The velocity of car B after the calculation can be obtained as 5.5 m/s.
What is a collision?We have to look at the principle of the conservation of the linear momentum and that is what we need so as to be able to deal with the problem that we have in this question as we have it here.
We know that the total momentum of the system would have to be constant and the implication of this is that the momentum before collision must be the same as the momentum after collision if we have been able to designate the system as a closed system.
Using the formula as we have shown it, we know that;
Momentum before Collison must be equal to momentum after collision
As such we have the following as shown below;
(281 * 2.82) + (209 * 1.72) = (281 * 0) + (209 * v)
792.42 + 359.48 = 209 v
v = 5.5 m/s
Learn more about momentum:https://brainly.com/question/24030570
#SPJ1
define motion also justify that rest and motion are related terms
Answer;
Motion: A body is said to be in motion if it changes its position with respect to its surroundings.
Explanation:
Rest and motion are the relative terms because they depend on the observer's frame of reference. So if two different observers are not at rest with respect to each other, then they too get different results when they observe the motion or rest of a body .
one example for each. Rest: If a body does not change its position with respect to its surroundings, the body is said to be at rest. ... Motion: A body is said to be in motion if it changes its position with respect to its surroundings.
PLEASEEE HELP, thank you :)
Answer:
The answer is B.
Explanation:
Given that the current (Ampere) in a series circuit is same so we can ignore it. We can assume that the total voltage is 60V and all the 3 resistance are different, 20Ω, 40Ω and 60Ω. So first, we have to find the total resistance by adding :
Total resistance = 20Ω + 40Ω + 60Ω
= 120Ω
Next, we have to find out that 1Ω is equal to how many voltage by dividing :
120Ω = 60V
1Ω = 60V ÷ 120
1Ω = 0.5V
Lastly, we have to calculate the voltage at R1 so we have to multiply by 20 (R1) :
1Ω = 0.5V
20Ω = 0.5V × 20
20Ω = 10V
Fill in the blanks in the following statements:
1. A parsec is defined as the distance from the Sun which would result in a parallax of_____ arcsecond as seen from Earth when observed 6 months apart.
2. One parsecs is about_____light years.
3. The more distant a star, the_____its parallax.
4. The statement "we can measure stellar parallax for most stars in our galaxy" is_____.
5. The closest stars have parallaxes smaller than______arcsecond.
6. The first successful measurements of stellar parallax were made by______in year______for the star named.
7. Star Fred has parallax four times greater than star Bob. Star Fred is______times______then star Bob.
Answer:
Explanation:
1. A parsec is defined as the distance from the Sun which would result in a parallax of_TWO____ arcsecond as seen from Earth when observed 6 months apart.
2. One parsecs is about_3.3____light years
3. The more distant a star, the_LESS ____its parallax.
4. The statement "we can measure stellar parallax for most stars in our galaxy" is__TRUE .___.
5. The closest stars have parallaxes smaller than_.002 _____arcsecond.
6. The first successful measurements of stellar parallax were made by_Friedrich Bessel_____in year_1838_____for the star named.
7. Star Fred has parallax four times greater than star Bob. Star Fred is__4____times_nearer_____than star Bob.
On a 100km track , a train travels the first 30km with a speed of 30km/h . How fast the train travel the next 70 km if the average speed for the entire journey is 40km/h?
Answer:
v = 46.67 km/h
Explanation:
We will use the following formula throughout this numerical:
s = vt
where,
s = distance covered
v = speed
t = time taken
FOR FIRST 30 km:
s = 30 km
v = 30 km/h
t = t₃₀ = ?
Therefore,
30 km = (30 km/h)(t₃₀)
t₃₀ = (30 km)/(30 km/h)
t₃₀ = 1 h
FOR TOTAL 100 km:
s = 100 km
v = 40 km/h (Average Speed)
t = total time = ?
