your friend is binging half of a crate of popsicles to the picnic. of you put what is left in the crate evenly into 6 ice buckets, what fraction of the crate will go into each of ice bucket​

For all given Quadrilaterals none has enough information provided in the problem to definitively say - if they are a parallelogram.Hence, option E is correct for all.

If a quadrilateral is a parallelogram, it satisfies the following properties:

It is important to note that in order to definitively conclude that a quadrilateral is a parallelogram, all four properties must be satisfied. If only one or some of the properties are met, it does not necessarily guarantee that the quadrilateral is a parallelogram.

Figure 1-: Adjacent angles are 105 and 75 degrees, which satify the condition of opposite angles being equal but except this no other information is provided, Hence, we don't have enough information to say figure 1 is a parallelogram.

Figure 2-: Diagonals bisect each other and make angle 65 degree with each other. Given that Diagonal 1 bisects Diagonal 2 and the opposite sides of the quadrilateral are equal, by using SAS criterion, the congruency of triangles formed by the diagonals can be derived to say that the opposite angles of the quadrilateral are also equal . However, we still need more information about parallelism of sides to definitively say given quadrilateral is a parallelogram.

Figure 3-: One pair of opposite side is equal in length ,while other pair of line is parallel to each other.This information is insufficient to determine if given quadrilateral is a parallelogram.

Learn more about parallelogram here:

https://brainly.com/question/29147156

#SPJ1

Answer:

-6/7

Step-by-step explanation:

The bigger engine is larger than the smaller one by 235.4724 cubic centimeters.

We know that 1 inch=2.54 centimeters

Then 1 cubic inches-(2.54)^3 cubic centimeters

We have that:

⇒ 1 cubic inches=(2.54)3 = 16.3870 cubic centimeters

⇒350 cubic inches= 350 x 16.3870 = 5735.4724 cubic centimeters

Since, the other displaces 5,500 cubic centimeters  and 5735.4724< 5500. The difference between them is:

= 5735.4724 - 5500

= 235.4724

Hence, the bigger engine larger than the smaller one by 235.4724 cubic centimeters.

Read more about Engine size

brainly.com/question/14439953

#SPJ1

The measure of the angle m∠FGH is 83°.

Since the measure of an angle formed by a two tangents drawn from a point outside the circle is one-half the the difference of the intercepted arcs.

Thus, we can say:

m∠FGH = 1/2 * (∠FIH - 97°)

∠FIH = 360 - 97 = 263° (sum of angle in a circle)

m∠FGH = 1/2 * (263 - 97°)

m∠FGH =  1/2 * 166

m∠FGH = 83°

Learn more about arcs on:

https://brainly.com/question/31152916

#SPJ1

The value of function k(f(x)) is 12x³ + 32x - 8.

Function composition is a way to combine two or more functions to form a new function. In this case, we are given two functions f(x) and k(x), and we need to find the value of k(f(x)), which means we need to apply the function k(x) to the output of the function f(x).

Here we have

Functions f(x)= 3x³ +8x -2 and k(x) = 4x

To find k(f(x)), we need to substitute the expression for f(x) into k(x) wherever we see x. So, we have:

k(f(x)) = 4(f(x)) = 4(3x³ + 8x - 2)

We can simplify this expression by distributing the 4:

k(f(x)) = 12x³ + 32x - 8

Therefore,

The value of function k(f(x)) is 12x³ + 32x - 8.

Learn more about Functions at

https://brainly.com/question/23972305

#SPJ1

a) Any value outside of Q1 - 1.5(IQR) and Q3 + 1.5(IQR) can be considered a potential outlier.

b) This will give us a visual representation of the distribution of income among the full-time students.

c) It is important to analyze outliers carefully to ensure that they are not artificially skewing the results of our analysis.

(a) To check for outliers in the data set, we can use the box-and-whisker plot or the z-score method. However, since we do not have the exact data, we cannot use these methods. One way to identify potential outliers is to calculate the quartiles (Q1, Q2, and Q3) and the interquartile range (IQR).

(b) To draw a histogram of the data, we can use the frequency distribution table given in the question. The x-axis should represent the income ranges (e.g. $0-$100, $100-$200, etc.) and the y-axis should represent the frequency (i.e. the number of students who earned income within each range).

