Answer:
Television's use 2 portions of the electromagnet spectrum and that is Visible light and radio waves.
Explanation:
Visible light helps us see the picture on the television and radio waves are used to send pictures to television's screen.
Construction engineering does not have much to do with design.
True
False
Steering and suspension question
Answer:
I would say only A
Explanation:
steering dampeners are applied to heavy-duty and off-road vehicles in order to help stabilize and balance out your steering in rough terrain. luxury cars won't have them because, well, they are cars, and cars are not used for off-roading. trucks and SUVs and sometimes vans are though, which makes sense more than just a random luxury car with dampeners just sitting there for no reason at all when heavy-duty vehicles need them more than the car.
What's the difference between a scale and a scale drawing?
scale is used to make a scale drawing. every scale drawing has it's sclae written for proper interpreatation
What is a scale?
A Scale is the ratio of a sketched model and the actual measuremnts while a scale drawing is a sketched model that was carefully made such that every measurement in the sketch could be represented to the site or actual mearuement through the scale with very little or no error
Read more on scale here: https://brainly.com/question/26467371
To make a scale drawing, scale is used. For correct interpretation, every scale drawing has its own scale inscribed on it.
What exactly is a scale?A scale drawing is a sketched model that has been meticulously prepared so that every measurement in the sketch may be conveyed to the site or actual measurement through the scale with very little or no mistake.
A weighing apparatus or equipment with two pans of equal weight hung from its ends —usually used in the plural, either pan or tray of a balance scale.
Learn more about scale here
brainly.com/question/26467371
#SPJ4
In python
Write an expression that executes the loop body as long as the user enters a non-negative number.
Note: If the submitted code has an infinite loop, the system will stop running the code after a few seconds and report "Program end never reached." The system doesn't print the test case that caused the reported message.
Sample outputs with inputs: 9 5 2 -1
Body
Body
Body
Done.
Answer:
inputed = input("Choose some numbers, each separated with a space: ")
chosen = list(inputed)
chosen = chosen.remove(' ')
for value in chosen:
if '-' not in value:
print(Body)
else:
print(Done)
break
Explanation:
The for loop will go through every value in the list (your numbers) and check if it is positive or negative.
List three examples of waves that can transfer energy without going through a medium
Electromagnetic waves can transfer energy without a material medium.
3 examples of elctromagnetic energy include: Radio wave, X-rays and gamma rays
What is wave?A wave is a disturbance that transfers energy from one point to another.
Electromagnetic waves are waves that does not require a material medium for the tranfer of energy
Radio waveGamma raysX-raysLight waveRead more on Electromagnetic waves here: https://brainly.com/question/13874687
Give two disadvantages of a moving coil Meter
A nuclear ________ reactor heats a liquid to an extremely high temperature in order to power a nuclear rocket. (7 letters)
Answer:
Thermal
Explanation:
There are seven letters in the word "thermal". High temperature would indicate the liquid needs to be at a high heat. Thermal means "heat". Therefore, the answer should be thermal.
Here's what the answer should be: A nuclear thermal reactor heats a liquid to an extremely high temperature in order to power a nuclear rocket.
I hope this helps!
-No one
What is the wavelength of a photon with an energy of 3. 38 x 10^-19 j
The photon has a wavelength of 588 nm
what is a wavelength?Wavelength is the distance between two points along the path of the wave.
it is usually represented by λ
Energy of a photon, E = ( h c ) / λ
where:
h is Planck's constant = 6.626 × 10 -34 Js
c is speed of light = 3.0 * 10^8 m/s
λ = ( h c ) / E
λ = ( ( 6.626 × 10 -34 ) * ( 3.0 * 10^8 ) ) / 3.38 * 10^-19
λ = 5.88 * 10^-7 m
λ = 588 * 10^-9 m = 588 nm
λ = 588 nm = 588 nanometers
Read more on photon here: https://brainly.com/question/15946945
what is the direct current generator
Answer:
A direct-current (DC) generator is a rotating machine that supplies an electrical output with unidirectional voltage and current.
Explanation:
Hope this helps
Damage reports should contain the information needed for what?
