The student's claim is incorrect. According to Newton's Third Law of Motion, for every action, there is an equal and opposite reaction.
How is Newton's Third Law explained for a spacecraft?In this case, the force exerted by the astronaut on her feet is equal and opposite to the force exerted by the feet on the astronaut. Therefore, moving her feet in the opposite direction to each other will result in equal and opposite forces, which will cancel each other out and not propel the astronaut towards the space station.
To propel herself towards the space station, the astronaut needs to exert a force in the direction opposite to the direction of the space station. This can be achieved by using a jetpack or another propulsion system.
Find out more on space station here: https://brainly.com/question/18650677
#SPJ1
019 (part 1 of 2) 10.0 points
A Carnot engine has a power output of
197 kW. The engine operates between two
reservoirs at 20◦C and 425◦C.
How much thermal energy is absorbed each
hour?
Answer in units of J.
020 (part 2 of 2) 10.0 points
How much thermal energy is lost per hour?
Answer in units of J.
Thermal energy is absorbed each hour is 13.53 x 10¹² J and thermal energy lost per hour is 7.092 x 10¹² J.
What is the Carnot engine's operating principle?a technique of isothermal gas expansion that is reversible. In this process, the ideal gas in the system receives amount heat from a heat source at a high temperature Thigh, expands and does work on surroundings. a technique of adiabatic gas expansion that is reversible. The system is thermally insulated throughout this process.
Temp_cold = 20°C + 273.15 = 293.15 K
Temp_hot = 425°C + 273.15 = 698.15 K
efficiency = 1 - (Temp_cold / Temp_hot)
= (698.15 K * 293.15 K) / (698.15 K)² - (293.15 K)²
efficiency = 0.524 or 52.4%
thermal energy absorbed/ hour = power output / efficiency
= 197 kW / 0.524
= 375.95 MJ/h x 3.6 x 10⁶ J/kWh = 13.53 x 10¹² J
thermal energy is lost per hour
W = power output x time = 197 kW x 1 h = 197 kWh
W = 197 kWh x 3.6 x 10⁶ J/kWh = 7.092 x 10¹²1J
Since the engine is running in a cycle, the system's internal energy is equal to zero, hence U = 0.
Q = ΔU + W
hence, thermal energy lost per hour = Q = W = 7.092 x 10^11 J
To know more about thermal energy visit:-
https://brainly.com/question/27359499
#SPJ1
The melting of methane hydrates on the seafloor can lead to a sharp rise in global temperatures because methane is a powerful greenhouse gas (true or false)
The melting of methane hydrates on the seafloor can lead to a sharp rise in global temperatures because methane is a powerful greenhouse gas. The statement is true.
Methane is a powerful greenhouse gas, with a global warming potential that is estimated to be about 25 times greater than that of carbon dioxide over a 100-year time horizon. Methane hydrates are solid, crystalline compounds that contain a large amount of methane gas trapped within water molecules. These hydrates are stable under certain temperature and pressure conditions, but if they become destabilized, they can release large amounts of methane into the atmosphere.
The melting of methane hydrates on the seafloor is a concern because it has the potential to release vast amounts of methane into the atmosphere, which could significantly contribute to global warming and climate change. This process could be triggered by rising ocean temperatures, changes in ocean currents, or other factors that alter the stability of the hydrates. While the exact extent and impact of this phenomenon are still uncertain, it is an area of active research and concern among climate scientists.
To learn more about temperature, refer:-
https://brainly.com/question/2662380
#SPJ11
Potable water is ____.
A. also known as industrial wastewater
B. also known as irrigation water
C. also known as sewage
D. also known as groundwater
E. fit for drinking
Potable water is fit for drinking. Option E
What is portable water?Potable water is water that is safe for human consumption and considered fit for drinking. It is free from harmful bacteria, viruses, chemicals, and other contaminants that can cause health problems.
Potable water can come from different sources such as groundwater, surface water, or treated wastewater, and it is typically treated and disinfected to ensure its safety before being distributed to consumers.
Portable water isn't known as industrial wastewater, irrigation water, groundwater and sewage.
