Based on the free-body diagram, the net force acting on this wheelbarrow is {blank} N.

Answer:

Purpose: To observe how an object’s position and velocity change while it is moving with a constant acceleration.

Question: How does an object’s position and velocity change as the object accelerates?

Hypothesis: If the fan speed increases, then the acceleration of the cart increases, because a greater fan speed supplies more energy to move the cart.

Variables:

• Independent variable: fan speed

• Dependent variable: acceleration of the cart

• Controlled variables: mass

Materials:

• Cart with Fan (1 kg)

• CM ruler (1 cm)

• Stop watch (0.0 cm pe sec)

• Flag

Procedure:

1. Use the setup on “Force and Fan Carts” Gizmo.

2. First, put the fan speed on low and no friction surface.

3. Press the start button and record the final time when the cart crosses the finished line. Record on table B.

4. Then, click on the data tab to record the speed data, total distance, average velocity, and acceleration. Record on table A and B.

5. After, observe the position vs. time graph with the speed and line graph toggled. Record on table C.

6. Repeat steps 2-5 on fan speed on medium and high with no friction surface.

7. Next, reset and put fan speed on low.

8. Press start and pause on 4 seconds.

9. On the same trial turn off the fan speed and hit start again.

10. Observe the graph and write observations on table D.

Analysis and Conclusion:

In conclusion, my hypothesis matches the data, because the data shows that increasing the fan speed increases the acceleration of the cart. The trends for all fan speeds are linear slope for speed. The higher the fan speed, the less time it took for the cart to cross the finish line.

Data:

Explanation:

Sorry can’t copy and paste results

Answer:

for that pervious answer why cant we copy and paste?

Explanation:

Answer:

455,000 Pa

Explanation:

PV = nRT

If n is constant:

PV / T = PV / T

(101,325 Pa) (718 mL) / (273 K) = P (175 mL) / (26 + 273) K

P = 455,000 Pa

Answer:

a ) 19,536.72 J,

b ) ( About ) 84°C

Explanation:

a ) We can solve this problem assuming that the dishwater remains a constant 78°C the entire duration.

Q = mass of the glass [tex]*[/tex] specific heat of the glass

The mass of the glass is given by 401 g, the specific heat by 840 J / kg [tex]*[/tex] C. Respectively the change in temperature would be the difference between the temperature of the dishwater, and that of the glass. As we want the units in Joules, we need to first convert the 401 g ⇒ kilograms.

401 g = 401 / 1000 kg = 0.401 kg,

Q = 0.401 kg [tex]*[/tex] 840 J / kg 19,536.72 J

b ) We know that the specific heat capacity of water is 4.184 J / g [tex]*[/tex] C. As the final temperature will be common between each substance, we can make their respective heat absorbed, the same. Note that the heat capacity is given in J / g

0.023 kg = 0.023 [tex]*[/tex] 1000 = 23 g,

0.18 kg = 180 g

[tex]- ( 180 )( 4.184 )( x - 93 ) = 23( 4.184 )( x - 14 )[/tex],

[tex]-753.12x+70040.16=96.232x-1347.248[/tex],

[tex]-753.12x=96.232x-71387.408[/tex],

[tex]-849.352x=-71387.408[/tex],

[tex]\frac{-849.352x}{-849.352}=\frac{-71387.408}{-849.352}[/tex],

[tex]x=84.04926\dots[/tex]

The final temperature will be about 84°C

Answer:

It remains the same.

Explanation:

During physical change, the mass, number of atoms and number of molecules will remain the same.

Answer: A

Explanation:

After a chemical change, the total number of atoms of each elements stays the same.

According to the law of conservation of matter "During a chemical reaction, matter is neither created nor destroyed".

This law provides us with a good view into what happens to atoms after a chemical change.

Simply, since we know that atoms are not created nor destroyed, that means their number cannot increase nor decrease.

The simply remain the same.

This is why every chemical equation must be balanced.

