Baseball Field Problem
Find the amount of fencing, dirt, and sod needed to rebuild the baseball field.
380 to the fence
G'
is
Grass
87
Cr=10
Gras
Grass
Note: Not drown to sale
Fence
Dut
IS'

All of these ratios are equal to b, and we have shown that there is a constant ratio between consecutive output values.

The common ratio is the ratio that remains constant between successive function output values. The behaviour of a geometric sequence, which is a series of numbers where each term is produced by multiplying the one before it by a set number (the common ratio), depends on the common ratio. The sequence is rising exponentially if the common ratio is bigger than 1. The sequence decreases exponentially if the common ratio is between 0 and 1.

To show that the function form shows a constant ratio we take:

[tex](x+1) / f(x) = (ab^{(x+1)}) / (ab^x) = b[/tex]

Similarly, we have:

[tex]f(x+2) / f(x+1) = (ab^{(x+2)}) / (ab^{(x+1)}) = b[/tex]

Hence, all of these ratios are equal to b, and we have shown that there is a constant ratio between consecutive output values.

Learn more about ratio here:

https://brainly.com/question/29774220

#SPJ1

For a normal distribution ,a positive value of z simply means that the observation or sample mean is above the population mean this implies

none of the options provided is completely accurate.

All the observations must have had positive values,

It is not necessarily true for a positive value of z.

The value of z indicates how many standard deviations away from the mean a particular observation or sample mean is.

A positive value of z simply means that the observation or sample mean is above the population mean.

The area corresponding to the z is either positive or negative,

It is also not accurate.

The area under the normal curve corresponds to probabilities, not positive or negative values.

The area to the right of the mean corresponds to positive z-values, and the area to the left of the mean corresponds to negative z-values.

The sample mean is smaller than the population mean,

It is a possibility when the z-value is negative, indicating that the sample mean is below the population mean.

The sample mean is larger than the population mean,

It is a possibility when the z-value is positive, indicating that the sample mean is above the population mean.

Therefore, the sample mean can be either larger or smaller than the population mean depending on the direction of the z-value.

Learn more about population mean here

brainly.com/question/29064364

#SPJ4

Since cosine is negative and a is in quadrant III, we know that sine is positive. We can use the Pythagorean identity to solve for sine:

sin^2(a) + cos^2(a) = 1

sin^2(a) + (-5/9)^2 = 1

sin^2(a) = 1 - (-5/9)^2

sin^2(a) = 1 - 25/81

sin^2(a) = 56/81

Taking the square root of both sides:

sin(a) = ±sqrt(56/81)

Since a is in quadrant III, sin(a) is positive. Therefore:

sin(a) = sqrt(56/81) = (2/3)sqrt(14)

The logical assumption used is: An arithmetic sequence is a set of discrete values, whereas a line is a continuous set of values.

An arithmetic sequence is a set of numbers where, with the exception of the first term, each term is obtained by adding a fixed constant to the term before it. Every pair of following terms in the sequence has the same fixed constant, which is known as the common difference. A1 stands for the first term in an arithmetic sequence, while an is used to represent the nth term.

A solid line symbolises continuous numbers, whereas the classmate's logical presumption is that an arithmetic series comprises of discrete values. This presumption is untrue, though, as a line can effectively represent an arithmetic series.

Learn more about arithmetic sequence here:

https://brainly.com/question/29616017

#SPJ1

To determine if each ordered pair is a point of intersection between the line x - y = 6 and the circle y² - 26 = -x², we need to substitute the values of x and y in both equations and see if they are true for both.

For the ordered pair (1, -5):

x - y = 6 becomes 1 - (-5) = 6, which is true.

y² - 26 = -x² becomes (-5)² - 26 = -(1)², which is false.

Therefore, (1, -5) is not a point of intersection.

For the ordered pair (1, 5):

x - y = 6 becomes 1 - 5 = -4, which is false.

y² - 26 = -x² becomes (5)² - 26 = -(1)², which is true.

Therefore, (1, 5) is a point of intersection.

For the ordered pair (5, -1):

x - y = 6 becomes 5 - (-1) = 6, which is true.

y² - 26 = -x² becomes (-1)² - 26 = -(5)², which is false.

Therefore, (5, -1) is not a point of intersection.

So the answer is:

(1,-5) - No

(1,5) - Yes

(5,-1) - No

to know more about equations

brainly.com/question/29657983

#SPJ1

Answer: there is only one number

Answer:

Solo hay un número primo que se puede escribir como suma de dos números primos y también como diferencia de dos números primos.

