Answer:
True every culture is diffrent and culture is the way to grow up, the people or things you live around, or the ways of life you follow or dress.
Explanation: The definition of culture is: means a particular set of customs, morals, codes and traditions from a specific time and place. All of that develops how a person may behave in society.
Answer:
true
Explanation:
just took the quiz
a 6 letter word a way of explaining an object or event using a set of facts
Explanation:
A theory is a way of explaining an object or event using a set of facts.
1. Analogies exist between rotational and translational physical quantities. Identify the rotational term analogous to each of the following: acceleration, force, mass, work, translational kinetic energy, linear momentum, impulse.
2. Explain why centripetal acceleration changes the direction of velocity in circular motion but not its magnitude.
Answer:
1) a α, m I, W=F.d W =τ . θ,
2) a = v²/r
Explanation:
1) The amounts of rotational and translational motion are related
acceleration is
a = d²x / dt²
linear displacement is equivalent to angular rotation, therefore angular acceleration is
α = d²θ / dt²
force in linear motion is equivalent to moment in endowment motion
F = m a
τ = I α
the mass is the inertia of the translation, in rotational motion the moment of inertia is the rotational inertia
I = m r²
Work is defined by W = F. d
in rotation it is defined by W = τ . θ
The linear momentum is p = mv
the angular momentum L = I w
momentum the linear motion is I = F dt
in the rotation it is I = τ dt
2) The velocity is a vector therefore it has modulus and direction, linear acceleration changes the modulus of velocity, whereas circular motion changes the direction (the other element of the vector).
[tex]a_{c}[/tex]Ac = v²/r
Proved that
V = u+at
Answer:
[tex]\sf Proof \ below[/tex]
Explanation:
We know that acceleration is change in velocity over time.
[tex]\sf a=\frac{\triangle v}{t}[/tex]
[tex]\sf a=\frac{v-u}{t}[/tex]
v is the final velocity and u is the initial velocity.
Solve for v.
Multiply both sides by t.
[tex]\sf at=v-u[/tex]
Add u to both sides.
[tex]\sf at + u=v[/tex]
Answer:
Acceleration = v-u/t when we flip -u and t to right hand side
then -u changes to plus and denominator t changes to numerator
then then this equations becomes v=u+at
Explanation:
a skydiver jumped out of a plane and fell 9 miles to the ground. his average speed while falling was 174 miles/hour. how much time did the dive last?
Answer:
t = 0.051 seconds
Explanation:
Given that,
A skydiver jumped out of a plane and fell 9 miles to the ground. It means 9 miles is the distance covered.
The average speed of the skydiver is 174 miles/hour
We need to find the time for which he dive last. It means t is the time taken. Total distance covered divided by time taken is called average speed. So,
[tex]v=\dfrac{d}{t}\\\\t=\dfrac{d}{v}\\\\t=\dfrac{9}{174}\\\\t=0.051\ s[/tex]
So, a skydiver dive for 0.051 seconds.
List the submultiples and multiple units of length, mass, and time with respect to real-life situations. How are these units are related to S I unit of the above mentioned physical quantity?
Answer:
Explanation:
In physics, there are two types of physical quantities namely the fundamental and the derived quantities. Fundamental quantities are independent quantities on which derived quantities depends on. Length, mass and time are examples of fundamental quantities.
The SI unit of length is meters. A meter is a multiple unit. Its submultiple units are centimetres (10⁻²metres), kilometres (10³metres), decimetres (10⁻¹metres) etc
The SI unit of mass is kilogram (kg). The only sub multiple unit used in real-life situation is grams.
1 kg = 100 grams
The SI unit of time is seconds. The multiple units are the minutes, hours, weeks, days and years.
1 minute = 60 seconds
1 hour = 3600 seconds
1 day = 24 * 3600 = 86,400 secs
We have seen that starlight passing through the interstellar medium is dimmed and reddened. Look at the photo of a sunset on Earth. The Sun’s light also appears reddish at sunset. Given your understanding of the reddening of starlight, why do you think sunsets appear red?
Answer:
Explanation:
Reddening of sun's rays at sunset and sunrise is due to scattering of light . The white light consisting of seven colours coming from the sun are scattered in different directions when they fall on the air particles present in atmosphere . Red coloured light scatters least and it travels straight forward to the viewer on the earth . On the other hand other colours scatter most and therefore they go out of area of vision for the viewer on the earth . Since only red colour reaches the eye of the viewer , sun's ray appear red . This happens during sunrise and sunset . It is so because during this period , sun rays travel far greater distance through atmosphere , so scattering is most pronounced .
