Answer:
20, 50, 25
Explanation:
I just figured it out somehow in my brain.
Suppose a student made a different sodium hydroxide solution using 0.401g of solid sodium hydroxide and 200mL of water. The student then standardized this solution using benzoic acid in a similar manner to that depicted in the simulation. From the following additional data recorded by the student: a) Mass of benzoic acid: 0.158g b) Volumer of the benzoic acid solution: 100.0mL c) Volume of sodium hydroxide need to neutralize the solution: 27.84mL Determine the molarity of the sodium hydroxide solution.
Answer:
0.05 M
Explanation:
Mass of benzoic acid= 0.158g
Volume of benzoic acid= 100 mL
Volume of sodium hydroxide = 27.84mL
Molar mass of benzoic acid= 122g/mol
Number of moles of benzoic acid= 0.158g/122g/mol= 1.3 × 10^-3 moles
C= no of moles/volume
C= 1.3 × 10^-3 moles × 1000/100
C= 0.013M
So;
Volume of acid VA = 100mL
Concentration of acid CA= 0.013M
Volume of Base VB = 27.84mL
Concentration of Base CB= ???
Number of moles of acid NA =1
Number of moles of Base NB= 1
From;
CAVA/CBVB= NA/NB
CAVANB= CBVBNA
CB= CAVANB/VBNA
CB= 0.013 × 100 × 1/27.84 × 1
CB= 0.05 M
What is the percentage of the actual yield of the reaction of 2.5 mol of Fe(NO3),
with 3.6 mol of Na2Co3, to form 6.3 mol of NaNO3 according to the reaction :
2Fe(NO3)3 + 3NaC03 - >
Fe2(CO3)3 + 6NaNO3 ?
Answer:
Percent yield = 87.5%
Explanation:
Given data:
Number of moles of Fe(NO₃)₃ = 2.5 mol
Number of moles of Na₂CO₃ = 3.6 mol
Actual yield of NaNO₃ = 6.3 mol
Percent yield of NaNO₃ = ?
Solution:
Chemical equation:
2Fe(NO₃)₃ + 3Na₂CO₃ → Fe₂(CO₃)₃ + 6NaNO₃
now we will compare the moles of both reactant with NaNO₃.
Fe(NO₃)₃ : NaNO₃
2 : 6
2.5 : 6/2×2.5 = 7.5
Na₂CO₃ : NaNO₃
3 : 6
3.6 : 6/3×3.6 = 7.2
Theoretical yield of NaNO₃ is 7.2 mol.
Percent yield:
Percent yield = actual yield / theoretical yield ×100
Percent yield = 6.3 mol / 7.2mol ×100
Percent yield = 87.5%
_______ are white blood cells that recognize specific antigens, and ultimately destroy them.
O lymphocytes
O pathogens
O water
Answer:
Lymphocytes
Explanation:
Pathogens are particles that make you sick like bacteria, viruses, amoebas. Water is essential for life but that's for metabolism, not fighting off against infection or viruses.
Answer:
Lymphocytes
Explanation:
lymphocytes are a kind of white blood cell (WBC). Lymphocytes are cells of the immune system and help fight infection. Lymphocytes live in lymph nodes, but also in the bloodstream and all over the body. Lymphocytes come in two main types: B-cells and T-cells
Where as water is totally not white blood cells and pathogens are viruses and bacterium
Photosynthesis makes (__________) and (____________) for an ecosystem.
Answer:
Oxygen and Sugar (Glucose).
Explanation:
Plants are autotrophs, which means they produce their own food. They use the process of photosynthesis to transform water, sunlight, and carbon dioxide into oxygen, and simple sugars that the plant uses as fuel.
What os the formula for hexaboron tetrabromide
Answer:
B6Br4
Explanation:
Chemical formula gives a representation of the number of atoms that each element in a compound or molecule. In this question which is asking to give the formula of hexaboron tetrabromide, the hexa means 6 while the tetra means four.
Since the number of atoms of each element is written as a prefix before the main element, this means that the chemical formula of hexaboron tetrabromide will be B6Br4.
A student walks 15 km in 3 hours. What is the student’s average speed?
A :45 km/h
B :5 km/h
12 : km/h
18 : km/h
Answer:
5 km/h
Explanation:
divide the hours to the distance
How many moles are present in a 5.8 g sample of copper?
A. 11
B. 0.091
C. 0.91
D. 5.5 x 10^22
please i need this for my finals
Explanation:
Molar mass of Cu = 63.5g/mol
Moles of Cu
= 5.8g / (63.5g/mol) = 0.091mol (B)
The number of moles present in a 5.8 g sample of copper is equal to 0.0913 mol. Therefore, option B is correct.