Espero haber ayudado :D

Equation that represents the total number of minutes y Emily studied for the math exam is y = 40 +x.

We can represent the total number of minutes Emily studied for the math exam using the equation,

y = 40 + x

Here, 'y' represents the total number of minutes Emily studied for the math exam, '40' represents the number of minutes she studied in the morning, and 'x' represents the number of minutes she studied later that evening.

By adding the number of minutes studied in the morning to the number of minutes studied later that evening, we can calculate the total number of minutes Emily studied for the math exam.

To learn more about Equation here:

https://brainly.com/question/29147854

#SPJ4

The two column proof is written as follows

Statement                                                           Reason

MA = XR                                           given (opposite sides of rectangle)

MK = AR                                           given (opposite sides of rectangle)

arc MA = arc RK                               Equal chords have equal arcs

arc MK = arc AK                               Equal chords have equal arcs

An arc is a portion of the circumference of a circle, and a chord is a line segment that connects two points on the circumference.

If two chords in a circle are equal in length, then they will cut off equal arcs on the circumference. This is because the arcs that the chords cut off are subtended by the same central angle.

Learn more on circle theorem at:

https://brainly.com/question/6240879

#SPJ1

It depends on the rotational speed of the wheel. To calculate this speed, we need to know the angular velocity of the wheel.

The maximum speed of a point on the outside of the wheel, 15 cm from the axle, if we assume that the wheel is rotating at a constant rate, we can use the formula v = rω, where v is the speed of the point on the outside of the wheel, r is the radius of the wheel (15 cm in this case), and ω is the angular velocity of the wheel. Therefore, the maximum speed of a point on the outside of the wheel would be directly proportional to the angular velocity of the wheel.
The formula to calculate the maximum linear speed (v) is:
v = ω × r
where v is the linear speed, ω is the angular velocity in radians per second, and r is the distance from the axle (15 cm, or 0.15 meters in this case).
Once you have the angular velocity (ω) of the wheel, you can plug it into the formula and find the maximum speed of a point on the outside of the wheel.

Learn more about rotational speed here: brainly.com/question/17025846

#SPJ11

Answer:

see the images and explanation

Step-by-step explanation:

for the graph:

the domain 0 < x < 5

the range for each functions:

g(x) = 2x + 1

g(x) = y  ,   1 < y < 11

h(x) = 2x + 2 ,  2 < y < 12

The MAD of the hourly wages given would be $ 0.48. The range would be $ 2.00. Q1 would be $8.25. Q3 would then be $9.25. The IQR would be $1.00

Calculate the MAD:

First, find the mean of the data set:

mean = (sum of all values) / (number of values)

mean = (8.25 + 8.50 + 9.25 + 8.00 + 10.00 + 8.75 + 8.25 + 9.50 + 8.50 + 9.00) / 10

mean = 88.00 / 10 = 8.80

Then, find the mean of these absolute deviations:

MAD = (sum of absolute deviations) / (number of values)

MAD = (0.55 + 0.30 + 0.45 + 0.80 + 1.20 + 0.05 + 0.55 + 0.70 + 0.30 + 0.20) / 10

MAD = 4.10 / 10 = 0.41

Calculate the range:

range = maximum value - minimum value

range = 10.00 - 8.00 = 2.00

Find Q1 and Q3:

{8.00, 8.25, 8.25, 8.50, 8.50, 8.75, 9.00, 9.25, 9.50, 10.00}

Q1 is the median of the lower half, and Q3 is the median of the upper half.

Lower half: {8.00, 8.25, 8.25, 8.50, 8.50}

Upper half: {8.75, 9.00, 9.25, 9.50, 10.00}

Q1 = median of lower half = 8.25

Q3 = median of upper half = 9.25

Calculate the IQR:

IQR = Q3 - Q1

IQR = 9.25 - 8.25 = 1.00

Find out more on MAD at https://brainly.com/question/3250070

#SPJ1

Answer:

The Correct answer is sinA/3.2=sin110°/4.6

I gotchu <3

Since the vertex is (0, -3), the quadratic function can be written in vertex form as:

f(x) = a(x - 0)^2 - 3

Where 'a' is a constant that determines the shape of the parabola. Since the end behavior of the function is y --> - Infinite as x --> - infinite and y --> - Infinite as x --> + infinite, the leading coefficient 'a' must be negative.

So, f(x) = -a(x^2 - 0x) - 3

Now, using the given point (1, -7) on the parabola, we can substitute the coordinates into the function and solve for 'a'.

