Why do we need to build models of molecules to study atomic composition?

Answer:

I could be wrong but i believe the answer is D. It was not B when i took the test

Explanation:

Phenol can form hydrogen bonds with water since it contains O-H group but nitrobenzene can not form hydrogen bonds with water.

Polar molecules tend to be soluble in water. The greater the dipole moment, the greater the polarity of the compound. We can see that  Nitrobenzene has a dipole moment of 4.2 x 10-9 esu cm while phenol has a dipole moment of 1.7 x 10-8 esu cm.

Now, It is confusing to observe that the solubility of Nitrobenzene  in water is far less than that of phenol despite its higher dipole moment. The reason for this observation is that, phenol can form hydrogen bonds with water since it contains O-H group but nitrobenzene can not form hydrogen bonds with water.

Therefore, phenol is more soluble in pure water as a solvent compared to nitorbenzene.

Learn more: https://brainly.com/question/967776

A is the petal and b is the leaf. I think.

Answer:

what is meaning of this.

Answer:

On April 30, 1789, George Washington, standing on the balcony of Federal Hall on Wall Street in New York, took his oath of office as the first President of the United States.

Answer:

C8H12

Explanation:

First find the molar mass

195/1.8 × 1 = 108.3 gmol-1

Then the molecular formula

Mass of C in 1 mole of compound = 88.82×108.3/100

= 96.2 g

Mass of H in 1 mol of.the compound = 108.3×11.18/100 = 12.11 g

Divide the mass by their molar masses to get no. of moles in 108.3 g of compound or 1 mole of compound

Moles of C in one Mole of compound = 96.2g/12 gmol-1 = 8 mol

Moles of H in 1 mole of compound = 12.11g/1 gmol-1 =12 mol

Since we need the molecular formula it's C8H12

Answer:

The answer for number one is .A

The answer for number two is heat rises

Explanation:

sure i can help

so u have to ask someone else

Answer:

78.125ml

Explanation:

Number of moles in 250ml of 2.5M KCl is (250÷1000)litres×2.5M so we divide these moles by 8M. The answer gotten will be in litres so multiply by 1000 to get it in ml

Answer:

Hey mate.....

Explanation:

This is ur answer....

Hope it helps!

Brainliest pls!

Follow me! :D

Answer:

Soil acidity can be corrected easily by liming the soil, or adding basic materials to neutralize the acid present. ... As lime dissolves in the soil, calcium (Ca) moves to the surface of soil particles, replacing the acidity. The acidity reacts with the carbonate (CO3) to form carbon dioxide (CO2) and water (H2O).

Explanation:

Answer:

2 MOLES OF GLUCOSE

Explanation:

How many Moles of glucose are produced from 12 moles of CO2 in photosynthesis?

6CO2 +6H20-------------->C6H12O6 -+ 6O20

(IN THE PRESENCE OF CHLOROPHYLL AND UV FROM )

)

6 MOLES OF CO2 MAKE 1 MOLE OF GLUCOSE

12 MOLES THEN MAKE 2 MOLES OF GLUCOSE

In the photosynthesis process, plants can use 12 moles of carbon dioxide to form 2 moles of glucose.

It is the process by which green plants and some other organisms convert light energy into chemical energy.

Let's consider the balanced equation for the synthesis of glucose through photosynthesis.

6 CO₂ + 6 H₂O ⇒ C₆H₁₂O₆ + 6 O₂

The molar ratio of CO₂ to C₆H₁₂O₆ is 6:1. The moles of glucose formed from 12 moles of carbon dioxide are:

12 mol CO₂  (1 mol C₆H₁₂O₆/6 mol CO₂) = 2 mol C₆H₁₂O₆

In the photosynthesis process, plants can use 12 moles of carbon dioxide to form 2 moles of glucose.

Learn more about photosynthesis here: https://brainly.com/question/3529377

I think u asked for the atoms of sulfur? its 4..

Explanation:

calcium = 4

sulfur = 4

oxygen = 4

I hope this is correct

The electrostatic forces between molecules of glycerin are the strongest.

We have 4 compounds with their respective boiling points.

The boiling point is the temperature at which a substance passes from the liquid state to the gaseous state.

A high boiling point indicates that the intermolecular forces are strong, so more energy is needed to separate the molecules in the vaporization.

Thus, glycerin, with the highest boiling point, is expected to have the strongest electrostatic forces between their molecules.

The electrostatic forces between molecules of glycerin are the strongest.

Learn more: https://brainly.com/question/2153588

Answer:

Glycerin

Explanation:

Answer:

Explanation:

First Question:

Melting is a physical process that involves the phase transition of a substance from its solid to its liquid state. Burning, on the other hand, is a chemical process that involves a substance being broken down and changed into different substances. It's still the same substance, though: water.

Second Question:

Mass is therefore never conserved because a little of it turns into energy (or a little energy turns into mass) in every reaction. But mass+energy is always conserved. Energy cannot be created out of anything.

Answer:

Sodium bicarbonate is an antacid used to relieve heartburn and acid indigestion. Your doctor also may prescribe sodium bicarbonate to make your blood or urine less acidic in certain conditions. This medication is sometimes prescribed for other uses; ask your doctor or pharmacist for more information.