Therefore,
100 km = (40 km/h)(t)
t = (100 km)/(40 km/h)
t = 2.5 h
FOR LAST 70 km:
s = 70 km
t₇₀ = t - t₃₀ = 2.5 h - 1 h = 1.5 h
v = v₇₀ = ?
Therefore,
70 km = v(1.5 h)
v = 70 km/1.5 h
v = 46.67 km/h
The following passage has not been edited. There is an error in each line. Write the
incorrect word and the correction in your answer sheet against the correct question
number. The first one has been done as an example. ( 1 x 4 = 4 )
Community service sensitize people to Error: sensitize ; Correction: sensitizes
other‟s needs and supports inclusive (a) Error: _______ ; Correction: ______
development to the underprivileged (b) Error: _______ ; Correction: ______
sections with society. Courses about social (c) Error: ______ ; Correction: _______
work prepares frontline workers to (d) Error: _______ ; Correction: ______
Answer:
(a) Error: Other's ; Correction: Others'
(b) Error: to ; Correction: for
(c) Error: with ; Correction: of
(d) Error: prepares ; Correction: prepare
Explanation:
a) The error is in the word "other's" as the position of apostrophe is wrong, so the correct word will be "others'", it shows plural nouns.
b) The error is in the word "to", so the correct word will be "for" as for is use to talk about a purpose.
c) The error is in the word "with" and the correct word will be "of" as of indicates relationships between other words including things that made of other things.
d) The error is in the word "preapres" and the correct word will be "prepare".
When we double the distance between a source of light and the
surface on which it falls, the amount of illumination on the surface
decreases to
(what fraction) of the
original illumination.
The amount of lighting on a surface drops to (1/4) of the initial illumination when the distance between a light source and the surface it falls on is doubled.
What is illumination?The amount of light or luminous flux that falls on a surface is known as illumination. It is expressed as lux or lumens per square meter.
The square of the distance has an inverse relationship with the light intensity;
[tex]\rm I = \frac{1}{r^2}[/tex]
Where,
I is the light intensity
r is the distance
Let r is the distance and I is the sound intensity for case 2;
r' = 2r
[tex]\rm I' = \frac{1}{(2r)^2} \\\\ I' = \frac{1}{4r^2} \\\\ I' = \frac{I}{4}[/tex]
When we double the distance between a source of light and the surface on which it falls, the amount of illumination on the surface decreases to(1/2) of the original illumination.
Hence the value of the fraction is 1/4.
To learn more about the illumination refer;
https://brainly.com/question/20160684
#SPJ2
A machine takes 0.5 seconds to move a brick 1 meter and put 100 Joules of energy into it. (hint: Power is the amount of energy transferred or converted per unit time. Or we say power is work done per unit time. LaTeX: P\:=\:\frac{W}{t}P = W t) This machine would expend more power in this action if it:
Answer:
200 Watts.
Explanation:
Power is defines as the amount of work expended per unit time. Mathematically, it is expressed as Power = Workdone/Time
Given parameters
Energy used up 100Joules
Distance moved by brick = 1 meters
Time taken by the machine = 0.5 secs
Power can also be written as Energy/Time
Required
We need to calculate the amount of power used up.
Power = 100J/0.5s
Power = 100/(1/2)
Power = 100 * 2/1
Power = 200Watts.
This shows that the machine would expend 200Watts of power
If the absolute pressure inside the bottom of a container open to the atmosphere and filled with an unknown substance is 300 Pa. And the height of the container is 800.0 cm. What is the density of the substance?
Answer:
2.5 kg/m³
Explanation:
Absolute pressure = gauge pressure + atmospheric pressure
P = Pg + Pa
The gauge pressure caused by the weight of a fluid is called the static pressure. It is equal to the density of the fluid × acceleration due to gravity × depth of the fluid,
Pg = ρgh
Therefore:
P = ρgh + Pa
300 Pa = ρ (10 m/s²) (8.00 m) + 100 Pa
ρ = 2.5 kg/m³
Please answer this question
Explanation:
m = kg. v=m/s. g=m/s^2. h= m
>>1/2mv^2=mgh
>>1/2mv^2=mgh>> kg*(m/s)^2= kg*m/s^2*m
>>1/2mv^2=mgh>> kg*(m/s)^2= kg*m/s^2*m>>kg m^2/s^2=kg m^2/s^2 the fraction 1/2 won't be able to make any changes to to the dimensional expression of energy i.e half of energy is still energy therefore you can neglect the number .
