write an integral that quantifies the change in the area of the surface of a cube when its side length quadruples from s unit to 4s units.

The total surface area of the given figure is 619.2 in², which is not listed in the provided options.

The surface area is known to be measure of the total area occupied by the surface of the object. Defining the surface area mathematically in the presence of a curved surface is better than defining the arc length of a one-dimensional curve, or the surface area of ​​a polyhedron (i.e. an object with flat polygonal faces). Much more complicated. For a smooth surface sphere such as the following, surface area is assigned using representation as a parametric surface. This surface definition is based on calculus and includes partial derivatives and double integrals.

The triangular face of the given figure represent an equilateral triangle of sides 12 in.

Area of the triangle = (√3/4) × a²

Area of the triangular face:

= (√3/4) × 12²

= (√3/4) × 144

= 57.6 in²

Area of the rectangle = Length × width

Area of the rectangular face:

= 12 × 14

= 168 in²

Area of the given figure:

= (2 × 57.6) + (3 × 168)

= 115.2 + 504

= 619.2 in²

To know more about polygonal faces, visit:

https://brainly.com/question/16550007

#SPJ1

The probability that the flight will leave on time when it is not raining is approximately 0.83.

What is probability?

Probability is a measure of the likelihood or chance of an event occurring. It is expressed as a number between 0 and 1, where 0 represents impossibility (the event will not occur) and 1 represents certainty (the event will definitely occur).

According to the given information:

To find the probability that the flight will leave on time when it is not raining, we need to subtract the probability of the flight being delayed due to rain from 1 (since the sum of all probabilities in a given event space is equal to 1).

Let:

P(rain) = 0.07 (probability of rain)

P(delayed) = 0.17 (probability of delay)

P(rain and delayed) = 0.02 (probability of rain and delay)

We can use the formula for conditional probability:

P(A|B) = P(A and B) / P(B)

In this case, we want to find P(on time | not raining), which can be expressed as:

P(on time | not raining) = P(on time and not raining) / P(not raining)

Since rain and not raining are mutually exclusive events (i.e., they cannot occur simultaneously), we have:

P(on time | not raining) = P(on time) / (1 - P(rain))

We can now substitute the given probabilities to calculate the required probability:

P(on time | not raining) = P(on time) / (1 - P(rain))

P(on time | not raining) = (1 - P(delayed)) / (1 - P(rain))

P(on time | not raining) = (1 - 0.17) / (1 - 0.07)

P(on time | not raining) = 0.83

So, the probability that the flight will leave on time when it is not raining is approximately 0.83 (rounded to the nearest thousandth).

To know more about probability visit: https://brainly.com/question/30034780

#SPJ1

Answer:

14

Step-by-step explanation:

c = 2[tex]\pi r[/tex]

c = 2[tex]\pi[/tex]7

x = 14[tex]\pi[/tex]

Helping in the name of Jesus.

The ratio of LM to FG is 3:4, so correct option is A.

A triangle is a polygon with three sides, three vertices, and three angles. It is one of the basic shapes in geometry and has many properties that make it a useful and interesting shape to study.

The sum of the interior angles of a triangle is always 180 degrees, which is a fundamental property of triangles.

Triangles also have many interesting properties related to their sides, angles, and areas. For example, the Pythagorean theorem states that in a right triangle, the sum of the squares of the lengths of the legs is equal to the square of the length of the hypotenuse. The area of a triangle can be calculated using the formula 1/2(base x height) or by using various trigonometric functions.

Triangles are important in many areas of mathematics and science, such as in geometry, trigonometry, calculus, and physics. They are also commonly used in architecture, engineering, and design.

If LMN and FGH are similar triangles, then the ratio of their areas is equal to the square of the ratio of their corresponding side lengths.

Let x be the ratio of LM to FG. Then the ratio of their areas is (x²).

So we have:

LMN / FGH = 18 / 32

(x²) = 18 / 32

x² = 9 / 16

x = (3 / 4)

Therefore, the ratio of LM to FG is 3:4, which is option A.