Answer:

option C 5

hope this answer helps you dear! take care

Answer:

5, the coefficient is the number right before the variable. The ² and ³ (even though Mines on top and yours is on the bottom) are not coefficient because. . . well it just doesn't make sense.

Fats and oils are used throughout the world for both food applications and industrial uses. They are consumed in butter, shortening, margarine, salad oils, and cooking oils, as well as in animal feeds, fatty acids, soaps, personal care products, biodiesel, paints (made from alkyd resins), lubricants, and greases.

Answer:

D

Explanation:

Copper has a more positive reduction potential than Hydrogen and is below Hydrogen in the reactivity series. So it can't displace H+ from diluted acids. Therefore Cu doesn't form Cu salt and a gas

Fe, Zn and Mg are above Hydrogen in the electrochemical series and can displace Hydrogen as follows

Fe(s) + 2HCl(aq) ----> FeCl2 +H2 (g)

Mg(s) + 2HCl(aq) ----> MgCl2 (aq) +H2 (g)

So iii is wrong

Zn(s) +2HCl(aq) ----> ZnCl2(aq) +H2 (g)

Answer:

Diamond is covalently bonded and has a giant covalent structure. Covalent bonds require lots of energy to break as they are strong so diamond has the highest melting point. Iodine has only weak intermolecular forces (instantaneous dipole-dipole interactions or London forces) whereas hydrogen fluoride has a permanent dipole and can hydrogen bond (as well as having London forces).

Explanation:

hope to help

Answer:

B. C6H1206(s) + 602(9) → 6H20(l) + 6C02(9)

Explanation:

You can see that it's balanced;

C6H1206(s) + 602(g)           →            6H20(l) + 6C02(g)

 C  ⇒ 6                                                        C ⇒ 6

 H  ⇒ 12                                                       H ⇒ 6 x 2 = 12

 O  ⇒ 6 + (6 x 2) = 18                                  O ⇒ 6 + (6 x 2) = 18

Answer:

i k ow its not the exact anwser but ih ope this helps

Explanation:

Energy plays a key role in chemical processes. According to the modern view of chemical reactions, bonds between atoms in the reactants must be broken, and the atoms or pieces of molecules are reassembled into products by forming new bonds. Energy is absorbed to break bonds, and energy is evolved as bonds are made. In some reactions the energy required to break bonds is larger than the energy evolved on making new bonds, and the net result is the absorption of energy. Such a reaction is said to be endothermic if the energy is in the form of heat. The opposite of endothermic is exothermic; in an exothermic reaction, energy as heat is evolved. The more general terms exoergic (energy evolved) and endoergic (energy required) are used when forms of energy other than heat are involved.

A great many common reactions are exothermic. The formation of compounds from the constituent elements is almost always exothermic. Formation of water from molecular hydrogen and oxygen and the formation of a metal oxide such as calcium oxide (CaO) from calcium metal and oxygen gas are examples. Among widely recognizable exothermic reactions is the combustion of fuels (such as the reaction of methane with oxygen mentioned previously).

Answer:

MgCO 3 is an inorganic salt with chemical name Magnesium Carbonate. It is also called Magnesite or Hydromagnesite or Barringtonite. Hydrated forms of magnesite such as di, tri, tetrahydrates are present as minerals. It acts as a fertilizer and as an antacid.

Explanation:

Fusion processes require fuel and a confined environment with sufficient temperature, pressure, and confinement time to create a plasma in which fusion can occur. The combination of these figures that results in a power-producing system is known as the Lawson criterion. In stars, the most common fuel is hydrogen, and gravity provides extremely long confinement times that reach the conditions needed for fusion energy production. Proposed fusion reactors generally use hydrogen isotopes such as deuterium and tritium (and especially a mixture of the two), which react more easily than hydrogen to allow them to reach the Lawson criterion requirements with less extreme conditions. Most designs aim to heat their fuel to around 100 million degrees, which presents a major challenge in producing a successful design.

As a source of power, nuclear fusion is expected to have many advantages over fission. These include reduced radioactivity in operation and little high-level nuclear waste, ample fuel supplies, and increased safety. However, the necessary combination of temperature, pressure, and duration has proven to be difficult to produce in a practical and economical manner. Research into fusion reactors began in the 1940s, but to date, no design has produced more fusion power output than the electrical power input.[1] A second issue that affects common reactions is managing neutrons that are released during the reaction, which over time degrade many common materials used within the reaction chamber.

Fusion researchers have investigated various confinement concepts. The early emphasis was on three main systems: z-pinch, stellarator, and magnetic mirror. The current leading designs are the tokamak and inertial confinement (ICF) by laser. Both designs are under research at very large scales, most notably the ITER tokamak in

Answer: adduction of the arm

lateral rotation of the arm

Explanation:

Answer:

1 would be the answer

protons = atomic # I think

Answer:

hydrogen

Explanation:

hydrogen has the atomic number of 1 which means that hydrogen has one proton and is neutral so it has one electron as well.

machine called a centrifuge spins your blood to separate your red blood cells, platelets and plasma. As the blood is separated, the heavier reds cells sink to the bottom and are given back to you.

Answer:

they physical quantities that are uneffected by changes to a vector space basis

Answer:

it down their!!!!!!!!!!1

Explanation:

The new volume  

=

23.2

L