>>kg m^2/s^2=kg m^2/s^2
>>J= J
Increase in Space Suit Pressure 0.0/3.0 points (graded) If the pressure in a space suit increases, how will each of the following be affected? Flexilibity will: Increase Decrease Stay the same unanswered The required pre-breathe time will: Increase Decrease Stay the same unanswered The mass of the suit will: Increase Decrease Stay the same
Answer:
Flexibility Increases
Pre-breathe time decreases
Mass of suit decreases.
Explanation:
Spacesuits are designed for space shuttles when a person goes to explore the galaxy. The spacesuits shuttle era are pressurized at 4.3 pounds per inch. The gas in the suit is 100% of oxygen and there is more oxygen to breathe when the altitude of 10,000 is reached. This will decrease the breathing time and mass of suit.
a) A conductor carrying a current I = 12.5 A is directed along the positive x axis and perpendicular to a uniform magnetic field. A magnetic force per unit length of 0.110 N/m acts on the conductor in the negative y direction. Determine the magnitude of the magnetic field in the region through which the current passes.
Answer:
8.8 mT
Explanation:
Current through the conductor = 12.5 A
Magnetic force per unit length on the wire = 0.110 N/m
Recall that the magnetic force per unit length on a current carrying conductor is in a uniform magnetic field is
[tex]\frac{F}{l}= IBsin\alpha[/tex]
where B is the magnetic field magnitude
[tex]I[/tex] is the current in the conductor
α is the angle the conductor makes with the magnetic field ( since it is perpendicular in this case, α is 90°)
imputing values into the equation, we'll have
0.11 = 12.5 x B x sin 90°
but sin 90° = 1, therefore, we have
0.11 = 12.5B
B = 0.11/12 = 8.8 x 10^-3 T
or rather = 8.8 mT
A square loop 24.0 cm on a side has a resistance of 6.10Ω. It is initially in a 0.665-T magnetic field, with its plane perpendicular to magnetic field B but is removed from the field in 40.0ms. Calculate the electric energy dissipated in this process.
Answer:
[tex]E=6.01\times 10^{-3}\ J[/tex]
Explanation:
It is given that,
Side of a square loop, l = 24 cm = 0.24 m
Resistance of loop, R = 6.1 ohms
Initial magnetic field is 0.665 T and final magnetic field is 0 as the field is removed in 40 ms
We need to find the electrical energy dissipated in this process.
Due to change in magnetic field, the loop will induce a voltage. The induced voltage is given by :
[tex]V=-\dfrac{dB}{dt}\\\\V=\dfrac{BA}{t}[/tex]
If I is induced current then,
[tex]V=IR[/tex]
[tex]I=\dfrac{V}{R}\\\\I=\dfrac{BA}{tR}[/tex]
Power is given by voltage times current. So,
[tex]P=\dfrac{(BA)^2}{(t^2R)}[/tex]
Now, energy is given by the product of power and time. So,
[tex]E=\dfrac{(BA)^2}{(t^2R)}\times t\\\\E=\dfrac{(BA)^2}{(tR)}[/tex]
Now putting all the values in above formula. So,
[tex]E=\dfrac{(0.665\times (0.24)^2)^2}{(40\times 10^{-3}\times 6.1)}\\\\E=6.01\times 10^{-3}\ J[/tex]
So, the electrical energy of [tex]6.01\times 10^{-3}\ J[/tex] is dissipated in this process.
The electrical energy dissipated throughout this process will be "6.01 × 10⁻³ J".
