Answer:
Sphere is a geometrical object in dimensional space that surface of a circle and ball.
Explanation:
Sphere is that the circular objects in the two dimensional space (1) circle
(2) disk. Two dimensional space is a set of points and the distance of that point,The two points of Sphere that length and center.
Sphere can constructed as the named of surface form circle about any diameter. circle is the special type of the revolution replacing the circle,
sphere is the distance r is the radius of the ball and circle is the center of mathematical ball,as the center and the radius of the sphere is to respectively.
The ball and sphere has not be maintained mathematical references as a solid references. A sphere of any radius is centered at the number of zero.
Explain length and time dilation and give an example of when each is observed.
Answer:
Length contraction
A moving object traveling at a velocity approaching the speed of light will appear to be shorter or to have undergone contraction.
The proportion by which the object is observed to have contracted is given by Lorentz transformation as follows;
[tex]L = L_{0}\cdot \sqrt{1 -\dfrac{v^{2}}{c^{2}}}= \dfrac{L_{0}}{\gamma }[/tex]
Time dilation
As the relative speed of motion of an object approaches the speed of light, the clock in the frame in motion will be observed to be moving slowly or dilated in a proportion given by Lorentz transformation as follows;
[tex]T = \dfrac{T_{0}}{\sqrt{1 -\dfrac{v^{2}}{c^{2}}}}[/tex]
Explanation:
Example of length contraction example
Two square boxes of side length L which are travelling at a velocity of 0.9 × c, are going to arranged in a single box of side side length L according to length contraction Lorentz transformation, to stationary observer we have
[tex]2 \times L\cdot \sqrt{1 -\dfrac{(0.9 \cdot c)^{2}}{c^{2}}}= 0.8 \cdot L[/tex]
To the stationary observer, the 2 boxes of length L will fit side by side in the single box of length L, while to those on the space ship carrying the boxes, the size of the single box is [tex]L\cdot \sqrt{1 -\dfrac{(0.9 \cdot c)^{2}}{c^{2}}}= 0.4 \cdot L[/tex], which will not contain half of one box
Example of of time dilation example
Twin A of two twins, twin A and B went on a space journey at the speed of 0.87·c for 5 years, the number of years past for twin B when they meet again will be [tex]T = \dfrac{5}{\sqrt{1 -\dfrac{(0.87\cdot c)^{2}}{c^{2}}}} = 10.14 \ years[/tex]
A 1,383 kg purple car is driving southbound on a road and collides with a 1,827 kg orange car, that was traveling 31.87 m/s eastbound. The two cars collide and stick, sliding 14.54 meters before coming to rest. What was the initial velocity of the two-car system just after the collision? Take the coefficient of friction to be 0.463, and the acceleration due to gravity to be 9.8 m/s2. Answer to two decimal places.
Answer:
Explanation:
We shall apply work energy theorem to calculate the initial velocity just after the collision .
Their kinetic energy will be equal to work done by friction .
force of friction = μ mg , where μ is coefficient of friction , m is total mass and g is acceleration due to gravity
force = .463 x 3210 x 9.8
= 14565.05 N
work done = force x displacement
= 14565.05 x 14.54 = 211775.88 J
now applying work energy theorem
1/2 m v² = 211775.88 , m is composite mass , v is velocity just after the collision
.5 x 3210 x v² = 211775.88
v² = 131.94
v 11.48 m /s
The magnetic field perpendicular to a single 13.2-cm diameter circular loop of copper wire decreases uniformly from 0.670 T to zero. If the wire is 2.25 mm in diameter, how much charge moves past a point in the coil during this operation? (rhoCu = 1.68 x 10-8 Ω.m)
Answer:
5.23 C
Explanation:
The current in the wire is given by I = ε/R where ε = induced emf in the wire and R = resistance of wire.