A ray of light is projected into a glass tube that is surrounded by air. The glass has an index of refraction of 1.50 and air has an index of refraction of 1.00. At what minimum angle will light in the glass tube be totally reflected at the glass/air interface?
Answer:
θ = 41.8º
Explanation:
This is an internal total reflection exercise, the equation that describes this process is
sin θ = n₂ / n₁
where n₂ is the index of the incident medium and n₁ the other medium must be met n₁> n₂
θ = sin⁻¹ n₂ / n₁
let's calculate
θ = sin⁻¹ (1.00 / 1.50)
θ = 41.8º
What rule should be used to transform a table of data to represent the
reflection of f(x) over the yaxis?
Answer:
Multiply the x values with -1.
Explanation:
By multiplying the numbers by one, you are changing them to be the opposite of their original state.
You multiply the numbers that are in the x-value column because you are reflecting the image over the y-axis.
Hope this helped and good luck!
Answer:
Multiply each x-value in the table by -1
Explanation:
A car engine burns gas at 495 K and exhausts to the air at 293 K. What is the highest possible efficiency it could have?
(NO UNIT)
Answer:
59.19%
Explanation:
Step 1:
Data obtained from the question. This include the following:
Input temperature = 495 K.
Output temperature = 293 K.
Efficiency =..?
Step 2:
Determination of the efficiency of the engine.
Efficiency is simply defined as the ratio of output to input times 100. Mathematically, it is expressed as:
Efficiency = output /input x 100
With the above formula, we can calculate the efficiency of the engine as follow:
Input temperature = 495 K.
Output temperature = 293 K.
Efficiency =..?
Efficiency = output /input x 100
Efficiency = 293/495 x 100
Efficiency = 59.19%
Therefore, the efficiency of the engine is 59.19%
Answer:
0.41
Explanation:
Trust me bro
A 24 cm radius aluminum ball is immersed in water. Calculate the thrust you suffer and the force. Knowing that the density of aluminum is 2698.4 kg / m3
Answer:
W =1562.53 N
Explanation:
It is given that,
Radius of the aluminium ball, r = 24 cm = 0.24 m
The density of Aluminium, [tex]d=2698.4\ kg/m^3[/tex]
We need to find the thrust and the force. The mass of the liquid displaced is given by :
[tex]m=dV[/tex]
V is volume
Weight of the displaced liquid
W = mg
[tex]W=dVg[/tex]
So,
[tex]W=dg\times \dfrac{4}{3}\pi r^3\\\\W=2698.4\times 10\times \dfrac{4}{3}\times \pi \times (0.24)^3\\\\W=1562.53\ N[/tex]
So, the thrust and the force is 1562.53 N.
A carpenter measured the lengeth of a small piece of timber as 24.6cm .Calculate the relative error in the measurement if the true length is 24.5cm
ANSWER:
0.4081%
Explanation:
Difference=24.6-24.5=0.1
Relative error = 0.1/24.5*100=0.4081%
Relative error is equal to the = difference between both the values/The true value *100
Q. A train accelerates from 36 km/h to 54 km/h in 10 sec. (i) Acceleration (ii) The distance travelled by car.
u=10m/s
v=15m/s
acceleration=
v_u/ t
5/10
0.5
By starting with a falsifiable hypothesis and proceeding to gather data and ensure replicability, a scientist can contribute to the potential formation of a(n)
Answer:
theory
Explanation:
A scientist can contribute to the formation of a theory in a particular subject by conducting research along the line of that subject.
Conducting research requires the formation of a hypothesis and testing the hypothesis by conducting a relevant experiment during which data are gathered, analyzed, and interpreted in order to falsify or accept the hypothesis.
A good experiment must be replicate-able. When the same experiment is repeated by different independent researchers and the same conclusion is arrived at, this could potentially lead to the formation of a theory.
Hence, a scientist can contribute to the formation of a theory by conducting an experiment with replicability in order to test a hypothesis.
Two men, Joel and Jerry, each pushes an object that are identical on a horizontal frictionless floor starting from rest. Joel and Jerry are using the same force F. Jerry stops after 10 min, while Joel is able to push for 5.0 min longer. Compare the work they do.
Answer:
The work done by Joel is greater than the work done by Jerry.
Explanation:
Let suppose that forces are parallel or antiparallel to the direction of motion. Given that Joel and Jerry exert constant forces on the object, the definition of work can be simplified as:
[tex]W = F\cdot \Delta s[/tex]
Where:
[tex]W[/tex] - Work, measured in joules.
[tex]F[/tex] - Force exerted on the object, measured in newtons.
[tex]\Delta s[/tex] - Travelled distance by the object, measured in meters.
During the first 10 minutes, the net work exerted on the object is zero. That is:
[tex]W_{net} = W_{Joel} - W_{Jerry}[/tex]
[tex]W_{net} = F\cdot \Delta s - F\cdot \Delta s[/tex]
[tex]W_{net} = (F-F)\cdot \Delta s[/tex]
[tex]W_{net} = 0\cdot \Delta s[/tex]
[tex]W_{net} = 0\,J[/tex]
In exchange, the net work in the next 5 minutes is the work done by Joel on the object:
[tex]W_{net} = W_{Joel}[/tex]
[tex]W_{net} = F\cdot \Delta s[/tex]
Hence, the work done by Joel is greater than the work done by Jerry.
Which statement describes one feature of a closed circuit? Charges do not flow. Bulbs will not shine. The circuit is broken. The circuit is complete.
I inferred you've referring to a close electrical circuit.
Answer:
The circuit is complete.
Explanation:
A closed electrical circuit is indeed a complete circuit. Also, it allows charges to flow, the bulbs in the circuit will shine and it is not broken.
It is termed closed circuit because there is no brokage in the series of electrical wires or the switch; which may prevent the free flow of current or charges. Thus, a feature that marks closed circuits is that they are complete.
Answer:
The circuit is complete.
Explanation:
Velocity is a description of an object’s blank
Velocity is the description of an object's motion from one point to another.
It tells the speed with which the trip is completed, and the direction from the start-point to the end-point. It tells nothing about any twists, turns, loops, bends, or stops along the way.
What happens when white light shines through a translucent, red, glass window? a) All colors of light except red are transmitted through the glass. b) Red light is transmitted through and reflected by the glass c) Red light is absorbed by the glass d) all colors except red are reflected by the glass
Answer:
b. Red light is transmitted through and reflected by the glass
Explanation:
Give me brainliest plz!
All of the wavelengths of the red light are absorbed when it passes through a translucent red glass window, but the red light is transmitted and reflected.
What happens when white light shines through red glass?Red light emerges from the other side of a white light source that has been passed through a red filter. This is so that only red light can pass through the red filter. The spectrum's other colors (wavelengths) are absorbed. Similar to this, a green filter only lets through green light.White light is colorless light that contains all the wavelengths of the visible spectrum. Only specific wavelengths of white light are filtered through transparent or translucent things.Through a colorful glass, white light shines through. Except for the color it is shining through, all light wavelengths are absorbed by the glass.Therefore, if the red light passes through a translucent, red, glass, window, all the wavelengths are absorbed but the red light is transmitted and reflected.
Therefore, the correct answer is option b) Red light is transmitted through and reflected by the glass.
To learn more about light refer to:
https://brainly.com/question/12002703
#SPJ2
Three books are at rest, in equilibrium, on a horizontal table as
shown. The weight of each book, which is equal to the force
gravity exerts in the downward direction, is given. What is the
net force on the middle book?
Answer:
Net force = 0
Explanation:
Short answer: if the middle book is not acceleration in any direction, the net force is zero.
Long answer: refer to the attached free-body diagram (FBD) to see why the net force is zero. Skills to draw FBD are essential in solving problems in statics.
Top book exerts -mg (downwards) on the middle book.
Middle book exerts -mg (downwards) on the bottom book.
Total downward force is -mg-mg = -2mg
By Newton's third law, when an object is not in motion, reaction equals action of -2mg in the opposite direction, therefore the reaction (upwards) is +2mg.
This makes the net force of -2mg (downwards) + 2mg (upwards) =0
On a horizontal table, three books are resting and balanced. The net force on the middle book will be equal to zero.
What is equilibrium?Equilibrium is the condition of an object when two or more opposing forces, whether internal, external or a combination of both, act on the body and cancel one another out to maintain the object in the same state as it was. The Latin term for weight or balance, libra, serves as the origin of the word equilibrium.
According to the question :
The net force is 0 if the middle book does not accelerate in any direction.
The Middle book is impacted negatively (downwards) by the top book.
The middle book pulls down on the lower book by -mg.
The total downward force is -2mg = (-mg-mg)
According to Newton's third rule, a reaction when an item is not moving equals an action of -2mg in the opposite direction, hence the reaction (upwards) is a response of +2mg.
Consequently, the net force of -2mg (downwards) + 2mg (upwards) = 0 is created.
To get more information about Equilibrium :
https://brainly.com/question/28527601
#SPJ2
Question 1 of 10
What is a neutron
A. A particle inside the nucleus that has no charge
B. A positive particle inside the nucleus
O C. A negative particle outside the nucleus
O D. A negative particle inside the nucleus
Answer:
The neutron is a subatomic particle, symbol
n
or
n0
, with no electric charge and a mass slightly greater than that of a proton. Protons and neutrons constitute the nuclei of atoms. Since protons and neutrons behave similarly within the nucleus, and each has a mass of approximately one atomic mass unit, they are both referred to as nucleons.[6] Their properties and interactions are described by nuclear physics.
Explanation:
pls mark me as BRAINLIEST
Research have found that other than for reasons of hunger, American women eat when they are depressed ,whereas Japanese women eat because of social demands.They found no significant differences between american and japanese men. These results demonstrate that ________ and _______ must be taken into account when studying why and under what circumstances people eat.
Answer:
culture
food
Explanation:
The above mentioned studied the interaction between food and culture. Food habits reflect different meanings in different cultures. As per the question, the United States America and Japan are two countries far away from each other, which have distinct cultures and gave rise to different eating norms. However, the impact of media have been shaping the eating patterns around the globe, which have brought different food and cultures together.
calculate the energy dissipated by an electric iron which draws a current of 5A from a240v power supply for 25minutes
Explanation:
Given,
I = 5 A
V = 240 V
T = 25 mins = 1500 sec
Now,
Energy dissipated = IVT= 5×240×1500 = 1800000 J
Which of the following object is in dynamic equilibrium?
Answer:
A car driving in a straight line 20 m/s
Explanation:
ayepecks silly
A very thin film of soap, of thickness 170 nm, in between air seems dark. On the other hand, when placed on top of glass some visible light is seen to shine from the film. How can this happen and what is the smallest visible light that creates constructive interference when we place the film on top of glass
Answer:
λ₀ = 2 d n
Explanation:
A soap film is a layer where the lus is reflected on the surface and on the inside of the film, these two reflected rays can interfere with each other either constructively or destructively.
Let's analyze the general conditions of this interference,
* When the ray of light reaches the surface of the film it is reflected, as the index of refraction of the air is less than the index of the film, the reflected ray has a phase change of 180º
* When the ray penetrates the film, its wavelength changes due to the refractive index of the film.
λ = λ₀ / n
where lick is the wavelength in the vacuum or air and n index of refraction of the film, in general this interference is observed perpendicular to the film, so the sine veils 1. the expression for constructive interference taking in what previous remains
2d = (m + ½) λ
the expression for destructive interference remains
2d = m λ
2d = m λ₀ / n
When the film is placed on a glass plate whose index of refraction is greater than the index of refraction of the film, in the reflection in the lower part of the film another phase difference of 180º is created, for which we have a difference of total phase of 180 +180 = 360º, which is equivalent to no phase difference, therefore the two previous equations are interchanged.
Therefore where we had destructive interference now a cosntructive interference happens we can see the reflected light.
Find us the wavelength that this constructive interference creates
2d n = m λ₀
λ₀ = 2 d n / m
To find the minimum wavelength, suppose we observe the first interference pattern m = 1
λ₀ = 2 d n
where d is the thickness of the film and n the index of refraction of the same
Two kilograms of nitrogen (N2) at 25°C is contained in a 0.62 m3 rigid tank. This tank is connected by a valve to a 0.16 m3 rigid tank containing 0.8 kg of oxygen (O2) at 127°C. The valve is opened, and the gases are allowed to mix, achieving an equilibrium state at 87°C.
initial pressures of N2 is 5.7293 bar and O2 is 5.2 bar.
the final pressure is 6.44 bar.
the magnitude of the heat transfer for the process is 162.8 kJ, and the direction of energy flow is going in.
What is the entropy change for the mixing process, in kJ/K?
Answer:
Explanation:
For entropy change the formula is
ΔS = ΔQ / T
ΔQ = Δ H
ΔS = Δ H / T
Given
Δ H = + 162.8 kJ
We can take equilibrium temperature as average temperature of the whole process
So, T = 273 + 87 = 360 K
ΔS = Δ H / T
= 162.8 kJ / 360
= + 0.508 kJ / K .
When the magnitude of the heat transfer for the process is 162.8 kJ, Then the entropy change for the mixing process, in kJ/K is = + 0.508 kJ / K
What is Entropy change?
For The entropy change, the formula is
Then ΔS = ΔQ / T
After that ΔQ = Δ H
Then ΔS = Δ H / T
Given as per question are:
Then Δ H = + 162.8 kJ
Now We can take equilibrium temperature as average temperature of the whole process are:
So, T is = 273 + 87 = 360 K
Then ΔS = Δ H / T
After that = 162.8 kJ / 360
Therefore, = + 0.508 kJ / K.