-7 = -a(1^2 - 0(1)) - 3

-7 = -a - 3

a = 10

Therefore, the quadratic function that satisfies the given characteristics is:

f(x) = -10x^2 - 3

Hope this helps :)

To compute the covariance matrix of the variables in the data, the "matrix-operation" which should be used is ([tex]X^{t}[/tex] × X)/n.

The "Covariance" matrix is defined as a symmetric and positive semi-definite, with the entries representing the covariance between pairs of variables in the data.

The "diagonal-entries" represent the variances of individual variables, and the off-diagonal entries represent the covariances between pairs of variables.

Step(1) : Compute the transpose of the centered data matrix X, denoted as [tex]X^{t}[/tex]. The "transpose" of a matrix is found by inter-changing its rows and columns.

Step(2) : Compute the "dot-product" of [tex]X^{t}[/tex] with itself, denoted as [tex]X^{t}[/tex] × X.

The dot product of two matrices is computed by multiplying corresponding entries of the matrices and summing them up.

Step(3) : Divide the result obtained in step(2) by the number of samples in the data, denoted as "n", to get the covariance matrix.

This step scales the sum of the products by 1/n, which is equivalent to taking the average.

So, the covariance matrix "C" of variables in "centered-data" matrix X can be expressed as: C = ([tex]X^{t}[/tex] × X)/n.

Learn more about Covariance Matrix here

https://brainly.com/question/30481066

#SPJ4

The given question is incomplete, the complete question is

Let X be a matrix of centered data with a column for each field in the data and a row for each sample. Then, not including a scalar multiple, how can we use matrix operations to compute the covariance matrix of the variables in the data?

Step-by-step explanation:

Again, using similar triangle ratios

7.2 m  is to 2.4 m  

     as   AB is to  12.0 m

7.2 / 2.4  = AB/12.0    Multiply both sides of the equation by 12

12 *   7.2 / 2.4   = AB = 36.0 meters

The cube roots of 216 written in the rectangular (standard) form are 3 + 3√3, -3+3√3, and 6.

In mathematics, the cube root formula is used to represent any number as its cube root, for example, any number x will have the cube root 3x = x1/3. For instance, 5 is the cube root of 125 as 5 5 5 equals 125.

3√216 = 3√(2x2x2)x(3x3x3)

= 2 x 3 = 6

the prime factors are represented as cubes by grouping them into pairs of three. As a result, the necessary number, which is 216's cube root, is 6.

Therefore, the cube roots of 216 are 3 + 3√3, -3+3√3, and 6.

Learn more about cube root, here:

https://brainly.com/question/31153573

#SPJ1

Therefore , the solution of the given problem of unitary method comes out to be during the 4-second period, the tram's elevation changed by 3 metres every second.

To complete the assignment, use the iii . -and-true basic technique, the real variables, and any pertinent details gathered from basic and specialised questions. In response, customers might be given another opportunity to sample expression the products. If these changes don't take place, we will miss out on important gains in our knowledge of programmes.

Here,

By dividing the overall elevation change (12 metres) by the total time required (4 seconds),

it is possible to determine the change in the tram's elevation every second. We would then have the average rate of elevation change per second.

=> Elevation change equals 12 metres

=> Total duration: 4 seconds

=>  12 meters / 4 seconds

=> 3 meters/second

As a result, during the 4-second period, the tram's elevation changed by 3 metres every second.

To know more about unitary method  visit:

https://brainly.com/question/28276953

#SPJ1  

The missing angles of the diagram are:

∠1 = 118°

∠2 = 62°

∠3 = 118°

∠4 = 30°

∠5 = 32°

∠6 = 118°

∠7 = 30°

∠8 = 118°

Supplementary angles are defined as two angles that sum up to 180 degrees. Thus:

∠1 + 62° = 180°

∠1 = 180 - 62

∠1 = 118°

Now, opposite angles are congruent and ∠2 is an opposite angle to 62°. Thus: ∠2 = 62°.

Similarly: ∠3 = 118° because it is congruent to ∠1

Alternate angles are congruent and ∠5 is an alternate angle to 32°. Thus:

∠5 = 32°

Sum of angle 4 and 5 is a corresponding angle to ∠2 . Thus:

∠4 + ∠5 = 62

∠4 + 32 = 62

∠4 = 30°

This is an alternate angle to ∠7 and as such ∠7 = 30°

Sum of angles on a straight line is 180 degrees and as such:

∠8 = 180 - (30 + 32)

∠8 = 118° = ∠6 because they are alternate angles

Read more about Missing Angles at: https://brainly.com/question/28293784

#SPJ1

The resultant value of the given expression x² + 10x + 24 when x = 3 is (C) 63.

A finite collection of symbols that are properly created in line with context-dependent criteria is referred to as an expression, sometimes known as a mathematical expression.

Expressions in writing are made using mathematical operators such as addition, subtraction, multiplication, and division.

For instance, "4 added to 2" will have the mathematical formula 2+4.

So, we have the expression:

= x² + 10x + 24

Now, solve when x = 3 as follows:

= x² + 10x + 24

= 3² + 10(3) + 24

= 9 + 30 + 24

= 63

Therefore, the resultant value of the given expression x² + 10x + 24 when x = 3 is (C) 63.

Know more about expressions here:

https://brainly.com/question/723406

#SPJ1

Correct question:

Evaluate the expression when x = 3.

x² + 10x + 24

a. 81

b. 86

c. 63

d. 60

Answer:

Jaxon made 11 free throws over the season.

Step-by-step explanation:

If he made 5% of his free throws, we know that he will make 5% of the total number of free throws he took, which is 220:

We multiply 220 by 0.05, or 5% to find out how many free throws he made:

220*0.05 = 11

After that, we now know that Jaxon made 11 of his free throws out of 220 over the course of the season, or 5%.

The distribution in which variable x has binomial distribution are as follow,

Option A) When the medicine is tried with two patients, X is the number of patients for whom the medicine worked.

Option D) When the medicine is tried with six patients, X is the number of patients for whom the medicine worked.

When the medicine is tried with two patients, X is the number of patients for whom the medicine worked.

This variable X follows a binomial distribution .

Because there are two independent trials two patients.

With a constant probability of success 30%.

And the outcome of one trial doesn't affect the outcome of the other.

When the medicine is tried with six patients, X is the number of patients for whom the medicine does not work.

This variable X does not follow a binomial distribution.

Because the probability of success is not constant it's the complement of 30%, which is 70%.

Also, the outcome of one trial affects the outcome of the other trials.

As there are only six patients .

Number of patients for whom medicine does not work depends on number of patients for whom it worked.

When the medicine is tried with six patients, X is the number of patients for whom the medicine worked.

This variable X follows a binomial distribution.

Because there are six independent trials six patients with a constant probability of success (30%) .

The outcome of one trial doesn't affect the outcome of the other.

When the medicine is tried with two patients, X is the number of doses each patient needs to take.

This variable X does not follow a binomial distribution.

Because it's not a count of successes out of a fixed number of independent trials.

But rather a continuous variable that can take any non-negative value.

Learn more about binomial distribution here

brainly.com/question/12702509

#SPJ4

The above question is incomplete, the complete question is:

For a certain type of hay fever, Medicine H has a 30% probability of working.

In which distributions does the variable X have a binomial distribution?

Select EACH correct answer.

A. When the medicine is tried with two patients, X is the number of patients for whom the medicine worked.

B. When the medicine is tried with six patients, X is the number of patients for whom the medicine does not work.

C. When the medicine is tried with six patients, X is the number of patients for whom the medicine worked.

D. When the medicine is tried with two patients, X is the number of doses each patient needs to take.

Number of red counters in the original bag is 3, and the number of green counters is 7.

Let's use algebra to solve the problem. Let U be the number of red counters and G be the number of green counters originally in the bag.

From the first part of the problem, we know that

Probability (selecting a green counter) = G / (U + G) = 3/7

Solving for U in terms of G, we get

U = (7G - 3G) / 3 = 4G/3

So we know that there were 4G/3 red counters and G green counters in the bag originally. But since the number of counters must be a whole number, we can assume that there were 4R red counters and 3G green counters originally, where R and G are both integers and R + G is the total number of counters.

After adding 2 red and 3 green counters, the number of counters in the bag is now R + 2 + G + 3 = R + G + 5.

From the second part of the problem, we know that

P(selecting a green counter) = (G + 3) / (R + G + 5) = 6/13

Solving for R in terms of G, we get

R = (13G - 9G - 15) / 7 = 4G/7 - 15/7

Since R must be an integer, we can try different values of G to see if R is an integer. For example, if G = 7, then R = 3 and the total number of counters is 10.

Learn more about probability here

brainly.com/question/11234923

#SPJ4

The given question is incomplete, the complete question is:

There are only U red counters and G green counters in a bag. A counter is taken at random from the bag. The probability that the counter is green is 3/7. The counter is put back in the bag. 2 more red counters and 3 more green counters are put in the bag. A counter is taken at random from the bag. The probability that the counter is green is 6/13. Find the number of red counters and the number of green counters that were in the bag originally

The surface area of the cylinder is approximately 94.2 ft².

