Answer:
Yes because all solids have some thermal energy, its atoms do vibrate. However, this movement is very small and very rapid, and cannot be observed under ordinary conditions. When heat is added a solid can become a liquid.
Explanation:
Have A Wonderful Day !!
A stone weighs 105 lb in air. When submerged in water, it weighs 67.0 lb. Find the volume and specific gravity of the stone.
Write the full electron configuration of calcium.
152 2s22p6 352 4s2
Use the electron configuration to predict the most likely oxidation state of calcium?
(Explain your answer please)
Answer: [tex]1s^22s^22p^63s^23p^64s^2[/tex] , oxidation state = +2
Explanation:
Electronic configuration represents the total number of electrons that a neutral element contains. We add all the superscripts to know the number of electrons in an atom. The electrons are filled according to Afbau's rule in order of increasing energies.
The electronic configuartion of Calcium with atomic number 20 is :
[tex]Ca:20:1s^22s^22p^63s^23p^64s^2[/tex]
As calcium can easily lose its two valence electrons to attain stability , its oxidation state is +2.
[tex]Ca^{2+}:18:1s^22s^22p^63s^23p^6[/tex]
How many molecules are contained in 78.41 L of Ne
Calculate the amount of heat released when one bottle (250 g) of water is cooled from 25°C to 30°C. The specific heat of water is 4.18 J/g°C.
Answer: the answer is a
Explanation: glad we have the same troubles Rn hahah
A solenoid is a coil of wire that produces a magnetic field when carrying an electric current. The strength of the magnetic field
produced by a solenoid can be increased in two basic ways: increasing the number of loops in the solenoid or increasing the
amount of current running through the solenoid. A solenoid's magnetic field can be increased to an even greater degree by wrapping
the wire around a material that can be magnetized. Four solenoids are shown below.
000000000000000
Solenoid A
Copper Wire Only
Current: 6 amps
Solenoid B
Copper Wire Only
Current: 8 amps
que
ཤགས་
Solenoid C
Copper Wire + Iron Core
Current: 6 amps
Solenoid D
Copper Wire + Iron Core
Current: 8 amps
Based on the strength of the magnetic fields they produce, arrange the solenoids from strongest to weakest.
Solenoid A
Solenoid B
Solenoid C
Solenoid D
Answer: Motion, providing a burst of power that can move a specific part of the device.
Explanation: Hope this helps
Answer:
D > C > B> A
Explanation:
i solved this on study island
For the equation BaCl2 + Na2SO4 → BaSO4 + 2NaCl, how many chlorine atoms are on the reactants side and on the products side?
reactants: 1; products: 1
reactants: 1; products: 2
reactants: 2; products: 1
reactants: 2; products: 2
Answer:
The balanced chemical reaction is written as follows:
bacl2 + na2so4 → baso4 + 2nacl
Therefore, the number of chlorine atoms in the reactants side and the products side would be 2 atoms in both sides which should be the case because the number of atoms in each side should have the same number.
Explanation:
Internet
Using the model for the formation of Scandium Fluoride (an ionic compound), write the chemical formula.
Answer:
Sc3F3
I hope its help for you
Rolf prepares four solutions using different solutes as shown in the table below.
Which solution is unsaturated?
Solution A
Solution B
Solution C
Solution D
Answer:
Solution A
Explanation:
Correct on Edge Cumulative Review Exam 2021
Have a blessed day
The unsaturated solution is the one where, the amount solute is lower than the solubility at a specific temperature. Hence, the solution A will form an unsaturated solution.
What is unsaturated solution?Unsaturated solutions are those having the lower concentration of solute than the saturation point of the solvent. Whereas, a saturated solution will completely dissolve the solute in its maximum amount and beyond a point the solute cannot be dissolved.
At a specific temperature gradient, if the dissolved solute is equal to the solvent's saturation point it will form a saturated solution. From the given table it is clear that except solution A all solutions have higher amount of solute than the saturation point.
As the solute concentration is higher, the solvent will try to dissolve maximum amount of the solute. Hence, in solution A have only 20 g of solute added but its saturation point is 37 g/100g. THus, the solution forms an unsaturated solution.
To find more on unsaturated solution,refer here:
https://brainly.com/question/18997806
#SPJ6
_______________ are filled with special absorbing elements that move up and down between the uranium rods to keep the atoms from getting out of control.
Answer:
The correct answer is - control rods.
Explanation:
Control rods are filled with special absorbing agents such as boron, cadmium, silver, and others to absorb as many neutrons as to control the fission reaction by moving them up and down in between uranium rods.
