Answer:
The Liver, Pancreas and Gall Bladder are involved in the process of delivering the digestive juices for the Intestines
Explanation:
1- Three 6-ohms resistors in a series circuit give equivalent resistance of
Answer:
The equivalent resistance of the three resistors is 18 ohms.
Explanation:
The value of three resistors are 6 ohms.
We need to find the equivalent resistance of the resistors. In series combination, the equivalent resistance is given by :
R = R₁ + R₂ + R₃ +.....
Put all the values,
R = 6+6+6
R = 18 ohms
Hence, the equivalent resistance of the three resistors is 18 ohms.
What is the difference between the spectrum of an incandescent solid and the spectrum of an incandescent gas?
Incandescent solids emit bright-line spectra; incandescent gases emit continuous spectra.
Incandescent solids emit one wavelength; incandescent gases emit several wavelengths.
Incandescent solids emit continuous spectra; incandescent gases emit bright-line spectra.
Incandescent solids emit scattered spectra; incandescent gases emit continuous spectra.
Answer:
ncandescent solids emit continuous spectra; incandescent gases emit bright-line spectra.
Explanation:
Materials when heated emit a continuous spectrum with all wavelengths.
Hot gas gases emit a spectrum that depends on the transitions between atomic states, therefore it is a discrete spectrum.
When reviewing the answers, the correct one is:
ncandescent solids emit continuous spectra; incandescent gases emit bright-line spectra.
Determine the mass of fuel required for the expected energy consumption in the United States for the next 10 years:
Provide the energy use per person per year in the United States = 3.5 × 1011 joules.
Base your calculations on a current population of 310,000,000.
Answer:
(This will depend on the type of fuel, I will assume that the fuel is petrol)
First, let's find the expected energy consumption in the US for the next 10 years.
We know that in one year, a person consumes 3.5*10^11 joules.
There are 310,000,00 people on the US
Then the total consumption in one year is:
310,000,000*3.5*10^11 joules = 1.085*10^20 J
In 10 years the consumption is 10 times the consumption of a single year, then the expected energy consumption in the US for the next 10 years is:
10*1.085*10^20 J = 1.085*10^21 J
Now let's find the mass of fuel required.
We know that a liter of petrol has 31,536,000 joules of energy,
And a liter of petrol weights 0.75 kg
To find the number of liters of petrol that we need, we need to find the quotient between the expected energy consumption in the next 10 years and the energy of a single liter of petrol, this is:
N = (1.085*10^20 J)/(31,536,000 j) = 3.44*10^13
We will need 3.44*10^13 liters of petrol.
And the total mass of petrol will be:
M = 3.44*10^13*0.75 kg = 2.58*10^13 kg of fuel.
A.149 kg baseball moving at 17.7 m/s is caught by a 57 kg catcher at rest on an ice skating rink, wearing
frictionless skates. With what speed does the catcher slide on the ice?
Do NOT put in units or it will be marked wrong! The answer's value only! Please round each answer to 3 places.
MaVa + MbVb = (Ma+b)(Va+b)
Answer:
v = 12.8 m/s
Explanation:
Applying the law of conservation of energy:
[tex]m_1u_1+m_2u_2=m_1v_1+m_2v_2[/tex]
where,
m₁ = mass of baseball = 149 kg
m₂ = mass of catcher = 57 kg
u₁ = initial speed of ball = 17.7 m/s
u₂ = initial speed of catcher = 0 m/s
v₁ = v₂ = v = final speed of ball and the final speed of catcher = ?
both are same because ball is in hands of cathcer in the final state.
Therefore,
[tex](149\ kg)(17.7\ m/s)+(57\ kg)(0\ m/s)=(149\ kg)(v)+(57\ kg)(v)\\\\v = \frac{2637.3\ kgm/s}{206\ kg}[/tex]
v = 12.8 m/s
1.) A ball is thrown horizontally from the top of a building. What is the vertical velocity of the ball after 1 second?