Magnetic fieldAccording to the question,
Square loop's side, l = 24 cm or,
= 0.24 m
Loop's resistance, R = 6.1 ohms
Initial magnetic field = 0.665 T
Final magnetic field = 0
We know the relation,
→ V = - [tex]\frac{dB}{dt}[/tex]
= [tex]\frac{BA}{t}[/tex]
Also we know,
Current, V = IR
I = [tex]\frac{V}{R}[/tex]
= [tex]\frac{BA}{tR}[/tex]
Now, Energy, E = [tex]\frac{(BA)^2}{t^2R}[/tex] × t or,
= [tex]\frac{(BA)^2}{tR}[/tex]
By substituting the values,
= [tex]\frac{(0.665\times (0.24)^2)^2}{40\times 10^{-3}\times 6.1}[/tex]
= 6.01 × 10⁻³ J
Thus the response above is correct.
Find out more information about magnetic field here:
https://brainly.com/question/26257705
A ray of light is projected into a glass tube that is surrounded by air. The glass has an index of refraction of 1.50 and air has an index of refraction of 1.00. At what minimum angle will light in the glass tube be totally reflected at the glass/air interface?
Answer:
θ = 41.8º
Explanation:
This is an internal total reflection exercise, the equation that describes this process is
sin θ = n₂ / n₁
where n₂ is the index of the incident medium and n₁ the other medium must be met n₁> n₂
θ = sin⁻¹ n₂ / n₁
let's calculate
θ = sin⁻¹ (1.00 / 1.50)
θ = 41.8º
Two long, straight wires are parallel and 10 cm apart. One carries a current of 2.0 A, the other a current of 5.0 A. If the two currents flow in opposite directions, what is the magnitude and direction of the force per unit length of one wire on the other
Answer:
The magnitude and direction of the force per unit length of one wire on the other is 2 x 10⁻⁵ N/m, attractive force.
Explanation:
Given;
distance between the two parallel wires, r = 10 cm = 0.1 m
current in the first wire, I₁ = 2A
current in the second wire, I₂ = 5 A
The force per unit length on each wire can be calculated as;
[tex]\frac{F}{L} = \frac{\mu_oI_1I_2}{2\pi r}[/tex]
where;
μ₀ is permeability of free space = 4π x 10⁻⁷ m/A
[tex]\frac{F}{L} = \frac{\mu_oI_1I_2}{2\pi r} \\\\\frac{F}{L} = \frac{4\pi*10^{-7}*2*5}{2\pi *0.1} \\\\\frac{F}{L} = 2 *10^{-5} \ N[/tex]/ m
The direction of the force between the two wires is attractive since the current in the two wires are in opposite direction.
Therefore, the magnitude and direction of the force per unit length of one wire on the other is 2 x 10⁻⁵ N/m, attractive force.
The graph shows a wave that oscillates with a frequency of 60 Hz. Based on the information given in the diagram, what is the speed of the wave?
Answer:
900 cm/s or 9 m/s.
Explanation:
Data obtained from the question include the following:
Length (L) = 30 cm
frequency (f) = 60 Hz
Velocity (v) =.?
Next, we shall determine the wavelength (λ).
This is illustrated below:
Since the wave have 4 node, the wavelength of the wave will be:
λ = 2L/4
Length (L) = 30 cm
wavelength (λ) =.?
λ = 2L/4
λ = 2×30/4
λ = 60/4
λ = 15 cm
Therefore, the wavelength (λ) is 15 cm
Now, we can obtain the speed of the wave as follow:
wavelength (λ) = 15 cm
frequency (f) = 60 Hz
Velocity (v) =.?
v = λf
v = 15 × 60
v = 900 cm/s
Thus, converting 900 cm/s to m/s
We have:
100 cm/s = 1 m/s
900 cm/s = 900/100 = 9 m/s
Therefore, the speed of the wave is 900 cm/s or 9 m/s.
