what ore is turned to finished aluminum
What is the mass of the oxygen in one mole of calcium phosphate
Answer:
16.00 g/mol
Explanation:
Answer:
16.00 g/mol
Explination:
1 mol of calcium phosphate contains 8 moles of oxygen. From this, we can compute for the amount of oxygen in grams using the molar mass of oxygen, which is 16.00 g/mol.
The pressure inside a hydrogen-filled container was 2.10 atm at 21 ∘C. What would the pressure be if the container was heated to 91 ∘C?
Answer:
[tex]P_2=2.60atm[/tex]
Explanation:
Hello!
In this case, since the temperature and pressure are related via a directly proportional relationship, via the Gay-Lussac's law we can write:
[tex]\frac{P_1}{T_1} =\frac{P_2}{T_2}[/tex]
Thus, since the initial temperature in kelvins is 294.15 K and the final temperature in kelvins is 364.15 K, we can compute the final pressure as shown below:
[tex]P_2=\frac{P_1T_2}{T_1} =\frac{2.10atm*364.15K}{294.15K}\\\\P_2=2.60atm[/tex]
Best regards!
Answer:
2.63 atm
Explanation:
the answer is 2.63 atm
how many neutrons make up one of these potassium atoms?
Answer:
20 Neutrons
Explanation:
The element of potassium has the symbol K. The nucleus of an atom of potassium contains 19 protons and 20 neutrons. I hope that answer helps xx
Which elements-O2, Rb, Sb, Pt, Y, Sm, Mn, Rh, Sn, Li-will react (a) with a solution of I to generate I2; (b) with a solution of Ag' to generate Ag; and (c) with a solution of Nat to generate Na?
Answer:
a) O2, Pt, Rh
b) Rb, Y, Sm, Mn, Sn, Li
c)Rb
Explanation:
We must consider the reduction potentials of each of the species in the question.
In (a) above, all the elements whose reduction potential is higher than the redox potential for the oxidation of I^- will react with a solution of I^- to generate I2 as shown above.
In (b) above, all the strong reducing agents can donate electrons to Ag^+ and reduce it to Ag as shown above.
In (c) Rb has a more negative reduction potential than sodium hence it can react with a solution of sodium salt to generate sodium metal.
In the third century B.C., King Hieron of Syracuse asked the famous mathematician Archimedes to determine if his crown was made of pure gold. This was a puzzling problem for Archimedes-he knew how to measure the weight of the crown, but how could he measure the volume? Archimedes solved the problem when he got into his bath and noticed the water spilling over the sides of the tub. He realized that the volume of the displaced water must be equal to the volume of the object placed into the water. Archimedes was so excited by. his discovery that he jumped out of the bath and ran through the streets shouting "Eureka!" a. How can you tell if a crown is made of solid gold? b. Gold is one of the densest substances known, with a density of 19.3 g/mL. If the gold in the crown was mixed with a less-valuable metal like bronze or copper, how would that affect its density? c. What is the relationship between the object density, the liquid density, and the tendency of the object to float? d. From the experimental results obtained by you in the lab of the density of the liquid and the object, could the object float in that liquid? Explain.
Answer:
See explanation
Explanation:
a. I can conclusively tell if the crown was made of gold by measuring its density. First the mass of the crown is measured on a weighing balance. The crown is now put into a given volume of water and the volume of water displaced is accurately measured. The density of the crown is computed as mass/volume of fluid displaced. If the density of the crown is 19.3 g/mL, then it is made of solid gold.
b) When less valuable metals such as bronze or copper is mixed with gold in the crown, the density of the crown decreases and the crown becomes more brittle.
c) An object will float in a liquid when the density of the object is less than the density of the liquid. Hence the tendency of an object to float in a liquid depends on the density of the object and the density of the liquid.
d) Even though i do not know the results from your experiment but as regards the decision as to whether the object will float in the given liquid or not, reference must be made to the measured density of the object as well as the given density of the liquid. If the object is less dense (from values of density obtained from the experiment) than the liquid, then the object will float in the liquid and vice versa.
Determine the number of Au atoms found in 5.18 grams of gold.
A.1.02x1022 atoms
B. 3.84 x 1022 atoms
C.2.13 x 1022 atoms
D.4.58x1022 atoms
1.58 x 1022. atoms
Please let me know
Answer:
1.58× 10²² atoms of Au
Explanation:
Given data:
Mass of gold = 5.18 g
Number of atoms of gold = ?
Solution:
First of all we will calculate the number of moles of gold.