Now, ε = -ΔΦ/Δt where ΔΦ = change in magnetic flux = AΔB and A = area of loop and ΔB = change in magnetic field intensity = B₂ - B₁
B₁ = 0.670 T and B₂ = 0 T
ΔB = B₂ - B₁ = 0 - 0.670 T = - 0.670 T
A = πD²/4 where D = diameter of circular loop = 13.2 cm = 0.132 m
A = π(0.132 m)²/4 = 0.01368 m² = `1.368 × 10⁻² m²
ε = -ΔΦ/Δt = -AΔB/Δt = -1.368 × 10⁻² m² × (-0.670 T)/Δt= 0.9166 × 10⁻² Tm²/Δt
Now, the resistance R of the circular wire R = ρl/A' where ρ = resistivity of copper wire = 1.68 x 10⁻⁸ Ω.m, l = length of wire = πD and A' = cross-sectional area of wire = πd²/4 where d = diameter of wire = 2.25 mm = 2.25 × 10⁻³ m
R = ρl/A' = 1.68 x 10⁻⁸ Ω.m × π × 0.132 m÷π(2.25 × 10⁻³ m)²/4 = 0.88704/5.0625 = 0.1752 × 10⁻² Ω = 1.752 × 10⁻³ Ω
So, I = ε/R = 0.9166 × 10⁻² Tm²/Δt1.752 × 10⁻³ Ω
IΔt = 0.9166 × 10⁻² Tm²/1.752 × 10⁻³ Ω = 0.5232 × 10 C
Since ΔQ = It = 5.232 C ≅ 5.23 C
So the charge is 5.23 C
The induced emf through wire depends on the current flow (indirectly with charge flow as well).
The value of charge moving past a point in the coil during its operations is 5.23 C.
What is the magnetic field?The region in a space where a particle experiences some magnetic force, is known as the magnetic field.
Given data -
The diameter of the circular loop is, d = 13.2 cm = 0.132 m.
The change in magnetic field strength is, ΔB = 0.670 T.
The new diameter of the wire is, d' = 2.25 mm = 2.25 × 10³ m.
The resistivity of the wire is, [tex]\rho = 1.68 \times 10^{-8} \;\rm \Omega.m[/tex].
The current in the wire is given by the following expression,
I = ε/R
Here,
ε is the induced emf in the wire.
R is the resistance of the wire.
And the expression for the induced emf of the wire is given as,
ε = -ΔΦ/Δt
Here,
ΔΦ is the change in magnetic flux. And its expression is,
ε = A × ΔB
Here,
A is the area of the loop. And its value is, A = πd²/4.
Solving as,
A = π(0.132 m)²/4
A = 0.01368 m²
A = `1.368 × 10⁻² m²
Now, calculating the induced emf as,
ε = ΔΦ/Δt
ε = A × ΔB/Δt
ε = 1.368 × 10⁻² m² × (0.670 T)/Δt
ε = 0.9166 × 10⁻² Tm²/Δt
Now, the resistance R of the circular wire is,
R = ρ × L/A'
Here,
L is the length of the wire and its value is. L = πd .
And A' is the new cross-sectional area of wire,
A' = πd'²/4
So, the resistance is,
R = ρ × L/A'
R = 1.68 x 10⁻⁸ ×( π × 0.132 m) ÷ π(2.25 × 10⁻³ m)²/4 =
R = 0.88704/5.0625
R = 0.1752 × 10⁻² Ω
R = 1.752 × 10⁻³ Ω
Now, the current flow (I) in the wire is given as,
I = ε/R
I = 0.9166 × 10⁻² Tm²/Δt1.752 × 10⁻³ Ω
And obtaining the value of charge from the expression of current as,
Q = IΔt
Q = 0.9166 × 10⁻² Tm²/1.752 × 10⁻³ Ω
Q = 0.5232 × 10 C
Q = 5.23 C
Thus, we can conclude that the value of charge moving past a point in the coil during its operations is 5.23 C.
Learn more about the resistance of a wire here:
https://brainly.com/question/15067823
What is the angle of deviation in a plane mirror at normal incidence?
Answer:
The deviation of a mirror is equal to twice the angle of incidence.The total angle between the straight-line path and the reflected ray is twice the angle of incidence. This is called the deviation of the light and measures the angle at which the light has strayed from its initial straight-line path.
HOPE IT HELPS :)
PLEASE MARK IT THE BRAINLIEST!
4.