The angle of incidence of a ray of light striking an equilateral triangular prisms ABC of refracting angle 60o is 40o. Calculate:
(i)the angle of refraction at the first face
(ii)the angle of emergence
Answer:
1: the refracted angle in the first face is equal to the incident angle that is 60degrees
2. Emergence Angle is 42degrees
Explanation:
Pls see attached file
Iron man wears an awesome ironsuit.He is flying over high current carrying wire. Will he be affected?
Answer:
According to super hero logic , nothing will happen to him.
But according to science , yes he will get current shock but good news is that he wouldn't get elected until he is in contact with the wires.
He may / may not be affected but his suit will be damaged for sure as it is made of metal.
HOPE THIS HLEP AND PLSSSSS MARK AS BRAINLIEST AND THNXX :)
Let us treat a helicopter rotor blade as a long thin
rod, as shown in Fig. 8–49. (a) If each of the three rotor
helicopter blades is 3.75 m long and has a mass of 135 kg,
calculate the moment of inertia of the three rotor blades
about the axis of rotation. (b) How much torque must the
motor apply to bring the blades from rest up to a speed
of 6.0 rev/s in 8.0 s?
Rotor
Answer:
(a) 1900 kg m²
(b) 8950 Nm
Explanation:
(a) The moment of inertia of a rod about its end is I = ⅓mL².
For 3 rods of mass m = 135 kg and length L = 3.75 m, the total moment of inertia is:
I = 3 (⅓ (135 kg) (3.75 m)²)
I = 1900 kg m²
(b) Net torque = moment of inertia × angular acceleration
∑τ = Iα
First, find the angular acceleration.
ω₀ = 0 rad/s
ω = 6.0 rev/s (2π rad/rev) = 37.7 rad/s
t = 8.0 s
α = (37.7 rad/s − 0 rad/s) / 8.0 rad/s = 4.71 rad/s²
∑τ = Iα
∑τ = (1900 kg m²) (4.71 rad/s²)
∑τ = 8950 kg m² / s²
∑τ = 8950 Nm
A diver releases an air bubble of volume 3.0 cm3 from a depth of 18 m below the surface of a lake, where the temperature is 9.0 ∘C. Part A What is the volume of the bubble when it reaches just below the surface of the lake, where the temperature is 22 ∘C?
Answer:
Explanation:
We shall apply gas law formula to get the solution .
P₁ V₁ / T₁ = P₂ V₂ / T₂
P₁ = 10⁵ + 18 x 10³ x 9.8 where 10⁵ Pa is atmospheric pressure at surface
= 1.764 x 10⁵ + 10⁵
= 2.764 x 10⁵
2.764 x 10⁵ x 3 / ( 273 + 9 ) = 10⁵ x V₂ / ( 273 + 22 )
V₂ = 8.67 cm³
A spherical mirror gives an image magnified 5 times at a distance 5 m. determine whether the mirror is convex or concave? How much will be the focal length of the mirror?
Answer:
1. Concave mirror.
2. 4.17 m or 417 cm.
Explanation:
The following data were obtained from the question:
Object distance (u) = 5 m
Magnification (M) = 5
Focal length (f) =..?
1. Identification of the mirror.
To determine whether or not the mirror is concave or convex, we must first of all calculate the image distance.
This can be obtained as follow:
Object distance (u) = 5 m
Magnification (M) = 5
Image distance (v) =.?
Magnification (M) = image distance (v) /object distance (u).
M = v/u
5 = v/5
Cross multiply
v = 5 x 5
v = 25 m
Since the image distance obtained is positive, the mirror is said to be a concave mirror.
2. Determination of the focal length of the mirro.
This can be obtained as follow:
Object distance (u) = 5 m
Image distance (v) = 25 m
Focal length (f) =...?
1/f = 1/v + 1/u
1/f = 1/25 + 1/5
1/f = 0.04 + 0.2
1/f = 0.24
Cross multiply
f x 0.24 = 1
Divide both side by 0.24
f = 1/0.24
f = 4.17 m
Converting the focal length of cm, we have:
1 m = 100 cm
Therefore, 4.17 m = 4.17 x 100 = 417 cm
Therefore, the focal length of the mirror is 4.17 or 417 cm.
