Answer:
i
Explanation:
Answer:1
Explanation:v
Which of the following is not a property of water?
A. It dissolves most ionic substances.
B. It has a lower density than most liquids do.
C. It has a higher density in the liquid state than in the solid state.
D. It has a high specific heat.
Answer:
b.it has a lower density than most liquid do
Molecules in a substance change into a new kind of molecule during a phase change.
Answer:
A phase change is occurring; the liquid water is changing to gaseous water, or steam. On a molecular level, the intermolecular forces between the water molecules are decreasing. The heat is providing enough energy for the water molecules to overcome these attractive forces.
Please mark as brainliest
Have a great day, be safe and healthy
Thank u
XD
The phase transition takes place at the molecular level by changing the strength of intermolecular forces between the molecules.
What is phase change?Phase changes can be defined as the physical processes of transition between a state of a medium, identified by some parameters. These changes in states of matter that can be written as liquid, gas, solid, and plasma.
A particular phase in a thermodynamic system exhibits uniform physical properties. During a phase transition, some properties of the medium change, because of the change in external conditions, such as temperature, and pressure.
In a solid state, the molecules are compactly bound by a strong force of attraction. In the liquid state, the molecules have lesser attraction forces. The phase changes depend upon the temperature and pressure.
Therefore, phase transitions occur on a molecular level as the alteration in the strength of intermolecular forces.
Learn more about phase changes, here:
brainly.com/question/14817790
#SPJ2
HELP ME PLEASE!!!!! I NEED TO GET THIS RIGHT I CANT FAIL
The following reaction shows the products when sulfuric acid and aluminum hydroxide react.
2Al(OH)3 + 3H2SO4 → Al2(SO4)3 + 6H2O
The table shows the calculated amounts of reactants and products when the reaction was conducted in a laboratory.
Initial Mass and Yield:
Sulfuric Acid Aluminum Hydroxide
Initial Amount of Reactant 40 g 1.5 g
Theoretical Yield of Water from Reactant 14.69 g 10.38 g
What is the approximate amount of the leftover reactant? (4 points)
a.11.73 g of sulfuric acid
b.10.33 g of sulfuric acid
c.11.12 g of aluminum hydroxide
d.13.67 g of aluminum hydroxide
Answer:
c.11.43 g of aluminum hydroxide
Explanation:
Aside from direct harm, what secondary issue do invasive species present?
They may be able to eat all kinds of native organisms.
They might introduce other organisms like viruses and bacteria.
They might damage the habitat that other organisms rely on.
They may not have any predators.
Answer:
B
Explanation:
Please help! Will give brainliest
Answer:
Letter C is the answer Hope it helps!
what happens to some of the electrons in an atom when the atom is heated
Answer:
When the electrons in the atom are excited, for example by being heated, the additional energy pushes the electrons to higher energy orbitals. When the electrons fall back down and leave the excited state, energy is re-emitted in the form of a photon
Explanation:
please help due in 2 minutes
Answer:
1
Explanation:
the answer is the first option because it's at less of an incline than the others, hope this helps!
Take your time please.
1. Dependant Variable
2. Scientific Method
3. Data
4. Consistency
5. Metric Balance
6. Mean
7. Technology
8. Dependant Variable
9. Hypothesis
10. Spring Scale
Explanation:Hello! I hope this helped and please correct me if some are wrong. I did my research and matched them. Have a good one!
(>‿◠)✌Answer:
dependent variablescientific methodDataconsistency metric balancemeantechnologydependent variablehypothesisspring scalehope it is helpful to you
what explains the bonding in a compound made from carbon and hydrogen
1) ch4 because every hydrogen gets two electrons to bond
2) ch4 because 8 electrons are shared in this molecule
Answer:
2) ch4 because 8 electrons are shared in this molecule
Explanation:
The bond between carbon and hydrogen in the molecule; CH4 is a covalent bond. This bond involves sharing of electrons. Carbon has a valency of 4 and needs four more electrons to complete it's electronic configuration. These 4 electrons are taken care of by the 4 hydrogen atoms which each have a valency of 1.
A gas
A. has a definite shape but no definite volume.
B. Has both a definite shape and a definite volume.
C. Has a definite volume but no definite shape.
D. Has no definite shape and no definite volume.
Answer:
D
Explanation:
Has no definite shape and no definite volume
A balloon is filled with 30.0 L of helium in the morning when the temperature is 25.00 ℃. By noon the temperature has risen to 55.00 ℃. Determine the new volume of the balloon. *
Answer:
33.0 L
Explanation:
Step 1: Given data
Initial volume of the balloon (V₁): 30.0 LInitial temperature (T₁): 25.00 °CFinal volume of the balloon (V₂): ?Final temperature (T₂): 55.00 °CStep 2: Convert the temperatures to the Kelvin scale
We will use the following expression.
K = °C + 273.15
T₁: K = 25.00°C + 273.15 = 298.15 K
T₂: K = 55.00°C + 273.15 = 328.15 K
Step 3: Calculate the final volume of the balloon
If we assume ideal behavior, we can calculate the final volume of the balloon using Charles' law.
