The Goliath six flags Magic Mountain roller coaster ride starts at 71.6 m (235 feet) above the ground. Assuming the coaster starts from rest and ignoring any friction, what is the speed of the coaster when it reaches the ground level

Answers

Answer 1

Answer:

The  velocity is [tex]v = 37 .46 \ m/s[/tex]

Explanation:

From the question we are told that

    The start distance above the ground is  [tex]h = 71.6 \ m[/tex]

Generally according to the  law of energy conservation we have that

     [tex]PE_{top} = KE_{bottom }[/tex]

Where [tex]PE_{top}[/tex] is potential energy at the top which is mathematically represented as

      [tex]PE_{top} = m * g * h[/tex]

And  [tex]KE_{bottom }[/tex] is the kinetic energy at the bottom which is mathematically represented as

     [tex]KE_{bottom } = \frac{1}{2} * m * v^2[/tex]

Therefore  

       [tex]m * g * h = \frac{1}{2} * m * v^ 2[/tex]

=>    [tex]v = \sqrt{2 * g * h }[/tex]

substituting value

     [tex]v = \sqrt{2 * 9.8 * 71.6 }[/tex]

     [tex]v = 37 .46 \ m/s[/tex]


Related Questions

dandre expands 120w of power in moving a couch 15 meters in 5 seconds how much force does he exert ?

Answers

Answer:

The answer is 40 N for APX

Explanation:

Two charges, +9 µC and +16 µC, are fixed 1 m apart, with the second one to the right. Find the magnitude and direction of the net force (in N) on a −7 nC charge when placed at the following locations.
(a) halfway between the two
(b) half a meter to the left of the +9 µC charge
(c) half a meter above the +16 µC charge in a direction perpendicular to the line joining the two fixed charges (Assume this line is the x-axis with the +x-direction toward the right. Indicate the direction of the force in degrees counterclockwise from the +x-axis.)

Answers

Answer:

A) 1.76U×10⁻³N

B) 2.716×10⁻³N

C) 264.5⁰

Explanation:

See detailed workings for (a), (b), (c) attached.

To work on your car at night, you use an extension cord to connect your work light to a power outlet near the door. How would the illumination provided by the light be affected by the length of the extension cord

Answers

Answer:

The longer the cord, the lower the illumination

Explanation:

The illumination provided by the light bulb will be reduced as the length of the extension cord increases. This is because the resistance provided by the wire increases with its length.

Long wires have more electrical resistance than shorter ones.

Let us consider this formula:

Resistance =[tex]\frac{\rho L}{A}[/tex]

From this formula, we can see that as the length increases, the resistance to current flow offered by the wire increases also provided the resistivity and cross-sectional area of the wire remain constant. As a result of this, the illumination will drop.

A tennis player swings her 1000 g racket with a speed of 12 m/s. She hits a 60 g tennis ball that was approaching her at a speed of 15 m/s. The ball rebounds at 40 m/s.
A) How fast is her racket moving immediately after the impact? You can ignore the interaction of the racket with her hand for the brief duration of the collision.
_________m/s
B) If the tennis ball and racket are in contact for 7.00, what is the average force that the racket exerts on the ball?
_________N

Answers

The velocity and force are required.

The speed of the racket is 8.7 m/s

The required force is 471.43 N.

[tex]m_1[/tex] = Mass of racket = 1000 g

[tex]m_2[/tex] = Mass of ball = 60 g

[tex]u_1[/tex] = Initial velocity of racket = 12 m/s

[tex]u_2[/tex] = Initial velocity of ball = -15 m/s

[tex]v_1[/tex] = Final velocity of racket

[tex]v_2[/tex] = Final velocity of ball = 40 m/s

[tex]\Delta t[/tex] = Time = 7 ms

The equation of the momentum will be

[tex]m_1u_1+m_2u_2=m_1v_1+m_2v_2\\\Rightarrow v_1=\dfrac{m_1u_1+m_2u_2-m_2v_2}{m_1}\\\Rightarrow v_1=\dfrac{1\times 12+0.06\times (-15)-0.06\times 40}{1}\\\Rightarrow v_1=8.7\ \text{m/s}[/tex]