Number of moles = mass/molar mass
Number of moles = 5.18 g/196.96 g/mol
Number of moles = 0.0263 mol
Number of atoms:
Avogadro number.
It is the number of atoms , ions and molecules in one gram atom of element, one gram molecules of compound and one gram ions of a substance.
The number 6.022 × 10²³ is called Avogadro number.
1 mole = 6.022 × 10²³ atoms of Au
0.0263 mol × 6.022 × 10²³ atoms of Au / 1mol
0.158× 10²³ atoms of Au
1.58× 10²² atoms of Au
Calculate the Molarity when a 6.11 mL solution of 0.1 H2SO4 is diluted with 105.12 mL of water
Molarity after dilution : 0.0058 M
Further explanationThe number of moles before and after dilution is the same
The dilution formula
M₁V₁=M₂V₂
M₁ = Molarity of the solution before dilution
V₁ = volume of the solution before dilution
M₂ = Molarity of the solution after dilution
V₂ = Molarity volume of the solution after dilution
M₁=0.1 M
V₁=6.11
V₂=105.12
[tex]\tt M_2=\dfrac{M_1.V_1}{V_2}=\dfrac{0.1\times 6.11}{105.12}=0.0058~M[/tex]
branches of sicence
Answer:
Natural science can be divided into two main branches
Explanation:
life science and physical science. Life science is alternatively known as biology, and physical science is subdivided into branches: physics, chemistry, astronomy and Earth science.
Answer:
Astronomy
Biology
Geology
Chemistry
Please Mark Brainliest and rate me 5
Thank You Good Night / Good Day to you
Arrange the following compounds in order of increasing acidity, and explain the reasons for your choice of order. Enter your answer in the answer box below. a. 4-nitrophenol b. cyclohexanol c. 2,6-difluorocyclohexanol d. 4-bromophenol
Answer:
(a) > (d) > (c) > (b)
Explanation:
Acidic character is based upon inductive effect of the functional group that are attached to parent chain.
1. Nitro is a -I group which makes phenol acidic due to increased resonance, 2. bromine is a -I group but it is weaker than nitro group
3. phenol is more acidic than cyclohexanol due to resonance stabilization of resonance and among halogen F>Cl>Br>I is the order of acidity
4. cyclohexanol will be weakest as it is not associated with any -I groups here.
so the order of acidity will be
(a). 4-nitropheno > (d). 4-bromophenol > (c). 2,6-difluorocyclohexanol > (b). cyclohexanol
Suppose the Cu ions are produced by the reaction of 0.94 g of copper turnings with excess nitric acid. How many moles of Cu are produced?
Answer:
0.0148 moles
Explanation:
Solid copper is oxidized with HNO₃:
Cu + 4HNO₃ → Cu²⁺ + 2 NO₃⁻ + 2H₂O + 2NO₂
Where 1 mole of Cu produce 1 mole of Cu²⁺ when nitric acid is in excess.
Moles of Cu that react (Molar mass Cu = 63.546g/mol):
0.94g * (1mol / 63.546g) = 0.0148 moles of Cu
And moles of Cu²⁺ produced are also:
0.0148 molesA buffer is prepared by mixing 204.0 mL of 0.452 M HCl and 0.500 L of 0.400 M sodium acetate (NaC2H3O2):
Calculate the pH of the buffer.
How many grams of KOH must be added to 0.500 L of the buffer to change the pH by 0.15 units?
Answer:
pH = 4.89
0.6171g of KOH must be added
Explanation:
Sodium acetate reacts with HCl producing acetic acid as follows:
NaC2H3O2 + HCl → HC2H3O2 + NaCl
That means the moles added of HCl are moles of acetic acid produced and moles of acetate are initial moles - moles of HCl
Moles HCl = Moles acetic acid:
0.204L * (0.452mol / L) = 0.0822 moles acetic acid.