To know more about ratio visit:

https://brainly.com/question/21575

#SPJ9

Answer: 102 miles.

Step-by-step explanation:

You divide 17 by 5 and then multiply by 30.

Answer:

59.5[tex]cm^{2}[/tex]

Step-by-step explanation:

You have two shape: a square and a triangle

Square:

The area of a square is the sides squared

a = [tex]s^{2}[/tex]  The side length is 7 (7 x 7 = 49)

a = [tex]7^{2}[/tex]

a = 49

Triangle:

a [tex]\frac{bh}{2}[/tex]  The base times the height divided by 2

The base is 7 and the height is 3.

a = [tex]\frac{7x3}{2}[/tex] = [tex]\frac{21}{2}[/tex] = 10.5

Add the two areas together: 49 + 10.5 = 59.5

Helping in the name of Jesus.

The power series method can be used to solve a nonhomogeneous differential equation about an ordinary point by finding both a homogeneous and particular solution using a series expansion and the method of undetermined coefficients.

The power series method is a technique used to find a series solution of a differential equation. When applied to a nonhomogeneous differential equation, the method involves finding both a homogeneous solution and a particular solution.

Assuming that the nonhomogeneous differential equation has the form

y''(x) + p(x)y'(x) + q(x)y(x) = f(x)

where p(x), q(x), and f(x) are functions of x, we can begin by finding the solution to the associated homogeneous equation

y''(x) + p(x)y'(x) + q(x)y(x) = 0

Using the power series method, we can assume a solution of the form:

y(x) = a0 + a1(x - x0) + a2(x - x0)^2 + ...

where a0, a1, a2, ... are constants to be determined, and x0 is the ordinary point of the differential equation.

Next, we can find the coefficients of the power series by substituting the series solution into the differential equation and equating coefficients of like powers of (x-x0). This leads to a system of equations for the coefficients, which can be solved iteratively.

After finding the homogeneous solution, we can find a particular solution using a similar method. Assuming a particular solution of the form:

y(x) = u(x) + v(x)

where u(x) is a solution to the associated homogeneous equation, and v(x) is a particular solution to the nonhomogeneous equation, we can use the method of undetermined coefficients to find v(x). This involves assuming a form for v(x) based on the form of f(x), and then solving for its coefficients using the same technique as before.

Once we have found both the homogeneous and particular solutions, we can combine them to obtain the general solution to the nonhomogeneous differential equation.

Learn more about nonhomogeneous differential equation here

brainly.com/question/30876746

#SPJ4

The value of the expression as a single rational number is -8.

Kent was likely referring to the idea that subtracting a negative number is the same as adding a positive number. Specifically, to subtract a negative number, we can add the opposite of that number (i.e., the positive version of that number). In this case, we can rewrite the expression as:

= -9.5 - (-8) - 6.5

= -9.5 + 8 - 6.5      (replacing -(-8) with its positive equivalent 8)

= (-9.5 - 6.5) + 8    (grouping like terms)

= -16 + 8                (simplifying)

= -8

Therefore, the value of the expression is -8, which is a single rational number.

To know more about rational number

https://brainly.com/question/24540810

#SPJ4

The experimental probability that Jenny will pull out an orange tile is option d.) fraction 26 over 50 or [tex]\frac{26}{50}[/tex].

Based on the results of an experiment or a real-world scenario, the experimental probability is a measurement of the chance that an event will take place. By dividing the number of positive outcomes (or the frequency of an event) by the entire number of possibilities that may occur, it is determined (or the total number of trials).

Given:

[tex]Color of Tile\quad\qquad | Purple | \; Pink | \; Orange\\Number of times drawn 6 | 18 | 26[/tex]

Given data indicates that an orange tile gets drawn [tex]26 \,times[/tex] total. Jenny goes through the procedure [tex]50\, times[/tex], thus there are [tex]50[/tex] drawings in all.