Force is given by

[tex]F=m_2\dfrac{v_2-u_2}{\Delta t}\\\Rightarrow F=0.06\times \dfrac{40-(-15)}{7\times 10^{-3}}\\\Rightarrow F=471.43\ \text{N}[/tex]

Learn more:

https://brainly.com/question/19689434?referrer=searchResults

The magnitude of the Poynting vector of a planar electromagnetic wave has an average value of 0.939 W/m2. The wave is incident upon a rectangular area, 1.5 m by 2.0 m, at right angles. How much total electromagnetic energy falls on the area during 1.0 minute

Answers

Answer:

The  total energy is  [tex]T = 169.02 \ J[/tex]

Explanation:

From the question we are told that

    The  Poynting vector (energy flux ) is  [tex]k = 0.939 \ W/m^2[/tex]

    The length of the rectangle is  [tex]l = 1.5 \ m[/tex]

    The  width of the rectangle is  [tex]w = 2.0 \ m[/tex]

    The time taken is [tex]t = 1 \ minute = 60 \ s[/tex]

The total electromagnetic energy falls on the area is mathematically represented as

      [tex]T = k * A * t[/tex]

Where A  is the area of the rectangle which is mathematically represented as

           [tex]A= l * w[/tex]

 substituting values

         [tex]A= 2 * 1.5[/tex]

        [tex]A= 3 \ m^2[/tex]

substituting values

        [tex]T = 0.939 * 3 * 60[/tex]

        [tex]T = 169.02 \ J[/tex]

In a system with only a single force acting upon a body, what is the relationship between the change in kinetic energy and the work done by the force?

Answers

Answer: W.D = 1/2mv^2

Explanation:

If an external force or a single force is acting on a body. Just like the first law of thermodynamics, the force acting on the body will cause work done on the system.

Work done = force × distance

And the work done on the body will cause the molecules of the body to experience motion and thereby producing kinetic energy.

The work done will be converted to kinetic energy.

W.D = 1/2mv^2

A parallel-plate capacitor in air has a plate separation of 1.31 cm and a plate area of 25.0 cm2. The plates are charged to a potential difference of 255 V and disconnected from the source. The capacitor is then immersed in distilled water. Assume the liquid is an insulator.
(a) Determine the charge on the plates before and after immersion.
before pC
after pC
(b) Determine the capacitance and potential difference after immersion.
Cf = F
ΔVf = V
(c) Determine the change in energy of the capacitor.
[ ] nJ

Answers

Answer:

a) before immersion

C = εA/d = (8.85e-12)(25e-4)/(1.31e-2) = 1.68e-12 F

q = CV = (1.68e-12)(255) = 4.28e-10 C

b) after immersion

q = 4.28e-10 C

Because the capacitor was disconnected before it was immersed, the charge remains the same.

c)*at 20° C

C = κεA/d = (80.4*)(8.85e-12)(25e-4)/(1.31e-2) = 5.62e-10 F

V = q/C = 4.28e-10 C/5.62e-10 C = 0.76 V

e)

U(i) = (1/2)CV^2 = (1/2)(1.68e-12)(255)^2 = 5.46e-8 J

U(f) = (1/2)(5.62e-10)(0.76)^2 = 1.62e-10 J

ΔU = 1.62e-10 J - 5.46e-8 J = -3.84e-8 J

gravity can be described as..?

A. an magnetic force found in nature

B.the force that moves electrical charges

C.the force that repels object with like chargers

D.the force of attraction between two objects

Answers

Answer:

D

Explanation:

Gravity is the force of attraction between two objects.

Each object creates a gravitational field in wich every other object is affected by it.

On a part-time job, you are asked to bring a cylindrical iron rod of density 7800 kg/m 3 kg/m3 , length 81.2 cmcm and diameter 2.60 cmcm from a storage room to a machinist. Calculate the weight of the rod, www. Assume the free-fall acceleration is ggg = 9.80 m/s2m/s2 .

Answers

Answer:

The weight of the rod is 32.87 N

Explanation:

Density of the rod = 7800 kg/m

length of the rod = 81.2 cm = 0.812 m

diameter of rod = 2.60 cm = 0.026 m

acceleration due to gravity = 9.80 m/s^2

The rod can be assumed to be a cylinder.