(c) If there are any outliers in the data set, we need to investigate them further to determine the reason for their unusual values. Possible reasons for outliers could be data entry errors, extreme values due to high- or low-income jobs, or unique situations such as unexpected windfalls or emergencies.

To learn more about frequency distribution visit;

https://brainly.com/question/14926605

#SPJ11

Answer:

5x

6xy

2x3y

hope it's helpful

The output of the LTI system with frequency response function [tex]h(w) = 1/(jw^3)[/tex], given an input[tex]x(t)[/tex], is:

[tex]y(t)[/tex]= inverse Fourier transform of [tex][1/(jw^3) X(w)][/tex]

To compute the output of an LTI system with frequency response function [tex]h(w) = 1/(jw^3)[/tex], given an input x(t), we can use the Fourier transform:

[tex]H(w)[/tex] = Fourier transform of [tex]h(t)[/tex]

[tex]X(w)[/tex] = Fourier transform of [tex]x(t)[/tex]

[tex]Y(w) = H(w) X(w)[/tex]

[tex]Y(w)[/tex] is the Fourier transform of the output [tex]y(t)[/tex].

Using the given frequency response function, we have:

[tex]H(w) = 1/(jw^3)[/tex]

Taking the Fourier transform of the input [tex]x(t)[/tex], we have:

[tex]X(w)[/tex] = Fourier transform of [tex]x(t)[/tex]

And multiplying [tex]H(w)[/tex] and[tex]X(w)[/tex], we get:

[tex]Y(w) = H(w) X(w) = 1/(jw^3) X(w)[/tex]

Taking the inverse Fourier transform of [tex]Y(w)[/tex], we get the output [tex]y(t)[/tex]:

[tex]y(t)[/tex] = inverse Fourier transform of [tex]Y(w)[/tex]

For similar questions on frequency

https://brainly.com/question/30466268

#SPJ11

The sample mean for 100 pell grant recipients is more likely to be within $80 of $2,600 for State A, given the relatively smaller population size and the use of the t-distribution.

To compare the two states, we need to calculate the probability of the sample mean for 100 pell grant recipients being within $80 of $2,600 for each state.

For State A, with only 4,000 pell grant recipients, the sample size of 100 is relatively large, but not enough to use the normal distribution. Therefore, we need to use the t-distribution, which has fatter tails than the normal distribution, making it more likely to produce extreme values. This means that the probability of the sample mean for 100 pell grant recipients being within $80 of $2,600 is higher for State A than for State B.

For State B, with a larger population of 200,000 pell grant recipients, the sample size of 100 is a small fraction of the population, allowing us to use the normal distribution. However, as the distribution is narrower than the t-distribution, the probability of the sample mean for 100 pell grant recipients being within $80 of $2,600 is lower for State B than for State A.

You can learn more about sample mean at: brainly.com/question/14127076

#SPJ11

Answer:

The amplitude is 1/2, the period is 2π/4 = π/2, and the phase shift is π/2.

Step-by-step explanation:

The given function is:

f(t) = -1/2(4t - 2π)

We can rewrite this function in the form:

f(t) = A cos(B(t - C)) + D

where A is the amplitude, B is the period, C is the phase shift, and D is the vertical shift.

Comparing this with the given function, we can see that:

A = 1/2

B = 4

C = π/2

D = 0

Therefore, the amplitude is 1/2, the period is 2π/4 = π/2, and the phase shift is π/2.

Note that the negative sign in front of the function does not affect the amplitude, period, or phase shift. It simply reflects the function across the x-axis.

Answer:

$21.28

Step-by-step explanation:

We Know

Dylan bought 3 identical shirts online for a total cost of $71.83

$7.99 for shipping

We have the equation:

71.83 = 3s + 7.99

63.84 = 3s

s = $21.28

So, each shirt cost $21.28

Answer:x= -67 over 24

Step-by-step explanation:

The height of the pyramid whose volume is already given would be = 1,440,000 ft

To calculate the height of the pyramid, the formula of the Volume of the pyramid should be used.

Volume = 1/3lwh

where l = base length = 8h-30 ft= 3.75 ft

w = base width= 8h+20 ft = -2.5 ft

h = h ft

The volume of the pyramid = 4,500,000 cubic feet

4,500,000 = 1/3 × (3.75)(-2.5)h

Make h the subject of formula;

h = 4500000×3/3.75×(-2.5)

h = 13500000/9.375

h = 1,440,000 ft.

