Answer:
[tex]D=29.7648m[/tex]
Explanation:
From the question we are told that
Speed of the particle[tex]V=0.624c[/tex]
Lifetime [tex]t=159ns[/tex]
Generally the equation for distance is mathematically given by
[tex]D=Vt[/tex]
[tex]D=0.624c*159*10^-^9[/tex]
[tex]D=0.624*3*10^8*159*10^-^9[/tex]
[tex]D=29.7648m[/tex]
Therefore the markers are [tex]D=29.7648m[/tex] apart
If an ice cube has a mass of 5g and is left in the sun in a beaker, what will happen to its mass?
Answer:
The mass remains the same
Explanation:
An ice cube of mass 5g left in the sun in a beaker will have no mass difference.
For this system, mass is conserved.
The ice cube begins to melt and the state changes. The state change is from solid to liquid. Since no mass is loss, the mass of the liquid formed and the ice will remain the same. In retrospect, this physical change ensures that mass is conserved.Help please..................
Why could it be argued that the respiratory system is most critical to sustaining life?
Explanation:
Energy is the most important ingredient for life. Organisms use energy in diverse ways. Scientifically, energy is defined as the ability to do work. Without this ability, organisms would not exist.
So, the most important process is one that can furnish the body with energy.
The respiratory system happens to be the one that furnishes the body with energy. During respiration, the energy needs of the body is met by series of processes. Oxygen is taken in and use to liberate calories from chemical substances packed with energy. So, without respiration, the bodily energy demands will not be met.The force f is given in terms of time t and displacement X by the equation F= Asin Bx +C sin dt. What is the dimension of D/B?
Answer:
Here's what I think,
A_Trigonometric_ratio (whatever)
The general form of sin/cos/tan(angle).
So here as in the general form the "whatever" is always an "angle" input which (may sound a bit unfair but) is a dimensionless quantity.
As mentioned in your question,
F= Asin(Bt) + C cos (Dy)
Dimentions of these terms will be same (by homogenity of dimensions).
So what we gotta do here is make Bt and Dy dimensionless for this whole equation to work.
According to your question t is time,
So to make Bt dimensionless,
B must be equal to inverse of time i.e T^(-1)
Using the same process on Dy, gives inverse of length i.e L^(-1)
So,
B= M^(0)L^(0)T^(-1)
D = M^(0)L^(-1)T^(0)
The dimension of D/B then will be M^(0)L^(-1)T^(1)
A 146N force is needed to pull a 350 N block across a horizontal surface at a constant speed by a rope making an angle of 50 degrees with the floor. Find the coefficient of friction.
Answer:
F = force
f = friction
u = coefficient of friction
R = normal reaction force
a = Acceleration
m = mass of block
g = gravity
f = uR
F = Ma
Say the block is moving to the right.
The 146N force thus acts to the right, and the friction force to the left, since it resists movement.
The 146N force acts to the right, but the horizontal component of it is 146 cos 50 = 93.84: So this is the force to the right.
Since F = uR and we're trying to find u, we need both F and R. R is easy to get since it is just m x g. This is in fact already given as the weight 350N. So R = 350.
The block is moving at a constant speed, so the force to the right must = the force to the left.
F = ma, so 93.84 - f = (350/g) x 0
This means f must be 93.84 also.
so we have f = uR,
93.84 = u x 350
so u = 0.268 or
0.27 to 2dp.
Hope you understand this.
Explanation:
The coefficient of friction is 0.26 if the 46N force is needed to pull a 350 N block across a horizontal surface at a constant speed by a rope making an angle of 50 degrees with the floor.
What is the friction force?It is a type of opposition force acting on the surface of the body that tries to oppose the motion of the body. its unit is Newton (N). Mathematically it is defined as the product of the coefficient of friction and normal reaction.
We know:
f = uR
Where f is the friction force and u is the coefficient of friction, R is the normal reaction force.
The horizontal component of 146N is:
F' = 146cos50°
F' = 93.84 N
Since F = mass×acceleration
Because the block is traveling at a constant speed, the right-hand force must equal the left-hand force.