The volume of the rod can be calculated as that of a cylinder, and can be gotten as

V = [tex]\frac{\pi d^{2} l}{4}[/tex]

where d is the diameter of the rod

l is the length of the rod

V = [tex]\frac{3.142* 0.026^{2}* 0.812}{4}[/tex] = 4.3 x 10^-4 m^3

We know that the mass of a substance is the density times the volume i.e

mass m = ρV

where ρ is the density of the rod

V is the volume of the rod

m = 4.3 x 10^-4 x 7800 = 3.354 kg

The weight of a substance is the mass times the acceleration due to gravity

W = mg

where g is the acceleration due to gravity g = 9.80 m/s^2

The weight of the rod W = 3.354 x 9.80 = 32.87 N

A solid, homogeneous sphere with a mass of m0, a radius of r0 and a density of ρ0 is placed in a container of water. Initially the sphere floats and the water level is marked on the side of the container. What happens to the water level, when the original sphere is replaced with a new sphere which has different physical parameters? Notation: r means the water level rises in the container, f means falls, s means stays the same.


A)
The new sphere has a density of ρ = ρ0 and a mass of m < m0.

B)
The new sphere has a density of ρ = ρ0 and a radius of r > r0.

C)
The new sphere has a density of ρ < ρ0 and a mass of m = m0.

The options are r, f, and s. Rises, Falls, Stays the same.

Answers

Answer:

(a) f

(b) r

(c) s

Explanation:

There are two forces on the sphere: weight and buoyancy.

Sum of forces in the y direction:

∑F = ma

B − mg = 0

B = mg

Buoyancy is equal to the weight of the displaced fluid, or ρVg, where ρ is the density of the fluid and V is the displaced volume.

ρVg = mg

ρV = m

V = m/ρ

(a) The mass decreases, so the displaced volume decreases.

(b) The sphere's density is constant and its radius increases, which means its mass increases, so the displaced volume increases.

(c) The mass stays the same, so the displaced volume is the same.

Given that the mass of the Earth is 5.972 * 10^24 kg and the radius of the Earth is
6.371 * 10^6 m and the gravitational acceleration at the surface of the Earth is 9.81
m/s^2 what is the gravitational acceleration at the surface of an alien planet with
2.4 times the mass of the Earth and 1.9 times the radius of the Earth?
Although you do not necessarily need it the universal gravitational constant is G =
6.674 * 10^(-11) N*m^2/kg^2
9

Answers

Answer:

gₓ = 6.52 m/s²

Explanation:

The value of acceleration due to gravity on the surface of earth is given as:

g = GM/R²   -------------------- equation 1

where,

g = acceleration due to gravity on surface of earth

G = Universal Gravitational Constant

M = Mass of Earth

R = Radius of Earth

Now, for the alien planet:

gₓ = GMₓ/Rₓ²

where,

gₓ = acceleration due to gravity at the surface of alien planet

Mₓ = Mass of Alien Planet = 2.4 M

Rₓ = Radius of Alien Planet = 1.9 R

Therefore,

gₓ = G(2.4 M)/(1.9 R)²

gₓ = 0.66 GM/R²

using equation 1

gₓ = 0.66 g

gₓ = (0.66)(9.81 m/s²)

gₓ = 6.52 m/s²

Assume that a lightning bolt can be represented by a long straight line of current. If 15.0 C of charge passes by in a time of 1.5·10-3s, what is the magnitude of the magnetic field at a distance of 24.0 m from the bolt?

Answers

Answer:

The magnitude of the magnetic field is 8.333 x 10⁻⁷ T

Explanation:

Given;

charge on the lightening bolt, C = 15.0 C

time the charge passes by, t = 1.5 x 10⁻³ s

Current, I is calculated as;

I = q / t

I = 15 / 1.5 x 10⁻³

I = 10,000 A

Magnetic field at a distance from the bolt is calculated as;

[tex]B = \frac{\mu_o I}{2\pi r}[/tex]

where;

μ₀ is permeability of free space = 4π x 10⁻⁷

I is the current in the bolt

r is the distance of the magnetic field from the bolt

[tex]B = \frac{\mu_o I}{2\pi r} \\\\B = \frac{4\pi *10^{-7} 10000}{2\pi *24} \\\\B = 8.333 *10^{-5} \ T[/tex]

Therefore, the magnitude of the magnetic field is 8.333 x 10⁻⁷ T

When the magnet falls toward the copper block, the changing flux in the copper creates eddy currents that oppose the change in flux. The resulting braking force between the magnet and the copper block always opposes the motion of the magnet, slowing it as it falls. The rate of the fall produces a rate of flux change sufficient to produce a current that provides the braking force. If the copper is cooled with liquid nitrogen, the resistivity of the copper drops dramatically. How will this affect the speed at which the magnet falls toward the copper

Answers

Answer:

The speed at which the magnet falls through the copper block will be reduced dramatically.