Learn more about pyramid here:

https://brainly.com/question/30517561

#SPJ1

Answer:

$481

Step-by-step explanation:

37×$17=$481

he made $481

From the figures, AB is a tangent to the C because they make a right angles (90⁰)

Recall that in n Euclidean plane geometry, a tangent line to a circle is a line that touches the circle at exactly one point, never entering the circle's interior. Tangent lines to circles form the subject of several theorems, and play an important role in many geometrical constructions and proofs.

We shall be determining the angle at C to see if it gives 90⁰

Using trigonometrical ratios of tangent

TanB = Opposite/Adjacent

Tan B. = 4.8/7.2

Tan B = 0.6667

B = Tan⁻¹0.6667

<B = 33.69⁰

Also in the same manner,

TanS = opp/Adj

Tan S = 7.2/4.8

Tan S = 1.5

S = Tan⁺¹1.5

< S = 56.31⁰

Npw <S + <B = 56.32 + 33.69 = 89.9999247 = 90⁰

Therefore AB makes tangent at C

20.  

Tan C = Opp/Adj

Tan C = 15/11.2

Tan C = 1.3393

C = Tan⁺¹1.3393

< C = 53.25

Also, Tan B = 11.2/15

Tan B = 0.7467

B = 36.75

<B + <C = 36.75 + 53.25 = 89.9986 = 90⁰

Therefore AB makes a tangent at C

Learn more about tangent of angles on https://brainly.com/question/10053881

#SPJ1

The measures of center and variability that would be most appropriate to describe the given distribution is D) Median and IQR.

The middle value in a set of data is represented by the median, a measure of central tendency. It is the value that, when a dataset's values are ranked from lowest to highest, distinguishes the lower from the upper half of the dataset.

The middle 50% of a dataset's interquartile range (IQR) is a measure of variability that captures this dispersion. It is the difference between the data's first (Q1) and third (Q3) quartiles. The number that divides the lowest 25% of the data from the remaining data is known as the first quartile, and the value that separates the highest 25% of the data from the remaining data is known as the third quartile.

Learn more about median here:

https://brainly.com/question/28060453

#SPJ1

The complete question is:

The correct answer is (c) 1.9

To calculate the test statistic in this example, we can use the formula for a z-test for proportions:

[tex]z = (p - P) / \sqrt{[P(1-P) / n][/tex]

where:

p is the sample proportion of vegetarians (140/1000 = 0.14)

P is the hypothesized population proportion of vegetarians (0.12)

n is the sample size (1000)

Substituting these values into the formula, we get:

[tex]z = (0.14 - 0.12) / \sqrt{[0.12(1-0.12) / 1000][/tex]

z = 0.02 / 0.0110

z = 1.818 (rounded to three decimal places)

Therefore, the test statistic in this example will be approximately equal to 1.818. The answer closest to this value is (c) 1.9

Learn more about test statistic

brainly.com/question/14128303

#SPJ11

Answer: 94 square inches 2

Step-by-step explanation:

2×(5×4 + 5×3 + 4×3) = 94 sq in 2

length x width x height

if you need more help with your ixl I am free to help!

have a good day!

The value of a for which the solution of the inequality is all real numbers is a = 5.

We have to first simplify the inequality:

A(x + 3) < 5x + 15 - x

Ax + 3A < 4x + 15

Ax - 4x < 15 - 3A

Simplifying further:

x(A - 4) < 15 - 3A

Now, we need the inequality to hold for all real values of x. This means that the coefficient of x, (A - 4), must have a fixed sign, and that the right-hand side, 15 - 3A, must be unbounded.

For the coefficient of x to have a fixed sign, we need either A - 4 < 0 or A - 4 > 0. This means that A must be less than 4 or greater than 4.

For the right-hand side to be unbounded, we need 15 - 3A to be equal to positive or negative infinity. Since 15 - 3A is a linear function of A, this only occurs when A = 5.

So, the solution to the inequality for all real numbers is:

if A < 4, then the solution is x < (15 - 3A) / (4 - A)

if A > 5, then the solution is x > (15 - 3A) / (4 - A)

if A = 5, then the solution is all real numbers.

To know more about inequality

https://brainly.com/question/30231190

#SPJ4

Answer: A. 5,220,000 songs were downloaded in the year 2020.

