Answer:
%C₁ = %C₂ = 50%
Explanation:
Set up simultaneous equations to solve for two unknowns,
let f₁ and f₂ = fractional abundances of C₁ and C₂ respectively.
Then f₁ + f₂ = 1.00 and
34.97f₁ + 36.97f₂ = Wt. Avg. Atomic Mass (amu) = (34.97 + 36.97)/2 = 35.97amu
Solve equation 1 for f₂ = 1 - f₁ and substitute into equation 2
=> 34.97f₁ + 36.97(1 - f₁) = 35.97
=> 34.97f₁ + 36.97 - 36.97f₁ = 35.97
=> 2f₁ = 1
=> f₁ = 1/2 = 0.50 => 50% abundance for C₁
=> f₂ = 1 - 0.50 = 0.50 => 50% abundance for C₂
Using your own words, explain energy.
✓ What kind of carbon storages would be the most affected by humans?
Answer: Burning fuels?
Explanation: I’m not very sure actually
How many grams of BaCl2 can be made from 6 moles of Ba?
Answer:
823.98
Explanation:
Since there is only one Ba per atom you simply times 1 by 6 to get the number of mols of Ba per atom, then you times this by the atomic mass of Ba on the periodic table
How many grams of Fe2O3 are formed when 51.3 grams of iron, Fe, react completely with oxygen, O2? 4 Fe + 3 O2 --> 2 Fe2O3
The Fe is our limiting reactant here. First, convert the mass of Fe given to moles of Fe by dividing mass by the molar mass:
(51.3 g Fe)/(55.845 g/mol) = 0.9186 mol Fe.
According to the balanced equation, 2 moles of Fe2O3 are produced for every 4 moles of Fe that are consumed. In other words, half as many moles of Fe2O3 will be produced as there are Fe that react:
(0.9186 mol Fe)(2 mol Fe2O3/4 mol Fe) = 0.4593 mol Fe2O3.
Finally, convert the moles of Fe2O3 back to grams by multiplying by the molar mass of Fe2O3:
(0.4593 mol Fe2O3)(159.6882 g/mol) = 73.3 g Fe2O3.
So, 73.3 grams of Fe2O3 are formed.
____________ is refining the extracted raw metals into a purest form
Answer:
Extractive metallurgy
Explanation:
Extractive metallurgy is the practice of removing valuable metals from an ore and refining the extracted raw metals into a purer form.
HELP ASAP!!!
WAVES ALWAYS ORIGINATE WITH SOME
a
person
b
object
C
disturbance
Answer:
Disturbance
Explanation:
I believe it is Disturbance because waves are normally caused by wind, and wind classifies as Disturbance.
PLEASEEEE HELPPP??????
Answer:
(B) Grasses to Grasshoppers to Birds to Foxes
Explanation
How is the periodic table used to determine properties of elements
Answer:
I don't know
Explanation:
hindi ko alam
Una solución hallar punto de vista física y punto de vista químico (sal) 50g de sal y 250 ml de agua hallar %m/m %m/v molalidad, molaridad, fracción molar del soluto y del solvente
Answer:
% m/m = 16.6%
% m/v = 20%
3.42 m (molalidad)
3.42 M (molaridad)
Fraccion molar del soluto = 0.06
Fraccion molar del solvente = 0.94
Explanation:
Nuestra solución está compuesta por:
Soluto: 50 g de sal
Solvente: 250 mL de agua.
%m/m %m/v molalidad, molaridad, fracción molar del soluto y del solvente son distintas formas de definir la concentración:
% m/m son los gramos de soluto cada 100 g de solución.
No sabemos la masa de solución pero con la densidad del agua (solvente), sabemos que los 250 mL contienen 250 gramos de solvente. (Densidad del agua 1g/mL). En conclusión, la masa de solución es 50 g + 250g = 300
% m/m = (50g /300g ) . 100 = 16.6%
Vamos a definir que el volumen de la solución es igual al del solvente: 250 mL.
% m/v = la masa de soluto, cada 100 mL de solución
= (50 /250) . 100 = 20 %
Molalidad, son los moles de soluto por cada kg de solvente.
Convertimos gramos a kg → 250 g . 1kg /1000g = 0.25kg
Convertimos la masa de soluto (sal) a moles.
NaCl → 50 g . 1mol/ 58.45g = 0.855 moles
m = 0.855 /0.25 → 3.42 m (molalidad)
Molaridad son los moles de soluto por cada L de solución.
Convertimos mL a L → 250 mL . 1kg / 1000mL = 0.25 L
sabiendo que los moles de soluto son 0.855, en este caso la molaridad es igual a la molalidad ( 3.42 M)
Para calcular la fracción molar, necesitamos moles de soluto y de solvente.
Ya contamos con los moles de soluto.