Find more exercises on portable water;
https://brainly.com/question/2570757
#SPJ1
a pendulum is swinging upward and is halfway toward its highest position, as shown, when the string breaks. which of the paths shown best represents the one that the ball would take after the string breaks?
The option A is best representation of the path that the ball would take after the string breaks.
When the string of a pendulum breaks, the ball's path will follow the laws of motion, specifically the law of conservation of energy. As the ball was halfway to its highest position, it had a certain amount of potential energy.
When the string broke, this potential energy would convert to kinetic energy, causing the ball to move in a straight line tangent to the point where the string broke.
Therefore, the path that the ball would take after the string breaks would be a straight line away from the pivot point of the pendulum, as shown in option A. The other paths shown do not follow the laws of motion and do not account for the conservation of energy. Option (A) is the correct answer.
To learn more about : string
https://brainly.com/question/24994188
#SPJ11
Note the full question is
A pendulum is swinging upward and is halfway toward its highest position, as shown, when the string breaks. which of the paths shown best represents the one that the ball would take after the string breaks?
A) A
B) B
C) C
D) D
E) E
If a student thinks that the calorimeter has tap water in it, but it actually contains salt water (which has a lower specific heat than tap water), then
The calorimeter has tap water in it, but it actually contains salt water (which has a lower specific heat than tap water, then the student may make an error in their calorimetry calculation.
What is a calorimetry ?Calorimetry is the science of measuring the heat of chemical reactions or physical changes, and the study of the relationship between heat, temperature, and energy. It is used to measure the amount of heat energy released or absorbed in a chemical or physical change, and to calculate the enthalpy change of a reaction.
What is a reaction ?Reaction is a process that results in the transformation of one or more substances into different substances. Chemical reactions involve the breaking and formation of chemical bonds between atoms, ions, or molecules, and can be accompanied by the release or absorption of energy in the form of heat, light, or electricity.
To know more about calorimetry visit :
https://brainly.com/question/11477213
#SPJ1
a merry-go-round accelerates from rest to 0.63 rad/s in 27 s . assuming the merry-go-round is a uniform disk of radius 7.5 m and mass 29000 kg , calculate the net torque required to accelerate it.
The net torque required to accelerate is 28496 Nm.
What is the net torque required to accelerate it?The net torque required to accelerate a uniform disk of radius 7.5 m and mass 29000 kg from rest to 0.63 rad/s in 27 s is needed.
The problem is asking for the net torque required to accelerate a merry-go-round from rest to a final angular velocity of 0.63 rad/s in 27 seconds. The merry-go-round is assumed to be a uniform disk, which means that its mass is evenly distributed across its entire radius. We are also given the radius of the merry-go-round (7.5 m) and its mass (29000 kg).
To solve the problem, we can use the formula:
[tex]τ = Iα[/tex]
where τ is the net torque applied to the merry-go-round, I is its moment of inertia, and α is its angular acceleration. Since the merry-go-round is initially at rest, its initial angular velocity is zero. Using the formula for angular acceleration, we can find that:
[tex]α = Δω/Δt = (0.63 rad/s - 0 rad/s) / 27 s = 0.0233 rad/s^2[/tex]
To find the moment of inertia of the merry-go-round, we can use the formula for the moment of inertia of a uniform disk:
[tex]I = (1/2)mr^2[/tex]
where m is the mass of the disk and r is its radius. Substituting the given values, we get:
[tex]I = (1/2)(29000 kg)(7.5 m)^2 = 1220625 kg m^2[/tex]
Finally, we can use the formula [tex]τ = Iα[/tex] to find the net torque required to accelerate the merry-go-round:
[tex]τ = (1220625 kg m^2)(0.0233 rad/s^2) = 28496 Nm[/tex]
Therefore, the net torque required to accelerate the merry-go-round is 28496 Nm.
Learn more about torque
brainly.com/question/25708791
#SPJ11
A loose spiral spring carrying no current is hung from a ceiling. When a switch is thrown so that a current exists in the spring, do the coils move closer together move farther apart not move at all
The coils in the spring will move farther apart when a current is passed through it because of the solenoid effect.