Answer: 2858.7726N

Explanation:

Given that :

Charge 1 (q1) = -0.00125 C

Charge 2 (q2) = +0.00333 C

Distance (r) = 3.62 m

According to columb's Law: The magnitude of the force between any two charged objects :

Fe = (Kq1q2) / r^2

Coloumb's constant(k) = 9×10^9 Nm^2/C^2

Fe = (9×10^9 * 0.00125 * 0.00333) / 3.62^2

Fe = (0.0000374625 * 10^9) / 13.1044

Fe = 37462.5 / 13.1044

Fe = 2858.7726N

Answer:

2858.7726 N

Explanation:

acellus

Answer:

red, green, and blue.

Explanation:

The primary colors of light that combine to produce any color within the visible spectrum are red, green, and blue.

Answer:A

Explanation:glass window allow light in but trap the heat inside

Answer:

1.5 u

Explanation:

The range equation is:

R = u² sin(2θ) / g

When u = v, R = 2.25 R.

2.25 R = v² sin(2θ) / g

2.25 u² sin(2θ) / g = v² sin(2θ) / g

2.25 u² = v²

1.5 u = v

Answer:

A. lord kelvin

Explanation:

In 1848, Kelvin used this as a basis for an absolute temperature scale. He defined "absolute" as the temperature at which molecules would stop moving, or "infinite cold." From absolute zero, he used the same unit as Celsius to determine the increments.

Absolute zero cannot technically be achieved. However, scientists have been able to lower the temperature of matter to just a fraction of a Kelvin above absolute zero through techniques such slowing down particles using lasers.

Answer:

21

Explanation:

Answer: the best times to see it would be from 10 pm to 1 am, meaning when the night skies are dark and clear. The best months to see it would be from April to late August. Whereas the best places in the world to view them would be closer to the arctic circle, this includes Canada, Alaska, Iceland and Greenland.

Explanation:

Hope this helps

Auroras are created by disruptions in the magnetosphere induced by the solar wind. The greatest times to see it are between 10 p.m. and 1 a.m.

Auroras are created by disruptions in the magnetosphere induced by the solar wind. The paths of charged particles in the magnetospheric plasma are altered as a result of these disruptions.

These particles, primarily electrons, and protons fall to the upper atmosphere.

The greatest times to see it are between 10 p.m. and 1 a.m. when the night skies are dark and clear. It is recommended to visit between April and late August.

The greatest spots to see them are closer to the arctic circle, which encompasses Canada, Alaska, Iceland, and Greenland.

Hence the greatest times to see it are between 10 p.m. and 1 a.m.

To learn more about the aurora borealis refer to the link;

https://brainly.com/question/25766402

Answer:

Cools ; size

Explanation:

The rate at which magma cools determines the size of the crystals in the new rock. Igneous rocks are formed from the cooling and solidification of molten magma which finds its way to the surface or depth of very low pressure beneath the surface. This place or depth of cooling of magma affects the cooling rate and hence the size of the crystals formed. Igneous rocks formed at depths below the surface have more time to cool and allows more time for Crystal growth and hence produce coarse grained crystal grains called Intrusive igneous rocks which have significantly larger crystals than those formed on the surface which cools rapidly and allowing very little time for crystal growth giving rise to the formation of fine grained crystals and are called extrusive igneous rocks.

Answer:

A

Explanation:

Answer:

C. 110 - 140

Explanation:

Answer:

i think the best answer is c

Answer:

A. -50 m/s

Explanation:

Given

Velocity of Chairlift = +15m/s

Velocity of Skier = -35m/s

Required

Determine the velocity of the skier relative to the chairlift

Basically, relative velocity is the difference between the two velocities;

Having said that;

Relative velocity of the skier relative to the chairlift = Velocity of the Skier - Velocity of the Chairlift

Relative velocity of the skier relative to the chairlift = -35m/s - (+15m/s)

Open bracket

Relative velocity of the skier relative to the chairlift = -35m/s - 15m/s

Relative velocity of the skier relative to the chairlift = -50

Answer:

They are winds that blow in the opposite direction of a normal wind

Explanation:

Answer:

B.) They are winds that blow in the opposite direction of a normal wind.