These control rods are used to prevent the nuclear reaction from getting out of control in the nuclear plant or reactor by absorbing the neutrons and prevent uranium to convert.
A gold chain has a volume of 4cm3. The density of gold is 19.3 g/cm3. Calculate the mass of the gold chain. Which one is it ?
-4.8 grams
-23.3 grams
-0.21 grams
-77.2 grams
Which kind of bond is formed when two atoms share electorons to form a molecule
Answer:
Covalent bond is formed by mutual sharing of electrons between two atoms
Explanation:
help plzzzzzzzzzzzzzzz
Answer:
Blue is the metal Metals react by losing electrons from the outermost shell, which means their outermost electrons and now closer to the nucleus (one shell lower) and thus they get smaller when you go from metal atom to metal ion.
Explanation:
What do these words mean ?
a) filtrate
b) residue
I will give him or her brilliant and thank you
I need small and right answer.
Answer:
a) filtrate: a liquid which has passed through a filter.
Explanation:
the other one didnt pop up
Periodic Table Puzzle Test
Answer:
dfmpfndtngognjf
Explanation:
Which of the following pairs of compounds will react to form a precipitate? Why?
calcium chloride and silver nitrate
sodium iodide and potassium chloride
calcium chloride and sodium nitrate
Answer:
calcium chloride and silver nitrate
Explanation:
A precipitate is often formed in a double replacement reaction when the reaction yields an insoluble product.
Consider the reaction between calcium chloride and silver nitrate;
CaCl2(aq) + 2AgNO3(aq) -------->2AgCl(s) + Ca(NO3)2(aq)
AgCl is insoluble in water, hence the reaction leads to the formation of a precipitate.
magnesium has two naturally occurring isotopes: magnesium-24 and magnesium-25. if the average atomic mass of magnesium is 24.305 amu, what are the percent abundance's of each isotope?
a. 69.5% and 30.5%
b. 50% and 50%
c. 62% and 38%
d. 0.7% and 0.3%
e. .62% and .38%
Answer:
a. 69.5% and 30.5%
Explanation:
we know there are two naturally occurring isotopes of Mg, Mg-24 and Mg-25.
First of all we will set the fraction for both isotopes
X for the isotopes having mass 25
1-x for isotopes having mass 24
The average atomic mass of Mg is 24.305 amu.
we will use the following equation,
25x + 24 (1-x) = 24.305
25x + 24 - 24x = 24.305
25x- 24x = 24.305 - 24
1x = 0.305
x= 0.305 /1
x= 0.305
0.305 × 100 = 30.5 %
30.5 % is abundance of Mg-25 because we solve the fraction x.
now we will calculate the abundance of Mg-24.
(1-x)
1-0.305 =0.695
0.695 × 100 = 69.5%
69.5% for Mg-24.
how do enzymes help with digestion
Answer: Digestive enzymes play a key role in breaking down the food you eat. These proteins speed up chemical reactions that turn nutrients into substances that your digestive tract can absorb. Your saliva has digestive enzymes in it
Explanation:
what is the systematic name of NaCl
Answer:
The answer is Sodium chloride.
Na is sodium and Cl is chlorine.
If 525 N of force is applied to a 4.5
kg mass, how fast will it accelerate?
Answer:
121.11m/s²
Explanation:
Given parameters:
Force = 525N
Mass = 4.5kg
Unknown:
Acceleration = ?
Solution:
From Newton's second law of motion, we can find the solution to this problem. Using the expression below:
F = m x a
F is the force
m is the mass
a is the acceleration
So'
525 = 4.5 x acceleration
Acceleration = 121.11m/s²
What is the answer, and please make it fast.
Which characteristics describe most nonmetals in the solid phase?
1
They are malleable and have metallic luster.
2
They are malleable and lack metallic luster.
3
They are brittle and have metallic luster.
4
They are brittle and lack metallic luster.
Answer:
4
Explanation:
its a non-metal, dont get confused and pick number 1- it may seem like that’s the answer but remember here we are talking abut the solid phase!
Periodic table is divided into three metals, non metals and metalloids. The non metals are kept on the right side of the periodic table. Th correct option is option D.
What are non metals?Non metals are the element that have property to gain electron. When any element gain electron then element attain negative charge and that element is called anion. The examples of non metals are Oxygen, nitrogen, carbon, Fluorine etc.
The properties of non metals are
Non metals are soft.
Non metals are not malleable that is they can be broken into thin sheets.
Non metals are not ductile they can not be broken into thin wires.