A. 0 m/s
B. 9.8 m/s
C. 4.9 m/s
D. 19.6 m/s
2.) This is a required question
What is the horizontal acceleration of a projectile?
A. 0 m/s2
B. 8.9 m/s2
C. 4.9 m/s2
D. 9.8 m/s2
3.) If air resistance is neglected, at what angle a projectile must be projected to attain the maximum range?
A. 40
B. 75
C. 45
D. 90
4.) Neglecting air resistance, the range of a projectile projected at an angle of 20 degrees is the same as that of _______ if they were released with the same velocity.
A. 50
B. 70
C. 60
D. 80
5.) What do you call the motion of an object with constant acceleration?
A. circular motion
B. uniform motion
C. constant motion
D. uniformly accelerated motion
CAN SOMEONE PLEASE HELP ASAP. THANK U
Q.1 - V = u + at
u = 0, a = g = 9.8, t = 1
V = 0+9.8*1 = 9.8 m/s
Q 2- In horizontal position the velocity remains same hence a= dv/t, since change in velocity is zero the acceleration also equal to zero
Q.3- After neglecting the air resistance at 45° angle the maximum range is obtained.
let's prove, consider the range have maximum angle at θ, now range is given by
R = u²Sin2θ/g where sin2θ can we written as 2sinθ.cosθ.
Now the range value is directly proportional to the product of sin & cos of firing angle & this maximum value is obtained at 45°
Q.4 The range of two angle will be same if and only if they give 90° on addition.
20+x = 90,
x = 90-20 = 70°
Q.5 The motion with constant acceleration is known as uniformly accelerated motion.
Thanks for joining brainly community!
Answer:
B. 9.8 m/sA. 0 m/s²C. 45°B. 70°D. uniformly accelerated motionExplanation:
1.
u=0m/s
v=?
a=9.8m/s²
t=1sec
now
we have
v=u+at
v=0+9.8*1
v=9.8m/s
3.
angle is measured in sin and cos angle where maximum angle's value is gained by 45°
4.
we have
range
R=[tex]\frac{u²sin2\theta}{g}[/tex]
For
angle =20°
R1=[tex]\frac{u²sin2*20}{g}[/tex].......[1]
another angle be [tex]\theta[/tex]
R2=[tex]\frac{u²sin2\theta}{g}[/tex].......[2]
since R1=R2
By comparing we get
Sin40=Sin([tex]2\theta[/tex])
Sin(180-40)=Sin([tex]2\theta[/tex])
we
140=[tex]2\theta[/tex]
[tex]\theta[/tex]=70°
The _____is a measure of the number of waves that pass a point in a given amount of time
The bumper cars crash into each other and stop. Explain why both bumper cars stop after the crash. [4marks]
Answer:
The collision is inelastic
Explanation:
There are two kinds of collision; elastic collision and inelastic collision. In an elastic collision, both momentum and kinetic energy are conserved.
However, in an inelastic collision, kinetic energy is not conserved. So, when the bumper of two cars collide, the cars come to a stop because the collision is inelastic.
As an electric current flows through the copper sulfate solution, copper settles on the negative electrode. How will the mass of the copper covering this electrode change if we increase the current by 4 times and halve its flow time?
Answer:
Ține ogaru ca să o lingă pe măta în cur să nu mai facă alt prost ca tine
how can a sound of a different note be produced in a guitar without changing the length of wire?
Answer:
how tightly strung the wire is
-- Make the string tighter or looser.
-- Keep the same length, but make the string thicker or thinner.
-- Touch the string at a point exactly 1/2, 1/3, 1/4, or 1/5 of its length from one end.
Lithium has an atomic number of 3. How many electrons does it have?
A 4
B. 1
C. 2
D. 3
Answer:
it has 3 electrons. brainliest please
What charge does an object have if it has an excess of electrons?
Answer:
negative charge
Explanation:
On an atomic scale, those are called "ions", and negatively charged ions are called anions.