F' = f = 93.84 N
93.84 = u x 350 (R = 350N)
u = 0.26
Thus, the coefficient of friction is 0.26 if the 46N force is needed to pull a 350 N block across a horizontal surface at a constant speed by a rope making an angle of 50 degrees with the floor.
Learn more about the friction force here:
https://brainly.com/question/1714663
#SPJ2
A motorcycle moving 18.8 m/s has
57800 J of KE. What is its mass?
Answer:
m = 327.07 kg
Explanation:
Given that,
Kinetic energy of a motorcycle, E = 57800 J
Velocity of the motorcycle, v = 18.8 m/s
We need to find the mass of the motorcycle. The kinetic energy of an object is given by :
[tex]E=\dfrac{1}{2}mv^2[/tex]
m is mass
[tex]m=\dfrac{2E}{v^2}\\\\m=\dfrac{2\times 57800 }{(18.8)^2}\\\\m=327.07\ kg[/tex]
So, the mass of the motorcycle is 327.07 kg.
Explain how scientific knowledge develops through making observations about the natural world. FOR SCIENCE!
Answer number four because it is one of the factors evaluating science
Scientists create models to better understand Earth. Which evidence has led scientists to conclude that there are different layers within Earth's interior?
A.analysis of seismic wave data
B.measurement of Earth's diameter
C.temperatures taken within each layer
D.rock samples taken from Earth's core
Answer:
it is A or D
Explanation:
Answer:
ANswer:A
Explanation:
An inductor is connected to a 120-V, 60-Hz supply. The current in the circuit is 2.4 A. What is the inductive reactance
Answer:
Inductive reactance is 50.00 ohms
Explanation:
Given the following data;
Voltage = 120v
Frequency = 60Hz
Current = 2.4 A
To find the inductive reactance;
Inductive reactance, XL = V/I
Where;
XL represents the inductive reactance. V represents the voltage. I represents the current.Substituting into the equation, we have;
XL = 120/2.4
XL = 50.00 ohms
Potential energy diagrams for a particle are useful in predicting the motion of that particle.
a. True
b. False
Answer:
True
Explanation:
If you travel from Tucson to Argentina, you will see some different constellations in the night sky. true or false
Answer:
its true!!
Explanation: have a nice day !!
A small lead ball, attached to a 1.10-m rope, is being whirled in a circle that lies in the vertical plane. The ball is whirled at a constant rate of three revolutions per second and is released on the upward part of the circular motion when it is 1.3 m above the ground. The ball travels straight upward. In the absence of air resistance, to what maximum height above the ground does the ball rise
Answer:
1.84 m
Explanation:
For the small lead ball to be balanced at the tip of the vertical circle just before it is released, the reaction force , N equal the weight of the lead ball W + the centripetal force, F. This normal reaction ,N also equals the tension T in the string.
So, T = mg + mrω² = ma where m = mass of small lead ball, g = acceleration due to gravity = 9.8 m/s², r = length of rope = 1.10 m and ω = angular speed of lead ball = 3 rev/s = 3 × 2π rad/s = 6π rad/s = 18.85 rad/s and a = acceleration of normal force. So,
a = g + rω²
= 9.8 m/s² + 1.10 m × (18.85 rad/s)²
= 9.8 m/s² + 390.85 m/s²
= 400.65 m/s²
Now, using v² = u² + 2a(h₂ - h₁) where u = initial velocity of ball = rω = 1.10 m × 18.85 rad/s = 20.74 m/s, v = final velocity of ball at maximum height = 0 m/s (since the ball is stationary at maximum height), a = acceleration of small lead ball = -400.65 m/s² (negative since it is in the downward direction of the tension), h₁ = initial position of lead ball above the ground = 1.3 m and h₂ = final position of lead ball above the ground = unknown.
v² = u² + 2a(h₂ - h₁)
So, v² - u² = 2a(h₂ - h₁)
h₂ - h₁ = (v² - u²)/2a
h₂ = h₁ + (v² - u²)/2a
substituting the values of the variables into the equation, we have
h₂ = 1.3 m + ((0 m/s)² - (20.74 m/s)²)/2(-400.65 m/s²)
h₂ = 1.3 m + [-430.15 (m/s)²]/-801.3 m/s²
h₂ = 1.3 m + 0.54 m
h₂ = 1.84 m
A cart's initial velocity is +3.0 meters per second. What is its final velocity after accelerating at a rate of 1.5 m/s2 for 8.0 seconds?