What is a mole?A mole can be defined as an international scientific unit that is used to determine for given count of particles. The particles are commonly identical entities but they are individually distinct.
A mole of the substance can be used to evaluate a large number of atoms, molecules, or particular particles. The amount of material can be measured as chemical entities of a substance in a sample.
The number of units in 1 mole of a material is equal to 6.023×10²³ which is called Avogadro’s constant.
Given, the mass of the copper = 5.8 g
The mass of one mole of copper = 63.5 g
We can calculate moles as, n = Mass/molar mass
Then, the number of moles of copper = 5.8/63.5 = 0.0913 mol
Therefore, the number of moles of copper is 0.0913 mol.
Learn more about the mole, here:
brainly.com/question/26416088
#SPJ2
24. H.SO, has
a) Ionic bond
b) both lonic and covalent bonds
c) ionic covalent and coordinate bonds
d) covalent bond
Answer:
b
Explanation:
Both ionic and covalent bonds when it has dissolved into water it will become ionic compound but when it was in gas situation it was covalent compound.
How many hydrogen atoms are present in .46 moles of NH3
Answer:
2.78 x 10²³
Explanation:
1 mole contains 6.02 x 10²³ hydrogen atoms => 0.46 mole contains 0.46(6.02 x 10²³) hydrogen atoms or 2.78 x 10²³ atoms.
Caution => When to use H vs H₂ => This problem is specific for 'hydrogen atoms' but some may simply say hydrogen. In such cases use H₂ or 'molecular hydrogen' is the focus. it's a matter of semantics, H vs H₂.
Name the following compound: S₂O₇
Answer:
disulfur heptoxide
Explanation:
What is weathering?
A.
the process by which sediment is compacted into rock
B.
the process by which rocks are broken down into sediment
C.
the process by which sediment is transported from one place to another
D.
the process by which sediment is deposited and built up into landforms
Answer:
B.
the process by which rocks are broken down into sediment
The pH scale for acids and bases ranges from
A. 17
B. 0-14
C. 1-14
D. 1-12
Answer: 0-14
Explanation: Hope this helps
What else is produced during the combustion of propane, C3H8?
H2O ,
C3H8,
O2,
or
C3H8O2?
Answer:
H20
Explanation:
Answer:
The answer is H20
Explanation:
What happened to the celery if you put in food color water
Answer:
the celery would change colour!
Explanation:
Describe what happens in the cell before the chemical reaction.
___________________________________________________________
Answer:
Chemical reactions that take place inside living things are called biochemical reactions. The sum of all the biochemical reactions in an organism is referred to as metabolism. Metabolism includes both exothermic (heat-releasing) chemical reactions and endothermic (heat-absorbing) chemical reactions.
___________________________________________________________
Which elements are diatomic?
1
H
3
Li
6
с
7
N
8
0
9
F
5
B
13
AI
2
He
10
Ne
18
Ar
15
P
16
S
17
CI
11
Na
19
K
4.
Be
12
Mg
20
Ca
38
Sr
31
Ga
33
As
35
Br
36
Kr
34
Se
52
Te
14
Si
32
Ge
50
Sn
82
Pb
114
FI
51
Sb
53
1
37
Rb
55
Cs
54
Xe
E
86
49
In
81
TI
113
Nh
56
Ba
83
Ві
84
Po
85
At
Rn
87
Fr
88
Ra
115
Mc
116
Lv
118
117
Ts
Og
Diatomic elements have to atoms of the element in a molecule.
What are diatomic elements?Diatomic elements are those elements whose atoms combine together to form molecules of the element. The elements that are diatomic in the list are;
HNOFClBrSeTeHence, diatomic elements have to atoms of the element in a molecule.
Learn more about diatomic molecules: https://brainly.com/question/4979095
When a living organism is successful in meeting all its needs ,this is called
A.active transport
B.endocytosis
C.homeostasis
D.exocytosis
Answer:
homeostasis
Explanation:
source Wiki
In biology, homeostasis (or “health”) is the state of steady internal, physical, and chemical conditions maintained by living systems. This is the condition of optimal functioning for the organism and includes many variables, such as body temperature and fluid balance, being kept within certain pre-set limits (homeostatic range). Other variables include the pH of extracellular fluid, the concentrations of sodium, potassium and calcium ions, as well as that of the blood sugar level, and these need to be regulated despite changes in the environment, diet, or level of activity. Each of these variables is controlled by one or more regulators or homeostatic mechanisms, which together maintain life.
Of the choices below, which is the most abundant gas in Earth's atmosphere?