Non metals are brittle in nature that is they can be broken down easily.
Non metals are not lustrous.
Therefore the correct option is option D.
To learn more about non metals, here:
https://brainly.com/question/28650063
#SPJ2
What kind of boundary is this boundary is the site of recurring earthquake activity and faulting.
Answer:
Transform boundary
Explanation:
The boundary that is a site of recurring earthquake and faulting activities is the transform boundary.
At a transform boundary, there is a significantly high prevalence of earthquakes and faulting.
In this margin, plates slides past one another laterally along a strike - slip direction. This brings about significant shearing and crushing of rocks. It leads to series of earthquakes and faults One notable example is the San Andreas fault(C)
C21H44 can be cracked to produce ethene.
Cz1H44 — 3C2H4 + C15H32
Relative formula mass (M) of C21H44 = 296
Calculate the mass of C21H44 needed to produce 50.4 kg of ethene.
Answer:
177.3kg C₂₁H₄₄
Explanation:
Based on the chemical reaction:
C₂₁H₄₄ → 3C₂H₄ + C₁₅H₃₂
Where 1 mole of C₂₁H₄₄ produce 3 moles of ethene, C₂H₄.
To solve this question we need to determine the moles of ethene in 50.4kg. 1/3 these moles are the moles of C₂₁H₄₄ that must be added:
Moles Ethene -Molar mass: 28.05g/mol-
50.4kg = 50400g * (1mol / 28.05g) = 1796.8 moles of ethene
Moles C₂₁H₄₄:
1796.8 moles of ethene * (1 mol C₂₁H₄₄ / 3 mol C₂H₄) = 589.93 moles C₂₁H₄₄
Mass C₂₁H₄₄:
589.93 moles C₂₁H₄₄ * (296g / mol) = 177283g =
177.3kg C₂₁H₄₄How does a thermometer measure temperature?
Differentiate between acids and bases on the basis of their pH values. Give an example of each type. keep it simple
Answer:
differences
Any compound with a pH value between zero to seven is considered acidic, whereas a pH value between seven to fourteen is a base. An acid is called a proton donor, while a base is called a proton acceptor (Kolb, 1978).
examples are:
baking soda is basic (pH = 9.0).
Orange juice is mildly acidic (pH = approximately 3.5)
The environment in your stomach is highly acidic (pH = 1 to 2).
Explanation:
hope that helps.... thanks
PLEASE HELPPPPP 12 POINTS
Answer: It most likely represents a canyon.
Which group/family contains elements with the smallest radius within the same period?
Answer:
Halogens
Explanation:
From the given choices, the halogens will have the smallest radius within the same period.
The size of an atom is estimated by the atomic radius. This is taken as half of the inter-nuclear distance between two covalently bonded atoms of non-metallic elements or half of the distance between two nuclei in the solid state.
Across a period in the periodic table, atomic radii decrease progressively from left to right. Down a group from top to bottom, atomic radii increase progressively due to the addition of successive shells.Since halogen is the right most group from the choices given, it will have the smallest radius.
What is the Molar Mass of BaCl2?
When KOH dissolved in ethanol, what is the intermolecular
attraction between OH ions and C2H5OH molecules?
a. Dipole-dipole
b. ionic attraction
c. London dispersion forces
d. lon-dipole
e. Covalent bonds
Answer: d. Ion-dipole
Explanation:
PLS HELP!!!!! 30 POINTS!!!!
Groups of students weighed three different samples of magnesium sulfate. The samples actually weigh 5.25 grams each. Determine whether each group’s data set is accurate, precise, both, or neither.
Drag the tiles to the correct boxes to complete the pairs.
Answer:
1. accurate but not precise
2. precise but not accurate
3. accurate and precise
4. neither
Explanation:
hope this helps :)
The accuracy is always followed by precision, but a high degree of precision does not imply accuracy. All the accurate results will be definitely precise.
What is accuracy and precision?The accuracy of a determination is defined as the concordance between the result and the true value or most probable value. The precision of a determination is known as the concordance of a series of measurements of the same quantity.
The accuracy expresses the correctness of a measurement while precision of a set of results expresses the reproducibility of a measurement.
Accuracy is related to how close the observed result is to the true value while precision is related to how close the measurements are to each other.
The given measurements are denoted as:
1. Accurate but not precise
2. Precise but not accurate
3. Accurate and precise
4. Neither
Thus accurate results will be precise but precise results may not be accurate.
To know more about accuracy, visit;
https://brainly.com/question/14244630
#SPJ2