to matter is ionization. An anion is created when an atom or molecule picks up an electron; a cation is created when they lose an electron.

Weak Acids and Weak Bases Ionizing. Numerous acids and bases are weak, meaning they do not completely ionize in aqueous solution. The nonionized acid, hydronium ion, and conjugate base of a weak acid are all mixed together to form a solution in water, with the nonionized acid being present in the highest concentration.

Thus, the species are present at 10-6 mole/L or greater when dissolved in water is when in solutions, weak acids and bases partially ionize.

To learn more about ionization, refer to the link below:

https://brainly.com/question/28385102

#SPJ2

According to the image in this question, the type of reaction shown is that of fission because nuclei are being split into smaller and smaller places.

Nuclear fission in radioactivity is the process whereby the nuclei of atoms split into smaller particles.

In the above diagram, an atom of uranium is labeled and its nucleus is shown to split into smaller particles in succession.

Therefore, the reaction exemplifies a nuclear fission because nuclei are being split into smaller and smaller places.

Learn more about fission at: https://brainly.com/question/2732120

From the equation of te reaction, we know that the mass percent  of NaOH in the mixture is 1.4%.

Neutralization is a reaction that occurs between an acid and a base to yield salt and water only.

In tis case, the reaction of the NaOH and HCl occurs as follows; NaOH + HCl ----> NaCl + H2O

Number of moles of HCl reacted = 15/1000 * 0.5 moldm-³ = 0.0075 moles

Since the reaction is 1:1, 0.0075 moles of NaOH reacted.

Mass of NaOH =  0.0075 moles of NaOH * 40 g/mol = 0.3 g

Percent of NaOH = 0.3 g/21.10g * 100/1 = 1.4%

Learn more about percent concentration: https://brainly.com/question/202460

Answer:

15 atoms left after 3 half lives

Explanation:

17145 y / 5715 y/halflife = 3 half lives

(1/2)^3 = 1/8 of original is left

1/8 ( 120 atoms) = 15 atoms left

So

Moles of Oxygen:-

3 mol of O_2 produces 2 mol SO_2

1 mol of ao_2 produces 2/3=0.6mol So_2

1.396 mol produces 0.8376mol SO_2

Mass of SO_2

Answer:

i dont knoe but yea just on here

Explanation:n:

hi hi hi hi

Answer: Look up a video, and they will tell/show you.

Convection is the movement of fluid (this can wether be liquid or gas) and as they move, they carry heat along with them.

Answer:

Convection

More info:

Heat transfers include the following: Conduction, Convection, and Radiation.

I am open to corrections if I accidentally included false information :).

#learnwithbrainly

The specific heat of a mystery substance that requires 79 joules of energy to heat 4.52 grams of substance from 23 degrees Celsius to 54 degrees Celsius is 0.56 J/g°C.

The specific heat capacity of a substance can be calculated using the following formula:

Q = mc∆T

Where;

c = Q/m∆T

c = 79 ÷ 4.52 × (54 - 23)

c = 79 ÷ 140.12

c = 0.56 J/g°C

Therefore, the specific heat of a mystery substance that requires 79 joules of energy to heat 4.52 grams of substance from 23 degrees Celsius to 54 degrees Celsius is 0.56 J/g°C.

Learn more about specific heat capacity at: https://brainly.com/question/2817451

Answer:

B

Explanation:

A mixture in which the composition is not uniform throughout.

Same thing letter B says.

Answer:

Plant Adaptations is a unique feature a plant has that allows it to live and survive in its own particular habitat (the place that it lives). Desert Plant Adaptations – Plant Adaptation is really a unique have a plant has that enables it to reside and survive in the own particular habitat (the area it lives).

Explanation: