Answer:
A) Chlorine (Cl)
B) Cobalt (Co)
C) Caesium (Cs)
Hope this helps.
The abbreviated electron configurations that was given in the question belongs to
Chlorine (Cl)
Cobalt (Co)
Caesium (Cs) respectively.
Electronic configurations can be regarded as the electronic structure, which is the way an electrons is arranged in energy levels towards an atomic nucleus.The electron configurations is very useful when describing the orbitals of an atom in its ground state.To calculate an electron configuration, we can put the periodic table into sections, and this section will represent the atomic orbitals which is the regions that house the electrons. Groups one of the period table and two belongs to s-block, group 3 through 12 belongs to the d-block, while 13 to 18 can be attributed to p-block ,The rows that is found at bottom are the f-blockTherefore, electron configurations explain orbitals of an atom when it is in it's ground state.
Learn more at:https://brainly.com/question/21940070?referrer=searchResults
A sample of neon gas at a pressure of 0.609 atm and a temperature of 25.0 °C, occupies a volume of 19.9 liters. If the gas is compressed at constant temperature to a
volume of 12.7 liters, the pressure of the gas sample will be
atm.
Answer:
The pressure of the gas sample will be 0.954 atm.
Explanation:
Boyle's law states that the pressure of a gas in a closed container is inversely proportional to the volume of the container, when the temperature is constant. That is, if the pressure increases, the volume decreases; conversely if the pressure decreases, the volume increases.
Boyle's law is expressed mathematically as:
Pressure * Volume = constant
o P * V = k
To determine the change in pressure or volume during a transformation at constant temperature, the following is true:
P1 · V1 = P2 · V2
That is, the product between the initial pressure and the initial volume is equal to the product of the final pressure times the final volume.
In this case:
P1= 0.609 atmV1= 19.9 LP2=?V2= 12.7 LReplacing:
0.609 atm* 19.9 L= P2* 12.7 L
Solving:
[tex]P2=\frac{0.609 atm* 19.9 L}{12.7 L}[/tex]
P2= 0.954 atm
The pressure of the gas sample will be 0.954 atm.
A strontium hydroxide solution is prepared by dissolving 10.60 gg of Sr(OH)2Sr(OH)2 in water to make 47.00 mLmL of solution.What is the molarity of this solution? Express your answer to four significant figures and include the appropriate units.
Answer:
Approximately [tex]1.854\; \rm mol\cdot L^{-1}[/tex].
Explanation:
Note that both figures in the question come with four significant figures. Therefore, the answer should also be rounded to four significant figures. Intermediate results should have more significant figures than that.
Formula mass of strontium hydroxideLook up the relative atomic mass of [tex]\rm Sr[/tex], [tex]\rm O[/tex], and [tex]\rm H[/tex] on a modern periodic table. Keep at least four significant figures in each of these atomic mass data.
[tex]\rm Sr[/tex]: [tex]87.62[/tex].[tex]\rm O[/tex]: [tex]15.999[/tex].[tex]\rm H[/tex]: [tex]1.008[/tex].Calculate the formula mass of [tex]\rm Sr(OH)_2[/tex]:
[tex]M\left(\rm Sr(OH)_2\right) = 87.62 + 2\times (15.999 + 1.008) = 121.634\; \rm g \cdot mol^{-1}[/tex].
Number of moles of strontium hydroxide in the solution[tex]M\left(\rm Sr(OH)_2\right) =121.634\; \rm g \cdot mol^{-1}[/tex] means that each mole of [tex]\rm Sr(OH)_2[/tex] formula units have a mass of [tex]121.634\; \rm g[/tex].
The question states that there are [tex]10.60\; \rm g[/tex] of [tex]\rm Sr(OH)_2[/tex] in this solution.
How many moles of [tex]\rm Sr(OH)_2[/tex] formula units would that be?
[tex]\begin{aligned}n\left(\rm Sr(OH)_2\right) &= \frac{m\left(\rm Sr(OH)_2\right)}{M\left(\rm Sr(OH)_2\right)}\\ &= \frac{10.60\; \rm g}{121.634\; \rm g \cdot mol^{-1}} \approx 8.71467\times 10^{-2}\; \rm mol\end{aligned}[/tex].
Molarity of this strontium hydroxide solutionThere are [tex]8.71467\times 10^{-2}\; \rm mol[/tex] of [tex]\rm Sr(OH)_2[/tex] formula units in this [tex]47\; \rm mL[/tex] solution. Convert the unit of volume to liter:
[tex]V = 47\; \rm mL = 0.047\; \rm L[/tex].
The molarity of a solution measures its molar concentration. For this solution:
[tex]\begin{aligned}c\left(\rm Sr(OH)_2\right) &= \frac{n\left(\rm Sr(OH)_2\right)}{V}\\ &= \frac{8.71467\times 10^{-2}\; \rm mol}{0.047\; \rm L} \approx 1.854\; \rm mol \cdot L^{-1}\end{aligned}[/tex].
(Rounded to four significant figures.)
Which of the following elements is in the same family as fluorine?
a. silicon
b. antimony
O c. iodine
O d. arsenic
e. None of these.
Answer:
c iodine
Explanation:
fluorine is a halogen group element like Bromine, Iodine,Astatine,Chloride
Carbon-14 has a half-life of 5720 years and this is a fast-order reaction. If a piece of wood has converted 75 % of the carbon-14, then how old is it?
