A poll reported that 66 percent of adults were satisfied woth the job the major airlines were doing. Suppose 25 adults are selected at random and the number who are satisfied is recorded.
1. Explain why this is a binomial experiment.
A. This is a binomial experiment because there are three mutually exclusive outcomes for each​ trial, there is a fixed number of ​trials, the outcome of one trial does not affect the outcome of​ another, and the probability of success is the same for each trial.
B. This is a binomial experiment because there are two mutually exclusive outcomes for each​ trial, there is a random number of​ trials, the outcome of one trial does not affect the outcome of ​another, and the probability of success is the same for each trial.
C. This is a binomial experiment because there are two mutually exclusive outcomes for each​ trial, there is a fixed number of​ trials, the outcome of one trial does not affect the outcome of​ another, and the probability of success changes in each trial.
D. This is a binomial experiment because there are two mutually exclusive outcomes for each​ trial, there is a fixed number of ​trials, the outcome of one trial does not affect the outcome of ​another, and the probability of success is the same for each trial.
2) Find and interpret the probability that exactly 15 of them are satisfied with the airlines.

Answer:

h = 7 degrees

Step-by-step explanation:

To find h, we know that it is positive because it increases in value, not decreases:

h = 65 - 58

h = 7

Answer:

h = 7°F

Step-by-step explanation:

58 + h = 65

h = 65 - 58

h = 7

Check:

68 + 7 = 65

Answer:

C : A salesperson earns $50 plus $10 for every $100 of merchandise he sells.

Step-by-step explanation:

If a salesperson earns $50 plus $10 for every $100 of merchandise he sells, the rate of change is 100. The linear equation is T = 50 + 100h, where T is the total amount he earns and h is the number of $100 in merchandise he sells.

The example that represents the constant rate will be a salesperson who earns $50 plus $10 for every $100 of merchandise he sells. Then the correct option is C.

It is the average amount by which the function varied per unit throughout that time period. It is calculated using the gradient of the line linking the interval's ends on the graph depicting the function.

Let's check all the options, then we have

A: You drive from Colorado to Texas. In the first 4 hours, you cover 240 miles, and in the second 5 hours, you cover another 240 miles. It is an example of a linear function but the slope gets changed after 2 hours.

B: The money you put in the bank earns 5% Interest. This means that the bank pays you 5% of the amount of the money kept in the bank each year. It is an example of the exponential function.

C: A salesperson earns $50 plus $10 for every $100 of merchandise he sells. It is an example of a linear function.

D: The number of bacteria doubles every hour.  It is an example of the exponential function.

The example that represents the constant rate will be a salesperson who earns $50 plus $10 for every $100 of merchandise he sells. Then the correct option is C.

More about the average rate change link is given below.

https://brainly.com/question/28744270

#SPJ5

Hey there! I'm happy to help!

Let's set this up as a system of equations, where x is equal to the number of 10 dollar bills and y is equal to the number of 50 dollar bills.

10x+50y=1080

x+y=28

We want to solve for x or y. We can rearrange the second equation to find the value of one of the variables.

x+y=28

Subtract x from both sides.

y=28-x

Now, we have a value for y. So, we could replace the y in the first equation with 28-x and the solve for x.

10x+50(28-x)=1080

We use distributive property to undo the parentheses.

10x+1400-50x=1080

We combine like terms.

-40x+1400=1080

We subtract 1400 from both sides.

-40x=-320

We divide both sides by -40.

x=8

Since there are 28 total bills, this means that there must be 20 50 dollar ones because there are 8 10 dollar bills.

Have a wonderful day! :D

Answer:

-5 < x < 0

Step-by-step explanation:

Answer:

3057.6 cm³

Step-by-step explanation:

You have a cylinder and a rectangular prism.  Solve for the area of each separately.

Cylinder

The formula for volume of a cylinder is V = πr²h.  The radius is 7, and the height is 7.

V = πr²h

V = π(7)²(7)

V = π(49)(7)

V = 343π

V = 1077.57 cm³

Rectangular Prism

The formula for volume of a rectangular prism is V = lwh.  The length is 20, the width is 11, and the height is 9.

V = lwh

V = (20)(11)(9)

V = (220)(9)

V = 1980 cm³

Add the areas of the two shapes.

1077.57 cm³ + 1980 cm³ = 3057.57 cm³

Round to the nearest tenth.

3057.57 cm³ ≈ 3057.6 cm³

Answer:

366 Minutes

Step-by-step explanation:

Answer: options 2,3and 6

Answer:

option

2-Twelve students answered Mr. Chiu’s question.

3-Three people studied for two hours.

6-Four people studied for four or more hours.

Step-by-step explanation:

hope this helps:)

Answer:

Pretty sure it is c

Step-by-step explanation:

Answer:

C.

Step-by-step explanation:

She will be painting the outsides of the table, so we need to find the surface area of the table.

There is the flat part of the table, which is a rectangular prism. There are also four legs, which are rectangular prism.

So, she will paint C. the surface area of 6 rectangular prisms.

Hope this helps!

Answer:

x = 88

Step-by-step explanation:

The sum of the angles in a triangle add to 180

47+45 +x = 180

Combine like terms

92+x = 180

Subtract 92 from each side

92+x-92= 180-92

x =88

Answer:

Step-by-step explanation:

Can you please include a image?

Thanks!!!

Answer:

The Central Limit Theorem says that if the sample size is more than 30, the data follows a normal sampling distribution. Since the sample size is 180, and that is more than 30, a Normal sampling distribution can be used.

Since a normal sampling distribution can be used, we should FAIL TO REJECT the null hypothesis because p = 0.20, which is more than the significance level of α = 0.08. There is NOT sufficient evidence to suggest that the alternative hypothesis is true.

Hope this helps!

Similar triangles have side lengths that are proportional to each other. To find each of the missing lengths, we need to set up proportions.

The proportions will look as follows:

(length or unknown of triangle 1) / (length or unknown of triangle 2) = (length of triangle 1) / (length of triangle 2)

-On both sides, remember to be consistent with which length/unknown you put on top! If a triangle 1 length is the numerator on the left, then it also needs to be the numerator on the right! And this also works vice versa with triangle 2.

In each proportion equation, we can only have one unknown. On the left side of the equation, we choose one length or unknown of triangle 1, and the corresponding side length of unknown of triangle 2 (whichever you did not choose from triangle 1). On the right side of the equation, we use a completed proportion. This is because all of the sides of one triangle are proportional to the other triangle, but we need to know that proportion/ratio in order to find other side lengths.

Let's start with problem a, to show how this works:

Triangle 1 side lengths - 16, a, 11

Triangle 2 side lengths - 8, 3, b

As you can tell, the side lengths match up (corresponding!) on each triangle, as in they are in the same position on each triangle. Now, we will set up a proportion to find the length of side a on triangle 1.

a / 3 = 16 / 8

48 = 8a

a = 6

Next, let's find the length of side b on triangle 2.

11 / b = 16 / 8

16b = 88

b = 5.5

Moving on to problem b, we'll apply the same concept and steps from problem a in order to find the missing side lengths.

Triangle 1 side lengths: 5, 5.5, d

Triangle 2 side lengths: 15, c, 18

5 / 15 = 5.5 / c

5c = 82.5

c = 16.5

5 / 15 = d / 18

15d = 90

d = 6

Hope this helps!! :)

Answer:

On a) you can see the shapes are simular. The blue line signatures that they are equal just reduced. You can see that 8 goes into 16 two times so for the orange line 3 must times 2. Which would mean a is 6. Now on the red line all you see is 11. So divide 11 by 2 and your answer should be 5.5 for b.

On b) it is the same thing but you have to find how the blue line is divisible. 5 divided by 15 is 3. So 3 is the number you will be using to divide or multiply. For the orange line you divide 18 by 3. The answer is 6 for d. For the red line 5.5 times 3 and you should get 11 for c.

Step-by-step explanation:

Hope this helped

Answer:

8.5cm

Step-by-step explanation:

convert 3.4metres to cm that is by multiplying by 100

3.4×100=340cm

1rep 40

?rep 340

that is 340/40

=8.5cm

Answer:

8.5 cm

Step-by-step explanation:

Scale = 1:40

Length of the room = 3.4 meters

3.4 meters =3.4 X 100 =340 cm

Since 1 unit on the diagram represents 40 units

The length of the diagram

[tex]=\dfrac{340}{40}\\\\=8.5$ cm[/tex]

The length of the room on the diagram is 8.5 cm.

Answer:

a) Mean = 4.55

   Median = 4.7

   Mode = 1.9

b) S =  2.3952

   CV = 52.64 %

   Range = 6.3

c) Yes, since the average and median values are both over "acceptable" ranges.

Step-by-step explanation:

Explanation is provided in the attached document.

Answer:

my best answer for this is B. False.

I calculated as fast as i can.

Answer:

No solutions

Step-by-step explanation:

14(z + 3) = 14z + 21

Expand brackets.

14z + 42 = 14z + 21

Subtract 14z on both sides.

42 = 21

There are no solutions.

Answer:

No solution

Step-by-step explanation:

First, We have to simplify the right side.

Distribute 14, 14z+42.

Now the equation stands as 14z+42=14z+21

Subtract 14z from both sides,

this makes it 42=21.

We know when the solution is #=#, our answer is no solution.