Why does time seem to flow only in one direction?
Answer:
Time seem to flow only in one direction because if it started to go in backward direction that would break the second law of thermodynamics. We do not find time to be moving in any direction because time is not an object that can move nor is it a force that can move any object.
you (60 kg) are standing in a (500 kg) elevator that is moving upwards from a ground floor on a building what is the power rating of the motor that can lift this elevator if the elevator travels a distance of 20m upwards in 15 s
Explanation:
Power = work / time
Power = force × distance / time
P = (650 kg) (10 m/s²) (20 m) / (15 s)
P = 8667 W
Your car's 32.5 W headlight and 2.00 kW starter are ordinarily connected in parallel in a 12.0 V system. What power (in W) would one headlight and the starter consume if connected in series to a 12.0 V battery
Answer:
Explanation:
the resistance of a electrical device
R = V² / P where V is volt and P is power .
The devices are in parallel so same volt will apply on them
So R₁ = 12² / 32.5 = 4.431 ohm
R₂ = 12² / 2 x 10³ = .072 ohm
when they are in series
Common Current in them = 12 / 4.431 + .072
= 2.6649 A
power consumed by first device when they are in series
= current² x resistance
= 2.6649² x 4.431 = 31.46 W
power consumed by other
= 2.6649² x .072 = .511 W
A nonrenewable resource
Answer:
It is a finite resource.
Explanation:
A nonrenewable resource is a natural substance that is not replenished with the speed at which it is consumed. Fossil fuels such as oil, natural gas, and coal are examples of nonrenewable resources.
Answer:
Coal, oil, natural gas.
Explanation:
Non renewable resource -A non-renewable resource (also called a finite resource) is a natural resource that cannot be readily replaced by natural means at a quick enough pace to keep up with consumption.
Coal, oil, and natural gas are all examples of non-renewable resources and cannot be readily replaced to keep up with consumption.
Complete all four parts. 15 points. Will give brainliest! Show work!
Answer:
A. 5.08 secs.
B. 10.16 secs.
C. 126.50 m.
D. 373.36 m
Explanation:
Data obtained from the question include the following:
Initial velocity (u) = 65 m/s
Angle of projection θ = 50°
A. Determination of the time taken to reach the peak.
Initial velocity (u) = 65 m/s
Angle of projection θ = 50°
Acceleration due to gravity (g) = 9.8 m/s²
Time (t) =.?
t = u•Sine θ/g
t = (65 × Sine 50) /9.8
t = 5.08 secs.
B. Determination of the total time spent by the ball in air.
Time (t) taken to reach the peak = 5.08 secs.
Total time (T) spent by the ball in air =?
T = 2t
T = 2 × 5.08
T = 10.16 secs
Therefore, the total time spent by the ball in air is 10.16 secs.
C. Determination of the maximum height.
Initial velocity (u) = 65 m/s
Angle of projection θ = 50°
Acceleration due to gravity (g) = 9.8 m/s²
Maximum height (H) =..?
H = u²•Sine² θ / 2g
H = 65² × (Sine 50)² / 2 × 9.8
H = 4225 × (Sine 50)² /19.6
H = 126.50 m
Therefore, the maximum height reached by the ball is 126.50 m.
D. Determination of the horizontal distance travelled by the ball.
Initial velocity (u) = 65 m/s
Angle of projection θ = 50°
Acceleration due to gravity (g) = 9.8 m/s²
Horizontal distance (R) =..?