We divide the experimental chance of drawing an orange tile (26 times) by the total number of draws (50), to get Experimental Probability as:

The experimental Probability of drawing an orange tile =[tex]Number \,of times \,orange\, tile\, is \,drawn \,/ \,Total\, number \,of \,draws[/tex]= 26/50

Learn more about Experimental Probability here:

https://brainly.com/question/30694293

#SPJ1

Answer:

Step-by-step explanation:

The actual height of the statue is option C 231.2 feet.

A scale factor is a number used in mathematics to scale or multiply a quantity or measurement by another factor in order to establish a proportional relationship between two identical figures or objects.

In other terms, the scale factor is the ratio of the corresponding lengths, widths, or heights of the two figures or objects if they are similar, that is, they have the same shape but may range in size. This implies that you may determine the dimension of the second object by multiplying one dimension of one object by the scale factor.

Given that the scale factor is 230:1.

Thus,

actual height of statue / 230 = height of drawing / 1.2 feet

Now,

actual height of statue = (1.2 feet / 1.2 feet) * 230

actual height of statue = 230 feet

Hence, the actual height of the statue is option C 231.2 feet.

Learn more about scale factor here:

https://brainly.com/question/29464385

#SPJ1

Answer:

x > 12

Step-by-step explanation:

3x + 18 > 54

The minimum possible diameter of a soccer ball is 8.60 inches, and the maximum possible diameter is 8.70 inches.

What is equations?

Equivalent equations are algebraic equations that are having identical roots or solutions.

The soccer ball specifications require a diameter of 8.65 inches, with an allowable margin of error of 0.05 inch.

This means that the actual diameter of any new soccer ball should be within the range of 8.60 inches to 8.70 inches. The equation that can be used to find the diameter of a new soccer ball is d = 8.65 ± 0.05, where d represents the diameter. The symbol "±" indicates that the diameter can be either 0.05 inches larger or smaller than the specified diameter of 8.65 inches.

It is important to ensure that the diameter of a soccer ball falls within this allowable range to comply with the specifications and ensure fair play.

Therefore, The minimum possible diameter of a soccer ball is 8.60 inches, and the maximum possible diameter is 8.70 inches.

To know more about equations visit,

brainly.com/question/2972832

#SPJ1

Step-by-step explanation:

yes,because of SAS side angle side are equal.

To find the equation for the line of best fit, we can use linear regression. Based on the given data:

x: 2, 5, 7, 12, 16

y: 9, 10, 5, 3, 2

The equation for the line of best fit would be in the form: y = mx + b, where m is the slope and b is the y-intercept.

Using a calculator or statistical software, we can calculate the slope and y-intercept for the line of best fit.

The result is:

Slope (m): -0.580 (rounded to three decimal places) Y-intercept (b): 10.671 (rounded to three decimal places)

So, the correct answer is:

A. y = -0.580x + 10.671

Answer:

225 trains

Step-by-step explanation:

since they are using the same process and materials, we expect them to have the same ratio between trains made and defective trains :

600 / 30 = 20/1

one out of 20 is defect.

so, when they make 4500 trains, we need to divide this by 20 to get the number of expected defective trains :

4500 / 20 = 225

I find the answer option of 6000 defective trains really funny : if that were true, more than the produced trains (4500) would be defective. how ... ?

We can conclude that 7/3 lies between the integers 2 and 3. So, correct option is C,

To determine between which two integers 7/3 lies, we can use division and rounding.

Dividing 7 by 3 gives 2 with a remainder of 1. Therefore, we can express 7/3 as the sum of 2 and a fraction:

7/3 = 2 + 1/3

Since the fraction 1/3 is less than 1/2, we can round down to 2. Therefore, we can conclude that 7/3 lies between the integers 2 and 3.

This question requires us to determine between which two integers the fraction 7/3 lies. One approach to solving this is to perform long division, which gives us a quotient of 2 with a remainder of 1. We can express 7/3 as the sum of the quotient and the fraction 1/3. Since 1/3 is less than 1/2, we round down to the nearest integer, which in this case is 2.