Initial moles sodium acetate:
0.500L * (0.400mol / L) = 0.200 moles
Moles sodium acetate:
0.200 moles - 0.0822 moles = 0.1172 moles sodium acetate
The pH of this buffer (Mixture of a weak acid and its conjugate base) is obtained using H-H equation:
pH = pKa + log [A-] / [HA]
Where pH is pH of the buffer,
pKa is pKa of the buffer (4.74 for acetic acid)
[A-] Moles of sodium acetate -Conjugate base-
And HA moles of acetic acid -Weak acid-
pH = 4.74 + log [0.1172 moles] [0.0822 moles]
pH = 4.89In 0.500L the moles of the buffer are:
0.500L * (0.200moles / 0.704L) = 0.142 moles of buffer
For a pH of 0.15 units more (4.89 + 0.15 = 5.04):
5.04 = 4.74 + log [Acetate] / [Acetic acid]
0.3 = log [Acetate] / [Acetic acid]
1.9953 = [Acetate] / [Acetic acid] (1)
And as:
0.142 = [Acetate] + [Acetic acid] (2)
Replacing (2) in (1):
1.9953 = 0.142 - [Acetic acid] / [Acetic acid]
1.9953 [Acetic acid] = 0.142 - [Acetic acid]
2.9953 [Acetic acid] = 0.142 moles
[Acetic acid] = 0.0474 moles of acetic acid must remain after the addition of KOH.
In the beginning, moles of acetic acid are:
0.0822 moles * (0.500L / 0.704L) = 0.0584 moles.
That means moles added of KOH (Equal to moles of acetic acid that react) are:
0.0584 moles - 0.0474 moles = 0.0110 moles of KOH
In grams (Molar mass KOH = 56.1g/mol):
0.0110 moles KOH * (56.1g/mol) =
0.6171g of KOH must be addedThe specific rotation of (S)-2- butanol is + 13.5. If 1.00 g is dissolved in 10.0 mL of ethanol and placed in a sample cell with a length of 1.00 dm, what observed rotation do you expect?
Answer:
-1.35 degree
Explanation:
Given the specific rotation of (S)-2-butanol = +13.5 degree
So, the specific rotation of its enantiomer (R)-2-butanol = -13.5 degree
Now the optical rotation of a pure liquid is given by
[tex]$\theta = [\alpha]_\lambda ^t.l.d$[/tex]
Here, [tex]$\theta$[/tex] = the optical rotation
[tex]$[\alpha]_\lambda^t$[/tex] = specific rotation at temperature 't' and wave length 'λ'
= -13.5 degree
l = optical path length
= 1 dm
d = density
= 1/10
Therefore,
[tex]$\theta = -13.5 \times 1 \times \frac{1}{10}$[/tex]
= -1.35 degree
The molarity (M) of an aqueous solution containing 22.5 g of sucrose (C12H22O11) in 35.5 mL of solution is ________.
Answer:
1.86 M
Explanation:
From the question given above, the following data were obtained:
Mass of sucrose (C12H22O11) = 22.5 g
Volume of solution = 35.5 mL
Molarity of solution =?
Next, we shall determine the number of mole in 22.5 g of sucrose (C12H22O11). This can be obtained as follow:
Mass of sucrose (C12H22O11) = 22.5 g
Molar mass of C12H22O11 = (12×12) + (22×1) + (16×11)
= 144 + 22 + 176
= 342 g/mol
Mole of C12H22O11 =?
Mole = mass /Molar mass
Mole of C12H22O11 = 22.5 /342
Mole of sucrose (C12H22O11) = 0.066 mole
Next, we shall convert 35.5 mL to litres (L). This can be obtained as follow:
1000 mL = 1 L
Therefore,
35.5 mL = 35.5 mL × 1 L / 1000 mL
35.5 mL = 0.0355 L
Thus, 35.5 mL is equivalent to 0.0355 L.
Finally, we shall determine the molarity of the solution as follow:
Mole of sucrose (C12H22O11) = 0.066 mole
Volume of solution = 0.0355 L.
Molarity of solution =?
Molarity = mole /Volume
Molarity of solution = 0.066/0.0355
Molarity of solution = 1.86 M
Therefore, the molarity of the solution is 1.86 M.
Name something that has zero thermal energy.
Answer:
When all molecules in a system stop moving completely, there is zero thermal energy
Explanation:
It is impossible to reach though
how to covert ethanol into 2-butanol.(show reaction)
Explanation:
Conversion -
Ethanol to 2-butanolCH₃–CH₂–OH → CH₃–CH₂– CH(OH)–CH₃
Explaination -
CH₃–CH₂–OH + HCl → CH₃–CH₂– Cl + H₂O
Now,
CH₃–CH₂– Cl + 2Na + Cl–CH₂–CH₃ → CH₃–CH₂–CH₂–CH₃ + 2NaCl (wurtz reaction)
Now,
CH₃–CH₂–CH₂–CH₃ + Cl₂ → CH₃–CH₂–CH₂–CH₂–Cl + HCl (Halogenation)
Now,
CH₃–CH₂–CH₂–CH₂–Cl + KOH (alc.) → CH₃–CH₂–CH=CH₂ + KCl + H₂O
Now,
CH₃–CH₂–CH=CH₂ + H₂O → CH₃–CH₂–CH(OH)–CH₃ (Hydration of alkene by MR addition rule)
Which of the following has a nonpolar bond? *
02
HCI
NH3
CH4
Answer: CH4
Explanation:
BRAINLESS PLEASE
Answer:
O₂
Explanation:
The example of the compound or the molecule that forms a non-polar bond is oxygen gas.