The solenoid effect describes the way a loose spiral spring expands when a current is fed through it. An electric current flows through a coil of wire to create a solenoid, a type of electromagnet. A magnetic field is produced when current passes through the coil, and the magnetic field lines are parallel to the axis of the coil. The amount of current flowing through the coil and the number of wire turns within the coil determines how strong the magnetic field is.
Because a loose spiral spring behaves like a coil of wire, the solenoid effect is seen in this situation. The magnetic field that is created around a spring when a current is sent through it has lines that are parallel to the spring's axis. The interaction between the magnetic field and the spring's current produces a force that pushes the coils apart.
To learn more about solenoids, refer to:
https://brainly.com/question/4340558
#SPJ4
at 2.1 km from the transmitter, the peak electric field of a radio wave is 350 mv/m . what is the peak electric field 10 km from the transmitter?
The peak electric field 10 km from the transmitter is approximately 15.435 mV/m.
To find the peak electric field 10 km from the transmitter, we can use the inverse square law.
This law states that the intensity of a wave (such as the electric field in this case) is inversely proportional to the square of the distance from the source.
Here's a step-by-step explanation:
1. Note the initial distance (d1) and electric field (E1):
d1 = 2.1 km, E1 = 350 mV/m.
2. Convert d1 to meters:
d1 = 2100 m.
3. Note the final distance (d2):
d2 = 10 km.
4. Convert d2 to meters:
d2 = 10,000 m.
5. Use the inverse square law formula:
E2 = E1 * (d1²) / (d2²).
6. Plug in the values:
E2 = 350 * (2100²) / (10,000²).
7. Calculate E2:
E2 ≈ 15.435 mV/m.
Learn more about electric field:
https://brainly.com/question/14372859
#SPJ11
How can we tell if a collision is elastic or inelastic?
Answer:
The type of collision, whether elastic or inelastic, can be determined by observing the behavior of the colliding objects before and after the collision. Here are some key characteristics that can help identify whether a collision is elastic or inelastic:
Conservation of Kinetic Energy: In an elastic collision, kinetic energy is conserved, while in an inelastic collision, some of the kinetic energy may be converted into other forms of energy.
Objects' Motion After Collision: In an elastic collision, objects bounce off each other and move independently, while in an inelastic collision, objects may stick together, deform, or move as a single mass.
Restitution Coefficient: In an elastic collision, the restitution coefficient is close to 1, indicating high bounce-back, while in an inelastic collision, the restitution coefficient is less than 1, indicating less bounce-back.
Conservation of Momentum: In both elastic and inelastic collisions, momentum is conserved, but the change in velocity of the objects after the collision can indicate whether the collision is elastic or inelastic.
in an rc circuit what teh range of c needed for the capacitor to be 99.3% charged within 10 ms of turning the voltage source on ?
The range of capacitance needed for the capacitor to be 99.3% charged within 10 ms of turning the voltage source on is greater than or equal to 56.3 times the resistance in ohms.
To calculate the range of capacitance needed for the capacitor to be 99.3% charged within 10 ms of turning the voltage source on in an RC circuit, we can use the following formula:
Vc(t) = Vmax * (1 - e^(-t/RC))
where Vc(t) is the voltage across the capacitor at time t, Vmax is the maximum voltage of the source, e is the mathematical constant approximately equal to 2.718, R is the resistance in ohms, C is the capacitance in farads, and t is the time in seconds.
When the capacitor is 99.3% charged, the voltage across it is 0.993 * Vmax. Substituting this value into the formula and solving for C, we get:
C >= t / (R * ln(1 / (1 - 0.993)))
C >= 10 ms / (R * ln(1 / 0.007))
C >= 56.3 * R
Therefore, the range of capacitance needed for the capacitor to be 99.3% charged within 10 ms of turning the voltage source on is greater than or equal to 56.3 times the resistance in ohms.
Know more about RC circuit here:
https://brainly.com/question/2741777
#SPJ11
when does a star become a main-sequence star? when the rate of hydrogen fusion within the star's core is high enough to maintain gravitational equilibrium when hydrogen fusion is occurring throughout a star's interior when the protostar assembles from a molecular cloud when a star becomes luminous enough to emit thermal radiation the instant when hydrogen fusion first begins in the star's core
Answer: hope it helps
Explanation:
A protostar becomes a main sequence star when its core temperature exceeds 10 million K. This is the temperature needed for hydrogen fusion to operate efficiently.