An "extreme" pogo stick utilizes a spring whose uncompressed length is 46 cm and whose force constant is 1.4 x 104 N/m. A 60-kg person is jumping on the pogo stick,
compressing the spring to a length of only 5.0 cm at the bottom of their jump. Which is the upward acceleration of the person at the moment the spring reaches its greatest
compression at the bottom of their jump?
6 m 2
Answer:
a = 85.9 m / s²
Explanation:
For this exercise we can use Newton's second law in the most compressed part
F - W = m a
force is the spring elastic force
F = - k Δx
k Δx - m g = m a
a = k/m Δx - g
Δx = x₀ -[tex]x_{f}[/tex]
ΔX = 46 - 5 = 41cm (1m / 100cm) = 0.41 m
let's calculate
a = 1.4 10⁴/60 0.41 - 9.8
a = 85.9 m / s²
What is electromagnet and list the types of electromagnet.
Answer:
radio waves, micro wave, x-rays
Explanation:
Explanation:
A MAGNET IN WHICH MAGNETIC FIELD IS PRODUCED BY ELECTRIC CURRENT IS CALLED ELECTROMAGNET.
THE ELECTROMAGNETS ARE HAVE 3 TYPES. THERE ARE:
◇ ROBUST ONES
◇ THE SUPERCONDUCTORS
◇ HYBRIDS.
EXAMPLES OF ELECTROMAGNETS: RADIO WAVES, MICROWAVE, X-RAYS. HOPE IT HELP...❤❤An electron of kinetic energy 1.39 keV circles in a plane perpendicular to a uniform magnetic field. The orbit radius is 20.8 cm. Find (a) the electron's speed, (b) the magnetic field magnitude, (c) the circling frequency, and (d) the period of the motion.
Answer:
a) v = 2.21 10⁷ m / s, b) B = 6.04 10⁻⁴ T , c) f = 1.69 10⁷ Hz , d) T = 5.9 10⁻⁸ s
Explanation:
a) For this exercise, let's start by using the concept of kinetic energy
K = ½ m v²
v = √ 2K / m
Let's reduce the magnitudes to SI units
E = K = 1.39 kev (1000 eV / 1 keV) (1.6 10⁻¹⁹ J / 1 eV) = 2,224 10⁻¹⁶ J
r = 20.8 cm (1 m / 100 cm) = 0.208 m
let's calculate
v = √ (2 2,224 10⁻¹⁶ / 9.1 10⁻³¹)
v = √ (4.8879 10¹⁴)
v = 2.21 10⁷ m / s
b) let's use Newton's second law where the force is magnetic
F = m a
where the acceleration is centripetal
a = v² / r
the magnetic force is
Fm = q v x B = q v B sin θ
since the circle is perpendicular to the magnetic field, the angle is 90º and the sine is equal to one, let's substitute
qv B = m v² / r
B = m v / rq
let's calculate
B = 9.1 10⁻³¹ 2.21 10⁷ / (0.208 1.6 10⁻¹⁹)
B = 6.04 10⁻⁴ T
c) Linear and angular variables are related
v = w r
w = v / r
w = 2.21 10⁷ / 0.208
w = 1.0625 10⁸ ras / s
angular velocity and frequency are related
w = 2π f
f = w / 2π
f = 1.0625 10⁸ / (2π)
f = 1.69 10⁷ Hz
d) the frequency is the inverse of the period
f = 1 / T
T = 1 / 1.69 10⁷
T = 5.9 10⁻⁸ s
Letícia leaves the grocery store and walks 150.0 m to the parking lot. Then, she turns 90° to the right and walks an additional 70.0 m to her car. What is the magnitude of the displacement of her car from the grocery store exit?
Answer:
165.529454
Explanation:
According to the Pythagorean Theorem for calculating the lengths of a right angle triangle's sides, a^2 + b+2 = c^2, where c is the longest side (and the side opposing the right angle). So in your case it would be 150*150 + 70*70 = 27400. And √ 27400 is your answer.
20 m
A projectile is fired from the origin (at y = 0 m) as shown in the diagram. The initial velocity components are Vox = 310 m's and Vov = 26 m s The
projectile reaches maximum height at point P. then it falls and strikes the ground at point Q which is 20 m below the launch point. What is the horizontal
distance that the projectile travels (labeled x in the diagram)?
O 1.3 km
700 m
O 32 km
O 870 m
O 1.9 km
Answer:
1.9 km
Explanation:
The equation for vertical motion is ...
h(t) = -4.9t^2 +26t +20
This will have a zero near t = 5.988 seconds.*
The horizontal distance traveled in that time is ...
(310 m/s)(5.988 s) ≈ 1856 m ≈ 1.9 km
_____
* The root of a quadratic can be found numerous ways. We choose the quick and easy: let a graphing calculator show it to you.
You are playing a violin, where the fundamental frequency of one of the strings is 440 Hz, as you are standing in front of the opening of a long tube that is closed at the other end. As you play, you notice that the first time you hear an echo from the tube is when the sound from the 440 Hz string is in its fourth harmonic. Assuming you are playing this string on earth, what must be the length of the tube? What is the next higher harmonic number for the same string on the violin when you hear the next higher harmonic echo from the tube?
Answer:
a) L = 440 cm
Explanation:
In the open tube on one side and cowbell on the other, we have a maximum in the open part and a node in the closed part, therefore the resonance frequencies are
λ₁ = 4L fundamental
λ₃ = 4L / 3 third harmonic
λ₅ = 4L / 5 five harmonic
The violin string is a fixed cure in its two extracts, so both are nodes, their length from resonance wave are
λ₁ = 2L fundamental
λ₂ = 2L / 2 second harmonic
λ₃ = 2L / 3 third harmonic
λ₄= 2L / 4 fourth harmonic
They indicate that resonance occurs in the fourth harmonic, let's look for the frequency
v =λ f
for the fundamental
v = λ₀ f₀
V = 2L f₀
for the fourth harmonica
v = λ₄ f ’
v = L / 2 f'
2L f₀ = L / 2 f ’
f ’= 4 f₀
f ’= 4 440
f ’= 1760 Hz
for this frequency it has the resonance with the tube
f ’= 4L
L = f ’/ 4
L = 1760/4
L = 440 cm
b) let's find the frequency of the next harmonic in the tube
λ₃ = 4L / 3
λ₃ = 4 400/3
λ₃ = 586.6 cm
v = λf
f = v / λlam₃
f₃3 = 340 / 586.6
f3 = 0.579
as the minimum frequency on the violin is 440 Beam there is no way to reach this value, therefore there are no higher resonances
If two resistors each of 40 ohms are connected in series what will be its equivalent resistance. If the same resistors are connected in parallel combination what will be the equivalent resistance? ANSWER CORRECTLY, IWILL MARK IT BRAINLIEST.
Explanation:
In case the resistors are in series
R =R1 + R2
R = 40 ohm + 40 ohm
R = 80 ohm
In case the resistors are in parallel
R = 1/R1 + 1/R2
R = 1/40 + 1/40
R = 2/40 ohm
R = 1/20 ohm or R = 0.05 ohm
dont forget to mark brainliest
Answer:
dtwtwerEtbWt
Explanation:
bwtrbtWbTW4TBW4tbW4T4t
sliding friction is _ than the static friction.
Answer:
less
Explanation:
Sliding friction is always less than static friction. This is because in sliding friction, the bodies slide with each other and thus the effect of friction is not more. However, it does not happen in the case of static friction.
Why does time seem to flow only in one direction?
Answer:
Time seem to flow only in one direction because if it started to go in backward direction that would break the second law of thermodynamics. We do not find time to be moving in any direction because time is not an object that can move nor is it a force that can move any object.
a physical quantity Z is given by z=ad/g .calculte the relatibe error in z
Answer:
e_{r} = Δa /a + Δd /Δ d + Δg / g
Explanation:
The error or uncertainty of a quantity is given by several factors, the most direct error is the absolute one that is given by the appreciation of the instruments, when some quantities obtained by a mathematical formula we must know how each error is programmed in the total error, we can see this with the relative error
the calculated quantity is Z
its relative error is
[tex]e_{r}[/tex] = ΔZ/Z = 1/Z (dZ /da Δa + dZ /dd Δd + dZ /dg Δg)
e_{r} = 1 / Z (d /g Δa + a /g Δd + ad !1/g²! Δg)
e_{r} = Δa /a + Δd /Δ d + Δg / g
notice that we take the worst case.