A spring has 100 J of EPE when it is stretched 2 m. What is the spring constant?
A. 100 N/m
B. 50 N/m
C. 200 N/m
D. 150 N/m
Answer:
B: 50 N/m
Explanation:
Hopes it help.
The spring constant of the spring is 50 N/m. The correct option is B.
What is spring potential energy?When the spring is compressed, it gets compressed up to its elastic limit. When load is removed from the spring, it regains its shape and obtains equilibrium position. The energy stored in this process is called as spring potential energy.
Given a spring has 100 J of EPE when it is stretched 2 m. The energy stored in the spring is given by
SPE = ½ kx²
100 = ½ k (2 m)²
k = 50 N/m
So, spring constant of the spring is 50 N/m.
Thus, the correct option is B.
Learn more about spring potential energy.
https://brainly.com/question/12528339
#SPJ2
what is a material used to reduce or prevent the transfer of electricity, heat, or sound ?
Answer:
The material you're looking for is insulation.
Explanation:
It reduces and/or stops electricity waves, heat waves, and sound waves from going past.
What information is represented by the slope of a graph of displacement versus time (displacement-time graph)?
a microwave with a frequency of 5.0 x 10^10 hertz has a period of
Answer:
A microwave with a frequency of 5*10¹⁰ hertz has a period of 2*10⁻¹¹ seconds.
Explanation:
Frequency is the number of vibrations that occur in a unit of time. Its unit is s⁻¹ or hertz (Hz).
The period is the time that elapses between the emission of two consecutive waves. In other words, it is the time it takes for a complete wave to pass a reference point. The period (T) is simply the inverse of the frequency (f):
[tex]T=\frac{1}{f}[/tex]
In this case, f=5*10¹⁰ Hz. So, replacing in the definition of period T:
[tex]T=\frac{1}{5*10^{10} Hz }[/tex]
Solving:
T= 2*10⁻¹¹ seconds
A microwave with a frequency of 5*10¹⁰ hertz has a period of 2*10⁻¹¹ seconds.
A microwave with a frequency of 5*10¹⁰ hertz has a period of 2*10⁻¹¹ seconds.
What is fequency?The fequency is defined as the number of cycles achieved by the any wave it is expressed in hertz.
Frequency is the number of vibrations that occur in a unit of time. Its unit is s⁻¹ or hertz (Hz).
The period is the time that elapses between the emission of two consecutive waves. In other words, it is the time it takes for a complete wave to pass a reference point. The period (T) is simply the inverse of the frequency (f):
[tex]T=\dfrac{1}{f}[/tex]
In this case, f=5*10¹⁰ Hz. So, replacing in the definition of period T:
[tex]T=\dfrac{1}{5\times 10^{10}}=2\times 10^{-11}\ Sec[/tex]
A microwave with a frequency of 5*10¹⁰ hertz has a period of 2*10⁻¹¹ seconds.
Thus a microwave with a frequency of 5*10¹⁰ hertz has a period of 2*10⁻¹¹ seconds.
To know more about Frequency follow
https://brainly.com/question/25699025
A change in state is considered a
A.
Chemical change
B.
Physical Change
C.
Element
D.
Density
[tex]\huge{ \mathfrak{ \underline{Áñswér: }}}[/tex]
A change in state is considered a :
[tex] \hookrightarrow { \mathbb{\: physical \: change}}[/tex]
[tex]\#TeeNForeveR [/tex]
If an external force and the frictional force are acting on a body, which is in rest on the floor and are equal and opposite, then the frictional force is _____
If an external force and the frictional force are acting on a body, which is in rest on the floor and are equal and opposite, then the frictional force is Static friction.
name of impurities present in zinc plate used in simple cell.
Mercury is present in zinc plate which is used in simple cell
Use the image above to answer the following for 2 points each:
1. Identify a point in the diagram where a divergent boundary is occurring and explain how it is interacting with the rock cycle.