Answer:
it's damage kindly be carefulengineering economics
Explanation:
mathematics education grade 7
Based on your understanding of color’s relationship to wavelength, identify the approximate wavelength of light (nm) emitted by strontium when it was burned in Part C. (No quantitative data was collected for this; you are giving an approximate value only, based on what you observed. ) Strontium emission = _________________nm
Explain your reasoning in full, making sure to cite specific data and observations to support your answer.
Q. 5 What would you conclude about chloride based on your results in the flame tests in Part C?
Q. 6 Place the metal solutions you tested in order of increasing energy based on the colors observed in the flame test; i. E. , A < B < C
The approximate emmission of Crimson is 620 to 700 nm
We would have to identify the wavelength that are emitted by the strontium.
In the strontium test, the observations would be based on the flames that are crimson red.
In the color wheel, the color with the highest wavelength is red at 620 to 700 mm.
3. The original color that is present in the test comes from when metal salt is heated. This usually causes its outer electrons to be excited, falling back to different energy wavelength in the spectrum.
Higher wavelength = loosely bound electron in the outer shell so that less energy is required.
The metals are red when they are burnt. The red color is the one with the highest wave length.
What is a wavelength?This is defined as the existing distance that is found between waveds. These could be sound or electromagnetic waves.
Read more on wavelength here: https://brainly.com/question/10728818
Which organization would provide business and leadership training to a high school hospitality student?
Answer:
Future Business Leaders of America
Explanation:
Traveling a average speed at 55mph how many miles will you travel in9 hours
Time left 0:35:32 Three steel rod (E = 200 GPa) supports 36 KN Load P. Each of the rods AB and CD has a 200 mm? cross- sectional area and rod EF has 625 mm2 cross-sectional area. C D Compute for the stress in the rod. AB. a. 15.25 MPa b. 38.10 MPa C 19.05 MPa d. 30.50 MPa
Answer:
tama po ba
Explanation:
correct me if im wrong
on to Hand Tools - Scored Items
Item 11 of 25
When working above the when working above the ground, what should be used to connect all tools to prevent injury to others or damage to the work below?
A lanyard should be used to connect all tools to prevent injury to others or damage to the work below when working above the ground.
What is OSHA?OSHA is an abbreviation for occupational safety and health administration and it is an agency of the federal government that is saddled with the following responsibilities:
Assuring and ensuring safe and healthy working conditions for workers.Setting and enforcing standards, rules, and laws.According to the Occupational Safety and Health Administration (OSHA), a lanyard should be used by workers to connect all tools, so as to prevent injury to other workers or even a damage to the work below, especially when working above the ground.
Read more on OSHA here: brainly.com/question/17199752
10 tasks and 5 exercises. How many ways are there to build the test?
To find how many ways, you must simply multiply 10 tasks and 5 exercises
Ways: = 10 * 5 = 50 ways
Hope that helps!
What is the purpose of networking?
Answer:
The purpose of networking is to make new friends, industry acquaintances, and even business partners.
Metric wire size is measured in units of?
b. Cubic centimeters
a. Meters
c. Square millimeters
d. Cubic millimeters
Answer:
C which is square millimeters which is right.
Which of the following would not be a good reason to use a linear model?
Thank
The disadvantage of using a linear model is that; It is sensitive to outliers and prone to multicollinearity.
What is the Linear Regression Model?Linear regression is defined as a regression technique whereby the independent variable has a linear relationship with the dependent variable.
Now, there are some advantages of this model in statistics such as;
Linear regression performs exceptionally well for linearly separable data.It is easy to implement and interpret.It carries out extrapolation beyond a specific data set.However, there are some disadvantages such as;
It is very sensitive to outliers.
It is prone to having multicollinearity.
It assumes linearity between dependent and independent variables.
Read more about Linear Regression Model at; https://brainly.com/question/17844286
The battery of an aircraft and even your car has the negative
as the ground. The question is why was the negative not the
positive chosen to be the ground?
A platinum resistance temperature detector has a resistance of 100.00 V at 0°C, 138.50 V at 100°C and 175.83 V at 200°C. What will be the nonlinearity error in °C at 100°C if the detector is assumed to have a linear relationship between 0 and 200°C?
Answer:
about 1.54 °C
Explanation:
The error will be the difference between the temperature interpreted from the resistance value and the actual temperature. The linear equation used to translate the resistance reading to temperature will be ...