Moles de solvente: 250 g . 1mol /18g = 13.89 mol
Moles totales = 0.855 + 13.89 = 14.745
Fracion molar del soluto: (0.855/ 14.745) = 0.06
Fraccion molar del solvente: (13.89 / 14.745) = 0.94
Describe a method to investigate how the temperature changes when different masses of ammonium nitrate are dissolved in water
Answer:
Endothermic and Exothermic Reactions
Endothermic and Exothermic ReactionsIn this experiment you are investigating whether dissolving ammonium nitrate in water is an endothermic or exothermic reaction. An endothermic reaction absorbs energy from its surroundings (heat), so the reaction gets colder.
Explanation:
Don't forget to mark me as brainliest answer ☺
Why is nuclear fusion not used to produce electricity?
O A. Fusion requires conditions that exist only in the cores of stars.
B. Fusion produces nuclear waste.
C. Fusion requires steam turbines, which are expensive.
D. Fusion produces only a small amount of energy.
Answer: A is correct for ape.x
Explanation:
Nuclear fusion not used to produce electricity because fusion requires conditions that exist only in the cores of stars. Hence option A is correct.
What is nuclear fusion?Nuclear fusion is defined as the process that produces a single heavier atomic nucleus from the union of two lighter ones while releasing enormous quantities of energy. Controlled atom fusion generates around four million times as much energy as controlled nuclear fission and chemical processes like burning coal, oil, or gas.
Normal electrostatic interactions between positively charged nuclei prohibit them from coming close enough to collide and allow fusion to happen, hence fusion is not feasible. Fusion might be used to generate electricity economically if there was a sufficiently big and sustained energy "profit".
Thus, nuclear fusion not used to produce electricity because fusion requires conditions that exist only in the cores of stars. Hence option A is correct.
To learn more about nuclear fusion, refer to the link below:
https://brainly.com/question/12701636
#SPJ2
solid sodium chloride is dissolved in water. the sodium chloride solution is electrolysed in the apparatus. state why sodium chloride solution , rather than solid chloride must be used in this experiment.
Answer: water solutions conducts charge
Explanation: solid sodium chloride is n insulator.NaCl is dissolved in water
In ionic forms. In solution there are Na+ and Cl- ions which can transfer charge.
please answer thx will mark brainliest if correct
Answer:
C
Explanation:
Gases have lowest forces of attraction.
The complete
conversion of 90.0
grams of hydrogen to
ammonia would require
how many moles of
nitrogen gas?
Answer:
15moles
Explanation:
The balanced equation of this reaction is as follows:
N2 + 3H2 → 2NH3
Molar mass of H2 = 2g/mol
mole = mass/molar mass
mole = 90/2
mole = 45moles.
Based on the above balanced equation, 1 mole of nitrogen gas (N2) reacts with 3 moles of hydrogen gas (H2)
Hence, 45moles of hydrogen gas will produce (45 × ⅓) = 15moles of nitrogen gas (N2).
Answer:
Its 14.9 for those who are doing the escape room :)
Explanation:
Which statement describes proper conduct in the laboratory?
Select one:
O a. Eating snacks in the laboratory is allowed.
O b. In order to identify things they should be tasted.
O c. Colorless fumes should be identified by direct smelling.
O d. Be aware of the location of safety and first aid equipment.
Answer:
D.
Explanation:
I mean. It's logic for sure
Answer:
Its D and pls mark brainliest
Explanation:
What is simple chemical test could you carry out to see if carbon dioxide has been produced
Carbon Dioxide
A positive test will result in the lime water turning milky. Lime water turns milky as the Calcium hydroxide (chemical name for limewater) reacts with carbon dioxide to form Calcium Carbonate which is insoluble in water and thus forms a milky white precipitate.
What are the controlled, independent, and dependent variables in a basic density column experiment?
WILL MAKE BRAINLIEST
Answer:
The Independent Variable is what we change or control in the experiment. The Dependent Variable is what we are testing and will be measured in the experiment. The Control Variables are what we keep the same during the experiment to make sure it's a fair test. hope this helps =)
Explanation:
DESPERATE!!!!! What is the molar mass of an unknown gas that has a density of 2.29 g/L at a pressure of 0.75 atm and a temperature of 88. degrees Celsius?
Answer:
The molar mass of the gas is 90.4g/mol
Explanation:
To solve this question we have to use the equation:
d = PM / RT
Where d is density of the gas = 2.29g/L
P is pressure = 0.75atm
M is molar mass of the gas = ??
R is gas constant = 0.082atmL/molK
T is absolute temperature = 88°C + 273.15 = 361.15K
Solving for M:
dRT / P = M
2.29L*0.082atmL/molK*361.15K / 0.75atm = M
90.4g/mol = M
The molar mass of the gas is 90.4g/mol
Why do you think it is a bad idea to use taste, touch, or smell to identify an
unknown chemical?
Answer:
Because it can cause health problems or injuries to our sense organs.