Practice
A
argon
B
nitrogen
C
carbon dioxide
D
oxygen
Answer:
B. Nitrogen
Explanation:
Hope this helps :)
The answer is nitrogen gas.
Which of the following factors affect the rate of weathering in an area?
A.
climate
B.
topography
C.
rock composition
D.
all of the above
Answer:
D
Explanation:
pretty sure D
A cube of an unknown metal measures 0.200 cm on one side. The mass of the cube is 52 mg. Which of the following is most likely the unknown metal?
Metal Density(g/cm^3)
rhodium 12.4
copper 8.96
niobium 8.57
vanadium 6.11
zirconium 6.51
a. copper
b. rhodium
c. niobium
d. vanadium
e. zirconium
Answer:
Option E. Zirconium
Explanation:
From the question given above, the following data were obtained:
Length of side (L) of cube = 0.2 cm
Mass (m) of cube = 52 mg
Name of the unknown metal =?
Next, we shall determine the volume of the cube. This can be obtained as follow:
Length of side (L) of cube = 0.2 cm
Volume (V) of the cube =?
V = L³
V = 0.2³
V = 0.008 cm³
Next, we shall convert 52 mg to g. This can be obtained as follow:
1000 mg = 1 g
Therefore,
52 mg = 52 mg × 1 g / 1000 mg
52 mg = 0.052 g
Thus, 52 mg is equivalent to 0.052 g.
Next, we shall determine the density of the unknown metal. This can be obtained as follow:
Mass = 0.052 g.
Volume = 0.008 cm³
Density =?
Density = mass / volume
Density = 0.052 / 0.008
Density of the unknown metal = 6.5 g/cm³
Comparing the density of the unknown metal i.e 6.5 g/cm³ with those given in table in the above, we can conclude that the unknown metal is zirconium
A solution of sulfuric acid (H2SO4, 25.00 mL) was titrated to completion with 34.55 mL of 0.1020 M sodium hydroxide. What was the concentration of the sulfuric acid
Answer:
0.0705 M
Explanation:
We'll begin by writing the balanced equation for the reaction. This is given below:
H₂SO₄ + 2NaOH —> Na₂SO₄ + 2H₂O
From the balanced equation above,
The mole ratio of the acid, H₂SO₄ (nA) = 1
The mole ratio of the base, NaOH (nB) = 2
Next, data obtained from the question. This include the following:
Volume of acid, H₂SO₄ (Va) = 25 mL
Volume of base, NaOH (Vb) = 34.55 mL
Molarity of base, NaOH (Mb) = 0.1020 M
Molarity of acid, H₂SO₄ (Ma) =?
The molarity of the acid, H₂SO₄ can be obtained as follow:
MaVa / MbVb = nA/nB
Ma × 25 / 0.1020 × 34.55 = 1/2
Ma × 25 / 3.5241 = 1/2
Cross multiply
Ma × 25 × 2 = 3.5241
Ma × 50 = 3.5241
Divide both side by 50
Ma = 3.5241 / 50
Ma = 0.0705 M
Therefore, the concentration of the acid, H₂SO₄ is 0.0705 M
Answer:
C=0.140964M
Explanation:
M1V1=M2V2
DATA
M1=?
M2=0.1020M
V1=25.00ML
V2=34.55ML
M*25.00ML=(0.1020M)*(34.55ML)
M*25.00ML=3.5241M*ML
M=3.5241M*ML/25.00ML
M=0.140964M
Therefore, concentration of sulfuric acif is 0.140964M
PLEASE HELP !!!! How many grams of lithium sulfate
(Li2SO4) are required to dissolve in
459 g of water to make a 1.23 m
solution?
[?]g Li2SO4
Molar mass of Li2SO4: 109.94 g/mol
Answer:
I think you need to dissolve 62.116 (or 62.12g) of Li2SO4 .
The mass of lithium sulfate needed is 62g
What is Molality?Molality is also known as molal concentration. It is a measure of solute concentration in a solution. The solution is composed of two components; solute and solvent.
It is defined as the moles of the solute present in 1kg of the solvent. It is denoted by 'm'.
This term is useful in understanding the concentration of a solution because its formula is independent of temperature and pressure. Thus, the colligative properties are dependent on molality.
Given,
Molality of solution = 1.23m
Mass of solvent ( water) = 459g
Molality = number of moles of solute ÷ mass of solvent in kg
number of moles of solute = molality × mass of solvent in kg
= 1.23 × 0.459
= 0.564 moles
moles = mass / molar mass
mass= 0.564 × 109.94
= 62 g
Therefore, the mass of lithium sulfate needed is 62g
Learn more about Molality, here:
https://brainly.com/question/26921570
#SPJ7
Silver nitride is formed when a silver cation that has a 1+ charge combines with a nitrogen anion that has a 3- charge. Write the formula for the compound silver nitride.