Step-by-step explanation: The interpretation of s(2020) = 5,220,000 is that in the year 2020, 5,220,000 songs were downloaded. The function s(d) represents the number of songs downloaded in a year d, so plugging in 2020 for d gives us the specific number of songs downloaded in that year.

Step-by-step explanation:

18-2x<3(2x-1)-3

21-2x<6x-3

24<8x

3<x

Interval notation

(3, ∞)

Answer: 4545 yards

Step-by-step explanation:

We can use similar triangles to solve this problem. Let's represent the height of the flagpole with the variable "x".

Using the triangle formed by Carla's line of sight, the height of the apartment building, and the top of the flagpole, we can set up the following proportion:

x / (x + 1515) = 15 / 20

Simplifying this proportion, we get:

4x = 3(x + 1515)

4x = 3x + 4545

x = 4545

Therefore, the height of the flagpole is 4545 yards.

As likely as not (assuming the bag contains an equal number of magnets for each letter in the alphabet).

Probability is a measure of the likelihood or chance that a particular event will occur. It is expressed as a number between 0 and 1, with 0 indicating that the event is impossible and 1 indicating that the event is certain to occur.

In probability theory, the probability of an event is calculated by dividing the number of ways that the event can occur by the total number of possible outcomes. This is known as the probability formula:

probability = Number of favorable outcomes / Total number of possible outcomes

Probability is used in a wide range of fields, including statistics, finance, physics, and engineering, to model and analyze uncertain situations and make predictions.

B. Likely (assuming the bag contains an equal number of magnets for each letter in the alphabet, and that there are more consonants than vowels in the alphabet).

C. Unlikely (assuming the deck contains an equal number of red and black cards).

D. Impossible (assuming the deck contains only standard playing cards with 52 cards, including 13 cards for each of the four suits).

E. Unlikely (assuming the deck contains only standard playing cards with 52 cards, including 4 cards for each number or face value).

To learn more about probability, visit

https://brainly.com/question/30034780

#SPJ1

"It can vary - it really depends on the distribution of the variable."

The number of intervals, or bins, to choose when creating a histogram can vary depending on the distribution of the variable.

Most often, about 8-10 intervals are used, but there is no set rule. It is generally recommended to have at least 5 intervals, but if the data is highly skewed or has outliers, more intervals may be needed to accurately represent the distribution.

Ultimately, the goal is to choose a number of intervals that provides a clear visual representation of the data without oversimplifying or overcomplicating the histogram.

The number of intervals or bins to be chosen when creating a histogram can vary and it really depends on the distribution of the variable.

While most often, about 8-10 bins are used, there is no hard and fast rule for the number of bins to be used in a histogram.

In general, the number of bins should be large enough to display the shape of the distribution clearly, but not so large that it obscures important features of the distribution or leads to overfitting.

A minimum of 5 bins is recommended to display the basic shape of the distribution, but more bins may be necessary for complex or multi-modal distributions.

Depending on the distribution of the variable, a histogram's number of intervals or bins can be altered.

There is no established guideline, however 8–10 intervals are typically utilized.

A minimum of five intervals are often advised, however if the data is extremely skewed or contains outliers, more intervals could be required to correctly depict the distribution.

For similar questions on variable.

https://brainly.com/question/27894163

#SPJ11

The critical value used to test if there is evidence of an effect due to blocks at the 5% level of significance is 10.76.

The critical value can be determined using a statistical table.

The degrees of freedom for the blocks is 4 (df_b = 5 - 1 = 4) and for the treatments is 2 (df_t = 3 - 1 = 2).

The critical value for a 5% level of significance is 10.76.

This value can be found in the statistical table given in the textbook.

The critical value used to test if there is evidence of an effect due to blocks at the 5% level of significance can be calculated by using the F-test statistic.

The F-test is used to compare the variance between the blocks (SSBL) and the variance between the groups (SSB).

The F statistic is calculated by dividing the variance between the blocks (SSBL) by the variance between the groups (SSB).

In this case,

The F statistic is 3738/1048.93 = 3.56.

The critical value for a 5% level of significance can be found using a statistical table.

According to the table,

The critical value for an F statistic of 3.56 with four degrees of freedom in the numerator and four degrees of freedom in the denominator is 10.76

For similar question on critical value:

https://brainly.com/question/30168469

#SPJ11

Point A = (5,4). If you rotated A 90 degrees about the point (2,-1), the coordinates of A' is (-1,2).