The measured quantities have absolute errors Da, Dd, Dg
Given a volume of 1000. сm of an ideal gas at 300. K, what volume would it occupy at a temperature of 600. K?
Answer:
2000 cm³
Explanation:
Assuming the pressure is constant:
V / T = V / T
1000 cm³ / 300 K = V / 600 K
V = 2000 cm³
Which of the following best represents a double replacement reaction?
A. AB → A + B
B. A + B → AB
C. A + BC → AC + B
D. AC + BD → AD + BC
Answer:
D. AC+BD -> AD +BC
Explanation:
I got it right
A double displacement reaction is also called the double replacement reaction or double decomposition reaction. Here AC + BD → AD + BC is a double displacement reaction. The correct option is D.
What is double displacement reaction?A double displacement reaction is defined as a chemical reaction in which the positive and negative ions of two ionic compounds exchange their places to form two new compounds. The general form of a double displacement reaction is given as:
AC + BD → AD + BC
Here 'A' and 'B' are positively charged cations, whereas 'C' and 'D' are negatively charged anions. The double displacement reactions generally occur between the substances in an aqueous solution. In order for a reaction to occur, one of the products is usually a solid precipitate, a gas or a molecular compound like water.
Thus the correct option is D.
To know more about double replacement reaction, visit;
https://brainly.com/question/13870042
#SPJ3
Ionizing radiation is radiation of sufficient energy to produce charged atoms. All of these describe ionizing radiation. is radiation of sufficient energy to produce ions. is radiation of sufficient energy to remove electrons from atoms.
Answer:
Is radiation of sufficient energy to produce ions.
Is radiation of sufficient energy to remove electrons from atoms.
Explanation:
Ionization radiation is a radiation that travels at a high speed, and possesses sufficient speed to knock electrons off of an atom or a molecule, ionizing the atom. Ionization radiation can be made of travelling subatomic particles, or an electromagnetic wave with high energy, usually the types found at the end of the electromagnetic spectrum. Some subatomic particles that produce ionization are alpha particle, beta particles, and neutron. The electromagnetic waves with ionization abilities includes Gamma rays. -rays, and high energy ultraviolet rays.
A projectile is fired from a height of 80 M above sea level, horizontally with a speed of 360 M / S, calculate: The time it takes for the projectile to reach the water. The Horizontal scope. The height that remains to descend after 2 seconds of being launched.
Answer:
(a) The projectile takes approximately 4.420 seconds to reach the water, (b) The horizontal scope of the projectile is 1591.2 meters, (c) The remaining height to descend after 2 seconds of being launched is 63.624 meters.
Explanation:
The projectile experiments a parabolic motion, where horizontal speed remains constant and accelerates vertically due to the gravity effect. Let consider that drag can be neglected, so that kinematic equation are described below:
[tex]x = x_{o}+v_{o,x} \cdot t[/tex]
[tex]y = y_{o} + v_{o,y}\cdot t +\frac{1}{2}\cdot g \cdot t^{2}[/tex]
Where:
[tex]x_{o}[/tex], [tex]y_{o}[/tex] - Initial horizontal and vertical position of the projectile, measured in meters.
[tex]v_{o,x}[/tex], [tex]v_{o,y}[/tex] - Initial horizontal and vertical speed of the projectile, measured in meters per second.
[tex]t[/tex] - Time, measured in seconds.
[tex]g[/tex] - Gravitational acceleration, measured in meters per square second.
[tex]x[/tex], [tex]y[/tex] - Current horizontal and vertical position of the projectile, measured in meters.
Given that [tex]x_{o} = 0\,m[/tex], [tex]y_{o} = 80\,m[/tex], [tex]v_{o,x} = 360\,\frac{m}{s}[/tex], [tex]v_{o,y} = 0\,\frac{m}{s}[/tex] and [tex]g = -9.807\,\frac{m}{s^{2}}[/tex], the kinematic equations are, respectively:
[tex]x = 360\cdot t[/tex]
[tex]y = 80-4.094\cdot t^{2}[/tex]
(a) If [tex]y = 0\,m[/tex], the time taken for the projectile to reach the water is:
[tex]80 - 4.094\cdot t^{2} = 0[/tex]
[tex]t = \sqrt{\frac{80}{4.094} }\,s[/tex]
[tex]t \approx 4.420\,s[/tex]
The projectile takes approximately 4.420 seconds to reach the water.