R = u²•Sine 2θ / g
R = 65² × Sine (2×30) / 9.8
R = (4225 × Sine 60) / 9.8
R = 373.36 m
Therefore, the horizontal distance travelled by the ball is 373.36 m
1. A note has a wavelength of 0.77955 m. If the speed of sound is 343.00 m/s, what pitch is this note? 2. A note has a wavelength of 0.52028 m. If the speed of sound is 343.00 m/s, what pitch is this note? please no funny answers
Answer:
1.) 440 Hz
2.) 659.3 Hz
Explanation:
1.) Given parameters are:
wavelength = 0.77955 m.
speed of sound = 343.00 m/s
Frequency = speed/ wavelength
Substitute speed and wavelength into the formula
Frequency = 343/ 0.77955
Frequency = 439.99
Frequency = 440 Hz approximately
2.) The parameters given are:
wavelength = 0.52028 m.
speed of sound = 343.00 m/s
Using the same formula
Frequency = speed/wavelength
Substitute all the parameters into the formula
Frequency = 343 / 0.52028
Frequency = 659.3 Hz approximately
The pitch of a note depends on the frequency of the sound waves.
The pitch of a sound increases as the frequency of the sound waves increases.
Answer:
1.) 440 Hz
2.) 659.3 Hz
Explanation:
1.) Given parameters are:
wavelength = 0.77955 m.
speed of sound = 343.00 m/s
Frequency = speed/ wavelength
Substitute speed and wavelength into the formula
Frequency = 343/ 0.77955
Frequency = 439.99
Frequency = 440 Hz approximately
2.) The parameters given are:
wavelength = 0.52028 m.
speed of sound = 343.00 m/s
Using the same formula
Frequency = speed/wavelength
Substitute all the parameters into the formula
Frequency = 343 / 0.52028
Frequency = 659.3 Hz approximately
The pitch of a note depends on the frequency of the sound waves.
The pitch of a sound increases as the frequency of the sound waves increases.
what nuclear fission and nuclear fusion have in common? A. They’re both used in power plants B. they have less mass than their reactants C. they start with the same reactants D. their products have more mass than their reactants
Answer:
B. they have less mass than their reactants
Explanation:
In both nuclear fission and nuclear fusion, the products have less mass than their reactants. So, option B is correct.
What is meant by nuclear reaction ?Nuclear reaction is defined as the reaction that involves the collision between one or more atomic nuclei and a highly energetic subatomic particle to produce one or more nuclei along with the emission of a large amount of energy.
Here,
Nuclear fission and fusion are two types of nuclear reactions that involves the production of large amount of energy from atomic nuclei.
Nuclear fission is the nuclear reaction in which a heavier nucleus is split into two or more lighter nuclei, under radioactive condition, with the release of a massive amount of energy.
Nuclear fusion is the nuclear reaction in which two or more lighter nuclei nuclei fuse together under radioactive condition and forms a heavier nuclei and by releasing a large amount of energy.
In both nuclear fission and nuclear fusion, there occurs a release of large amount of energy. This is because most of the mass of the reactants is converted into energy which is known as the mass-energy. So the products of these nuclear reactions will have lesser mass than their reactants.
Hence,
In both nuclear fission and nuclear fusion, the products have less mass than their reactants.
To learn more about nuclear reactions, click:
https://brainly.com/question/12786977
#SPJ3
calculate the energy dissipated by an electric iron which draws a current of 5A from a240v power supply for 25minutes
Explanation:
Given,
I = 5 A
V = 240 V
T = 25 mins = 1500 sec
Now,
Energy dissipated = IVT= 5×240×1500 = 1800000 J
Given a volume of 1000. сm of an ideal gas at 300. K, what volume would it occupy at a temperature of 600. K?
Answer:
2000 cm³
Explanation:
Assuming the pressure is constant:
V / T = V / T
1000 cm³ / 300 K = V / 600 K
V = 2000 cm³
b. i. In a hydraulic press, a force of 200N is applied to master piston of area 25cm. If
the press is designed to produce a force of 5000N, determine the area of the slave
piston.
(4marks)
Answer:
625 cm²
Explanation:
The pressure is the same on both pistons.
F/A = F/A
200 N / 25 cm² = 5000 N / A
A = 625 cm²