2. Identify a point in the diagram where a divergent boundary is occurring and explain how it is interacting with the rock cycle.
3. Identify a point in the diagram where the rock cycle is occurring without a plate boundary and how it is interacting with the rock cycle.
Answer: the divergent one goes where it looks like there a crack because when you think about divergent it means dividing like seperating.(igneous rock) is where the divegent one goes.
the one that is no plate boundary is sedimentary rock and it occurs by because there is nothing there for it todo there
Explanation:
the light beam falls on the surface of the mirror at an angle of 50 ° and is reflected. What is the magnitude of the reflection angle of that fiber?
Answer:
The Magnitude of the angle of reflection equals that of Incidence from the Law of reflection
So its 50°.
Explanation:
Can some one help me with this question its hard :( down below ill give brainliest
Imagine that a 1200 kg vehicle speeds up from rest to 20.0 m/s in 80 m.
How much work was done on the car? (Answer in 3 sig figs)
Correct question:
Imagine that a 1200 kg vehicle speeds up from rest to 20.0 m/s in 80 s.
How much work was done on the car? (Answer in 3 sig figs)
Answer:
the work done on the vehicle is 2.40 x 10⁵ J
Explanation:
Given;
mass of the vehicle, m = 1200 kg
initial velocity of the vehicle, u = 0
final velocity of the vehicle, v = 20 m/s
time of motion of the vehicle, t = 80 s
The distance moved by the vehicle is calculated as;
[tex]s = (\frac{v + u}{2} )t\\\\s = (\frac{20+ 0}{2} )(80)\\\\s = 800 \ m[/tex]
The force applied to the vehicle is calculated as;
[tex]F = ma = \frac{m v}{t} = \frac{1200 \times 20}{80} = 300 \ N\\\\[/tex]
The work done on the vehicle is calculated as;
W = F x d
W = 300 x 800
W = 2.4 x 10⁵ J.
Therefore, the work done on the vehicle is 2.40 x 10⁵ J
Most consumers first spend their disposable income on what
Answer:
They first spend it on necessities.
State one similarity between rotatory and circular motion
Answer:
The main difference between these types of motion is that circular motion is a special case of rotational motion, where the distance between the body’s centre of mass and the axis of rotation remains fixed.
Rotational motion is based around the idea of rotation of a body about its center of mass. In rotational motion, the axis of rotation and centre of mass could change whereas in circular motion, the axis of rotation and centre of mass does not change.
Circular motion is a movement of an object along the circumference of a circle or rotation along a circular path and can either have a constant angular rotation rate and constant speed, or it can exist with a changing rate of rotation.
Think of one of those fairground rides where people sit on dummy horses. Now imagine the horses spin around the post that holds them to the base of the ride. Then you have both rotational motion of the horse and circular motion as the horses move around the ride.
c) Explain the following.
Keftles, cooking pans and iron boxes have polished surfaces
Answer:
Polished surfaces reduce heat loss
How many snowmen do you think this sled can destroy? Explain your answer.
Answer:
342,690
Explanation:
I think, given 342,690 snowmen down a giant hill, that sled could destroy every single snowman :)
A nucleus splits to form two or more smaller nuclei during which process?
A. Positron emission
B. Nuclear fission
C. Nuclear fusion
O D. Gamma decay
Answer:
nuclear fission
over due by alot please help
Answer:
i would say the third one
Explanation:
may i be brainliest?
I would assume its A. or B.
Answer:
B
Explanation:
remember that you are looking for the value of the graph
to take into account or value a lot: prize, estimate to value your opinion. 2nd: estimate or assign the monetary value of: appraise a necklace. b: qualify or scale in utility, importance or general value: evaluate. value.
A bicycle with a mass of 100kg hit a wall at an acceleration of 4 m/s2, what is the force?
Answer:
400N
Explanation:
F= ma
F= 100 x 4
F= 400N