Please help I need to answer fast the fate of my graduation depends on it.
First, we need to find the total mass of the system by adding the masses of the two objects: m_total = m1 m2 = 50.0 kg 75.0 kg = 125.0 kg Next, we can plug in the given force and mass values into the equation: F = ma 40.0 N = 125.0 kg * a Solving for a: a = 40.0 N
125.0 kg * a
Solving for a:
a = 40.0 N / 125.0 kg
a = 0.32 m/s^2
Therefore, the acceleration of the system is 0.32 m/s^2.
what is the magnetic field inside a coil with the following conditions: 636 number of turns, 0.487 a of current and a length of 2.12 cms.
The magnetic field inside the coil is 0.036 T.
As the area of the coil increases, the magnetic field strength increases, and as the length of the wire increases, the magnetic field strength decreases. Understanding the factors that affect the magnetic field inside a coil is important in designing and optimizing various devices that use electromagnetic fields, such as transformers, motors, and generators. The magnetic field inside a coil can be calculated using the formula:
B = (μ₀ * n * I * A) / L
where,
μ₀ = permeability of free space = 4π x 10^-7 T m/A
n = number of turns
I = current in amperes
A = area of the coil in square meters
L = length of the coil in meters
Substituting the given values,
B = (4π x 10^-7 T m/A * 636 turns * 0.487 A * (2.12 x 10^-2 m)^2) / (2.12 x 10^-2 m)
B = 0.036 T (Tesla)
To know more about magnetic field, here
brainly.com/question/14848188
#SPJ4
The most popular grip in tennis is
the western grip
the eastern grip
the double handed grip
the continental grip
Answer:
The answer is Continental Grip
what does the technique of interferometry allow?what does the technique of interferometry allow?it allows two or more telescopes to obtain a total light-collecting area much larger than the total light-collecting area of the individual telescopes.it allows us to determine the chemical composition of stars.it allows two or more telescopes to obtain the angular resolution of a single telescope much larger than any of the individual telescopes.it allows the same telescope to make images with both radio waves and visible light.it allows astronomers to make astronomical observations without interference from light pollution.
The technique of interferometry allows two or more telescopes to obtain the angular resolution of a single telescope much larger than any of the individual telescopes.
This is achieved by combining the signals received by the telescopes to create a single image with a higher resolution. Interferometry is especially useful for studying objects with small angular sizes, such as stars and planets.
Additionally, interferometry allows astronomers to make astronomical observations without interference from light pollution, as it can separate the signals from the object being observed from the background light.
However, interferometry does not directly determine the chemical composition of stars, although it can provide information about their temperature and other physical properties.
Learn more about interferometry:
https://brainly.com/question/30054443
#SPJ11
15) monochromatic coherent light shines through a pair of slits. if the distance between these slits is decreased, which of the following statements are true of the resulting interference pattern? (there is more than one correct choice.) a) the distance between the maxima stays the same. b) the distance between the maxima decreases. c) the distance between the minima stays the same. d) the distance between the minima increases. e) the distance between the maxima increases.
Two of the correct statements regarding this are:
b) the distance between the maxima decreases
d) the distance between the minima increases
When monochromatic coherent light shines through a pair of slits, an interference pattern is created. This pattern is dependent on the distance between the slits. If the distance between the slits is decreased, the resulting interference pattern will be affected.
When the distance between the slits is decreased, the interference pattern becomes wider, and the distance between the maxima decreases. The distance between the minima, on the other hand, increases.
This is because the interference pattern is created by the interaction of waves, and when the distance between the slits is decreased, the waves interfere with each other differently.
This causes the pattern to shift and change. Therefore, the resulting interference pattern is affected by the distance between the slits.
To learn more about : minima
https://brainly.com/question/29512870
#SPJ11
the reason that evaporation is a cooling process is group of answer choices due to conduction and convection. the more energetic molecules escape the liquid. radiation of heat during the process. all of the above none of the above
Evaporation is a cooling process because more energetic molecules escape the liquid, carrying away heat through radiation. Answer: "None of the above".