Surface area refers to the total area of the external or outer part of an object. It is the sum of the areas of all the individual surfaces or faces of the object. Surface area is typically measured in square units, such as square inches (in²), square feet (ft²), or square meters (m²), depending on the unit of measurement used.

According to the given information:

The surface area of a cylinder is the sum of the lateral surface area (the curved surface) and the area of the two circular bases.

The formula for the lateral surface area of a cylinder is given:

Lateral Surface Area = 2πrh

where r is the radius of the cylinder and h is the height of the cylinder.

Plugging in the given values for the radius (r = 3 ft) and height (h = 2 ft), we can calculate the lateral surface area:

Lateral Surface Area = 2π * 3 * 2 = 12π ft²

The formula for the area of a circle (which represents the bases of the cylinder) is given:

Circle Area = πr²

Plugging in the given value for the radius (r = 3 ft), we can calculate the area of each circular base:

Circle Area = π * 3² = 9π ft²

Since there are two bases in a cylinder, we multiply this by 2 to account for both bases:

2 * Circle Area = 2 * 9π = 18π ft²

Now, we can add the lateral surface area and the area of the two bases to find the total surface area of the cylinder:

Total Surface Area = Lateral Surface Area + 2 * Circle Area

= 12π + 18π

= 30π ft²

As a decimal rounded to the nearest tenth, the surface area of the cylinder is approximately 94.2 ft²

To know more about surface area visit: https://brainly.com/question/22074027

#SPJ1

According to the investment, after 15 years, the balance in the account would be $1185.

To calculate the final balance after 15 years, we can use the formula for simple interest:

Simple Interest = Principal x Interest Rate x Time

In this case, the principal is $600, the interest rate is 6.5%, and the time is 15 years.

Simple Interest = $600 x 0.065 x 15

Simple Interest = $585

So the investment of $600 earns $585 in simple interest over 15 years. To find the final balance, we add the interest earned to the initial investment:

Final Balance = Principal + Simple Interest

Final Balance = $600 + $585

Final Balance = $1185

To know more about investment here

https://brainly.com/question/365124

#SPJ4

The statement that is true about Evan's expression is that it represents a linear function of the amount of medicine in his bloodstream, where the initial amount is 100 milligrams and the rate of change is -0.4 milligrams per minute.

What is the equivalent expression?

Equivalent expressions are expressions that perform the same function despite their appearance. If two algebraic expressions are equivalent, they have the same value when we use the same variable value.

The expression 100 - 0.4m represents the amount of medicine in Evan's bloodstream after m minutes, where the amount of medicine decreases by 0.4 milligrams each minute.

The coefficient of the variable m (-0.4) represents the rate of change of the amount of medicine in Evan's bloodstream per minute. It tells us that for every one minute that passes, the amount of medicine in his bloodstream decreases by 0.4 milligrams.

The constant term (100) represents the initial amount of medicine in Evan's bloodstream before the medicine starts to decrease.

Therefore, the statement that is true about Evan's expression is that it represents a linear function of the amount of medicine in his bloodstream, where the initial amount is 100 milligrams and the rate of change is -0.4 milligrams per minute.

To learn more about the equivalent expression visit:

https://brainly.com/question/2972832

#SPJ1

The current in the circuit when the resistance is 12 ohms is 40 amps.

What is fraction?

A fraction is a mathematical term that represents a part of a whole or a ratio between two quantities.

We can use the inverse proportionality formula to solve this problem, which states that:

current (in amps) x resistance (in ohms) = constant

Let's call this constant "k". We can use the information given in the problem to find k:

24 amps x 20 ohms = k

k = 480

Now we can use this constant to find the current when the resistance is 12 ohms:

current x 12 ohms = 480

current = 480 / 12

current = 40 amps

Therefore, the current in the circuit when the resistance is 12 ohms is 40 amps.

To learn more about fraction from the given link:

https://brainly.com/question/10354322

#SPJ1

Answer:

1

Step-by-step explanation:

First of all we use the "law of sines"

to get the measure/length we need the opposing angle of it of the side, now in this case the missing side is x

and its opposing angle is missing so using common sense, the sum of angles in the triangle is 180°

180°=70°+51°+ x

x = 180°-121°

=59°

Using law of sines:

(sides are represented by small letters/capital letters are the angles)

a/sinA= b/sinB= c/sinC

We have one given side which is "9"

so,

9/sin70= x/sin59

doing the criss-cross method,

9×sin59=sin70×x

9×sin59/sin70=x

x=8.2 (answer 1)

I hope this was helpful <3

Step-by-step explanation:

hope this will help you Thanks

The process time of the system is 32 min/unit.