A. 36 m/s
B. 9 m/s
C. 72 m/s
D. 15 m/s
Answer:
V = 15m/s
Explanation:
Given the following data;
Initial velocity = 3m/s
Time = 8secs
Acceleration = 1.5m/s²
To find the final velocity, we would use the first equation of motion;
V = U + at
Substituting into the equation, we have
V = 3 + 1.5*8
V = 3 + 12
V = 15m/s
The resistance of a wire depends on its length i and on its cross sectional area A the resistance is
Answer:
The resistance of a wire is directly proportional to its length and inversely proportional to its cross-sectional area
Explanation:
In a particular crash test, an automobile of mass 1577 kg collides with a wall and bounces back off the wall. The x components of the initial and final speeds of the automobile are 17 m/s and 1.5 m/s, respectively. If the collision lasts for 0.18 s, find the magnitude of the impulse due to the collision. Answer in units of kg · m/s.
Answer:
Ft=24,443.5 kgm/s
Explanation:
Step one
Given data
Mass of automobile m=1577kg
Initial Velocity u=17m/s
Final Velocity v=1.5m/s
Time t=0.18s
Step two
From the impulse and momentum equation
Ft=mΔv
Substitute
Ft=1577*(17-1.5)
Ft=1577*15.5
Ft=24,443.5 kgm/s
what makes 97 of the water on earth unfit for drinking
Answer:
presence of salt in oceanic water makes 97 of the water on the earth unfit for drinking
Water runs out of a horizontal drainpipe at the rate of 135 kg/min. It falls 3.1 m to the ground. Assuming the water doesn't splash up, what average force does the water exert on the ground
Answer:
The average force exerted by the water on the ground is 17.53 N.
Explanation:
Given;
mass flow rate of the water, m' = 135 kg/min
height of fall of the water, h = 3.1 m
the time taken for the water to fall to the ground;
[tex]h = ut + \frac{1}{2}gt^2\\\\h = 0 + \frac{1}{2}gt^2\\\\t = \sqrt{\frac{2\times 3.1}{9.8} } \\\\t = 0.795 \ s[/tex]
mass of the water;
[tex]m = m't\\\\m = 135 \ \frac{kg}{min} \ \times \ 0.795 \ s \ \times \ \frac{1 \ \min}{60 \ s} \ = 1.789 \ kg[/tex]
the average force exerted by the water on the ground;
F = mg
F = 1.789 x 9.8
F = 17.53 N
Therefore, the average force exerted by the water on the ground is 17.53 N.
A projectile is launched at an angle of 60° from the horizontal and at a velocity of
12.0 m/s. What is the horizontal velocity of the projectile? *
Answer:
60*12.0= 720 = v/60 * 12.0 squared which is 1,728
Explanation:
Horizontal velocity component: Vx = V * cos(α)
The horizontal velocity of the projectile is 6.0m/s
If a projectile is launched at an angle from the horizontal and at a velocity v, the horizontal velocity of the projectile is expressed as:
[tex]v_x =vcos \theta[/tex]
Given the following parameters
v = 12.0m/s
[tex]\theta=60^0[/tex]
Substitute the given parameters into the formula to have:
[tex]v_x=12.0cos60\\v_x=12.0(0.5)\\v_x=6.0m/s\\[/tex]
Hence the horizontal velocity of the projectile is 6.0m/s
Learn more here: https://brainly.com/question/23916021
A block weighing 9.3 N requires a force of 3.7 N to push it along at constant velocity. What is the coefficient of friction for the surface
Answer:
0.398
Explanation:
According to friction, the frictional force is directly proportional to the normal reaction
Ff = nR
Ff is the frictional force
n is the coefficient of friction
R is the reaction
Reaction is equal to the weight
R= W = 9.3N
Fm = Ff = 3.7N
Fm is the moving force
Get the coefficient of friction
n = Ff/R
n = 3.7/9.3
n = 0.398
Hence the coefficient of friction for the surface is 0.398
if a tomato is considered a fruit... then is ketchup considered a smoothie?
Answer:
depends... do you add suger to your ketchup?
Explanation:
Which is greater, the energy of one photon of orange light or the energy of one quantum ofradiation having a wavelength of 3.36 * 10^-9
The question is incomplete, here is the complete question:
Which is greater, the energy of one photon of orange light or the energy of one quantum of radiation having a wavelength of [tex]3.36\times 10^{-9}m[/tex]
Answer: The energy of one quantum of radiation having wavelength [tex]3.36\times 10^{-9}m[/tex] is greater than the energy of 1 photon of orange light.
Explanation:
To calculate the energy of one photon, we use the Planck's equation:
[tex]E=\frac{N_Ahc}{\lambda}[/tex]
where,
E = energy of radiation
[tex]N_A[/tex] = Avogadro's number = [tex]6.022\times 10^{23}mol^{-1}[/tex]
h = Planck's constant = [tex]6.626\times 10^{-34}Js[/tex]
c = speed of light = [tex]3\times 10^8 m/s[/tex]
[tex]\lambda}[/tex] = wavelength of radiation
For orange light:For 1 photon, the term [tex]N_A[/tex] does not appear
[tex]\lambda}[/tex] = 620 nm = [tex]620\times 10^{-9}m[/tex] (Conversion factor: [tex]1nm=10^{-9}m[/tex] )
Putting values in above equation, we get:
[tex]E=\frac{6.626\times 10^{-34}Js\times 3\times 10^8m/s}{620\times 10^{-9}m}\\\\E=3.206\times 10^{-19}J[/tex]
For one quantum of radiation:[tex]\lambda}[/tex] = [tex]3.36\times 10^{-9}m[/tex]
Putting values in above equation, we get:
[tex]E=\frac{6.022\times 10^{23}mol^{-1}\times 6.626\times 10^{-34}Js\times 3\times 10^8m/s}{3.36\times 10^{-9}m}\\\\E=3.56\times 10^{7}J/mol[/tex]
Hence, the energy of one quantum of radiation having wavelength [tex]3.36\times 10^{-9}m[/tex] is greater than the energy of 1 photon of orange light.
What can we conclude from observing an attractive force between a positively charged rod and some object
Answer: that the object is negatively charged.
Explanation:
We know that the force between objects that have the same type of charge is a repulsive force, while for objects with an opposite charge, the force is attractive.
In this case, we know that we have an attractive force between an object and a positively charged rod.
Then the only conclusion we can take in this situation is that the object is negatively charged.
Brainliest brainliest help help help mememememememme
Answer:
????????????????????,
Explanation:
I need points sorry
Answer:
honestly this was so long ago can i get brainliest i need 2 more until i am at expert level
Explanation:
When you graph displacement vs. time, velocity is represented by
A. the x-intercept of the graph
B. the y-intercept of the graph
C. the slope of the graph
D. the curve of the graph
A hammer strikes a nail with a 10 N force for 0.01 seconds. Calculate the impulse of the hammer.
Answer:
0.1Ns
Explanation:
Impulse is the product of Force and time
Impulse = Force * Time
Given
Force = 10N
Time = 0.01s
Substitute into the formula
Impulse = 10 * 0.01
Impulse = 10 * 1/100
Impulse = 10/100
Impulse = 0.1Ns
hence the impulse of the hammer is 0.1Ns
When the 5.0 kg cylinder fell 100 m, the final temperature of the water was °C and the change in temperature was °C.
When the 5.0 kg cylinder fell 500 m, the final temperature of the water was °C and the change in temperature was °C.
Answer:
26.17
1.17
30.86
5.86
Explanation:
said they were correct on my assignment
All of the following are ways in which sports psychologists help athletes except __________.
A.
staying motivated
B.
managing fear of failure
C.
improving performance
D.
enhancing memory
Please select the best answer from the choices provided
A
B
C
D
Answer:
D-Enhancing memory
Explanation:
An electric motor spins at 1000 rpm and is slowing down at a rate of 10 t rad/s2 ; where t is measured in seconds. (a) If the motor radius is 7.165 cm, what is the tangential component of acceleration at the edge of the motor at t = 1.5 seconds? (b) How long will it take, in seconds, to decrease its angular velocity by 75%?