The release of more energising molecules from the liquid during evaporation causes cooling. The heat energy that these molecules bring with them when they go lowers the liquid's temperature. Not conduction or convection, but heat radiation throughout the operation is mostly to blame for this cooling impact.
Therefore, "none of the above" is the appropriate response. In general, the energy needed to break the intermolecular bonds in the liquid, which lowers the temperature overall, is responsible for the cooling impact of evaporation.
Learn more about Evaporation:
https://brainly.com/question/25310095
#SPJ4
a circuit breaker is rated for a current of 15 a rms at a voltage of 240 v rms. (a) what is the largest value of imax that the breaker can carry?
The largest value of I_max that the breaker can carry is approximately 21.21 A.
Given a circuit breaker rated for 15 A RMS at 240 V RMS, we want to find the largest value of Imax (maximum current) that the breaker can carry. To do this, we'll use the following formula:
I_max = √2 * I_RMS
Where I_RMS is the rated current in RMS, which is 15 A in this case.
Substitute the value of I_RMS into the formula:
Imax = √2 * 15 A
Calculate the value of Imax:
Imax ≈ 21.21 A
Therefore approximately 21.21 A is the largest value of Imax that the breaker can carry.
More on circuit breaker: https://brainly.com/question/29480920
#SPJ11
after a sci a patient may experience all of the following except: a. spasticity b. resting tremor c. autonomic dysreflexia d. orthostatic hypotension
The right response is resting tremor (option b). A patient may have spasticity, autonomic dysreflexia, and orthostatic hypotension following a spinal cord injury (SCI). SCI is not often linked to resting tremor.
SCI can interfere with the body's ability to communicate with the brain, leading to a variety of physical symptoms. Spasticity, which manifests as stiffness, muscle spasms, and increased muscle tone, is a frequent consequence. Patients with SCI at or above the T6 level may develop autonomic dysreflexia, a potentially fatal illness that is characterised by an abrupt rise in blood pressure. When someone stands up, their blood pressure drops, causing lightheadedness and dizziness. This condition is known as orthostatic hypotension.
While essential tremor, Parkinson's disease, and other neurological illnesses are frequently linked to resting tremor, SCI is not typically one of them.
learn more about autonomic dysreflexia here:
https://brainly.com/question/30331093
#SPJ11
The right response is resting tremor (option b). A patient may have spasticity, autonomic dysreflexia, and orthostatic hypotension following a spinal cord injury (SCI). SCI is not often linked to resting tremor.
SCI can interfere with the body's ability to communicate with the brain, leading to a variety of physical symptoms. Spasticity, which manifests as stiffness, muscle spasms, and increased muscle tone, is a frequent consequence. Patients with SCI at or above the T6 level may develop autonomic dysreflexia, a potentially fatal illness that is characterised by an abrupt rise in blood pressure. When someone stands up, their blood pressure drops, causing lightheadedness and dizziness. This condition is known as orthostatic hypotension.
While essential tremor, Parkinson's disease, and other neurological illnesses are frequently linked to resting tremor, SCI is not typically one of them.
learn more about autonomic dysreflexia here:
brainly.com/question/30331093
#SPJ4
catching a wave, a 73.2-kg surfer starts with a speed of 1.44 m/s, drops through a height of 1.84 m, and ends with a speed of 8.89 m/s. how much nonconservative work was done on the surfer?
The nonconservative work done on the surfer is 2845.5 J.
We can use the work-energy theorem to solve this problem. The work-energy theorem states that the net work done on an object is equal to its change in kinetic energy. In this case, we can calculate the initial and final kinetic energies of the surfer and find the difference, which will give us the net work done.
