Calculate the pH of a solution with [H+] = 1.8 x 10^-5 M

Answer:

https://sensorex.com/ph-calculator/

Explanation:

go to this link and then scroll down a little bit and then you'll find the answer

Answer:

1. Distance  = 5 cm

Displacement = 1 cm

2. Distance = 7 cm

Displacement = 1 cm

3. Distance = 5 cm

Displacement = -1 cm

4. Distance  = 6 cm

Displacement = -2 cm

5. Distance  = 4 cm

Displacement = 0 cm

Explanation:

The distance an object travels is a measure of the total ground cobpvered bybthe object without regard to the direction of motion. It is a scalar quantity as it only takes into account magnitude but not the direction of a quantity.

Displacement however, is a measure of how far away or apart an object is from its starting position.  It a vector quantity as it takes into account both the magnitude and direction in its measurement.

From the attachment provided, considering forward direction as positive and reverse as negative :

1. When a object moves from point 1 to point 4 and reverses to point 2.:

Distance  = from 1 to 4 = 3 cm; from 4 back to 2 = 2 cm;  3 + 2 = 5 cm

Displacement = from 1 to 4 = +3 cm; from 4 back to 2 = -2 cm;  3 - 2 = 1 cm

2. When an object moves from point 1 to 5 and reverses to 2:

Distance = from 1 to 5 = 4cm; from 5 back to 2 = 3 cm; 4 + 3 = 7 cm

Displacement = from 1 to 5 = +4 cm; from 5 back to 2 = -4 cm;  4 - 3 = 1 cm

3. When an object moves from point 1 to 3 and then reverses to 0.

Distance  = from 1 to 3 = 2 cm; from 3 back to 0 = 3 cm;  2 + 3 = 5 cm

Displacement = from 1 to 3 = +2 cm; from 3 back to 0 = -3 cm;  2 - 3 = -1 cm

4. When an object moves from point 3 to 5 and then reverses to 1:

Distance  = from 3 to 5 = 2 cm; from 5 back to 1 = 4 cm;  2 + 4 = 6 cm

Displacement = from 3 to 5 = +2 cm; from 5 back to 1 = -4 cm;  2 - 4 = -2 cm

5. When an object moves from point 2 to 4 and then reverses to 3.

Distance  = from 2 to 4 = 2 cm; from 4 back to 2 = 2 cm;  2 + 2 = 4 cm

Displacement = from 2 to 4 = +2 cm; from 4 back to 2 = -2 cm;  2 - 2 = 0 cm

Answer:

B

Explanation:The poisonous substances, present in the environment can easily get into the trophic level as living organism depends on each other and environment for food and nutrition. These poisonous substances may not be broken down in the body or excreted easily, efficiently and quickly. Instead, they accumulate in the tissues, and as the living organism eats more, the concentration of these substances increases and they pass from one trophic level to the next. The tertiary consumer being at the top of trophic levels receives the maximum pollutant. This phenomenon is known as biological magnification.

So, the correct answer is option B.

Answer:

A. Autotrophs

Explanation:

an autotroph, def an organism that is able to form nutritional organic substances from simple inorganic substances such as carbon dioxide.

humans and other mammals, plants, and a select few other things

Answer:

B. aq if the reaction is inorganic (double or single displacement), neutralization, etc.

Explanation:

Hello there!

In this case, unfortunately we are not given the undergoing chemical reaction; however, in the most of the double displacement, neutralization, precipitation and in general, inorganic reactions, the hydrochloric acid must be B. aq as it must be dissolved in water as the reaction media. On the other hand, in some organic reactions, it can be either aqueous or gaseous, the latter, specially as a product. For that reason, you will need to make sure whether your reaction is organic or inorganic to correctly figure out the phase label.

Best regards!

Answer:

B. Particles of matter have spaces between them.

Explanation:

The particle nature model of matter is an model used to explain the properties and nature of matter. The statements of the particle nature model of matter are as follows :

1. Matter is made of small particles of atoms or molecules.

2. The particles of matter have space between them. The spaces between the particles are least in solids as they are closely packed together but are greatest in gases whose particles are far apart from each other.

3. The particles of matter are in constant motion at all times. Solids particles are not free to move due to strong molecular forces between the particles, but are constantly vibrating in their mean positions. Liquid particles free to move due to lesser molecular forces while gas molecules which have negligible intermolecular forces have the greatest ability to move.

4. The particles of matter are attracted to each other by intermolecular forces. These forces are greatest in solids and least in gases.

The correct option is B.

Answer:

Explanation:

Heat is a reactant.