Oxygen gas has a formula of O₂
Since this is a homonuclear molecule, the two bonding atoms have the same kind of electronegativity. The difference is therefore zero. In such a molecule, there is equal sharing of the electron pair between the atoms and no electrostatic charge on the molecule.How would you synthesize 1-hexanol starting from 1-propanol, incorporating a Grignard reagent in the synthesis?
Answer:
hjhjhjhhhhh
Explanation:
How do you think energy flows in and out of the earth's atmosphere ?
1. Change the following into correct scientific notation.
a) 0.03050 =
b) 0.256 x 10°=
c) 25.005 10 =
Answer:
a) 0.03050 = 3.050 × 10-²
b) 0.256 x 10°= 2.56 × 10-¹
c) 25.005 10 = 2.500510 × 10¹
Explanation:
Scientific notations is a way of making very large or very small numbers more comprehensive or simplified. It involves the use of power of ten (10^). The numbers are represented to the power of ten. The following format is used:
a x 10^b
where; a is a number or decimal number between 1 and 10 i.e less than 10 but greater than 1
b is the power of ten
To write a number in scientific notation,
- we move the decimal point right or left depending on whether we're trying to reduce or increase the number
- we count the number of times the decimal point was moved. This serves as the b in the format above.
For example,
a) 0.03050 = 3.050 × 10-²
The decimal point was moved rightward twice. This caused the ^-2 power.
b) 0.256 x 10°= 2.56 × 10-¹
The decimal point was moved rightward once. This caused the ^-1 power.
c) 25.005 10 = 2.500510 × 10¹
The decimal point was moved leftward once. This caused the ^1 power.
What is the difference between homogeneous and heterogeneous mixtures?
What is 50% of 36?
O 9
O 16
O 18
O 34
Answer:
18
Explanation:
36 times 0.5
Compare and contrast the applications and benefits of circle graphs and bar charts. Explain
Answer:
A circle graph, or a pie chart, is used to visualize information and data. A circle graph is usually used to easily show the results of an investigation in a proportional manner. Bar graphs are used to compare things between different groups or to track changes over time. However, when trying to measure change over time, bar graphs are best when the changes are larger.
Explanation:
In short, bar graphs are better to keep track of data over long periods of time, and circle graphs are better when you are trying to visualize a specific set of data.
Circle graph can be also be called pie chart, which is more widely used. It is usually made up of a circle, divided into parts or pies. In the divided parts, it is used to differentiate between different data.
Bar charts on the other hand are like graphs having both x and y axis. It is used to represent data with respect to the height of the graph. Each data is divided into different smaller parts on the graph.
Example of what they look like is attached below.
First one is bar chart while the second is a circle graph
for more on this, visit: https://brainly.com/question/3661259
If 15.5 mL of 0.225 M aqueous magnesium chloride is added to 37.5 mL of 0.250 M aqueous lead(II) nitrate, then what mass of lead(II) chloride precipitates?A. 0.485 g.B. 0.971 g.C. 1.94 g.D. 3.888 g.E. 5.82 8 g.
Answer:
B. 0.971 g
Explanation:
When MgCl₂(aq) reacts with Pb(NO₃)₂(aq), PbCl₂(s) and Mg(NO₃)₂(aq) are produced:
MgCl₂(aq) + Pb(NO₃)₂(aq) →, PbCl₂(s) + Mg(NO₃)₂(aq)
Thus, we need to find imiting reactant finding moles of each reactant:
Moles MgCl₂:
15.5mL = 0.0155L * (0.225 mol / L) = 3.49x10⁻³ moles
Moles Pb(NO₃)₂:
37.5mL = 0.0375L * (0.250mol / L) = 9.38x10⁻³ moles
As the ratio of the reactants is 1:1, the moles of PbCl₂ are 3.48x10⁻³ moles.