The initial kinetic energy of the surfer is:
[tex]K_i = (1/2) * m * v_i^2[/tex]
[tex]K_i = (1/2) * 73.2 kg * (1.44 m/s)^2[/tex]
K_i = 75.7 J
The final kinetic energy of the surfer is:
[tex]K_f = (1/2) * m * v_f^2[/tex]
[tex]K_f = (1/2) * 73.2 kg * (8.89 m/s)^2[/tex]
K_f = 2921.2 J
The change in kinetic energy is:
ΔK = K_f - K_i
ΔK = 2921.2 J - 75.7 J
ΔK = 2845.5 J
According to the work-energy theorem, this change in kinetic energy must be equal to the net work done on the surfer. Therefore, the nonconservative work done on the surfer is:
W_nc = ΔK
W_nc = 2845.5 J
So, the nonconservative work done on the surfer is 2845.5 J.
Learn more about nonconservative work
https://brainly.com/question/28588859
#SPJ4
although protons repel each other because each one has a positive charge, protons are stable in a nucleus because of group of answer choices the neutrons, which have a counterbalancing negative charge. the strong force. the weak force. the gravitational force. the electrons, which have a counterbalancing negative charge. neutrons getting between protons, separating the protons from each other.
The stability of the nucleus is maintained through the combined effects of the strong force and neutrons.
Although protons repel each other due to their positive charge, they are stable in a nucleus because of the strong force, which is a fundamental force that binds the particles together.
The strong force is the strongest force in nature and overcomes the electromagnetic force that causes the protons to repel each other. Neutrons, which have no charge, also play a significant role in stabilizing the nucleus.
The neutrons act as a buffer between the positively charged protons, separating them from each other and reducing the electrostatic repulsion. Electrons, which have a negative charge, are not involved in stabilizing the nucleus as they are located outside the nucleus in orbitals around the nucleus.
To learn more about : neutrons
https://brainly.com/question/12706684
#SPJ11
A planet has mass M = 8.00 × 1023 kg. At what distance will the centripetal acceleration of an orbiting space station be equal to the gravitational acceleration on Earth’s surface? (G = 6.67 × 10–11 m3·kg–1·s–1)answer is 2.33 x10^6 m. Can someone show the work on how to get this answer?
To find the distance at which the centripetal acceleration of an orbiting space station around a planet is equal to Earth's gravitational acceleration, we need to set up an equation involving the planet's mass (M), gravitational constant (G), and Earth's gravitational acceleration (g).
Given:
M = 8.00 × 10²³ kg
G = 6.67 × 10^(-11) m³·kg^(-1)·s^(-1)
g = 9.81 m/s² (Earth's gravitational acceleration)
Centripetal acceleration (a_c) is given by the formula:
a_c = (G * M) / r²
where r is the distance from the planet's center.
We want the centripetal acceleration to be equal to Earth's gravitational acceleration, so we can set them equal:
g = (G * M) / r²
Now, we need to solve for r:
r² = (G * M) / g
r² = (6.67 × 10^(-11) m³·kg^(-1)·s^(-1) * 8.00 × 10²³ kg) / 9.81 m/s²
r² ≈ 5.42 × 10¹² m²
Now, take the square root of both sides to find r:
r ≈ 2.33 × 10^6 m
So, at a distance of 2.33 x 10^6 meters from the planet's center, the centripetal acceleration of an orbiting space station will be equal to the gravitational acceleration on Earth's surface.
To learn more about Centripetal Acceleration and Gravitational Acceleration. Please Visit:
https://brainly.com/question/26143683
#SPJ11
The following formula can be used to determine the distance from the planet's centre at which the centripetal acceleration of an orbiting space station equals the gravitational acceleration on Earth's surface:
[tex]r = (GM/g)^(1/3)[/tex]
where the gravitational constant, G, equals 6.67 1011 m3 kg-1 s-1.
M is equal to 8.00 1023 kg (the planet's mass).
Gravitational acceleration on Earth's surface is equal to 9.81 m/s2.
When we change the values, we obtain:
[tex]r = [(6.67 × 10^-11) × (8.00 × 10^23) / 9.81]^(1/3)[/tex]
[tex]r = 2.33 × 10^6 m[/tex]
Therefore, 2.33 x 106 m is the necessary distance.
