Answer:
You could conclude the 2nd fact
Explanation:
The conclusion will be that she died before 4-5 hours and she has been poisoned.
What will be the conclusion?It is found that the 19 years old female was found in the woods and she finds lying her face down and also the lividity is present on the backside of the woman.
First of all, we will understand what is lividity. Lividity is the process in which the color of the body changes and it starts after 1-4 hours of death.
lividity occurs when the blood does not pump the blood in the body and the blood is collected to the particular area where the gravity is acting.
If the body is found face down with signs of blanching on its back, it suggests to forensic scientists that the individual had likely died on their back and been moved.
If the body color changes to red cherry then it can be predicted that the individual died from carbon mono oxide poisoning
If the body color changes to pink it can be due to cyanide poisoning.
Thus the conclusion will be that she died before 4-5 hours and she has been poisoned.
To know more about lividity follow
https://brainly.com/question/18215801
A 10 kg sled is sitting on top of a 10 m hill what is the potential energy of the sled
Answer:
Explanation:
potential energy=mass*height*gravity
=10*10*9.8
=100*9.8
980 joule
Lack of portion control contributes to the obesity problem in the United States.
True
False
A person should believe all the advertisement her or she sees or hears when considering a weight loss program. true or false
Answer:
False. Its your body, you do what you want. Wanna lose weight? Then do some reasearch. Wanna keep how body how it is? Then keep it. Its your body
Explanation:
how long does it take a ball to fall 5 meters
yellow light minus magenta light equals
A person walking in high heals can damages the floor by making small dimples in the
floor since all their weight is concentrated on the tip of the high heal. It the person
weighs 81 kg and the high of the tip of the high heal is 3.5 cm2, what is the force over
the floor?
SHOW WORK IF POSSIBLE TANKS A LOT
Answer:
2 314.28571 kg / m
Explanation:
divide
and you see
Figure one, voltmeters
Answer:
(i) Half
(ii) 3 V
(iii) V₁
Explanation:
(i) The given parameters are;
The circuits have identical resistances
The number of resistors in circuit 1 = 1 resistor
The number of resistors in circuit 2 = 2 resistors
Let 'R' represent the value of each resistor, we have;
The total resistance of circuit 1 = R Ohm
The total resistance of circuit 3 = 2·R Ohm
∴ The total resistance of circuit 1 = (1/2) × The total resistance of circuit 3
∴ The resistance of circuit 1 is half the resistance of circuit 3
(ii) The potential difference of each cell, V = 1.5 volts
The number of cells in circuit 2 = 2 cells
The total potential difference of the cells of circuit 2 = 2 × 1.5 volts = 3 × volts = 3 V.
The voltmeter reading = The potential difference across the cell or cells it is applied
∴ The voltmeter reading on voltmeter, V₂, applied across the cells of circuit 2 = 3 V
(iii) The voltmeter reading V₁ = 1.5 V
The voltmeter reading V₂ = 3 V
The voltmeter reading V₃ = 4.5/(2·R) × R = 2.25 V
Therefore, the voltmeter reading with the smallest volt, is V₁ = 1.5 V
A state of being conscious, or aware, of something is called ________________.
Group of answer choices
A. activation
B. mindfulness
C. persistence
D. motivation
Answer:
B or D
Explanation:
What makes magnetic objects different from non- magnetic objects?
Why is the sum of forces/net force less than the applied force? Think about the direction of the forces in your answer
Answer:
he same direction the magnitude of the resultant is equal to the scalar sum of the magnitude of the forces, but if they are applied in different directions the magnitude must be found using the Pythagorean theorem
Explanation:
When there are several applied forces, if they are all in the same direction the magnitude of the resultant is equal to the scalar sum of the magnitude of the forces, but if they are applied in different directions the magnitude must be found using the Pythagorean theorem, so which the resulting dowry is less than the sum of the magnitudes.
Let's carry out an example with two forces, F1 and F2 of equal magnitudes
if they are in the same direction
F_total = F₁ + F₂ = 2 F
if they are at 90º
F_total = [tex]\sqrt{F_1^2 + F_2^2}= \sqrt{2} \ F[/tex]
if they are at 180º
F_total = F₁ -F₂ = 0
How many planets did earth send out expeditions to In interstellar
Answer:
just 1 mart
Explanation:
mart is the first planeta that a men stay
Answer:
TWELVE
Explanation:
There were twelve landing pods sent to twelve potentially habitable planets which could sustain human life. It is presumed that none of the astronauts that disembarked on the missions survived.
A bowling ball moving with a velocity of 5V to the right collides elastically with a beach ball moving at a velocity 2V to the left. The bowling ball barely slows down. What is the approximate velocity of the beach ball after the collision?