When hydrogen reacts with calcium metal, what are the oxidation numbers of the calcium and hydrogen in the CaH2 product?
Ca(s)+ H2(g) → CaH2
a. +2 and -1
b. +1 and -2
c. +2 and 2
d. 0 and 0
e. -2 and +1
Answer: e. -2 and +1
Explanation:
Oxidation number or oxidation state : It represent the number of electrons lost or gained by the atoms of an element in a compound.
Oxidation reaction is defined as the reaction in which a substance looses its electrons. The oxidation number of the substance increases.
Reduction reaction is defined as the reaction in which a substance gains electrons. The oxidation number of the substance gets reduced.
[tex]Ca(s)+H_2(g)\rightarrow CaH_2[/tex]
The oxidation number of calcium (Ca) in free state is 0 and in [tex]CaH_2[/tex] , it is -2.
The oxidation number of hydrogen in [tex]H_2[/tex] is zero and oxidation number of hydrogen in [tex]CaH_2[/tex] is +1 as in hydrides hydrogen loses electrons.
The oxidation number of calcium has been +2, and the oxidation number of hydrogen has been -1. Thus, the correct option is A.
The oxidation number can be defined as the number of electrons that have been lost by an atom in a chemical reaction.
The oxidation number can be calculated as the:
The oxidation number of Hydrogen when it combines with the less electronegative element has been -1.
There have been 2 atoms of Hydrogen that lose an electron, thus the total oxidation contribution of hydrogen has been -2.
The oxidation number of hydrogen has been -1.
The oxidation number of Calcium has been:
Ca atom has taken an electron from the hydrogen.
[tex]\rm Ca\;+\;e^-\;\rightarrow\;Ca^-[/tex]
The calcium takes one electron from each atom bonded. Thus the oxidation number of calcium has been +2.
The oxidation number of calcium has been +2, and the oxidation number of hydrogen has been -1. Thus, the correct option is A.
For more information about oxidation numbers, refer to the link:
https://brainly.com/question/15167411
Please answer!!! Will give brainliest to best answer!!
1. What is the difference between magma and lava?
2. Under what circumstances do large crystals form from a cooling magma?
3. Under what circumstances do small crystals form from a cooling magma?
4. What happens to the mineral particles in salt water when the water evaporates?
5. Explain how halite forms.
6. Explain how mineral veins form.
Answer:
I can answer 1, lqva is magma outside of the volcano
When a mixture of rock pieces, salt and water is filtered, what will be found as the filtrate and what will be found as the residue
Answer:
Filtrate: Mixture of salt and water.
Residue: rock pieces
Answer:
Salt solution will be the filtrate
and the rock pieces will be the residue.
Explanation:
This is because salt is soluble in water and hence
it cannot be filtered out of water giving as a salt solution as the filtrate and since the rock pieces are not soluble in water they are left out and they become the residue.
Explain what is meant by a half-life of 150 years. Then, write a function that models the amount, A, of a 100-mg sample remaining after T years for a substance with a half-life of 150 years. Use graphing software to graph the equation. Answer in complete sentences.
Answer:
Half-life of 150 years are those year that a radioactive element take to disintegrate to a half of it's original value.
I don't have graphical software
How does heat differ from temperature?
O Temperature is the measure of heat.
O Temperature and heat are the same thing.
O Temperature measures thermal energy, and heat is the flow of thermal eneroy
O Temperature measures the loss of energy, and heat measures the gain of eneray.
Answer: Temperature measures thermal energy, and heat is the flow of thermal energy
Explanation:
Heat describes the transfer of thermal energy between molecules within a system. Heat measures how energy moves or flows. It is measured in Joules.
Temperature measures the hotmess or coldness of a body or how much thermal energy it contains . Temperature describes the average kinetic energy of molecules within a material or system. It is measured in Celsius (°C), Kelvin(K), or Fahrenheit (°F).
Thus the correct option is Temperature measures thermal energy, and heat is the flow of thermal energy
Answer:
its c
Explanation:
edg 2021
How many milliliters of 0.128 M nitric acid are required to neutralize 11.1 mL of 0.184 M sodium hydroxide? Answer with the correct number of significant digits.
Answer:
I think 7.72 mL
11.1/184 × 128/184=7.72
if you start with 362 grams of C3 H8 how many grams of H2O will be produced
Answer:
52 g H2O (to 2 significant figures)
Explanation:
I hope you like my answer:)
Can you mark me as brainliest please