Answer:

No correlation

Step-by-step explanation:

Hey there! :)

This has no correlation because all the points are spread out throughout the graph making no correlation.

Answer:

D no correlation

Step-by-step explanation:

too many scattered dot all over the place if its some going up down its NO CORRELATION!!!

An outlier in statistics is a data point that deviates considerably from other observations. The given data set has no outlier.

An outlier in statistics is a data point that deviates considerably from other observations. An outlier can be caused by measurement variability or by experimental mistake; the latter is sometimes eliminated from the data set.

To find the outlier for the given data set follow the given steps.

Step one: The first step is to find the quartiles for the data set.

For this data set, the quartiles are:

Q1 = 45.5

Q3 = 62.5

Step Two: Find the Interquartile Range

The interquartile range is the difference between the first and third quartiles.

IQR = Q3 - Q1

IQR = 45.5 - 62.5

IQR = 17

Step Three:

The next step is to set up a fence beyond the first and third quartiles using the interquartile range.

Lower Fence = Q1 - (1.5 × IQR)

Lower Fence = 45.5 - (1.5 × 17)

Lower Fence = 20

Upper Fence = Q3 + (1.5 × IQR)

Upper Fence = 62.5 + (1.5 × 17)

Upper Fence = 88

Step Four: Find the Outliers

Any numbers in the data that are above or below the fences are outliers.

Since there are no numbers outside the two fences. Hence, it can be concluded that the given data set does not have, any outlier.

Learn more about Outlier:

https://brainly.com/question/26958242

#SPJ2

Answer:

Step-by-step explanation:

The surface area of a cone is:

● Sa = Pi*r^2 +Pi*r*l

r is the radius and l is the slant heigth

The diameter of this cone is 12 inches so the radius is 6 (12/2=6).

●Sa = Pi*36 +Pi*6*10

●Sa = 301.59 in^2

Answer:

pi (6) * 10+ pi ( 6)^2

Step-by-step explanation:

The surface area of a cone is given by

SA =  pi rl +pi r^2  where r is the radius and l is the slant height

We know the diameter is 12 so the radius is 12/2 = 6

SA =  pi (6) * 10+ pi ( 6)^2

Answer:

b. -1/6

Step-by-step explanation:

slope = (difference in y)/(difference in x)

slope = (1 - 0)/(-2 - 4) = 1/(-6) = -1/6

Answer:

m = -1/6 = B

Step-by-step explanation:

[tex]m = \frac{y_2-y_1}{x_2-x_1} \\ x_1=4\\ y_1=0\\ x_2=-2\\y_2=1.\\m = \frac{1-0}{-2-4} \\m = \frac{1}{-6}[/tex]

According to the given situation, the computation of two number in a given ratio is shown below:-

We assume the numbers is x and y

Given that

[tex]\frac{x}{y} = \frac{3}{1}[/tex]

x = 3y

and

[tex]\frac{x^2-y^2}{x + y} = \frac{6}{1} \\\\\frac{(x + y) (x - y)}{(x + y)} = 6[/tex]

With the help of above formula we will put the value and be able to find the values of x and y

x - y = 6

3y - y = 6

2y = 6

y = 3

x = 3y = 9

x = 9, y = 3

Therefore the correct answer is x = 9 where as y = 3

Range is [tex]y\in[-3,+\infty)[/tex].

Hope this helps.

Answer:

C. μ = 3.60

Step-by-step explanation:

Two tables have been attached to this response.

One of the tables contains the given data and distribution with two columns: Houses Sold and Probability

The other table contains the analysis of the data with additional columns: Frequency and Fx

=> The Frequency(F) column is derived from the product of the probability of each item in the Houses sold column and the total number of houses sold (which is 28). For example,

When the number of houses sold = 0

F = P(0) x Total number of houses sold

F = 0.24 x 28 = 6.72

When the number of houses sold = 1

F = P(1) x Total number of houses sold

F = 0.01 x 28 = 0.28

=> The Fx column is found by multiplying the Frequency column by the Houses Sold column. For example,

When the number of houses sold = 0

Fx = F * x

F = 6.72 x 0 = 0

Now to get the mean, μ we use the relation;

μ = ∑Fx / ∑F

Where;

∑Fx = summation of the items in the Fx column = 100.8

∑F = summation of the items in the Frequency column = 28

μ = 100.8 / 28

μ = 3.60

Therefore, the mean of the given probability distribution is 3.60

The mean of the discrete probability distribution is given by:

C. μ = 3.60

The expected value of a discrete distribution is given by the sum of each outcome multiplied by it's respective probability.