(b) The horizontal scope is the horizontal distance done by the projectile before reaching the water. If [tex]t \approx 4.420\,s[/tex], the horizontal scope of the projectile is:
[tex]x = 360\cdot (4.420)[/tex]
[tex]x = 1591.2\,m[/tex]
The horizontal scope of the projectile is 1591.2 meters.
(c) If [tex]t = 2\,s[/tex], the height that remains to descend is:
[tex]y = 80-4.094\cdot (2)^{2}[/tex]
[tex]y = 63.624\,m[/tex]
The remaining height to descend after 2 seconds of being launched is 63.624 meters.
define motion also justify that rest and motion are related terms
Answer;
Motion: A body is said to be in motion if it changes its position with respect to its surroundings.
Explanation:
Rest and motion are the relative terms because they depend on the observer's frame of reference. So if two different observers are not at rest with respect to each other, then they too get different results when they observe the motion or rest of a body .
one example for each. Rest: If a body does not change its position with respect to its surroundings, the body is said to be at rest. ... Motion: A body is said to be in motion if it changes its position with respect to its surroundings.
An alternating source drives a series RLC circuit with an emf amplitude of 6.34 V, at a phase angle of +32.6°. When the potential difference across the capacitor reaches its maximum positive value of +5.08 V, what is the potential difference across the inductor (sign included)?
Answer:
V=-8.35v
Explanation:
Pls see attached file
A machine takes 0.5 seconds to move a brick 1 meter and put 100 Joules of energy into it. (hint: Power is the amount of energy transferred or converted per unit time. Or we say power is work done per unit time. LaTeX: P\:=\:\frac{W}{t}P = W t) This machine would expend more power in this action if it:
Answer:
200 Watts.
Explanation:
Power is defines as the amount of work expended per unit time. Mathematically, it is expressed as Power = Workdone/Time
Given parameters
Energy used up 100Joules
Distance moved by brick = 1 meters
Time taken by the machine = 0.5 secs
Power can also be written as Energy/Time
Required
We need to calculate the amount of power used up.
Power = 100J/0.5s
Power = 100/(1/2)
Power = 100 * 2/1
Power = 200Watts.
This shows that the machine would expend 200Watts of power
Pls someone I need it urgently and explain Solving and explanation so I can understand Thank you
Answer:
f = 6.37 Hz, T = 0.157 s
Explanation:
The expression you have is
y = 5 sin (3x - 40t)
this is the equation of a traveling wave, the general form of the expression is
y = A sin (kx - wt)
where A is the amplitude of the motion, k the wave vector and w the angular velocity
Angle velocity and frequency are related
w = 2π f
f = w / 2π
from the equation w = 40 rad / s
f = 40 / 2π
f = 6.37 Hz
frequency and period are related
f = 1 / T
T = 1 / f
T = 1 / 6.37
T = 0.157 s
A body moves in a straight line. At time, it's acceleration is given by a = 12t + 1. When t =0, the velocity of the body v is 2 metres per second and its displacement from the origin s is 0.
1. Express v and s in terms of t.
2. Determine velocity and displacement of the body after 3 seconds.
Answer:
v = 6t² + t + 2, s = 2t³ + ½ t² + 2t
59 m/s, 64.5 m
Explanation:
a = 12t + 1
v = ∫ a dt
v = 6t² + t + C
At t = 0, v = 2.
2 = 6(0)² + (0) + C
2 = C
Therefore, v = 6t² + t + 2.
s = ∫ v dt
s = 2t³ + ½ t² + 2t + C
At t = 0, s = 0.
0 = 2(0)³ + ½ (0)² + 2(0) + C
0 = C
Therefore, s = 2t³ + ½ t² + 2t.
At t = 3:
v = 6(3)² + (3) + 2 = 59
s = 2(3)³ + ½ (3)² + 2(3) = 64.5
Which statement best describes the difference between how lenses and
mirrors interact with light?