Explanation:

it's correct trust

Answer:

The only liquid elements at standard temperature and pressure are bromine (Br) and mercury (Hg).

Answer:

C :)

Explanation:

Answer:

The greater the mass of a substance the more thermal energy. The thermal energy of a substance depends on the temperature and mass of that substance.

Explanation:

Answer:

Explanation:

If two objects have the same mass, the object with the higher temperature has greater thermal energy. Temperature affects thermal energy, but temperature isn't the same thing as thermal energy. That's because an object's mass also affects its thermal energy.

Answer:

B and C

Explanation:

The given symbol  [tex]_{-1}^{0}e[/tex] denotes an electron. An electrons has neglecting mass and has one unit of negative charge. Thus, option A is correct.

An electron is a subatomic particle. the other subatomic particles that constitutes an atom are neutrons and  protons. neutrons and protons are located inside the nucleus and electrons are revolving around the nucleus through circular paths of fixed energies.

Electrons are having negative charge and protons are positively charged particles. For an atom the number of protons and electrons are the same. Therefore, an element in its atomic state is neutral.

Neutrons are neutral. However both neutrons and protons are having significant mass compared to an electrons. Hence, the representation of electrons include zero mass and -1 charge. Hence, option A is correct.

To find more on electrons, refer here:

https://brainly.com/question/1255220

#SPJ5

Answer: Mechanical waves

Explanation:

Mechanical waves require a medium in order to transport their energy from one location to another. A sound wave is an example of a mechanical wave. Sound waves are incapable of traveling through a vacuum.

Answer:

Mechanical waves

Explanation:

edge 22'

Answer:

A. 400 J

Explanation:

Because the process is isochoric, no volume change, so no work, so none of the energy is lost or converted. In other words, the system will gain and hold onto all of the J of heat put into it, which was 400J

Answer:

d) refraction

Explanation:

in physics, refraction is the change of direction of a wave passing from one medium to another. refraction of light is the most commonly observed phenomenon but other waves such as sound waves and water waves also experience refraction

Answer:

B. Translocation

Explanation:

It means a change in location. It often refers to genetics, when part of a chromosome is transferred to another chromosome, you want a change in location because you are so thirsty in the desert and need water

Angle of incidence always equals angle of reflection. Think of a tennis ball being hit into a wall. The ball will bounce off at the same angle that it approached with. The angles mentioned are formed through the line called the "normal", which is the line perpendicular to the surface.

Answer:

-16°C

Explanation:

PV = nRT

V and n are constant.

P / T = P / T

(2 atm + 1 atm) / (266 K) = (1.9 atm + 1 atm) / T

T = 257.1 K

T = -16°C

Answer:

The ridge subducts and moves the rock

Explanation:

You got the right answer

Answer:

  q₁ = -6.54 10⁻⁵ C

Explanation:

Force is a vector quantity, but since all charges are on the x-axis, we can work in one dimension, let's apply Newton's second law

                F = F₁₂ + F₂₃

the electric force is given by Coulomb's law

                F = k q₁q₂ / r₁₂²

let's write the expression for each force

                F₂₃ = k q₂ q₃ / r₂₃²

                F₂₃ = 9 10⁹ 34.4 10⁻⁶ 72.8 10⁻⁶ / 0.1²

                F₂₃ = 2.25 10³ N

                F₁₂ = k q₁q₂ / r₁₂²

                F₁₂ = 9 10⁹ q₁ 34.4 10⁻⁶ / 0.1²

                F₁₂ = q₁   3,096 10⁷ N

we substitute in the first equation

                225 = q₁  3,096 10⁷ +2.25 10³

                q₁ = (225 - 2.25 10³) / 3,096 10⁷

                q₁ = -6.54 10⁻⁵ C

Answer:

Resistance can be defined as the potential difference between two points in a circuit, while voltage is the amount of electrons moving through a point in a circuit every second.

Explanation:

Answer:

4

Explanation:

The number 4 that is infront of the CHA(4CHA) means to say that there are 4C 4H and 4A

Tip:the number infront of a equation is call the coefficient