If the equation requires heat to occur, the reaction is endothermic

The equation would have this model

A + B + heat =====> C + D

If the equation gives away heat, then it is exothermic

The equation would look like this. (I'll use a common reaction)

CH4 + 2O2 - heat ===> CO2 + 2H2O

The heat is minus when it has to be given away.

Answer: Primary consumers make up the second trophic level. They are also called herbivores. They eat primary producers—plants or algae—and nothing else. For example, a grasshopper living in the Everglades is a primary consumer

Answer:

primary consumer make up the second trophic level .they are also herbivores they eat primary consumer plants or alger and nothing else .for example a grasshopper living in the everglades is a primary consumer

Answer:

mi = 31.28 g

Explanation:

According to the law of conservation of energy:

[tex]Heat\ Gain\ by\ Ice = Heat\ Lost\ by\ Water\\m_iL = m_wC\Delta T\\[/tex]

where,

mi = mass of ice = ?

L = Latent heat of fusion of ice = 334 J/g

mw =  mass of water = 50 g

C = specific heat of water = 4.18 J/g.°C

ΔT = change in temperature of water = 75°C - 25°C = 50°C

Therefore,

[tex]m_i(334\J/g) = (50\ g)(4.18\ J/g.^oC)(50^oC)[/tex]

mi = 31.28 g

Answer:

1)2Na + Cl2 ----> 2NaCl

2)Ca + Br2 ---->CaBr2

3)K + H2O -----> KOH + H2

Answer: a. Cathode

b. Galvanic cell

c. Anode

d. Electrolytic cell

e. half reaction

Explanation:

Galvanic cell or Electrochemical cell is defined as a device which is used for the conversion of the chemical energy produced in a spontaneous redox reaction into the electrical energy.

Electrolytic cell is a device where electrical energy is used to drive a non spontaneous chemical reaction.

In the electrochemical cell, the oxidation occurs at an anode which is a negative electrode and the reduction occurs at the cathode which is a positive electrode.  Thus the electrons are produced at anode and travel towards cathode.

The balanced two-half reactions will be:

Oxidation half reaction : [tex]M\rightarrow M^{n+}+ne^-[/tex]

Reduction half reaction : [tex]N^{n+}+ne^-\rightarrow N[/tex]

Thus the overall reaction will be: [tex]M+N^{n+}\rghtarrow M^{n+}+N[/tex]

Answer:

answer po Yan hope it help

Answer:

Go to the pool , Bake, sleep, Watch ,Movies, go out with my freinds<3

Explanation:

Answer:

0. 070g

Mass of 1 Si atom =28.08/6.022*1023

So mass 1.5 *1021*4.6629*10-23

Answer:

[tex]\boxed {\boxed {\sf 0.070 \ g \ Si}}[/tex]

Explanation:

We are given a value of atoms and asked to find the mass. We can complete this in 2 steps.

1. Convert Atoms to Moles

First, we have to convert atoms to moles. We use Avogadro's Number or 6.022 × 10²³. This is the number of particles (atoms, molecules, formula units, etc.) in 1 mole of a substance.

In this case, the particles are silicon atoms. We can set up a proportion.

[tex]\frac { 6.022 \times 10^{23} \ atom \ Si }{1 \ mol \ Si}[/tex]

Multiply by the value of atoms given.

[tex]1.5 \times 10^{21} \ atom \ Si *\frac { 6.022 \times 10^{23} \ atom \ Si }{1 \ mol \ Si}[/tex]

Flip the ratio. This allows the atoms of silicon units to cancel and leave the moles of silicon.

[tex]1.5 \times 10^{21} \ atom \ Si *\frac {1 \ mol \ Si } {6.022 \times 10^{23} \ atom \ Si}[/tex]

[tex]1.5 \times 10^{21}*\frac {1 \ mol \ Si } {6.022 \times 10^{23} }[/tex]

[tex]\frac {1.5 \times 10^{21} \ mol \ Si } {6.022 \times 10^{23} }[/tex]

[tex]0.002490866822 \ mol \ Si[/tex]

2. Convert Moles to Grams

Next, we convert the moles to grams. We use the molar mass, which is found on the Periodic Table. This value is the number of grams in 1 mole of a substance. Look for silicon (Si).

Use this value as a ratio.

[tex]\frac {28.085 \ g \ Si}{1 \ mol \ Si}[/tex]

Multiply by the number of moles we calculated.

[tex]0.002490866822 \ mol \ Si *\frac {28.085 \ g \ Si}{1 \ mol \ Si}[/tex]

The moles of silicon units cancel, so we are left with grams.