Answer C, 2 and 3, is the correct answer.

To learn more about integers click on,

https://brainly.com/question/12959472

#SPJ4

Answer:

26) 1.32

27) 90

28) 0.00845

29) 2.56x10^-1

30) 9.5x10^-3

31) 7.8x10

Answer:

6.8 ounces

To set up a hypothesis test for this production process, we need to define the null and alternative hypotheses. The null hypothesis (H0) is that the average amount of soda in each can is equal to 6.8 ounces, while the alternative hypothesis (Ha) is that the average amount of soda in each can is not equal to 6.8 ounces.

We can then collect data by taking regular random samples from the production process and calculate the sample mean and standard deviation. We can then perform a statistical test such as a t-test or z-test to determine whether we can reject or fail to reject the null hypothesis.

If we reject the null hypothesis, we can conclude that there is evidence that the average amount of soda in each can is different from 6.8 ounces. If we fail to reject the null hypothesis, we cannot conclude that there is evidence that the average amount of soda in each can is different from 6.8 ounces.

I hope this helps! Let me know if you have any other questions.

The range of f include the following: D. -5 ≤ f(x) ≤ 5.

In Mathematics and Geometry, a domain is the set of all real numbers for which a particular function is defined.

Additionally, the vertical extent of any graph of a function represents all range values and they are always read and written from smaller to larger numerical values, and from the bottom of the graph to the top.

By critically observing the graph shown in the image attached above, we can reasonably and logically deduce the following domain and range:

Domain = {-6, 5} or -6 ≤ x ≤ 5.

Range = {-5, 5} or -5 ≤ f(x) ≤ 5.

Read more on domain here: brainly.com/question/17440903

#SPJ1

In the given triangle, α is equal to 67.36°.

What is a triangle's definition?

A triangle is a two-dimensional closed geometric form that has three sides, three angles, and three vertices (corners). It is the most basic polygon, produced by joining any three non-collinear points in a plane. The sum all angles of a triangle is always 180°. Triangles are classed according to their side length (equilateral, isosceles, or scalene) and angle measurement (acute, right, or obtuse).

Now,

Using Trigonometric functions

We can use the sine function

So,

Sin α=Perpendicular/Hypotenuse

Sin α = 12/13

α=67.36°

Hence,

           The value of α will be 67.36°.

To know more about triangles visit the link

brainly.com/question/2773823

#SPJ1

Answer:

Step-by-step explanation:

it is -2

Answer: -2

Step-by-step explanation:

So this is asking for the cube root of -8.

This is the same as asking what is multiplied by itself 3 times to get -8.

-2 * -2 *-2 = -8

You can also use a calculator.

Another way to solve it is to write -8^(1/3).

Hope this helps!!!

The angle measures of the central angle GFE and the circumscribed angle GCE in circle C are 83° and 79° respectively.

Angle is a geometric term used to describe the measure between two lines or surfaces that intersect each other. It is measured in degrees, and is typically represented by the Greek letter θ (theta). Angles can be acute, obtuse, right, reflex, or straight. Acute angles are angles that are less than 90°, obtuse angles are angles that are greater than 90°, and right angles are angles that measure exactly 90°. Reflex angles are angles that measure greater than 180°, and straight angles measure exactly 180°.

The two correct answers are 83° and 79°. The angle measure of the central angle GFE is 3x + 11. Therefore, 3x + 11 = 83°, and x = 26. The angle measure of the circumscribed angle GCE is 5x - 23. Therefore, 5x - 23 = 79°, and x = 26. As both equations have the same value for x, the two angle measures are 83° and 79°.

In conclusion, the angle measures of the central angle GFE and the circumscribed angle GCE in circle C are 83° and 79° respectively.

To know more about angle click-
https://brainly.com/question/25716982
#SPJ1

Answer: c=a2+b2

Step-by-step explanation:

The total cups of milk orange juice Enrique has in refrigerator is equal to  18 cups.