Answer:
a) The tangential component of acceleration at the edge of the motor at [tex]t = 1.5\,s[/tex] is -1.075 meters per square second.
b) The electric motor will take approximately 3.963 seconds to decrease its angular velocity by 75 %.
Explanation:
The angular aceleration of the electric motor ([tex]\alpha[/tex]), measured in radians per square second, as a function of time ([tex]t[/tex]), measured in seconds, is determined by the following formula:
[tex]\alpha = -10\cdot t\,\left[\frac{rad}{s^{2}} \right][/tex] (1)
The function for the angular velocity of the electric motor ([tex]\omega[/tex]), measured in radians per second, is found by integration:
[tex]\omega = \omega_{o} - 5\cdot t^{2}\,\left[\frac{rad}{s} \right][/tex] (2)
Where [tex]\omega_{o}[/tex] is the initial angular velocity, measured in radians per second.
a) The tangential component of aceleration ([tex]a_{t}[/tex]), measured in meters per square second, is defined by the following formula:
[tex]a_{t} = R\cdot \alpha[/tex] (3)
Where [tex]R[/tex] is the radius of the electric motor, measured in meters.
If we know that [tex]R = 7.165\times 10^{-2}\,m[/tex], [tex]\alpha = 10\cdot t[/tex] and [tex]t = 1.5\,s[/tex], then the tangential component of the acceleration at the edge of the motor is:
[tex]a_{t} = (7.165\times 10^{-2}\,m)\cdot (-10)\cdot (1.5\,s)[/tex]
[tex]a_{t} = -1.075\, \frac{m}{s^{2}}[/tex]
The tangential component of acceleration at the edge of the motor at [tex]t = 1.5\,s[/tex] is -1.075 meters per square second.
b) If we know that [tex]\omega_{o} = 104.720\,\frac{rad}{s}[/tex] and [tex]\omega = 26.180\,\frac{rad}{s}[/tex], then the time needed is:
[tex]26.180\,\frac{rad}{s} = 104.720\,\frac{rad}{s}-5\cdot t^{2}[/tex]
[tex]5\cdot t^{2} = 104.720\,\frac{rad}{s}-26.180\,\frac{rad}{s}[/tex]
[tex]t^{2} = \frac{104.720\,\frac{rad}{s}-26.180\,\frac{rad}{s} }{5}[/tex]
[tex]t = \sqrt{\frac{104.720\,\frac{rad}{s}-26.180\,\frac{rad}{s} }{5} }[/tex]
[tex]t \approx 3.963\,s[/tex]
The electric motor will take approximately 3.963 seconds to decrease its angular velocity by 75 %.
Allen and Jason are chucking a speaker around. On one particular throw, Allen throws the speaker, which is playing a pure tone of frequency f, at a speed of 10 m/s directly towards Jason, but his aim is a bit off. As a result, Jason runs forward towards the speaker at a speed of 6 m/s before catching it. Then, the frequency that Jason hears while running can be written as (m/n)f Hz, where m and n are relatively prime positive integers. Compute m n.
Answer:
Explanation:
We shall apply Doppler's effect of sound .
speaker is the source , Jason is the observer . Source is moving at 10 m /s , observer is moving at 6 m/s .
apparent frequency = [tex]f_o\times\frac{V+v_o}{ V-v_s}[/tex]
V is velocity of sound , v₀ is velocity of observer and v_s is velocity of source and f_o is real frequency of source .
Here V = 340 m/s , v₀ is 6 m/s , v_s is 10 m/s . f_o = f
apparent frequency = [tex]f\times \frac{340+6}{340-10}[/tex]
= [tex]f\times \frac{346}{330}[/tex]
So m = 346 , n = 330 .
is college football playoffs the best way to determine the national champion?
Answer:
No it is Not because win ratio is differs say Ohio only won 7 out of 7 games and e
was in the playoffs while Alabama won 11 out of 11 games so it is harder to win 11 out of 1a games and it is easier to win 7 out of 7
Explanation: would like brainliest but u don’t have to