V₁/T₁ = V₂/T₂
V₂ = V₁ × T₂/T₁
V₂ = 30.0 L × 328.15 K/298.15 K = 33.0 L
hen CO(g) reacts with O2(g) to form CO2(g) , 283 kJ of energy are evolved for each mole of CO(g) that reacts. Write a balanced thermochemical equation for the reaction with an energy term in kJ as part of the equation. Note that the answer box for the energy term is case sensitive. Use the SMALLEST INTEGER coefficients possible and put the energy term (including the units) in the last box on the appropriate side of the equation. If a box is not needed, leave it blank.
Answer:
2CO + O2 =====> 2CO2 ΔH = -566 KJ
Explanation:
A thermochemical equation is a chemical equation that includes the enthalpy change of the reaction (Lumen Learning).
In a thermochemical equation, we can easily see the heat of reaction written after the symbols of reactants and products. It tells us whether heat was evolved or gained in the chemical process. When heat is gained ΔH = positive. When heat is evolved, ΔH = negative.
The thermochemical equation for the reaction of CO and O2 is shown below;
2CO(g) + O2(g) =====> 2CO2 (g) ΔH = -566 KJ
HELPPP PLZz nowww!!!
A. C
B. B
C. A
D. D
Answer:
b
Explanation:
Answer:
answer b I think so I'm.not clear about it ,I think its CRT ans plz follow me
what is the volume, in liters, of 5.500 mol of C3H3 gas at STP
Answer:
123.2 Liters.
Explanation:
At STP (T = 273K & P = 1atm), one mol of any gas will occupy 22.4 liters.
With the above information in mind, we can calculate how many liters would 5.500 mol of gas occupy:
5.500 mol * 22.4 L / mol = 123.2 L
So 5.500 moles of C₃H₃ would have a volume of 123.2 liters at STP.
which of the following statement about genes and trait is true
Answer:
Genes are segments of deoxyribonucleic acid (DNA) that contain the code for a specific protein that functions in one or more types of cells in the body.
Chromosomes are structures within cells that contain a person's genes. A trait is any gene-determined characteristics and is often determined by more than one gene.
for study island:
A single trait can be controlled by multiple genes.
A single gene can influence multiple traits.
what is the mass of 5 litres of oxygen at STP
Answer:
First and foremost, keeping in mind that at room temperature, Oxygen is a gas.
So, Volume of Oxygen(O2) given = 5.6L.
Finding moles, Moles=Volume/22.4.
Moles= 5.6/22.4=1/4moles.
So, finding mass of O2= moles × Mol. Wt.
Mass( in grams) = 1/4 × 32. We have taken 32 as oxygen is is combined state O2, so 16×2=32.
We get, mass =8 grams. This is mass not active mass.
Active mass means molarity which will be
0.25/5.6= 0.044
12.9K views
View 24 upvotes
24
1
1 comment from Harleen Kaur
Sponsored by EasyKnock
According to standard temperature and pressure conditions, the mass of 5 litres of oxygen is 0.157 g.
What are standard temperature and pressure conditions?Standard temperature and pressure are defined as a standard set of conditions required for experimental measurements which are established to allow comparison between different sets of data.
Standards which are commonly used are those International Union of pure and applied chemistry and national institute of standards and technology.These are not universally accepted standards but are the ones which are commonly used.
According to ideal gas equation, mass=PV×molar mass/RT= 1×22.4×16/8.314×273=0.157 g.
Thus, the mass of 5 litres of oxygen is 0.157 g.
Learn more about standard temperature and pressure,here:
https://brainly.com/question/29129606
#SPJ2
Baking soda (NaHCO3, 84.0 g/mol) requires acids from other ingredients to generate the carbon dioxide needed to make bread rise. The following equation describes this reaction, where HB is some unspecified acid. If 20.4 g of baking soda are used in a recipe and enough acid is present for a complete reaction, how many moles of carbon dioxide are generated?
HB + NaHCO3 ⟶ H2O + CO2 + NaB
a. 0.243 mol
b. 0.204 mol
c. 0.334 mol
d. 0.232 mol
e. 0.464 mol
Mark the statements which are correct. A. All of the following elements are expected to gain electrons to form ions in ionic compounds: Ga, Se and Br. B. The symbols for the elements magnesium, aluminum and xenon are Mn, Al and Xe, respectively. C. The metals Co, Cu and Ti all require Roman numerals in the names of their compounds. D. The elements Co, Ni, and Hg are all transition elements.E. The elements P, As, and Bi are in the same family on the periodic table.
Answer:
The metals Co, Cu and Ti all require Roman numerals in the names of their compounds.
The elements Co, Ni, and Hg are all transition elements.
The elements P, As, and Bi are in the same family on the periodic table.