Answer:
[tex]v'_2=3V[/tex]
Explanation:
From the question we are told that:
Bowling ball Speed [tex]v_1=5 m/s[/tex]
Beach ball Speed [tex]v_2=2 m/s[/tex]
Let The Mass be equal i.e
[tex]M_1=M_2[/tex]
Therefore
Generally the equation for Velocity of beach ball after collision [tex]v'_2[/tex] is mathematically given by
Since Velocity is Vector Quantity
Therefore
[tex]v'_2=v_1-v_2[/tex]
[tex]v'_2=5-2[/tex]
[tex]v'_2=3V[/tex]
Two people are trying to push a large box across a floor. Person 1 pushes with a force of 15 N to the right, while person 2 pushed with a force of 20 N to the right. What is the net force acting on the box?
5 N to the left
5 N to the right
35 N to the left
35 N to the right
Answer:
35 N to the right
Explanation:
When calculating net force when both forces are on the same side you add them when they are going against each other you subtract them.
Which of the following has contributed to the obesity problem in the United States?
variation of serving sizes
distortion of serving sizes
packaging of serving sizes
labeling of serving sizes
Answer:
Variation of serving sizes
Explanation:
Explanation:
The two most commonly advanced reasons for the increase in the prevalence of obesity are certain food marketing practices and institutionally-driven reductions in physical activity, which we have taken to calling “the big two.” Elements of the big two include, but are not limited to, the “built environment”, increased ...
This is the question
please help asap
I am not sure of this, but it is either the third option or the last option.
list 10 qualities of an effective leader.
answer: vision
inspiration
stragic and critical thinking
interpersonal complication
autencity and self awareness
open mindness and creativity
flexibility
responsibility and dependability
Answer:
effective leader
1. must stand on his/her words
2. must trust in his/her capabilities
3. must learn from mistakes and never repeat them
4. should motivate others to go in a right path
5. should have an out of the box thinking ability
6. must be responsible towards his duty
7. never disrespect someone weaker than him
8. must trust his followers
9. must have faith in them
10. always be responsible for the things his/her followers do
Would you expect to weigh more on an ocean beach or on top of a mountain? Explain.
Answer:
An Ocean beach
Explanation:
a Ocean beach is far heavier than the top of a mountain, despite that a mountain is made with many heavy rocks a Ocean beach may have light sand but the layers of sand and the width would be way heavier then the top of a mountain.
What type of weather does Los Angeles, California have?
Answer:
Explanation:
Hot and breezy weathe
Answer:
The climate of Los Angeles is a year-round mild-to-hot and mostly dry climate for the LA metropolitan area in California. The climate is classified as a Mediterranean climate, which is a type of dry subtropical climate. It is characterized by seasonal changes in rainfall—with a dry summer and a winter rainy season
Explanation:
Un neumático sin cámara, soporta una presión de 1.5 atm cuando la temperatura ambiente es de 300°K. ¿Qué presión llegará a soportar dicho neumático si, en el transcurso de un viaje, las ruedas alcanzan una temperatura de 67ºC? Atm
Answer:
El neumático soportará una presión de 1.7 atm.
Explanation:
Podemos encontrar la presión final del neumático usando la ecuación del gas ideal:
[tex] PV = nRT [/tex]
En donde:
P: es la presión
V: es el volumen
n: es el número de moles del gas
R: es la constante de gases ideales
T: es la temperatura
Cuando el neumático soporta la presión inicial tenemos:
P₁ = 1.5 atm
T₁ = 300 K
[tex] V_{1} = \frac{nRT_{1}}{P_{1}} [/tex] (1)
La presión cuando T = 67 °C es:
[tex] P_{2} = \frac{nRT_{2}}{V_{2}} [/tex] (2)
Dado que V₁ = V₂ (el volumen del neumático no cambia), al introducir la ecuación (1) en la ecuación (2) podemos encontrar la presión final:
[tex] P_{2} = \frac{nRT_{2}}{V_{2}} = \frac{nRT_{2}}{\frac{nRT_{1}}{P_{1}}} = \frac{P_{1}T_{2}}{T_{1}} = \frac{1.5 atm*(67 + 273)K}{300 K} = 1.7 atm [/tex]
Por lo tanto, si en el transcurso de un viaje las ruedas alcanzan una temperatura de 67 ºC, el neumático soportará una presión de 1.7 atm.
Espero que te sea de utilidad!
Which of the following represents a joule?
Select one or more:
O a. kg/(m2/s2
O b. kg*(m2/s2)
O c. kg*(m/s2)
d. N*m
Answer:
d. N*m
Explanation:
Workdone which is measured in Joules is calculated using the formula;
Workdone = force * distance
Where;
Force is measured in Newton
Distance is measured in meters.
Therefore, workdone also has the measurement of Newton-meters.
What is globalization?
Answer:the process by which businesses or other organizations develop international influence or start operating on an international scale.
Explanation:
For the love of God please help me before my mom gets angry about my horrible grades
A 170.0 g sample of a substance is heated to 120.0 °C and then plunged into 200.0 mL of water at 10.0 °C. The resulting mixture has a temperature of 12.6 °C. What is the specific heat capacity of the substance?
I'LL GIVE BRAINLIEST!!!!
