Answer:
QED, EDQ, DQE, EQD, DEQ, QDE
Explanation:
The structure of all possible peptides that contain the given amino acids are :
QED, EDQ, DQE, EQD, DEQ, QDE
where : Asp is represented by the letter code D
Glu is represented by the letter code E
Gln is represented by the letter code Q
Note : when three amino acids combine they form what is known as tripeptide ( i.e. contains two peptide linkages ) while a peptide linkage is been formed by the combination of a carboxyl group of an amino acid and the amino group of different amino acid
What is the initial and final mass of the zinc and copper?
Answer:the final mass of copper is 3.84 g. There was an increase in mass of 1.84 g from the initial mass of 2.0 g.
Explanation:
Which of the compounds shown are structural
isomers of this compound? Check all that apply.
A
B
С
D
Answer:
A & C
Explanation:
The next one is A Edge 2022
The compound which are the structural isomers of the given compound is compound A & C.
What are structural isomers?Structural isomers are those isomers in which which are having the same molecular formula but different structural structures.
Compound A: A is the structural isomer of the given compound as they both have same number of carbon and hydrogen atoms present in that.Compound B: B is not the structural isomer of the given ompound as they have not equal number of carbon and hydrogen atoms in it.Compound C: C is the structural isomer of the given compound as they both have same number of carbon and hydrogen atoms present in that.Compound D: D is not the structural isomer of the given ompound as they have not equal number of carbon and hydrogen atoms in it.Hence A & C are the structural isomers of given compound.
To know more about structural isomers, visit the below link:
https://brainly.com/question/26298707
According to the kinetic molecular theory which substances are made of particles ?
Answer:
The kinetic molecular theory of matter states that: Matter is made up of particles that are constantly moving. All particles have energy, but the energy varies depending on the temperature the sample of matter is in. This in turn determines whether the substance exists in the solid, liquid, or gaseous state.
Explanation:
Kinetic molecular theory explains the properties of solids, liquids and gases. As per this theory, matter is made of particles.
What is kinetic theory?
Kinetic molecular theory explains the properties of different states of matter. According to this theory matter is made up of particles. But the theory is mostly applies for gases.
According to kinetic theory of gases, gaseous substances consists of tiny spherical particles which are located apart from each other and hence no intermolecular force acts between them. They are in random motion and gains kinetic energy.
The kinetic energy of particles are temperature dependant and it increase as temperature rises. The collision between the particles and the particle and wall of the container in which they are will be elastic collision.
These concepts are applicable only for ideal gases. An less applicable for other states of matter.
To find more kinetic theory, refer here:
https://brainly.com/question/15357425
#SPJ6
What happens to iron when it melts?
O A. It undergoes a chemical change.
O B. It undergoes a physical change.
O c. Its atoms break apart and form new atoms.
O D. Its atoms combine and form new atoms.
Answer:
B. It undergoes a physical change.
Explanation:
Hello there!
In this case, since we know that chemical changes lead to the formation of new atoms and/or compounds due to the bonds rearrangement of the initial substances and the physical changes occur without changing the composition of the initial substances, we can infer that, since melting is a process that changes the phase of matter from solid to liquid without changing the identity of the initial substance, the answer to this question would be B. It undergoes a physical change. because the other options describe chemical changes.
Best regards!
Answer:
B. It undergoes a physical change.
Explanation:
At room temperature, the iron atoms are in an unusual loosely packed open arrangement; as iron is heated past 912 degrees Celsius, the atoms become more closely packed before loosening again at 1,394 degrees Celsius and ultimately melting at 1,538 degrees Celsius.
How many grams water will condense when 56,500 joules of energy is removed from steam at its boiling point
Answer:
Start your streak by answering any question. You'll get bonus points from day 2.
help me with questions 6,11,15,16 and 17 please
ayúdame con las preguntas 6,11,15,16 y 17 por favor
What are the substances that interact to form new substances in a chemical reaction called?