F = G (m1m2 / r2), where G is the gravitational constant, m1 and m2 are the masses of the two objects, and r is the distance between them, can be used to express the gravitational force between two objects. When a planet and a satellite are involved, the centripetal force that holds the satellite in orbit around the planet is produced by the gravitational force. As a result, we may compare the centripetal force to gravity and find r. This results in the formula above, which we can use to calculate the necessary distance.
learn more about gravitational acceleration here:
https://brainly.com/question/30429836
#SPJ11
. for schrodinger's equation of the h2 molecule, the kinetic energy has contributions from a. electrons only b. nuclei only c. both electrons and nuclei d. only one electron and one nucleus
The kinetic energy in Schrödinger's equation for the H2 molecule includes contributions from both electrons and nuclei. Thus the correct option is C.
The kinetic energy term in Schrödinger's equation for the H2 molecule refers to the energy involved in the motion of the particles. The H2 molecule comprises two hydrogen nuclei and two electrons, therefore the electrons and the nuclei both contribute to the kinetic energy.
The nuclei contribute to the kinetic energy by their mobility, whereas the electrons do so through their wave-like behaviour. The H2 molecule's kinetic energy term in Schrödinger's equation includes contributions from both electrons and nuclei, making option C the right response.
Learn more about kinetic energy:
https://brainly.com/question/30285686
#SPJ4
The kinetic energy in Schrödinger's equation for the H2 molecule includes contributions from both electrons and nuclei. Thus the correct option is C
explanation - For Schrödinger's equation of the H2 molecule, the kinetic energy has contributions from both electrons and nuclei. This is because the kinetic energy term in the equation accounts for the motion of all particles in the system, which in this case includes both the electrons and nuclei of the H2 molecule. Therefore, options a, b, and d are incorrect.
To know more about the schrodinger equation, click on this -
brainly.com/question/31441754
#SPJ11
A highway curve is banked (inclined) in such a way that a car travelling at a speed of 18.0m/s can round the curve without skidding, in the absence of friction. If the banking angle is 37°, what is the radius of the curve?
In order for a vehicle travelling at 18.0 m/s to negotiate highway bend without sliding, curve must be banked (inclined). The radius of curve approximately 33.1 metres.
What is the formula for the radius of a road curve?The coefficient of side friction is found to be 0.10, and the superelevation at one horizontal curve has been set at 6.0%.the formula for calculating a road curve's radiusFind the shortest curve radius necessary to ensure safe vehicle operation.
speed of the car v = 18.0 m/s
angle of banking of the curve θ = 37°
acceleration due to gravityg = 9.81 m/s²
radius of the curve = r
N = mg * cos(θ).........1
also
N = mv² / r...........2
from equation 1 and 2 we get
mg * cos(θ) = mv² / r
r = v² / (g * cos(θ))
r = (18.0 m/s)² / (9.81 m/s² * cos(37°)) ≈ 33.1 m
Therefore, radius of the curve is approximately 33.1 meters.
To know more about radius of the curve visit:-
https://brainly.com/question/12868546
#SPJ1
The majority of Venus's surface is:
A. volcanic plains with flowing lava.
B large, flat mesas with tiny valleys.
C. thick, soupy clouds of hydrogen.
D. frozen dunes of dust and sand.
Answer:
C.
Explanation:
When Venus surface get bit cold when weather hits the planet gets soupy clouds and etc.
a 2.99 kg particle has a velocity of (2.95 i hat - 3.97 j) m/s.Find the magnitude and direction of its momentum.
Answer:
P (momentum) = M * V
V = (2.95^2 + 3.97^2)^1/2 = 4.95 m/s
P = 2.99 kg * 4.95 m/s = 14.8 kg-m/sec total momentum
tan θ = Vy / Vx = -3.97 / 2.95 = -1.35
θ = 53.4 deg below positive x-axis
5. Explain the law of conservation of energy using a relevant example from every day life.
The law of conservation of energy states that energy is neither created nor destroyed but is transformed from one form to another.
What is law of conservation of energy?The law of conservation of energy is the law that states that energy is neither created nor destroyed but is transformed from one form to another.
Examples of activities of everyday life that shows the conservation of energy include the following:
For loudspeaker, electrical energy is converted into sound energy.For a microphone, sound energy is converted into electrical energy.For a generator, mechanical energy is converted into electrical energy.When fuels are burnt, chemical energy is converted into heat and light energyLearn more about energy here:
https://brainly.com/question/25959744
#SPJ1
An example of the law of conservation of energy is a roller coaster.