[tex]0.002490866822 *\frac {28.085 \ g \ Si}{1}[/tex]

[tex]0.002490866822 *{28.085 \ g \ Si}[/tex]

[tex]0.06995599469 \ g \ Si[/tex]

3. Round

Finally we must round our answer. The original value has 2 significant figures, so our answer must have the same. For the number we calculated, that is the thousandth place.

[tex]0.069\underline95599469 \ g Si[/tex]

The 9 tells us to round the other 9 to a 0, then the 6 to a 7.

[tex]0.070 \ g \ Si[/tex]

The mass of 1.5 × 10²¹ silicon atoms is 0.070 grams of silicon.

Answer:

The frequency is 1000 cycles/s

Explanation:

An alternating current is an electrical current in which the current changes its magnitude and the sense cyclically. The frequency of this current is defined as the cycles that the current completes in one second.

As the current completes 100 cycles in 0.1 seconds, the frequency is:

100 cycles / 0.1s = 1000 cycles /s

Answer:

Baking a cake

Explanation:

Ape-x aprroved

Answer:

[tex]n_{Cl_2}=0.3molCl_2[/tex]

Explanation:

Hello there!

In this case, according to the given chemical reaction whereas the sodium chloride is in a 2:1 mole ratio with chlorine, the required moles of the later are computed as shown below:

[tex]n_{Cl_2}=0.6molNaCl*\frac{1molCl_2}{2molNaCl}[/tex]

So we cancel out the moles of NaCl to obtain:

[tex]n_{Cl_2}=0.3molCl_2[/tex]

Best regards!

Answer:

A) w/w % of Fe - 2.44%

B) w/w % of Mg - 4.590%

C) w/w % of Ca - 96%

Explanation:

A) w/w % of Fe in limestone as Fe2O3 = (Mass of Fe2O3 /Mass of limestone) x 100

 0.0357/1.4639 X 100

= 2.438 =2.44

B) w/w % of Mg in limestone as Mg2P2O7 = (Mass of Mg2P2O7 /Mass of limestone) x 100

= 0.0672/1.4639 X 100

= 4.590

C) w/w % of Ca in limestone as CaSO4 = (Mass of CaSO4/Mass of limestone) x 100

= 1.4058/1.4639 X 100

= 96

Answer:Fe =1.71%    Ma=0.99%    Ca=28.24%

Explanation:

The Lewis base that we can see in the equation is [tex]H_{2} O[/tex]

We have to bear in mind that the Lewis base is the substance that is able to donate a pair of electrons. The substances that is able to accept the pair of electrons is what we call the Lewis acid.

The Lewis acid must possess a space for the addition of an electron pair while the Lewis base would have to be a specie that has a lone pair of electrons or has a negative charge. Thus the water molecule would serve as a Lewis base in this regard.

Learn more about Lewis base;https://brainly.com/question/15570523

#SPJ1

Answer:

6 upper H subscript 2 upper O plus UPper C r (upper H subscript 2 upper O) subscript 6 superscript 3 plus.

✔ H2O or A.)

Cr3+

Cr(H2O)63+

Answer:yes coefficient u mean??

Explanation:

Answer:

Nuclear reactions involve a change in an atom's nucleus, usually producing a different element. Chemical reactions, on the other hand, involve only a rearrangement of electrons and do not involve changes in the nuclear.

Answer:

1 mole of KClO_3 contains 3 moles of O.

10 moles of O_2 contains 20 moles of O.

You need 20/3 moles of KClO_3 to produce 10 moles of O_2

Explanation:

sana makatulong

Answer:

coal, cotton, chinese tradictional medicine

Answer:

D and E

Explanation:

The other answers don't support steel, they support iron or are supporting both, and the question is why steel alloys are more often used

C supports both

B supports how iron's strength

A supports iron being easily shaped and bent

hope this helps

Answer:

[tex]n_{NH_3}^{produced}=6.3molNH_3[/tex]

Explanation:

Hello there!

In this case, according to the given chemical reaction, it is possible for us to use the 1:2 mole ratio of nitrogen to ammonia to calculate the moles of the latter that are produced when reacting 3.15 moles of the former with hydrogen as shown below:

[tex]n_{NH_3}^{produced}=3.15molN_2*\frac{2molNH_3}{1molN_2}[/tex]

Thus, by solving the equation we obtain:

[tex]n_{NH_3}^{produced}=6.3molNH_3[/tex]

Best regards!

Answer:

true

Explanation:

np have a good day brainliest?

Answer:

the answer is ion..

hope it helps..

Answer:

= -4a+22b

Explanation:

i hope this helps :)

Answer:

12a-16a =-4a

26b -4b =22b

the final answer is-4a +22b

Answer:

in my opinion I think the answer the be "A"