In this problem, the table x - P(x) gives each outcome and their respective probabilities, hence, the mean is:

[tex]E(X) = 0(0.24) + 1(0.01) + 2(0.12) + 3(0.16) + 4(0.01) + 5(0.14) + 6(0.11) + 7(0.21) = 3.6[/tex]

Hence option C is correct.

More can be learned about the mean of discrete distributions at https://brainly.com/question/24855677

Answer:

The  99%  confidence interval is

                     [tex]37.167< \= x < 44.833[/tex]

Step-by-step explanation:

From the question we are told that

  The sample size is  [tex]n = 29[/tex]

  The  sample mean is  [tex]\= x =[/tex]$41

  The  sample standard deviation is  [tex]\sigma =[/tex]$8

   The  level of confidence is [tex]C =[/tex]99%

Given that the confidence level id  99% the level of confidence is evaluated as

        [tex]\alpha = 100 - 99[/tex]

        [tex]\alpha = 1[/tex]%

Next we obtain the critical value of [tex]\frac{\alpha }{2}[/tex] from the normal distribution table which is  

      [tex]Z_{\frac{\alpha }{2} } = 2.58[/tex]

The reason we are obtaining values for  is because  is the area under the normal distribution curve for both the left and right tail where the 99% interval did not cover while   is the area under the normal distribution curve for just one tail and we need the  value for one tail in order to calculate the confidence interval

Next we evaluate the margin of error which is mathematically represented as

          [tex]MOE = Z_{\frac{\alpha }{2} } * \frac{\sigma }{\sqrt{n} }[/tex]

substituting values

         [tex]MOE = 2.58 * \frac{8 }{\sqrt{29} }[/tex]

           [tex]MOE = 3.8328[/tex]

The 99% confidence level is constructed as follows

      [tex]\= x - MOE < \= x < \= x + MOE[/tex]

substituting values

    [tex]41 - 3.8328 < \= x < 41 + 3.8328[/tex]

     [tex]37.167< \= x < 44.833[/tex]

Answer:

1,-1,3,4

1,6,-2,-4

-4,6,-6,6

Step-by-step explanation:

I believe you just put in the values into the box. Watch the video to see how they did it to make sure it looks like how I did it.

Answer:

(11π/9 )ft/s

Step by step Explanation

Let us denote the height as h ft

But we were told that The diameter of the base of the cone is approximately three times the altitude, then

Let us denote the diameter = 3h ft, and the radius is 3h/2

The volume of the cone is

V = (1/3)π r^2 h

Then if we substitute the values we have

= (1/3)π (9h^2/4)(h) = (3/4)π h^3

dV/dt = (9/4)π h^2 dh/dt

We were given as 22feet and rate of 8 cubic feet per minute

h = 22

dV/dt = 8

8= (9/4)π (22) dh/dt

= 11π/9ft/s

Therefore, the rate is the height of the pile changing when the pile is 22 feet is

11π/9ft/s

Answer:

3¾

Step-by-step explanation:

Geometric sequence also known as geometric progression, can be said to be a sequence with a constant ratio between the terms.

Formula for geometric sequence:

[tex] a^n = a ( n-1 ) * r [/tex]

Given:

First term, a1 = 30

ratio, r = ½

Required:

Find the fourth term

Where, the first term, a¹ = 30

Second term: a² = 30 * ½ = 15

Third term: a³ = 15 * ½ = 7.5

Fourth term: a⁴ = 7.5 * ½ = 3.75 = 3¾

Therfore the fourth term of the geometric sequence is 3¾

Answer:

The answer is:

The fourth option,

{s | s <90}

Step-by-step explanation:

yes

Answer:

[tex]\boxed{s|s<90}[/tex]

Step-by-step explanation:

1/3s-6<24

Add 6 on both sides.

1/3s<30

Multiply both sides by 3.

s<90

Answer:

[tex]Mean = 344[/tex]

Step-by-step explanation:

Given

[tex]Population = 1013[/tex]

Let p represents the proportion of those who worry about identity theft;

[tex]p = 66\%[/tex]

Required

Mean of those who do not worry about identity theft

First, the proportion of those who do not worry, has to be calculated;

Represent this with q

In probability;

[tex]p + q = 1[/tex]

Make q the subject of formula

[tex]q = 1 - p[/tex]

Substitute [tex]p = 66\%[/tex]

[tex]q = 1 - 66\%[/tex]

Convert percentage to fraction

[tex]q = 1 - 0.66[/tex]

[tex]q = 0.34[/tex]

Now, the mean can be calculated using:

[tex]Mean = nq[/tex]

Where n represents the population

[tex]Mean = 1013 * 0.34[/tex]

[tex]Mean = 344.42[/tex]

[tex]Mean = 344[/tex] (Approximated)

Answer:

C.

Step-by-step explanation:

It's the most reasonable answer.