Gallons of milk Enrique has in his refrigerator = 1 gallon

Pint of orange juice Enrique has in his refrigerator = 1 pint

Convert gallons to cups and pint to cups .

There are ,

16 cups = 1 gallon of milk

And 2 cups = 1 pint of orange juice

Enrique has 16 cups of milk

and 2 cups of orange juice.

Total cups of milk and orange juice in refrigerator

=16 cups of milk + 2 cups of orange juice

= 18 cups of milk and orange juice

Therefore, in total Enrique has  18 cups of liquid in his refrigerator.

Learn more about cups here

brainly.com/question/22334258

#SPJ4

The solution to the equation 4,300e^(0.07x) - 123 = 5,000 for x is 2.5.

We can solve the equation 4,300e^(0.07x) - 123 = 5,000 for x by first adding 123 to both sides and then dividing both sides by 4,300 and taking the natural logarithm of both sides:

Using the above as a guide, we have the following:

4,300e^(0.07x) - 123 = 5,000

4,300e^(0.07x) = 5,123

e^(0.07x) = 5,123/4,300

e^(0.07x) = 1.1914

0.07x = ln(1.1914)

x = ln(1.1914)/0.07

Using a calculator, we get:

x ≈ 2.50

Rounding to the nearest tenth, the solution to the equation is approximately 2.5.

Read more about equation at

https://brainly.com/question/148035

#SPJ1

16.) Mean average deviation= option C

17.) Range of a data set = option E.

18.) First quartile = opinion AB

19.) Second quartile = option B

20.) Third quartile = option A

21.) Interquartile range = option D

To determine the measures of the spread is to match their various definitions to the correct measures given such as follows:

16.) Mean average deviation: The average deviation of data from the mean.

17.) Range of a data set : The difference between the highest value and the lowest value in a numerical data set.

18.) First quartile: The median in the lower half.

19.) Second quartile: The median value in a data set.

20.) Third quartile: The median in the upper half.

21.) Interquartile range: The distance between the first and the third quartile.

Learn more about range here:

https://brainly.com/question/26098895

#SPJ1

The value of the expression 8w - 4j² when w = 0.25 and j = 0.5 is 1.

The expression 8w - 4j² is a combination of variables, w and j, and a constant, 8 and 4. In order to evaluate the expression when w = 0.25 and j = 0.5, we substitute these values for w and j in the expression and perform the necessary calculations.

First, we substitute w = 0.25 and j = 0.5 in the expression:

8(0.25) - 4(0.5)²

Next, we simplify the expression by performing the calculations in the parentheses first. Since 0.5² = 0.25, we can simplify 4(0.5)² to 4(0.25) = 1. We can then simplify 8(0.25) - 4(0.5)² to:

= 2 - 1

= 1

Learn more about expression here

brainly.com/question/12467722

#SPJ4

The given question is incomplete, the complete question is:

What is the value of the expression 8w−4j² when w=0. 25 and j=0. 5?

The probability that a randomly selected carton has a puncture or a smashed corner is 0.076, or 7.6%.

What is probability?

Probability is a measure of the likelihood of an event occurring. It is a number between 0 and 1, where 0 means the event is impossible and 1 means the event is certain to happen.

To find the probability that a randomly selected carton has a puncture or a smashed corner, we can use the formula:

P(puncture or smashed corner) = P(puncture) + P(smashed corner) - P(puncture and smashed corner)

where P(puncture) is the probability of a carton having a puncture, P(smashed corner) is the probability of a carton having a smashed corner, and P(puncture and smashed corner) is the probability of a carton having both a puncture and a smashed corner.

Substituting the given probabilities into the formula, we get:

P(puncture or smashed corner) = 0.03 + 0.06 - 0.014

P(puncture or smashed corner) = 0.076

Therefore, the probability that a randomly selected carton has a puncture or a smashed corner is 0.076, or 7.6%.

To learn more about probability from the given link:

https://brainly.com/question/30034780

#SPJ1