Explanation:

Eddy's current are loops of electrical current induced within conductors by a changing magnetic field in the conductor. Eddy's current is proportional to the the magnetic field strength, the rate of change of flux, the area of the loop, and is inversely proportional to the resistivity of the material. Eddy currents flows perpendicularly to the magnetic field, and in closed loops within conductors.

Reducing the resistivity of the copper will increase the Eddy current on the copper, which will in turn increase the opposition to the action producing the flux change (the falling magnet through the copper block). The result is that the speed at which the magnet falls through the copper block will be reduced dramatically.

What is the wave length if the distance from the central bright region to the sixth dark fringe is 1.9 cm . Answer in units of nm.

Answers

Complete Question

The complete question is shown on the first uploaded image  

Answer:

The  wavelength is  [tex]\lambda = 622 nm[/tex]

Explanation:

  From the question we are told that

    The distance of the slit to the screen is  [tex]D = 5 \ m[/tex]

    The order of the fringe is m  =  6

     The distance between the slit is  [tex]d = 0.9 \ mm = 0.9 *10^{-3} \ m[/tex]

    The fringe distance is  [tex]Y = 1.9 \ cm = 0.019 \ m[/tex]

Generally the for a dark fringe the fringe distance is  mathematically represented as

        [tex]Y = \frac{[2m - 1 ] * \lambda * D }{2d}[/tex]

=>     [tex]\lambda = \frac{Y * 2 * d }{[2*m - 1] * D}[/tex]

substituting values

=>      [tex]\lambda = \frac{0.019 * 2 * 0.9*10^{-3} }{[2*6 - 1] * 5}[/tex]

=>     [tex]\lambda = 6.22 *10^{-7} \ m[/tex]

       [tex]\lambda = 622 nm[/tex]

The magnetic force per meter on a wire is measured to be only 45 %% of its maximum possible value. Calculate the angle between the wire and the magnetic field.

Answers

Answer:

27°

Explanation:

The force is proportional to the sine of the angle between the wire and the magnetic field. (See the ref.)

So theta = arcsin(0.45)

=27°

The angle between the wire and the magnetic field is 27°.

Calculation of the angle:

Since The magnetic force per meter on a wire is measured to be only 45 %

So here we know that The force should be proportional to the sine of the angle between the wire and the magnetic field

Therefore,

theta = arcsin(0.45)

=27°

Hence, The angle between the wire and the magnetic field is 27°.

Learn more about wire here: https://brainly.com/question/24733137

An astronaut out on a spacewalk to construct a new section of the International Space Station walks with a constant velocity of 2.30 m/s on a flat sheet of metal placed on a flat, frictionless, horizontal honeycomb surface linking the two parts of the station. The mass of the astronaut is 71.0 kg, and the mass of the sheet of metal is 230 kg. (Assume that the given velocity is relative to the flat sheet.)

Required:
a. What is the velocity of the metal sheet relative to the honeycomb surface?
b. What is the speed of the astronaut relative to the honeycomb surface?

Answers

Answer:

Explanation:

Let the velocity of astronaut be u and the velocity of flat sheet of metal plate be v . They will move in opposite direction ,  so their relative velocity

= u + v = 2.3 m /s ( given )

We shall apply conservation of momentum law for the movement of astronaut and metal plate

mu  = M v where m is mass of astronaut , M is mass of metal plate

71 u = 230 x v

71 ( 2.3 - v ) = 230 v

163.3 = 301 v

v = .54 m / s

u = 1.76 m / s

honeycomb will be at rest  because honeycomb surface  is frictionless . Plate will slip over it . Over plate astronaut is walking .

a ) velocity of metal sheet relative to honeycomb will be - 1.76 m /s

b ) velocity of astronaut relative to honeycomb will be + .54 m /s

Here + ve direction is assumed to be the direction of astronaut .  