A. Reactants
B. Products
C. Chemicals
D. Substances
Answer:
A. Reactants
Explanation:
A chemical reaction is the process in which atoms present in the starting substances rearrange to give new chemical combinations present in the substances formed by the reaction. These starting substances of a chemical reaction are called the reactants, and the new substances that result are called the products.
Jim makes a mixture which contains 10 mg of salt, 30 mg of sand, and some iron filings. The total mass of the mixture is 100 mg
Which amount of iron filings does Jim use in the mixture?
A10
B30
C40
D60
Answer:
Amount of iron fillings in mixture = 60 mg
Explanation:
Given:
Total mass of mixture = 100 mg
Amount of salt in mixture = 10 mg
Amount of sand in mixture = 30 mg
Find:
Amount of iron fillings in mixture
Computation:
Using Law of Conservation of mass;
Total mass of mixture = Amount of salt in mixture + Amount of sand in mixture + Amount of iron fillings in mixture
100 = 10 + 30 + Amount of iron fillings in mixture
100 = 40 + Amount of iron fillings in mixture
Amount of iron fillings in mixture = 100 - 40
Amount of iron fillings in mixture = 60 mg
PLEASE HELP!! NO LINKS PLEASE REAL ANSWER!!!!!
What will be volume of 20.0 g of CH4 gas at a pressure of 0.950 atm and temperature of 21.0 oc?Question 1 options:
A. 21.8 L
B. 31.8 L
C. 2.27 L
D. 4.27 L
What is the mass, in grams, of a piece of aluminum if its temperature changes from 25.0 ºC to 31.5 ºC when it absorbs 42.2 joules of energy? The specific heat for aluminum is 0.89J/gºC
Answer:
m = 7.29 grams
Explanation:
Given that,
Initial temperature, T₁ = 25ºC
Final temperature, T₂ = 31.5ºC
The specific heat of the metal is 0.89 J/gºC.
We know that the heat released due to the change in temperature is given by :
[tex]Q=mc\Delta T\\\\m=\dfrac{Q}{c\Delta T}\\\\m=\dfrac{42.2 }{0.89\times (31.5-25)}\\\\m=7.29\ g[/tex]
So, the mass of the piece is equal to 7.29 grams.
2+4 help please i will fail 6th grade
Answer:
6
Explanation:
lol
Which best describes the total mass of substances before and after a
combustion reaction?
A. The mass is the same because atoms are not created or
destroyed.
B. The mass is greater after the reaction because the number of
atoms increases.
C. The mass is the same because the molecules do not change.
D. The mass is less after the reaction because gases are produced.
Answer:
B. The mass is greater after the reaction because the number of
atoms increases.
Solid AgCl (Ksp = 1.8 X 10-10) is placed in a beaker of water. After a period of time, the Ag+ concentration is measured and found to be 2.5 X 10-7 M.
a) What is the concentration of Cl-?
b) Has the system reached equilibrium?
c) Will more AgCl dissolve?
Explanation:
a)
[tex]k _{sp} = [Ag {}^{ + } ][Cl {}^{ - } ] \\ but \: [Ag {}^{ + } ] = [Cl {}^{ - } ] \\ k _{sp} = [Ag {}^{ + } ] {}^{2} \\ [Ag {}^{ + } ] = \sqrt{k _{sp}} \\ = \sqrt{1.8 \times {10}^{ - 10} } \\ = 1.34 \times {10}^{ - 5} mol {dm}^{ - 3} [/tex]
b)
It has not reached equilibrium because the silver concentration is not yet equal to the value of Ksp.
c)
Yes it will dissolve in order to establish the equilibrium.
can someone answer this
Given the reaction: N2(g) +2O2(g) ⇌ 2NO2(g) The forward reaction is endothermic. Determine which of the following changes would result in more product being produced.
I. Increase NO2
II. Decrease O2
III. Add a catalyst
IV. Increase the temperature
V. Increase the pressure
A. I and II
B. II, III, and V
C. IV and V
D. II and IV
Answer:
C
Explanation:
increasing the temperature will favour the forward reaction therefore the reaction system will try to counteract that by producing more heat and NO2 therefore increases the amount of products produced
increasing the pressure will favour the forward reaction as it has more moles of substance therefore if the forward reaction is favored, more product will be produced
Answer:
C.) lV and V
Explanation:
I got it correct on founders edtell
PLEASE HELP REAL ANSWER NO FILE. Part A
Electricity generated from any source comes with its own advantages and
disadvantages. So, no source of energy for generating electricity is perfect. However,
imagine that there is an energy source that perfectly meets the needs of society.