Answer:
11445.8years
Explanation:
Half-life of carbon-14 = 5720 years
First we have to calculate the rate constant, we use the formula :
cetylene gas is often used in welding torches because of the very high heat produced when it reacts with oxygen gas, producing carbon dioxide gas and water vapor. Calculate the moles of oxygen needed to produce of water.
Answer:
0.60 mol
Explanation:
There is some info missing. I think this is the original question.
Acetylene gas is often used in welding torches because of the very high heat produced when it reacts with oxygen gas, producing carbon dioxide gas and water vapor. Calculate the moles of oxygen needed to produce 1.5 mol of water.
Step 1: Given data
Moles of water required: 1.5 mol
Step 2: Write the balanced equation
C₂H₂(g) + 2.5 O₂(g) ⇒ 2 CO₂(g) + H₂O(g)
Step 3: Calculate the moles of oxygen needed to produce 1.5 mol of water
The molar ratio of O₂ to H₂O is 2.5:1. The moles of oxygen needed to produce 1.5 mol of water are (1/2.5) × 1.5 mol = 0.60 mol
Determine the volume occupied by 10 mol of helium at 27 ° C and 82 atm
please.
Answer:
3.00 L
Explanation:
Convert the pressure to Pascals.
P = 82 atm × (101325 Pa/atm)
P = 8,308,650 Pa
Convert temperature to Kelvins.
T = 27°C + 273
T = 300 K
Use ideal gas law:
PV = nRT
(8,308,650 Pa) V = (10 mol) (8.314 J/mol/K) (300 K)
V = 0.00300 m³
If desired, convert to liters.
V = (0.00300 m³) (1000 L/m³)
V = 3.00 L
Answer:
[tex]\large \boxed{\text{3.0 L}}[/tex]
Explanation:
[tex]\begin{array}{rcl}pV &=& nRT\\\text{82 atm} \times V & = & \text{10 mol} \times \text{0.082 06 L}\cdot\text{atm}\cdot\text{K}^{-1}\text{mol}^{-1} \times \text{300.15 K}\\82V & = & \text{246 L}\\V & = & \textbf{3.0 L} \\\end{array}\\\text{The volume of the balloon is $\large \boxed{\textbf{3.0 L}}$}[/tex]
11. How did the solubility product constant Ksp of KHT in pure water compare to its solubility product constant Ksp of KHT in KCl solution? Are these results what you would expect? Why?
Answer:
Explanation:
KHT is a salt which ionises in water as follows
KHT ⇄ K⁺ + HT⁻
Solubility product Kw= [ K⁺ ] [ HT⁻ ]
product of concentration of K⁺ and HT⁻ in water
In KCl solution , the solubility product of KHT will be decreased .
In KCl solution , there is already presence of K⁺ ion in the solution . So
in the equation
[ K⁺ ] [ HT⁻ ] = constant
when K⁺ increases [ HT⁻ ] decreases . Hence less of KHT dissociates due to which its solubility decreases . It is called common ion effect . It is so because here the presence of common ion that is K⁺ in both salt to be dissolved and in solvent , results in decrease of solubility of the salt .
Un globo lleno de helio tenia un volumen de 8.5 L en el suelo a 20°C y a una presión de 750 torr. Cuando se le soltó, el globo se elevo a una altitud donde la temperatura era de -20°C y la presión de 425 torr, ¿Cuál era el volumen del gas del globo en estas condiciones?
Answer:
El volumen del gas era 12.95 L
Explanation:
Se relaciona la presión y el volumen mediante la ley de Boyle, que dice:
“El volumen ocupado por una determinada masa gaseosa a temperatura constante, es inversamente proporcional a la presión”
La ley de Boyle se expresa matemáticamente como: P*V=k
Por otro lado, la Ley de Charles consiste en la relación que existe entre el volumen y la temperatura absoluta de una cierta cantidad de gas ideal, el cual se mantiene a una presión constante. Esta ley dice que cuando la cantidad de gas y de presión se mantienen constantes, el cociente que existe entre el volumen y la temperatura siempre tendrán el mismo valor:
[tex]\frac{V}{T}=k[/tex]
Por último, la Ley de Gay Lussac dice que la temperatura absoluta y la presión son directamente proporcionales. Es decir, cuando se mantiene todo lo demás constante, mientras suba la temperatura de un gas subirá también su presión. Y mientras la temperatura del gas baje, lo mismo ocurrirá con la presión:
[tex]\frac{P}{T}=k[/tex]
Combinado las mencionadas tres leyes se obtiene:
[tex]\frac{P*V}{T} =k[/tex]
Cuando se desean estudiar dos diferentes estados, uno inicial y una final de un gas, se puede aplicar:
[tex]\frac{P1*V1}{T1} =\frac{P2*V2}{T2}[/tex]
Recordando que la temperatura debe usarse en grados Kelvin, conoces los siguientes datos:
P1: 750 torrV1: 8.5 LT1: 20°C= 293°K (siendo 0°C=273°K)P2: 425 torrV2: ?T2: -20°C= 253 °KReemplazando:
[tex]\frac{750 torr*8.5 L}{293K} =\frac{425 torr*V2}{253 K}[/tex]
Resolviendo:
[tex]V2=\frac{750 torr*8.5 L}{293K} *\frac{253 K}{425 torr}[/tex]
V2= 12.95 L
El volumen del gas era 12.95 L