We need to convert thes moles to mass using molar mass of PbCl₂ (278.1g/mol), thus:
3.48x10⁻³ moles * (278.1g/mol) =
0.968g of PbCl₂ are precipitate
Thus, right answer is:
B. 0.971 gA Beer's Law Plot of sample A gives a slope equal to 1.2 M-1cm-1. Calculate molar concentration of this sample at a wavelength of 420 nm and an absorbance reading of 0.23 in a 1 cm cuvette.
Answer:
[tex]0.192\ \text{M}[/tex]
Explanation:
A = Absorbance of solution
E = Molar absorptivity
l = Length of cuvette = 1 cm
c = Concentration of solution
Beer's law is given by
[tex]A=Elc[/tex]
The equation of a straight line is given by
[tex]y=mx+c[/tex]
Comparing the above equations we get
Value on [tex]y[/tex] axis = A = Absorbance of solution = 0.23
[tex]m[/tex] = Slope of line = El = Molar absorptivity multiplied with length = [tex]1.2\times 1\ \text{M}^{-1}[/tex]
[tex]x[/tex] = Value of x axis = c = Concentration of solution
So we get
[tex]c=\dfrac{A}{El}\\\Rightarrow c=\dfrac{0.23}{1.2\times 1}\\\Rightarrow c=0.192\ \text{M}[/tex]
The molar concentration of the sample is [tex]0.192\ \text{M}[/tex]
How does evidence of chemical
reactions indicate that new substances
with different properties are formed?
Answer:
Changes in Properties Changes in properties result when new substances form. For instance, gas production, formation of a precipitate, and a color change are all possible evidence that a chemical reaction has taken place. ... Change in Color A color change can signal that a new substance has formed.
Explanation:
The chemical reaction indicate the formation of new substance by change in nature of original compound and shows chemical changes in the reaction.
What is chemical reaction?Chemical reaction is defined as process in which two or more molecules collide with the proper orientation and enough force to produce a new product.
It is also defined as a procedure in which one or more compounds, known as reactants, are changed into one or more distinct substances, known as products.
There are mainly seven types of reaction.
Synthesis reactionDecomposition reactionDisplacement reactionDouble displacement reactionCombustion reactionRedox reactionAcid-Base reactionThus, the chemical reaction indicate the formation of new substance by change in nature of original compound and shows chemical changes in the reaction.
To learn more about chemical reaction, refer to the link below:
https://brainly.com/question/3461108
#SPJ5
If you had to choose,
Happiness or Power? (Any type of Power)
Answer:
I will choose Happiness, Happiness, Happiness, Happiness.....
☺️❤️
Explanation:
Why Happiness Matters
It's the feeling of truly enjoying your life, and the desire to make the very best of it. Happiness is the "secret sauce" that can help us be and do our best. Here's what researchers found when they studied happy people: Happy people are more successful.
Scientific evidence suggests that being happy may have major benefits for your health. For starters, being happy promotes a healthy lifestyle. It may also help combat stress, boost your immune system, protect your heart and reduce pain. What's more, it may even increase your life expectancy.
PLZ HELP TAKING TEST NOW. WILL GIVE BRAINLIEST
Some students decided to do an experiment with a can of pop. They opened the 340 g can of pop and left it open for a day. They then measured the pop can and found it was 332 g. Does this break the law of conservation of mass? Explain why or why not.
what is the iupac name of CH3-CH2CH(CH3)CH2-COOH
Answer:
Butanoic acid.
Explanation:
net ionic equation of HF(aq)+RbOH(aq)=H2O(l)+RbF(aq)
net ionic equation
H⁺(aq)+OH⁻(aq)⇒H₂O(l)
Further explanationThe electrolyte in the solution produces ions.
The equation of a chemical reaction can be expressed in the equation of the ions
For strong electrolytes (the ionization rate = 1) is written in the form of separate ions, while the weak electrolyte (degree of ionization <1) is still written as an un-ionized molecule
In the ion equation, there is a spectator ion that is the ion which does not react because it is present before and after the reaction
When these ions are removed, the ionic equation is called the net ionic equation
For gases and solids including water (H₂O) can be written as an ionized molecule
So only the dissolved compound is ionized ((expressed in symbol aq)
Reaction
HF(aq)+RbOH(aq)⇒H₂O(l)+RbF(aq)
ionic equation
H⁺(aq)+F⁻(aq)+Rb⁺(aq)+OH⁻(aq)⇒H₂O(l)+Rb⁺(aq)+F⁻(aq)
net ionic equation
H⁺(aq)+OH⁻(aq)⇒H₂O(l)