Explanation:
Chemicals in the laboratory are made up of different constituents, which may be dangerous or injurious to health. This is the reason why safety measures or precautions have to be taken when working in the laboratory. One of those safety measures is that "one should never use taste, touch, or smell to identify an unknown chemical".
This is so because a chemical that is unknown amounts to the fact that what such chemical contains is unknown, hence, the chemical might have the ability to cause harm or injuries to the sense organ. For example, a conc. acid that is tasted will burn the tongue etc.
लेख्नुहोस् । (Deserts are very hot during the day and very cold
during the night. Give reason.)
Because deserts have such little water vapor in the air, it makes it harder to trap heat or cold in a desert. And at night, the sun no longer heats the desert and the heat from the day doesn't stay trapped. Because of this, some deserts can get extremely cold at night, dropping to temperatures below 40F.
Hope this helps!! Have a wonderful day!!
It is actually sand, which turns the entire phenomenon hot. Sand cannot hold the heat. It acts like a mirror to the sun. During the daytime, it stays warm, and when the Sun is absent it loses all its heat making the nights colder. There’s nothing in the desert that can either absorb heat from the sun or hold it on the surface when the sun is set.
HURRY ILL GIVE BRAINLIEST!
Match the cause to its effect.
Answer:
Cattles are giving nutrition supply throughout the year----some animals require nutrient enhancement for health
calves are given colostrum at birth----newborns require antibodies from their mothers
I dont want to write, so you know what the last option is
Explanation:
:) hope this helps
CH4O+ O2 → CO2 + H2O
Balance the following chemical equation
Answer:
2 CH4O + 3 O2 = 2 CO2 + 4 H2O
N2(g) + 2 O2(g) → 2 NO2(g)
Answer
Answer:
180.6
Explanation:
N2 (g) + 2O2 (g) → 2NO2 (g) ΔH = 66.4 kJ
2NO (g) + O2 (g) → 2NO2 (g) ΔH = -114.2 kJ
Hope this helped, and please mark as Brainliest :)
ennolno nsr svi5691 som i 1sq0o
The copper chloride solution used in the investigation contained 300 grams per dm of
solid CuCl2 dissolved in 1 dm of water.
The student used 50 cm of copper chloride solution in each experiment.
Calculate the mass of solid copper chloride used in each experiment.
[3 marks]
⚠️NO LINKS⚠️(it will get reported)
In a lab, students measured the mass of an unknown metal to be 46.4 g. The metal sample releases 769 J when it is cooled from 101.0°C to 30,00 °C, the
metal is most likely
Lead
. Copper
Mercury
Silver
Answer:
I'm thinking cooper but not sure
What does chlorination do?
Answer: Chlorination is the process of adding chlorine to drinking water to kill parasites, bacteria, and viruses. Different processes can be used to achieve safe levels of chlorine in drinking water.
Which are different structures of the eye? Select four options.
please help !!!!!!!!
pupil
cochlea
cornea
auricle
retina
lens
Answer:
Pupil, Cornea, Retina, and Lens
Explanation:
A sample of hydrogen gas has a volume of 145 mL when measured at 44
degrees C and 1.47 atm. What volume would the hydrogen sample occupy
at STP?
Answer:
[tex]186.01\ \text{mL}[/tex]
Explanation:
[tex]P_1[/tex] = Initial pressure = 1.47 atm
[tex]P_2[/tex] = Final pressure = [tex]10^5\ \text{Pa}[/tex]
[tex]T_1[/tex] = Initial temperature = [tex]44^{\circ}\text{C}[/tex]
[tex]T_2[/tex] = Final temperature = [tex]273.15\ \text{K}[/tex]
[tex]V_1[/tex] = Initial volume = 145 mL
[tex]V_2[/tex] = Final volume
We have the relation
[tex]\dfrac{P_1V_1}{T_1}=\dfrac{P_2V_2}{T_2}\\\Rightarrow V_2=\dfrac{P_1V_1T_2}{T_1P_2}\\\Rightarrow V_2=\dfrac{1.47\times 101325\times 145\times 273.15}{(44+273.15)\times 10^5}\\\Rightarrow V_2=186.01\ \text{mL}[/tex]
Final volume of the sample is [tex]186.01\ \text{mL}[/tex].
CH3OH can be synthesized by the reaction:
CO(g) + 2 H20) — CH3OH)
What volume of CH3OH gas (in L) can be synthesized if 18.6 L of Hy gas completely reacts at STP conditions?
Answer:
5
Explanation:
Ralph's friend invited him to attend a hard rock concert. Ralph did not want to go because he assumed other people who attended would be aggressive and unruly. Ralph's attitude is BEST described as an example of
prejudice
ambiguity
nonconformity
discrimination
impression formation
Answer:
Prejudice
Explanation:
Answer: your answer would be prejudice.