A. Lenses bring light to a point; mirrors do not.
B. Lenses form images by reflecting light; mirrors do not.
C. Lenses spread light apart; mirrors do not.
D. Lenses form images by refracting light; mirrors do not.
Answer:D
Explanation:
Apex
Increase in Space Suit Pressure 0.0/3.0 points (graded) If the pressure in a space suit increases, how will each of the following be affected? Flexilibity will: Increase Decrease Stay the same unanswered The required pre-breathe time will: Increase Decrease Stay the same unanswered The mass of the suit will: Increase Decrease Stay the same
Answer:
Flexibility Increases
Pre-breathe time decreases
Mass of suit decreases.
Explanation:
Spacesuits are designed for space shuttles when a person goes to explore the galaxy. The spacesuits shuttle era are pressurized at 4.3 pounds per inch. The gas in the suit is 100% of oxygen and there is more oxygen to breathe when the altitude of 10,000 is reached. This will decrease the breathing time and mass of suit.
A charged particle with charge of 2 (uC) and mass 10-20 (kg) is traveling with velocity of 108 (m/s) in space. The charge reaches to a region in space with magnetic field of 0.05 (T) and experience a force of 8 (N) exerted by the magnetic field.
A- What is the angle between velocity of particle and magnetic field direction?
B- What is acceleration of charged particle while experiencing the force?
Answer:
Explanation:
A ) Let the angle be θ between magnetic field and velocity of charged particle
Force created on charged particle F
= Bqv sinθ, B is magnetic field , q is charge , v is velocity of charged particle
F = .05 x 2 x 10⁻⁶ x 10⁸ x sinθ
8 = 10 sinθ
sinθ = .8
θ = 53°.
B )
acceleration = force / mass
= 8 / 10⁻²⁰
= 8 x 10²⁰ m / s²
Which refers to the rate of change in velocity?
O speed
O acceleration
O direction
O magnitude
Answer:
acceleration is the answer
Answer:
Acceleration
Explanation:
Fill in the appropriate word or term for the following statements.
a. -150 mV
b. Voltage-gated
c. resting
d. super- depolarization
e. +30 mV
f. +15 mV action
g. action
h. close
i. open
j. hyperpolarization
1. Voltage-gated K -50 mV channels remain open, causing a ___________of the membrane. The membrane is now in its relative refractory period.
2. The membrane is at the____________ potentials occasionally generating graded potential. open
3. Voltage-gated K channels____________and the resting potential of the membrane is restored.
4. At about ____________voltage-gated Na* channels are inactivated, and voltage-gated K channels open. Kt exits the cell and repolarizes the membrane. At this time, the membrane is in its absolute refractory period.
close
5. An action potential is triggered when the threshold potential of about____________ is reached. Voltage-gated Na+ channels open. Na* diffuses into the cell and depolarizes the membrane.
Answer:
1 j
2 C
3 H
4E
5A
Explanation:
what is the formula for velovity?
Answer:
if it's velocity u talking of.....
Explanation:
then it's displacement/ time
Fill in the blanks in the following statements:
1. A parsec is defined as the distance from the Sun which would result in a parallax of_____ arcsecond as seen from Earth when observed 6 months apart.
2. One parsecs is about_____light years.
3. The more distant a star, the_____its parallax.
4. The statement "we can measure stellar parallax for most stars in our galaxy" is_____.
5. The closest stars have parallaxes smaller than______arcsecond.
6. The first successful measurements of stellar parallax were made by______in year______for the star named.
7. Star Fred has parallax four times greater than star Bob. Star Fred is______times______then star Bob.
Answer:
Explanation:
1. A parsec is defined as the distance from the Sun which would result in a parallax of_TWO____ arcsecond as seen from Earth when observed 6 months apart.
2. One parsecs is about_3.3____light years
3. The more distant a star, the_LESS ____its parallax.
4. The statement "we can measure stellar parallax for most stars in our galaxy" is__TRUE .___.
5. The closest stars have parallaxes smaller than_.002 _____arcsecond.
6. The first successful measurements of stellar parallax were made by_Friedrich Bessel_____in year_1838_____for the star named.
7. Star Fred has parallax four times greater than star Bob. Star Fred is__4____times_nearer_____than star Bob.