Describe this ideal source of energy. Include relevant factors such as cost, supply, safety,
reliability, and environmental impact
Answer:
Wind energy
Explanation:
An ideal source of energy needs to be reliable, cost effective, safe and must lead to almost zero adverse environmental impact.
Wind energy is energy obtained from air moving at high velocity. This energy is harvested using windmills which convert mechanical energy to electrical energy.
Wind is inexpensive because it occurs naturally. However, a large expanse of land is required in order to mount sufficient number of windmills that will generate enough electrical energy for practical purposes.
This method of electricity generation is safe and does not lead to any environmental hazard unlike the burning of fossil fuels, use of nuclear energy or loss of habitat due to hydroelectric power generation.
Suppose you needed to explain the concept of the mole to a junior high school student. What would you tell them?
Answer:
Explanation:
duehgjvcujhyeq bvckjfdsaeb gjdksghUIBGREQWMNHGTRE BAGTFEQA
hydrogen chloride, hydrogen nitrate (v), sodium chloride, sodium hydroxide. Name a substance known as common salt
Answer:
C: Sodium chloride
Explanation:
Common salt is gotten when sodium atoms reacts with chlorine atoms in an exothermic reaction to form an ionic substance known as sodium chloride with the chemical formula NaCl.
Equation is;
2Na + Cl2 = 2NaCl
Looking at the options, the correct one is Sodium chloride.
A cylindrical rod of copper (E = 110 GPa) having a yield strength of 240 MPa is to be subjected
to a load of 6660 N. If the length of the rod is 380 mm, what must be the diameter to allow an
elongation of 0.50 mm?
Answer:
required diameter is 7.65 mm
Explanation:
Given the data in the question;
F = 6660 N
l₀ = 380 mm = 0.38 m
E = 110 GPa = 110 × 10⁹ N/m²
Δl = 0.50 mm = 0.0005 m
So, lets assume the deformation is elastic;
d₀ = √( [4l₀F] / [πEΔl] )
we substitute
d₀ = √( [4 × 0.38 × 6660] / [π × (110 × 10⁹) × 0.0005]] )
d₀ = √( 10123.2 / 172787595.947 )
d₀ = √( 5.85875 × 10⁻⁵ )
d₀ = 0.007654 m
d₀ = ( 0.007654 × 1000 )mm
d₀ = 7.65 mm
Therefore, required diameter is 7.65 mm
One method of increasing the chances of particles colliding during a reaction is to...
1)decrease temperature
2) decrease concentration
3)increasing concentration
4)use a catalyst
Answer:
3
Explanation:
Increasing concentration
please help- science
1. - new
2. full
3. first quarter
4. last quarter
Answer:
2. Full
Explanation:
A lunar eclipse occurs at a full moon when Earth is directly between the moon and the sun. During a lunar eclipse, Earth blocks sunlight from reaching the moon.
Hope this helps!!
Read about reverse osmosis and multistage flash distillation .Then identify at least three advantages and three
disadvantages for each process
Answer:
Meaning, Advantages & Disadvantages of - Osmosis, Multiflash Distillatiob
Explanation:
Osmosis is movement of solvent (like water) through semi permeable membrane (like living cell) into solution of higher solute concentration.Advantages - It assists equalising concentration of solute on two sides of membrane. Reverse Osmosis is used for efficient water softening, it is easy to maintain.
Disadvantages - It needs a lot of energy. A lot of pressure is required for deionisation. Water acidity level increases, as minerals get deionised.
Multistage flash distillation refers to desalination water distilling seawater, by flashing water portions in steams in various stages of concurrent heat exchangers.Advantages - Its Cost efficient , distillation uses waste heat. It has High gain output ratio. Quality of feedwater is less significant, compared to reverse osmosis.