Three point charges (some positive and some negative) are fixed to the corners of the same square in various ways, as the drawings show. Each charge, no matter what its algebraic sign, has the same magnitude. In which arrangement (if any) does the net electric field at the center of the square have the greatest magnitude?

Answers

Answer:

The magnitude of the net field located at the center of the square is the same in every of arrangement of the charges.

The length of your eye decreases slightly as you age, making the lens a bit closer to the retina. Suppose a man had his vision surgically corrected at age 30. At age 70, once his eyes had decreased slightly in length, what condition would he have?
A. Nearsightedness
B. Farsightedness
C. Neither nearsightedness nor farsightedness

Answers

Answer:

A. Nearsightedness

Explanation:

A nearsightedness is an eye defect that occurs when someone is only able to see close ranged object but not far distance object. According to the question, if the length of my eye decreases slightly as I age, this means there is a possibility that I will find it difficult to view a far distance object as I age.

At 70, once my eyes had decreased slightly in length, this means I will only be able to see close ranged object but not far distant object, showing that I am now suffering from nearsightedness according to its definition above.

If the person knows that the monkey is going to drop from the tree at the same instant that the person launches the food, how should the person aim the arrow containing the food?

Answers

Answer:

The options are

A. He should aim it at the monkey

B. He should aim it below the monkey

C. He should aim it above the monkey

D. None of the above

The answer is A. He should aim it at the monkey

This is because the monkey has a large surface area and a bigger body mass. This will make aiming the food at the monkey feasible in it getting it as it could use other parts of the body to get the food aimed at it. The monkey won’t reach the food when falling if it is aimed above it. It also won’t get to the it when it is shot at below it.

A computer has a mass of 3 kg. What is the weight of the computer?
A. 288 N.
B. 77.2 N
C. 3N
D. 29.4 N

Answers

Answer:

29.4 N

Option D is the correct option.

Explanation:

Given,

Mass ( m ) = 3 kg

Acceleration due to gravity ( g ) = 9.8 m/s²

Weight ( w ) = ?

Now, let's find the weight :

[tex]w \: = \: m \times g[/tex]

plug the values

[tex] = 3 \times 9.8[/tex]

Multiply the numbers

[tex] = 29.4 \: [/tex] Newton

Hope this helps!!

best regards!!

Inductance is usually denoted by L and is measured in SI units of henries (also written henrys, and abbreviated H), named after Joseph Henry, a contemporary of Michael Faraday. The EMF E produced in a coil with inductance L is, according to Faraday's law, given by
E=−LΔIΔt.
Here ΔI/Δt characterizes the rate at which the current I through the inductor is changing with time t.
Based on the equation given in the introduction, what are the units of inductance L in terms of the units of E, t, and I (respectively volts V, seconds s, and amperes A)?
What EMF is produced if a waffle iron that draws 2.5 amperes and has an inductance of 560 millihenries is suddenly unplugged, so the current drops to essentially zero in 0.015 seconds?

Answers

Answer:

Explanation:

E= −L ΔI / Δt.

L = E Δt / ΔI

Hence the unit of inductance may be V s A⁻¹

or volt s per ampere .

In the given case

change in current ΔI = - 2.5 A

change in time = .015 s

L = .56 H

E = − L ΔI / Δt.

= .56 x 2.5 / .015

= 93.33 V .

A record player rotates a record at 45 revolutions per minute. When the record player is switched off, it makes 4.0 complete turns at a constant angular acceleration before coming to rest. What was the magnitude of the angular acceleration (in rads/s2) of the record as it slowed down

Answers

Answer:

The  angular acceleration is [tex]\alpha = 0.4418 \ rad /s^2[/tex]

Explanation:

From the question we are told that

      The  angular speed is [tex]w_f = 45 \ rev / minutes = \frac{45 * 2 * \pi }{60 }= 4.713 \ rad/s[/tex]

       The  angular displacement is  [tex]\theta =4 \ rev = 4 * 2 * \pi = 25.14 \ rad[/tex]

From the first equation of motion we can define the movement of the record as

      [tex]w_f ^2 = w_o ^2 + 2 * \alpha * \theta[/tex]