Explanation:
Transition elements are those which changes their charges as they bond with other elements or forms a compound with other elements. They show transitional behavior when they bond. Some of the transition elements are :
Chromium, Titanium, cobalt, mercury, copper, iron, vanadium, zinc, Silver, etc.
The transition elements use roman numerals in their names of the compounds.
Therefore, Cobalt (Co), Copper (Cu) and Titanium (Ti) are the elements that require a Roman numeral in the names of their compounds.
The elements Phosphorus (P), Arsenic (As) and Bismuth (Bi), they all belong to the nitrogen family of Group 15 (Va).
People can hear ultrasound easily.
A. True
B. False
Draw the structure of the product formed when the given compound is heated in aqueous base. The formula for the product is C8H12O. The starting material is a 6 carbon chain where carbon 1 is an aldehyde, carbon 2 has two methyl substituents and carbon 4 is double bonded to an oxygen. THis reacts with N a O H, water and heat.
Answer:
Please find the graph file in the attachment file.
Explanation:
How many moles of Cu are in 1.48 × 1025 Cu atoms?
24.6 mol Cu
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to RightChemistry
Atomic Structure
MolesAvogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.Stoichiometry
Using Dimensional AnalysisExplanation:Step 1: Define
[Given] 1.48 × 10²⁵ atoms Cu
[Solve] moles Cu
Step 2: Identify Conversions
Avogadro's Number
Step 3: Convert
[DA] Set up: [tex]\displaystyle 1.48 \cdot 10^{25} \ atoms \ Cu(\frac{1 \ mol \ Cu}{6.022 \cdot 10^{23} \ atoms \ Cu})[/tex][DA] Divide [Cancel out units]: [tex]\displaystyle 24.5766 \ mol \ Cu[/tex]Step 4: Check
Follow sig fig rules and round. We are given 3 sig figs.
24.5766 mol Cu ≈ 24.6 mol Cu
50 POINTS!! PLZ HELP! SCIENCE QUESTION!
Answer:
C im pretty sure
Explanation:
Because it is facing the opposite direction with opposite colors.
Which sentences describe decomposers in a food chain?
They are the final link in the energy flow in a food chain or a food web. They are fungi and animals that feed on dead organic matter. Plants
produce food or energy from raw materials. Plants are also known as autotrophs because they can produce organic compounds from inorganic
chemicals. Bacteria, fungi, worms, and snails recycle the garbage of dead matter and give back nutrients into the ecosystem.
Answer:
hey are the final link in the energy flow in a food chain or a food web. They are fungi and animals that feed on dead organic mattet.
Explanaticuz im naruto uzamaki
Given the unbalanced equation:
_C3H8(g) + _O2(g) -> _H2O(g) + _CO2(g)
When the equation is completely balanced using
smallest whole numbers, the coefficient of O2
Answer:
C3H8 + 502 ----> 3CO2 + 4H20
Explanation:
Compare and contrast the three states of matter liquid, solid, and gas.
Answer:
For example: water is liquid, ice is solid, and water vapor is gas
Explanation:
how are elements classified organized?
during periods of strenuous activity muscle cells run low on
Answer: the answer is in the photo pls check and pls pls mark me as brainliest
Explanation:
During periods of strenuous activity muscle cells run low on oxygen.
What are muscle cells?Muscle cells are defined as the cellular components of muscle tissue. Muscle cells are designed to contract, or produce a pulling force, in order to stabilize or move different body parts. Skeletal, visceral, and heart muscle cells are the three different types. They are located in the organs' hollow walls. The muscular system is made up of a variety of muscle types, each of which is essential to how the body works.
Lactic acid is produced and accumulates in the muscle when there is a high energy demand, rapid changes in the energy requirement, and a lack of oxygen. During prolonged, intense activity, muscle pH falls to 6.4–6.6. Your muscles are forced to contract as forcefully as they can during this form of exercise, which results in an increase in the number of contractile filaments in your muscle cells.
Thus, during periods of strenuous activity muscle cells run low on oxygen.
To learn more about muscle cells, refer to the link below:
https://brainly.com/question/28465505
#SPJ2
explain the variation of basicity in group III A members down the group
Answer:
Explained below
Explanation:
Group 3A elements are made up of the metalloid - boron (B) and other metals such as Aluminum (Al), gallium (Ga), indium (In), & thallium (Tl).
Now, as we go down the group, the size of the central atom will increase thereby causing the lone pair to become delocalized over a larger volume space. Thus, it's not readily available for donation and thus basicity increases
It is device used to measure thee temperature of food/fish
What is the mass of 2.9 moles of calcium? Show all work!
Answer:
the mass of 2.9 moles of calcium is 116 g
Explanation:
The computation of the mass of 2.9 moles of calcium is shown below
As we know that
Mole = mass ÷ molar mass
where,
Moles be 2.9
And, we know that the molar mass of calcium be 40g/mol
Now put the values to the above formula
2.9 = Mass ÷ 40
So, the mass would be
= 40 × 2.9
= 116 g
Hence, the mass of 2.9 moles of calcium is 116 g