Rotation is the process of rotating an object or a point around a fixed point or axis. In mathematics, rotation refers to a transformation that preserves the size and shape of an object while changing its orientation. It is a basic geometric transformation that is used in various fields, including mathematics, physics, engineering, and computer graphics.

In a two-dimensional space, a rotation is typically described by an angle of rotation and a fixed point, which is known as the center of rotation. The angle of rotation represents the amount by which the object is rotated, while the center of rotation is the point around which the object is rotated. In a three-dimensional space, a rotation is described by an axis of rotation and an angle of rotation.

To rotate point A 90 degrees counterclockwise about the point (2,-1), we can use the following formula:

A' = (x', y') = (a + (x - a) cosθ - (y - b) sinθ, b + (x - a) sinθ + (y - b) cosθ)

where (a,b) is the center of rotation and θ is the angle of rotation (90 degrees in this case).

Substituting the given values, we get:

a = 2, b = -1, x = 5, y = 4, θ = 90 degrees

x' = 2 + (5 - 2) cos(90) - (4 + 1) sin(90) = 2 - 3 = -1

y' = -1 + (5 - 2) sin(90) + (4 + 1) cos(90) = -1 + 3 = 2

Therefore, the coordinates of A' are (-1, 2).

To know more about coordinates visit:

https://brainly.com/question/18596983

#SPJ9

[tex]\textit{volume of a cylinder}\\\\ V=\pi r^2 h~~ \begin{cases} r=radius\\ h=height\\[-0.5em] \hrulefill\\ V=2827.43\\ h=4 \end{cases}\implies 2827.43=\pi r^2(4)\implies \cfrac{2827.43}{4\pi }=r^2 \\\\\\ \sqrt{\cfrac{2827.43}{4\pi }}=r\hspace{5em}\stackrel{\textit{twice that is the \underline{diameter}}}{2\sqrt{\cfrac{2827.43}{4\pi }}} ~~ \approx ~~ \text{\LARGE 30}[/tex]

Answer:√2/2

Step-by-step explanation:

Let's label the sides of the right triangle as follows:

The side adjacent to the angle θ (cosine is adjacent/hypotenuse): 6

The hypotenuse (the longest side): 6√2

The side opposite to the angle θ (sine is opposite/hypotenuse): 6√3

Using the Pythagorean theorem, we can find the length of the missing side:

a² + b² = c²

6² + (6√3)² = (6√2)²

36 + 108 = 72

144 = 72

√144 = √72

12 = 6√2

Now that we know the length of all three sides, we can use the cosine ratio to find the value of cos(θ):

cos(θ) = adjacent/hypotenuse = 6/6√2 = √2/2

Therefore, the value of cos(θ) in the right triangle with sides of 6, 6√2, and 6√3 is √2/2.

The answer is A. Evaluation researchers encounter more logistical problems than other researchers because evaluation research occurs in the context of real life.

Evaluation research often takes place in real-world settings, which can present logistical challenges such as accessing participants, coordinating schedules, and dealing with unexpected events. Additionally, evaluation research often involves multiple stakeholders and requires collaboration and communication among various groups, which can further complicate logistical issues. While evaluation research may also involve longer timelines, higher costs, measurement problems, and examination of multiple variables, these factors do not necessarily contribute to greater logistical challenges.

This means that evaluation researchers have to navigate complex, real-world situations, adapt to unforeseen challenges, and work with various stakeholders, making the research process more logistically challenging compared to controlled laboratory settings or theoretical research.

to learn more about theoretical research. click here:

https://brainly.com/question/29220441

#SPJ11

Evaluation research is a type of research that focuses on assessing the effectiveness, efficiency, and impact of programs, policies, or interventions in real-life settings.

The correct answer is A. occurs in the context of real life.

This often involves evaluating the outcomes and impacts of interventions in complex and dynamic environments, such as organizations, communities, or systems. As a result, evaluation researchers may encounter more logistical problems compared to other types of researchers because they need to navigate real-life contexts, deal with multiple stakeholders, collect data from diverse sources, and address issues such as ethics, confidentiality, and validity in the evaluation process. Logistical problems may include challenges related to data collection, measurement, sample selection, data quality, and managing time and resources.

Learn more about “ Logistical problems “ visit here;

https://brainly.com/question/31087596

#SPJ4