Given that the record started from rest [tex]w_o = 0[/tex]

So

       [tex]4.713^2 = 2 * \alpha * 25.14[/tex]

        [tex]\alpha = 0.4418 \ rad /s^2[/tex]

A current carrying loop of wire lies flat on a table top. When viewed from above, the current moves around the loop in a counterclockwise sense.
(a) For points OUTSIDE the loop, the magnetic field caused by this current:________.
a. points straight up.
b. circles the loop in a clockwise direction.
c. circles the loop in a counterclockwise direction.
d. points straight down.
e. is zero.
(b) For points INSIDE the loop, the magnetic field caused by this current:________.
a. circles the loop in a counterclockwise direction.
b. points straight up.
c. points straight down.
d. circles the loop in a clockwise direction.
e. is zero

Answers

Answer:

D &B

Explanation:

Using Fleming right hand rule that States that if the fore-finger, middle finger and the thumb of left hand are stretched mutually perpendicular to each other, such that fore-finger points in the direction of magnetic field, the middle finger points in the direction of the motion of positive charge, then the thumb points to the direction of the force

A 20 g bullet strikes a 1.5 kg wood block and becomes embedded in it (all horizontal motion). The coefficient of friction between the block and the surface is 0.3 and the impact makes the block move a distance of 7 m before it comes to rest. What was the muzzle speed (in m/s) of the bullet? Report your answer with two significant figures.

Answers

Answer:

Explanation:

Kinetic frictional force acting on the block = μ mg

where μ is coefficient of friction , m is mass of block.

.3 x 1.5 x 9.8 = 4.41 N .

Let v be the velocity of bullet + block after collision

kinetic energy of composite mass after the strike

= 1 /2 x 1.52 x v²

this will be equal to work done by friction .

.76 v² = 4.41 x 7

v² = 40.62

v = 6.37 m /s

Now we can obtain muzzle speed of bullet by applying conservation of momentum .

Let this speed be u

initial momentum of bullet

= .02 x u

final momentum of composite mass

= 1.52 x 6.37

.02 u = 1.52 x 6.37

u = 484.12 m /s .

= 480 m /s ( in two significant figures )

As light shines from air to another medium, i = 26.0 º. The light bends toward the normal and refracts at 32.0 º. What is the index of refraction? A. 1.06 B. 0.944 C. 0.827 D. 1.21

Answers

Explanation:

It is given that,

Angle of incidence from air to another medium, i = 26°

The angle of reflection, r = 32°

We need to find the refractive index of the medium. The ratio of sine of angle of incidence to the sine of angle of reflection is called refractive index. It can be given by :

[tex]n=\dfrac{\sin i}{\sin r}\\\\n=\dfrac{\sin (26)}{\sin (32)}\\\\n=0.82[/tex]

So, the index of refraction is 0.82. Hence, the correct option is C.

A millionairess was told in 1992 that she had exactly 15 years to live. However, if she immediately takes off, travels away from the Earth at 0.8 c and then returns at the same speed, the last New Year's Day the doctors expect her to celebrate is:

Answers

Answer:

The expected year is 2017.

Explanation:

Total years that the millionaire to live = 15 years

Travel away from the earth at  = 0.8 c

This is a time dilation problem so if she travels at 0.8 c then her time will pass at slower. Below is the following calculation:

[tex]T = \frac{T_o}{ \sqrt{1-\frac{V^2}{c^2}}} \\T = \frac{15}{ \sqrt{1-\frac{0.8^2}{c^2}}} \\T = 25 years[/tex]

Thus the doctors are expecting to celebrate in the year, 1992 + 25 = 2017

A cylindrical shell of radius 7.00 cm and length 2.59 m has its charge uniformly distributed on its curved surface. The magnitude of the electric field at a point 20.1 cm radially outward from its axis (measured from the midpoint of the shell) is 36.0 kN/C.
A) Use approximate relationships to find the net charge on the shell.
B) Use approximate relationships to find the electric field at a point 4.00 cm from the axis, measured radially outward from the midpoint of the shell.

Answers

the answer is c yw :D

Zack is driving past his house. He wants to toss his physics book out the window and have it land in his driveway. If he lets go of the book exactly as he passes the end of the driveway. Should he direct his throw outward and toward the front of the car (throw 1), straight outward (throw 2), or outward and toward the back of the car (throw 3)? Explain.