What is the law of conservation of energy?The law of conservation of energy states that energy cannot be created or destroyed, only transferred or transformed from one form to another. This means that the total amount of energy in a closed system remains constant over time.
A roller coaster car gains kinetic energy as it moves down the track, but it also loses potential energy. At the bottom of the track, the car has the most kinetic energy and the least potential energy, while at the top of the track, it has the most potential energy and the least kinetic energy. However, the total amount of energy in the system remains constant.
Learn about law of conservation of energy here https://brainly.com/question/166559
#SPJ1
if you comb your hair on a dry day, the comb can become positively charged. can your hair remain neutral? explain. (
When you comb your hair on a dry day, the friction between your hair and the comb can lead to the transfer of electrons from one material to another.
Electrons are negatively charged particles that are present in all materials.
The material that loses electrons becomes positively charged, as it has lost negatively charged particles.
In this case, the comb is likely to become positively charged as it loses electrons to your hair during the combing process.
The material that gains electrons becomes negatively charged, as it has gained negatively charged particles.
In this case, your hair is likely to gain electrons from the comb during the combing process, making it negatively charged.
However, whether or not your hair remains neutral depends on the balance of electrons that are transferred during the process.
If the transfer of electrons is balanced, such that the comb loses an equal number of electrons to the hair and the hair gains an equal number of electrons from the comb, then the hair will remain neutral.
If the transfer of electrons is unbalanced, and the hair gains more electrons than the comb loses, then the hair will become negatively charged.
In practice, it is difficult to achieve a perfectly balanced transfer of electrons, so it is possible that your hair may become slightly negatively charged when you comb it on a dry day.
However, the charge imbalance is likely to be very small and may not be noticeable.
Overall, the process of combing your hair on a dry day can lead to the transfer of electrons between the comb and your hair, resulting in the comb becoming positively charged and your hair becoming slightly negatively charged.
However, whether or not your hair remains neutral depends on the balance of electrons that are transferred during the process.
To know more about friction visit link :
https://brainly.com/question/28356847
#SPJ11
a wire of length 4.35 m and mass 137 g is under a tension of 125 n. a standing wave has formed which has seven nodes including the endpoints. a. draw the wave pattern b. what is the frequency of this wave? c. which harmonic is it? d. what is the fundamental frequency
The standing wave's fundamental frequency is the frequency of the first harmonic, which has one node and two antinodes, whereas the number of nodes determines the standing wave's harmonic number.
A 4.35 metre long, 137 gramme wire is being pulled at 125 newtons of force. With seven nodes total, including the endpoints, a standing wave has developed.
A collection of dots and dashes can be used to represent the wave pattern. The relationship between wave speed and wavelength is used to compute the standing wave's frequency. The tension in the wire and its linear mass density are used to calculate the wave speed.
The standing wave's fundamental frequency is the frequency of the first harmonic, which has one node and two antinodes, whereas the number of nodes determines the standing wave's harmonic number.
Learn more about standing wave:
https://brainly.com/question/30114344
#SPJ4
help me please oml 2 one
Color: Both the bromine gas and steak have a brownish color.
What is bromine gas?Bromine gas is a reddish-brown, nonflammable, and highly toxic gas with a very strong, unpleasant odor. It is composed of two heavy, diatomic, halogen molecules, Br2, and is the only nonmetal element that exists as a liquid at room temperature. Bromine gas is denser than air and is soluble in water and organic solvents.
Texture: The bromine gas is a gas and therefore has no texture, while the steak is solid and has a firm texture.
Temperature: The bromine gas is a gas and therefore has a lower temperature than the steak, which is at room temperature.
Bromine Gas and Juice:
Color: The bromine gas is brownish and the juice is a yellowish or orange color.
Texture: The bromine gas is a gas and therefore has no texture, while the juice is a liquid and has a smooth texture.
Temperature: The bromine gas is a gas and therefore has a lower temperature than the juice, which is at room temperature.
To learn more about bromine gas
https://brainly.com/question/1126306
#SPJ1