T = (200 -0)/(175.83 -100.00)(R -100.00)
T ≈ 2.637479(R -100)
At the temperature of 100°C, the resistance value of 138.50 will be interpreted to be a temperature of ...
T = 2.637479(138.50 -100) ≈ 101.543°C
This represents an error of 1.543°C relative to the actual temperature.
What should you do if you encounter a fishing boat while out in your vessel?.
Answer:
if you encounter fishing or hunting boats while you are paddling, be courteous.
Give them a wide berth.
Never run overfishing lines. Be aware that anglers may have lines out to the sides of their boat or trolling behind them.
Explanation:
does advanced auto parts install engine air filter
Answer:
You have to do it yourself.
Explanation:
The steel bracket is used to connect the ends of two cables. if the allowable normal stress for the steel is sallow = 30 ksi, determine the largest tensile force p that can be applied to the cables. assume the bracket is a rod having a diameter of 1.5 in.
The largest tensile force that can be applied to the cables given a rod with diameter 1.5 is 2013.15lb
The static equilibrium is given as:
F = P (Normal force)
Formula for moment at section
M = P(4 + 1.5/2)
= 4.75p
Solve for the cross sectional area
Area = [tex]\frac{\pi d^{2} }{4}[/tex]
d = 1.5
[tex]\frac{\pi *1.5^{2} }{4}[/tex]
= 1.767 inches²
Solve for inertia
[tex]\frac{\pi *0.75^4}{4}[/tex]
= 0.2485inches⁴
Solve for the tensile force from here
[tex]\frac{F}{A} +\frac{Mc}{I}[/tex]
30x10³ = [tex]\frac{P}{1.767} +\frac{4.75p*0.75}{0.2485} \\\\[/tex]
30000 = 14.902 p
divide through by 14.902
2013.15 = P
The largest tensile force that can be applied to the cables given a rod with diameter 1.5 is 2013.15lb
Read more on tensile force here: https://brainly.com/question/25748369
Grapes, sour
Red, elbow
what is you're question :)
Answer:
Explanation:
what is the question
The sounds heard during the first phase of blood-pressure measurement are called.
The sounds heard during the first phase of blood-pressure measurement are called the Korotkoff sounds.
What sounds are heard during blood pressure?The kind of sound that is bern heard during blood pressure is Korotkoff sounds which are produced underneath the distal half of the blood pressure cuff.
The sounds can be noticed when cuff pressures are between systolic and diastolic blood pressure.
Learn more about sounds at;
https://brainly.com/question/25871632
Suppose a manager of a certain mining company wants to determine the weekly food expenditure of the company’s employees. if there are 2,549 employees and the manager decided to use only 500 employees as a sample, who will be included in the sample? to help the manager make his decision, suggest a sampling technique to be used and state the whole process of selecting the participants
The sampling technique that can be used to selecting the participants will be a random sampling.
What is sampling?It should be noted that sampling simply a method in statistical analysis that predetermined observations are taken from the population.
In this case, the sampling technique that can be used to selecting the participants will be a random sampling. This is need to give everyone an equal chance of being selected.
Learn more about sampling on:
https://brainly.com/question/17831271
Might a synchronous motor equally well be called a synchronous inductor
In Engineering, a synchronous motor is sometimes referred to as synchronous capacitor but not a synchronous inductor.
What is a synchronous motor?A synchronous motor can be defined as an alternating current (AC) electric motor in which the rotation speed of the shaft is directly proportional to the frequency of the supply current, especially at steady state.
Basically, a synchronous motor is sometimes referred to as a synchronous capacitor because it can be used to correct the power factor (PF) of a lagging load such as an induction motor.
However, a synchronous motor cannot be called a synchronous inductor because the rotation speed of the shaft is not proportional to the synchronous speed of the motor. Thus, they are called an synchronous motor.
Read more on synchronous motor here: https://brainly.com/question/12975042
Which tool should an analyst in engineering design for the given scenario?
Answer:
What are some types of analysis that an engineer could use to test a design? (Possible answers may relate to: mathematical calculations; testing of stress, loads or function; or computer-aided analysis.)
hope it helps you..✌️
Answer:
[tex]{\large{\pink{ \overline{ \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: }}}}{}\ _{ \red{ \heartsuit}} [/tex]