Answers

Answer:

Zack should direct his throw outward and toward the back of the car.

Explanation:

As the car is moving forward, the book will be thrown with a forward component. Therefore, throwing this book backwards at a constant speed would cancel the motion of the car, allowing the book to have a greater chance of ending on the driveway. I say a greater chance as Zack may not have the exact timings as to land the book in his driveway. That too he may not have thrown the book with the right momentum.

The solution is throw 3.

I say a greater chance as Zack may not have the exact timings as to land the book in his driveway. That too he may not have thrown the book with the right momentum as the skydivers.

Which statement best applies Newton’s laws of motion?

The statement that best applies Newton’s laws of motion to explain the skydiver’s motion is that an upward force balances the downward force of gravity on the skydiver. Newton's 3rd law often applies to skydiving.

When gravity is not acting upon the skydivers they would continue moving in the direction the vehicle they jumped from was moving. If no air resistance takes place, then the skydivers would still accelerating at 9.8 m/s until they hit the ground.

The skydiver after leaving the aircraft will accelerates downwards due to the force of gravity usually as there is no air resistance acting in the upwards direction, and there is a resultant force acting downwards, the skydiver will accelerates towards the ground.

Therefore, I say a greater chance as Zack may not have the exact timings as to land the book in his driveway. That too he may not have thrown the book with the right momentum as the skydivers.

Learn more about skydiver on:

https://brainly.com/question/29253407

#SPJ6

A 285-kg object and a 585-kg object are separated by 4.30 m. (a) Find the magnitude of the net gravitational force exerted by these objects on a 42.0-kg object placed midway between them.

Answers

Answer:

The magnitude of the net gravitational force exerted by these objects on a 42.0-kg object is 1.818 x 10⁻⁷ N

Explanation:

Given;

first object with mass, m₁ = 285 kg

second object with mass, m₂ = 585 kg

distance between the two objects, r = 4.3 m

The midpoint between the two objects = r/₂ = 4.3 /2 = 2.15 m

Gravitational force between the first object and the 42 kg object;

[tex]F = \frac{GMm}{r^2}[/tex]

where;

G = 6.67 x 10⁻¹¹ Nm²kg⁻²

[tex]F = \frac{6.67*10^{-11} *285*42}{2.15^2} \\\\F = 1.727*10^{-7} \ N[/tex]

Gravitational force between the second object and the 42 kg object

[tex]F = \frac{6.67*10^{-11} *585*42}{2.15^2} \\\\F = 3.545*10^{-7} \ N[/tex]

Magnitude of net gravitational force exerted on 42kg object;

F = 3.545x 10⁻⁷ N  -  1.727 x 10⁻⁷ N

F = 1.818 x 10⁻⁷ N

Therefore, the magnitude of the net gravitational force exerted by these objects on a 42.0-kg object is 1.818 x 10⁻⁷ N

A Young'sdouble-slit interference experiment is performed with monochromatic light. The separation between the slits is 0.44 mm. The interference pattern on the screen 4.2 m away shows the first maximum 5.5 mm from the center of the pattern. What is the wavelength of the light in nm

Answers

Answer:

Explanation:

The double slit interference phonemene is described for the case of constructive interference

          d sin θ= m λ                   (1)

let's use trigonometry to find the sinus

        tan θ = y / L

in general in interference phenomena the angles are small

       tan θ = sin θ / cos θ = sin θ

 

The double slit interference phonemene is described for the case of constructive interference

          d sin θ = m lam                    (1)

let's use trigonometry to find the sinus

        tan θ = y / L

in general in interference phenomena the angles are small

       tan θ = sin θ / cos θ = sin θ

we substitute

      sin θ = y / L

we substitute in equation 1

         d y / L = m λ

         λ = dy / L m

let's reduce the magnitudes to the SI system

  d = 0.44 mm = 0.44 10⁻³ m

  y = 5.5 mm = 5.5 10⁻³ m

  L = 4.2m

  m = 1

let's calculate

        λ = 0.44  10⁻³ 5.5 10⁻³ / (4.2 1)

         