Answer:
Heat Lost = (120 - 12.6) deg * 170 g * S = `18260 gm-deg * S
Heat Gained = (12.6 - 10) deg * 200 gm* 1 cal/ gm-deg - 520 cal
S = 520 / 18260 cal / gm-deg = .0285 cal / gm-deg
Since Heat Lost = Heat Gained
I need to get into uni pls help
TRUE OR FALSE
an airplane is flying on a course directed 60 degrees East of South. If the plane continues, the plane will fly farther south than east
Answer:
True
Explanation:
This Question is a little tricky, so I am unsure if this s the most logical answer.
If you'd look at a compass, 60 degrees south is moreover south then east, and the two imaginary lines are unlikely to intercept.
A 55 kg box rests on a horizontal surface. The coefficient of kinetic friction between the box and the surface is 0.30. If the box is pulled at constant velocity over the horizontal surface with horizontal applied force, what is the magnitude of the force of friction and the force applied?
Answer: [tex]161.7\ N[/tex]
Explanation:
Given
Mass of the box is [tex]m=55\ kg[/tex]
Coefficient of kinetic friction [tex]\mu_k=0.3[/tex]
Kinetic friction comes into play when the body is moving
Here, kinetic friction opposes the applied force
kinetic friction is [tex]\mu_kmg[/tex]
thus, the applied force is
[tex]F=\mu_kmg\\F=0.3\times 55\times 9.8\\F=161.7\ N[/tex]
-
J SLC
2SCC
A football player throws a football with a force of 50 N. The ball travels 12 min 3 seconds and
hits a water bucket with a force of 25 N. This causes the bucket to moves a distance of 4
meters in just 2 seconds
Answer:
DO NOT DOWNLOAD THAT LINK, IT WILL SCAM YOU!
Explanation:
Explanation:
hola si me puede dar la respuesta
Which of the following mass-spring sys
Case A: A spring with a k=300 N/m and a mass of 200 g suspended from it.
Case B: A spring with a k=400 N/m and a mass of 200 g suspended from it.
Explain your answer
Savion listed the steps involved when nuclear power plants generate electricity.
Nuclear reaction occurs.
Nuclear energy is converted to radiant and thermal energy.
Heat is used to generate steam.
Light and heat are released.
Steam turns turbines.
Mechanical energy is converted to electrical energy.
Which best explains how to correct Savion’s error?
In step 2, change “radiant and thermal ” to “chemical and mechanical.”
Reorder the steps so that step 4 appears before step 3.
Reorder the steps so that step 6 appears before step 5.
In step 6, change “mechanical” to “thermal.”
Answer:
Reorder the steps so that step 4 appears before step 3
Explanation:
In a nuclear power plant, we have;
1) Nuclear reaction between the radio active species and the particles takes place to generate energy in the nucleus of atoms
2) The nuclear energy in the atom is converted into radiant energy, which is the energy found in light, and thermal (heat) energy
3) The produced radiant and thermal energy is released as heat and light
4) With the produced heat, steam is generated
5) The generated steam turns the steam turbines and produced mechanical energy
6) The produced mechanical energy is then converted into electrical energy in the electrical generator of the power plant
To correct Savion's error, Step 4) the light and heat should be released before step 3) the released heat can be used to generate steam, we therefore reorder the steps so that step 4 appears before step 3.
Answer:
The answer is B on Edge
Explanation:
If a ball is thrown straight up with an initial velocity of 20 m/s upward, what is the maximum height it will reach?
EASY BRAINLIEST PLEASE HELP!!
-if you answer correctly ill give you brainliest which will give you 100pts-
(if you put links or don't answer accordingly im reporting your account)
Answer:
A. 4.96 m
Explanation:
Using the formula for a wavelength:
Wavelength = velocity / frequaency
Using the provided information you have:
Wave length = 300,000,000 m/s / 60,500,000 HZ
Divide to get: 4.958 meters
Round to 4.96 meters
Si está probando u motor para un nuevo modelo de coche ; este es capaz de pasar de 0 a 100 km/h en 7,5 segundos . Si el coche tiene una masa de 550 kg cuál será la fuerza que realiza el motor ?
Answer:
La fuerza que realiza el motor es 2035 N.
Explanation:
Podemos encontrar la fuerza del motor usando la siguiente ecuación:
[tex] F = ma [/tex] (1)
En donde:
m: es la masa del coche = 550 kg
a: es la aceleración
Se puede calcular la aceleración mediante la siguiente ecuación cinemática:
[tex] v_{f} = v_{0} + at [/tex] (2)
En donde:
[tex] v_{f}[/tex]: es la velocidad final del coche = 100 km/h
[tex] v_{0} [/tex]: es la velocidad inicial del coche = 0
t: es el tiempo = 7,5 s
Resolviendo la ecuación (2) para "a" tenemos:
[tex] a = \frac{v_{f} - v_{0}}{t} = \frac{100\frac{km}{h}*\frac{1000 m}{1 km}*\frac{1 h}{3600 s} - 0}{7,5 s} = 3,70 m/s^{2} [/tex]
Entonces, la fuerza es:
[tex] F = ma = 550 kg*3,70 m/s^{2} = 2035 N [/tex]
Por lo tanto, la fuerza que realiza el motor es 2035 N.
Espero que te sea de utilidad!