Disadvantages - It has high operating cost in case of waste heat unavailability. High temperature imply high corrosion & scale formation.
What is [H⁺] in a 0.330 M solution of acrylic acid, CH₂CHCOOH (Ka = 3.16 × 10⁻⁵)?
Answer:
[H⁺] = 3.23x10⁻³ M
Explanation:
For a weak monoprotic acid, such as acrylic acid, we can calculate [H⁺] using the following formula if the solution concentration is significantly higher than the Ka:
[H⁺] = √(C * Ka)Where C is the weak acid concentration.
We input the data:
[H⁺] = [tex]\sqrt{0.330 M * 3.16x10^{-5}}[/tex]And solve for [H⁺]:
[H⁺] = 3.23x10⁻³ Mwhat is the percent composition of calcium fluoride
Answer:
78.07
Explanation:
them seperatly is
Calcium Ca 51.333%
Fluorine F 48.667%
why do we have to write the background of the study
Answer:
Writing down background information can help you to remember what you learned and can be used for notes in the future when taking an assessment.
Explanation:
Can I get brainliest? It's for a challenge
A helium-filled balloon contains 0.16 mol He at 101 kPa and a temperature of 23°C. What is
the volume of the gas in the balloon?
V = 3.9 L
Explanation:
Given:
T = 23°C + 273 = 296K
n = 0.16 mol He
P = 101 kPa = 0.997 atm
R = universal gas constant = 0.08205 L-atm/mol-K
V = ?
Using the ideal gas law,
PV = nRT
V = nRT/P
= (0.16 mil He)(0.08205 L-atm/mol-K)(296K)/(0.997 atm)
= 3.9 L
What locations are likely to be affected by an earthquake or tsunami?
San Francisco, California, USA
San Francisco, Tokyo, and Asunción
Tokyo, Japan
None of the locations
Asunción, Paraguay, South America
Answer:
All the locations can suffer earthquakes and a handful like tokyo tsunami so the question is either or so the anwer would be all
Explanation:
A certain reaction has an activation energy of 51.02 kJ/mol. At what Kelvin temperature will the reaction proceed 4.50 times faster than it did at 365 K
Answer:
[tex]T_2=400.73K[/tex]
Explanation:
From the question we are told that:
Activation energy [tex]E_a= 51.02 kJ/mol.=>51.02*10^3J/mol[/tex]
Reaction Ratio [tex]\triangle K=4.50[/tex]
Initial Temperature [tex]T_1=365K[/tex]
Generally the equation for Final Temperature [tex]T_2[/tex] is mathematically given by
[tex]log \triangle K=\frac{E_a}{2.303R}*(\frac{T_2-T_1}{T_1T_2})[/tex]
Where
[tex]R=Gas constant[/tex]
[tex]R =8.3143[/tex]
Therefore
[tex]log 4.50=\frac{51.2*10^3}{2.303*8.31432}*(\frac{T_2-365}{365*T_2})[/tex]
[tex]log 4.50=7.328*\frac{T_2-365}{T_2}[/tex]
[tex]0.0892=\frac{T_2-365}{T_2}[/tex]
[tex]0.0892T_2=T_2-365[/tex]
[tex]365=T_2-0.0892T_2[/tex]
[tex]365=0.91T_2[/tex]
[tex]T_2=\frac{365}{0.91}[/tex]
[tex]T_2=400.73K[/tex]
Help solve the types of chemical reactions
[tex]1) \: decomposition[/tex]
[tex]2) \:hydrocarbon \: combustion[/tex]
[tex]3) \: formation[/tex]
[tex]4) \: double - replacement[/tex]
[tex]5 \: double - replacement[/tex]
[tex]6) \: formation[/tex]
[tex]7)double \: - replacement[/tex]
[tex]8) \: double - replacement[/tex]
How many moles of Oxygen atoms are contained in 45.9 mol CO2?
Answer:
Explanation:
10 moles of oxygen atoms.\ \textbf{b)} 91.8 moles of oxygen at