        λ = 5.76190 10-7 m

let's reduce to num

  lam = 5.56190 10-7 m (109 nm / 1m)

  lam = 556,190 nmtea

we substitute

      without tea = y / L

we substitute in equation 1

         d y / L = m lam

         lam = dy / L m

let's reduce the magnitudes to the SI system

  d = 0.44 me = 0.44 10-3 m

  y = 5.5 mm = 5.5 10-3

  L = 4.2m

  m = 1

let's calculate

        lam = 0.44 10⁻³  5.5 10⁻³ / (4.2 1)

         

        lam = 5.76190 10⁻⁷ m

let's reduce to num

  lam = 5.56190 10⁻⁷ m (109 nm / 1m)

  lam = 556,190 nm

Other Questions
how are mass and weight affected in chemical reactions? Which statement best describes the rhetorical technique used in this excerpt? He appeals to logos by referring to two hundred years ago. He uses parallelism with the repetition of the word too. He appeals to ethos by showing he cares about Americans. He employs understatement by saying that many feel burdened. Is 210879 divisible by 3?PLEASE HELPP Will give the brains of me brains and my brains and maby ur brain to u how many brains can i give u if u ask this quetion right? I NEED HELP :_( Which of the following points is in the solution set of y > -x2 + 5? (0, 5) (2, 4) (1, 3) How did the reformation impact the history of Europe A company is evaluating the use of insurance to mitigate its risk in the event of a market downturn. The company estimates that it has a total risk of 20% impact to its net income if a market downturn occurs, and the company currently has a net income of $150,000. At what cost should the company take out insurance to mitigate this risk? Suppose that a wing component on an aircraft is fabricated from an aluminum alloy that has a plane-strain fracture toughness of 26.0 MPa m0.5. It has been determined that fracture results at a stress of 112 MPa when the maximum internal crack length is 8.6 mm. For this same component and alloy, compute the stress level at which fracture will occur for a critical internal crack length of 3.0 mm. Read the passage from Part of the Stew. On the morning of January 8, 1815, the Redcoats made their attack. Mama and I woke up to the sound of it. It was like thunder that rolled on and on, and we held hands as we thought of Pa and our friends. Then, suddenly, everything was silent. It felt like forever as we waited for news. Finally, word came around that the British had raised the white flag of surrender. The use of first-person point of view helps engage readers by allowing them to experience how the narrator feels about the battle. the narrators pa feels about the battle. the narrators friend feels about the battle. the narrators mama feels about the battle. The probability that two independent events both occur is the sum of the probabilities of each independent event. 4. When choosing a card randomly from a deck of cards, choosing a 5 or a spade are not plato said the act of writing something down is basically the decision to ___ ___ On a part-time job, you are asked to bring a cylindrical iron rod of density 7800 kg/m 3 kg/m3 , length 81.2 cmcm and diameter 2.60 cmcm from a storage room to a machinist. Calculate the weight of the rod, www. Assume the free-fall acceleration is ggg = 9.80 m/s2m/s2 . For a hypothesis test of H0: p = 0.40 against the alternative Ha: p > 0.40, the z test statistic is found to be 2.25. What can be said about this finding? a. The finding is significant at both = 0.05 and = 0.01. b. The finding is significant at = 0.05 but not at = 0.01. c. The finding is significant at = 0.01 but not at = 0.05. d. The finding is not significant at = 0.05 and = 0.01. e. The finding is inconclusive because we don't know the value of p-hat. Merlins paper discusses two types of data: artifactual and paleoethnobotanical. Give specific examples of each and describe the sources of data and the type of information you can gain. As light shines from air to another medium, i = 26.0 . The light bends toward the normal and refracts at 32.0 . What is the index of refraction? A. 1.06 B. 0.944 C. 0.827 D. 1.21 Dr. Chen studies how people grow and change during late adolescence and young adulthood. Dr. Doherty focuses on several traits that distinguish one person from another. Dr. Chen is a(n) _____ psychologist; Dr. Doherty is a _____. What is the height of the prism if there is 30 square centimeters and the volume is 90 cubic centimeters Which of these is the opposite reciprocal of 3/4 ACEG is a paralellogram. BKD, HJF and CKJG are straight lines. Find the values of x and y In Bhagalpur (Bihar), when a child born, the family plants ten saplings of trees to highlight how such traditions help in protecting nature. you have 20 points