Find more information about Entropy change here:
https://brainly.com/question/17241209
A plane drops a package for delivery. The plane is flying horizontally at a speed of 120m/s,and the package travels 255 m horizontally during the drop. We can ignore air resistance.What is the package's vertical displacement during the drop?
Answer:
Package's vertical displacement(s) = 22.12 meter
Explanation:
Given:
Speed of plane = 120 m/s
Total distance = 255 m
Find:
Package's vertical displacement(s)
Computation:
Time taken = Distance / Speed
Time taken = Total distance / Speed of plane
Time taken = 255 / 120
Time taken = 2.125 s
Acceleration due to gravity(g) = 9.8 m/s²
Initial velocity (u) = 0
So,
Package's vertical displacement(s) = ut + (1/2)gt²
Package's vertical displacement(s) = (0)(2.125) + (1/2)(9.8)(2.125)²
Package's vertical displacement(s) = 22.12 meter
Answer: -22.1
Explanation:
I just did the Khan Academy and that was the answer, not the one provided by that one person. :)))
Which of the following statements describes nucleons?
A. Nucleons are the particles that make up a nucleus.
B. Nucleons are the particles in an atom that are neutral.
C. Nucleons are the particles that make up an atom.
D. Nucleons are the particles in an atom that have a charge.
Answer: nucleons are the particles that make up in nucleus
Explanation:
Nucleons are the particles that make up a nucleus, and they include protons and neutrons.
What are nucleons?Nucleons are particles that make up nucleus of an atom. They include either proton or neutron, or both found in atomic nucleus.
Generally, nucleons are subatomic particles found within nucleus of an atom.
Therefore, we can conclude that, nucleons are the particles that make up a nucleus.
Learn more about nucleons here: https://brainly.com/question/12582292
#SPJ2
Janaki Temple and Pashupatinath Temple are increasing our pride how
Answer:
Janaki temple and Pashupatinath Temple are found in Nepal. These structures are religious and they increase the pride of the country through tourism. These temples are important in the country and are mostly visited by tourists.
This also helps to bring in income for the country and also helps by attracting many visitors and a corresponding development of its tourism industry.
Find the mass. 10 points. Will give brainliest.
Answer:
3.94 kgExplanation:
Given,
Force ( f ) = 30 N
Acceleration(a) = 7.6 m/s
Now, Let's find the mass of the ball
Using the Newton's second law of motion:
We get:
[tex]force \: = mass \: \times acceleration[/tex]
plug the value
[tex]30 \: = m \: \times 7.6[/tex]
Use the commutative property to reorder the terms
[tex] 30 = 7.6 \: m[/tex]
Swap the sides of the equation
[tex]7.6m = 30[/tex]
Divide both sides of the equation by 7.6
[tex] \frac{7.6 \: m}{7.6} = \frac{30}{7.6} [/tex]
Calculate
[tex]m = 3.94 \: kg[/tex]
Hope this helps..
Best regards!!
Answer:
[tex]\displaystyle \boxed{\mathrm{3.95 \: kg }}[/tex]
Explanation:
[tex]\mathrm{force \: (N) = mass \: (kg) \times acceleration \: (m/s^2)}[/tex]
[tex]\mathrm{force = 30N}[/tex]
[tex]\mathrm{acceleration = 7.6 \: m/s^2 }[/tex]
[tex]\mathrm{Find \: the \: mass.}[/tex]
[tex]\mathrm{30 = m \times 7.6}[/tex]
[tex]\displaystyle \mathrm{m =\frac{30}{7.6} }[/tex]
[tex]\displaystyle \mathrm{m = 3.947... }[/tex]
A uniform string of length 10.0 m and weight 0.32 N is attached to the ceiling. A weight of 1.00 kN hangs from its lower end. The lower end of the string is suddenly displaced horizontally. How long does it take the resulting wave pulse to travel to the upper end
Answer: 0.0180701 s
Explanation:
Given the following :
Length of string (L) = 10 m
Weight of string (W) = 0.32 N
Weight attached to lower end = 1kN = 1×10^3
Using the relation:
Time (t) = √ (weight of string * Length) / weight attached to lower end * acceleration due to gravity
g = acceleration due to gravity = 9.8m/s^2
Weight of string = 0.32N
Time(t) = √ (0.32 * 10) / [(1*10^3) * (9.8)]
Time = √3.2 / 9800
= √0.0003265
= 0.0180701s
How does increasing frequency affect the crests of a wave?
They get higher.
They get closer together.
They get lower.
They get farther apart.
Answer:
they get closer together
Explanation: